STM32L412CBT6 - 80MHz Cortex-M4 MCU 128KB | ST
Артикул: STM32L412CBT6 ✓ АктивенSTM32L412CBT6 Обзор
An ultra-low-power microcontroller is a semiconductor device designed to complete control tasks while minimizing energy consumption during idle, sleep, and active operating periods. Within the embedded-system hierarchy, a microcontroller integrates a processor core, flash memory, RAM, clocks, communications peripherals, timers, and general-purpose input/output functions onto one package. The STM32L412 series uses the Arm Cortex-M4 32-bit RISC core, a widely adopted architecture for real-time control systems that balance processing capability, software ecosystem maturity, and low-power operation.
The STM32L412CBT6 runs at up to 80 MHz and provides 128 KB of internal flash memory. Its 48-LQFP package is 7 x 7 mm, making it considerably smaller than many leaded microcontroller packages while retaining a conventional surface-mount assembly format. Mouser identifies this device as an ultra-low-power MCU with FPU, Arm Cortex-M4, 80 MHz operation, 128 KB flash, and USB capability. These characteristics support compact control boards that need moderate computation, serial communication, and efficient peripheral integration.
The 32-bit Cortex-M4 processing core supports deterministic embedded-control workflows and includes an Arm floating-point unit according to the distributor listing. A single package therefore provides the central processing unit, nonvolatile program storage, GPIO, timers, serial interfaces, USB, and low-power control resources. This integration reduces the number of discrete components required for compact sensor nodes, USB-connected accessories, instrumentation modules, and low-power IoT terminals.
Typical uses include USB peripheral control, low-power sensor hubs, compact industrial monitoring equipment, consumer accessories, communication modules, and general-purpose embedded control. The 80 MHz operating rate provides practical margin for protocol handling, control-loop execution, and human-interface tasks. The 128 KB flash capacity supports embedded firmware, configuration data, and application code, while the 48-LQFP outline simplifies inspection and rework compared with very small leadless packages.
PCB design should preserve clean routing for USB and clock signals, provide the decoupling network specified by the manufacturer, and verify all exposed-pin assignments against the device pinout. Because the part is offered in a 7 x 7 mm LQFP, pad geometry and paste design should follow the package drawing rather than relying on a generic footprint. Confirm the required peripheral mix, firmware support, temperature grade, and USB implementation before releasing a production design.
This product record combines manufacturer positioning, verified distributor specifications, package details, practical design guidance, and same-brand drop-in alternatives. It also highlights which parameters require confirmation from the full STM32L412 technical documentation, helping engineers evaluate the MCU without relying on abbreviated catalog descriptions alone.
Аналоги без доработки для STM32L412CBT6 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с STM32L412CBT6 (тот же форм-фактор и посадочное место) — отличается по Package.
STM32L412CBT3
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
STM32L412CBT7
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
STM32L412CBT8
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
STM32L422CBT6
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
STM32L412CBT6 Максимальные параметры и электрические характеристики
| Product Type | Ultra-low-power 32-bit microcontroller |
| Processor Core | Arm Cortex-M4 32-bit RISC |
| Maximum CPU Frequency | 80 MHz |
| Internal Flash Memory | 128 KB |
| Flash Organization | 128K x 8 bits |
| Floating-Point Unit | Present |
| USB Capability | Supported |
| Корпус | 48-LQFP, 7 x 7 mm |
| Число выводов | 48 pins |
| Тип монтажа | Surface mount |
Руководство по цоколевке STM32L412CBT6 в корпусе 48-lqfp, 7 x 7 mm
Цоколевка для STM32L412CBT6 (корпус 48-lqfp, 7 x 7 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для STM32L412CBT6.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
STM32L412CBT6 подходит для 6 применениеs: USB Sensor Hubs, Compact Industrial Monitoring, Low-Power IoT Endpoints, Instrumentation and Data Acquisition, Consumer USB Accessories, Battery-Powered Portable Equipment.
USB Sensor Hubs
The STM32L412CBT6 fits compact USB-connected sensor hubs because it combines an 80 MHz Arm Cortex-M4 core, 128 KB flash, USB capability, and 48-pin integration in a 7 x 7 mm LQFP. The processor can sample inputs, run filtering and configuration logic, and present a device interface to a host while the compact outline supports space-constrained enclosures. A USB implementation still needs correct data-line routing, connector protection, common-mode considerations, and a stable supply. Use the manufacturer reference circuit and pin description when assigning USB and power pins.
Рекомендуется
Compact Industrial Monitoring
For compact industrial monitoring equipment, the STM32L412CBT6 provides an 80 MHz 32-bit control core, 128 KB of nonvolatile program memory, and integrated peripherals in a 7 x 7 mm LQFP. It can coordinate sensor conditioning, digital filtering, local alarms, data logging, and host communication while preserving board area. The ultra-low-power positioning of the STM32L412 family is useful for distributed nodes that spend much of their operating life in reduced-power states. Production qualification, transient immunity, calibration strategy, and extended-temperature requirements must be evaluated separately from the base device specifications.
Рекомендуется
Low-Power IoT Endpoints
The STM32L412CBT6 suits low-power IoT endpoints that need local control and USB commissioning but do not require a high-end radio integrated into the same package. Its 80 MHz Cortex-M4 core can handle protocol framing, sensor fusion, and application logic, while 128 KB flash stores firmware and configuration data. The 48-LQFP 7 x 7 mm package reduces occupied board area compared with larger leaded devices and remains straightforward to assemble. Battery-life analysis should include microcontroller sleep current, wake-up intervals, radio behavior, regulator efficiency, and USB leakage rather than relying on the 80 MHz operating frequency alone.
Рекомендуется
Instrumentation and Data Acquisition
The STM32L412CBT6 can serve as the control processor in compact instrumentation and data-acquisition modules that combine digital sensors, calibration, filtering, and a communications interface. Its 32-bit Cortex-M4 architecture at up to 80 MHz provides useful throughput for deterministic control loops and serial-data handling, while 128 KB flash provides room for embedded application code. The 48-LQFP format supports compact yet inspectable assemblies. Signal-chain integrity remains critical: isolate analog inputs appropriately, keep sensitive routing away from switching nodes, use suitable grounding, and verify conversion and timing specifications in the full technical documentation.
Рекомендуется
Consumer USB Accessories
The STM32L412CBT6 is appropriate for small consumer accessories requiring USB connectivity, configuration storage, and compact embedded control. Its 128 KB flash can hold application firmware and device settings, while the 80 MHz Cortex-M4 core supports protocol handling, button or display logic, and responsive control. The 7 x 7 mm LQFP reduces board footprint without resorting to a very small leadless package. Designers should plan USB impedance-controlled routing, ESD and surge protection, connector mechanics, shielding where needed, and validated firmware updates before committing the device to a consumer enclosure.
Рекомендуется
Battery-Powered Portable Equipment
The STM32L412CBT6 can act as the central controller in battery-powered portable equipment where board area, USB charging or maintenance connectivity, and efficient low-power behavior are priorities. The ultra-low-power STM32L412 family positioning supports systems that alternate between brief active processing and extended low-power periods, while the 128 KB flash accommodates embedded control code. The 48-LQFP package remains compact and visually inspectable after assembly. Actual battery performance depends on the regulator, load switching, sensor leakage, USB attachment, and duty cycle. Validate each low-power mode and wake-up path on the assembled board.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для STM32L412CBT6 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | STM32L412CBT3 | STM32L412CBT7 | STM32L412CBT8 | STM32L422CBT6 |
|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-LQFP, 7 x 7 mm | 48-LQFP, 7 x 7 mm | 48-LQFP, 7 x 7 mm | 48-LQFP, 7 x 7 mm | 48-LQFP, 7 x 7 mm |
| Processor Core | Arm Cortex-M4 32-bit RISC | Arm Cortex-M4 32-bit RISC | Arm Cortex-M4 32-bit RISC | Arm Cortex-M4 32-bit RISC | Arm Cortex-M4 32-bit RISC |
| Maximum CPU Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| USB Capability | Supported | Supported | Supported | Supported | Supported |
| Floating-Point Unit | Present | Present | Present | Present | Present |
| Temperature-Grade Suffix | 6 | 3 | 7 | 8 | 6 |
| Product Family | STM32L412CB | STM32L412CB | STM32L412CB | STM32L412CB | STM32L422CB |
Ключевые отличия
- Combines USB, an FPU, and low-power Cortex-M4 control in a compact package (против STM32L422CBT6)
- Direct same-family PCB reuse with temperature-grade flexibility (против STM32L412CBT8)
- 80 MHz processing with 128 KB flash for embedded firmware (против STM32L412CBT3)
Заметки по проектированию
Create the PCB footprint from the official STM32L412CBT6 48-LQFP package drawing, including the 7 x 7 mm body, lead span, pitch, and recommended copper land pattern. Confirm pin-1 orientation against the manufacturer pinout before placing the device. Reserve unobstructed routing space for power, ground, reset, and debug signals. Although LQFP leads are easier to inspect than leadless leads, incorrect land geometry can still cause solder bridges or poor connections and must be checked by PCB inspection.
Implement the manufacturer-recommended decoupling network with the shortest practical return path to ground. Place bulk and high-frequency capacitors at the points where the device power pins connect to the planes, and avoid routing sensitive inputs through the same noisy region as USB or switching-converter connections. Validate startup, brownout, and shutdown behavior across the intended supply range. The 80 MHz CPU rating does not describe operating-current performance by itself, so calculate regulator capacity and thermal rise from the actual voltage, load, and utilization.
For USB operation, use the manufacturer reference layout and preserve a continuous ground reference beneath the data path. Match routing geometry to the board’s dielectric characteristics, keep the route short, and provide the required ESD protection near the connector. Keep clocks, high-speed edges, and switching nodes away from sensitive analog inputs. Review rise and fall times at the actual GPIO loading because an 80 MHz processor clock does not directly determine the signal-integrity margin of an arbitrary external interface.
Do not treat an LQFP package, identical pin count, or shared processor core as proof of drop-in equivalence. Verify every power pin, alternate function, exposed electrical limit, clock configuration, peripheral mapping, and software startup sequence against the full manufacturer documentation. For same-family suffix alternatives, confirm the temperature-grade requirements and ordering information. For a different STM32L4 device, rebuild and regression-test firmware because peripheral behavior, interrupts, memory organization, and low-power transitions may differ.
Информация о соответствии
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration appears in the product records. Confirm the current material and environmental declarations with STMicroelectronics before production release.