STM32L471RET6 - ARM Cortex-M4F 80MHz MCU | STMicroelectronics
Артикул: STM32L471RET6 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $11.41 | $11,41 |
| 10 | $10.5 | $105,00 |
| 100 | $9.2 | $920,00 |
| 500 | $8.1 | $4.050,00 |
| 1.000 | $7.25 | $7.250,00 |
STM32L471RET6 Обзор
What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brains of countless electronic devices, from automotive engine control units to wearable health monitors. In the system hierarchy, a microcontroller is a type of embedded processor, which falls under the broader category of integrated circuits (ICs) and semiconductors. The STM32L471RET6 is a mid-range MCU in the STM32L4 family, positioned between the lower-power STM32L0/L1 series and the higher-performance STM32F4 series, offering a balance of energy efficiency and processing capability.
Key features of the STM32L471RET6 include its ultra-low-power modes (Sleep, Low-power run, Low-power sleep, Stop 0/1/2, Standby, and Shutdown) with current consumption as low as 100 nA in Shutdown mode. The device supports a wide supply voltage range of 1.71V to 3.6V, making it suitable for battery-powered applications. It also features a 12-bit ADC with hardware oversampling, a 12-bit DAC, and a true random number generator (TRNG). The FPU accelerates mathematical computations, which is beneficial for signal processing and control algorithms. The MCU is manufactured using ST's 90 nm process technology, enabling low dynamic power consumption.
Technical depth: The STM32L471RET6 is built around the ARM Cortex-M4F core with DSP instructions and a single-precision FPU. It includes a memory protection unit (MPU) for enhanced security and reliability. The device supports up to 8x32-bit timers, including a low-power timer (LPTIM) that can operate in Stop mode. Communication peripherals include 3x USART, 3x SPI, 3x I2C, 1x CAN, 1x USB OTG FS, and 1x SAI (serial audio interface). The ADC has a resolution of 12 bits with up to 16 external channels and can operate at up to 5 Msps. The DAC has two channels with 12-bit resolution. The device also includes a flexible memory controller (FMC) for external memory expansion, supporting SRAM, PSRAM, NOR, and NAND flash.
Typical applications include industrial sensors and actuators, smart meters, medical devices (e.g., glucose monitors, infusion pumps), wearable fitness trackers, IoT nodes, and portable instrumentation. The ultra-low-power modes and rich analog peripherals make it ideal for battery-operated devices that require long battery life and precise analog measurements. For example, in a smart meter, the STM32L471RET6 can handle metrology calculations, communication protocols, and display control while consuming minimal power in sleep mode between measurements.
Design consideration: When designing with the STM32L471RET6, pay attention to the power supply decoupling. Place a 100 nF ceramic capacitor close to each VDD pin and a 4.7 uF capacitor at the main power input. For the VDDA pin, use a dedicated 1 uF capacitor to ensure stable analog performance. Also, configure the clock system carefully: the device can run from an internal 16 MHz HSI oscillator, but for precise timing, use an external 8 MHz crystal with appropriate load capacitors. The boot pins (BOOT0 and BOOT1) must be set correctly for the desired boot mode (flash, system memory, or SRAM).
Аналоги без доработки для STM32L471RET6 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с STM32L471RET6 (тот же форм-фактор и посадочное место) — отличается по ADC Resolution, DAC Resolution, Flash Memory, Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
STM32L471RGT6
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
STM32L476RGT6
✅ Прямая замена✓ В наличии
$3.86 / шт.
Открыть даташит →STM32L475RGT6
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
STM32L471RET6TR
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
GD32F450RET6
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
STM32L471RET6 Максимальные параметры и электрические характеристики
| Core | ARM Cortex-M4F with FPU |
| Максимальная тактовая частота | 80 MHz |
| Flash Memory | 512 KB |
| SRAM | 128 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Корпус | LQFP-64 (10x10 mm, 0.5 mm pitch) |
| Тип монтажа | Surface Mount |
| ADC Resolution | 12-bit |
| ADC Channels | 16 external channels |
| DAC Resolution | 12-bit |
| DAC Channels | 2 |
| Communication Interfaces | 3x USART, 3x SPI, 3x I2C, 1x CAN, 1x USB OTG FS, 1x SAI |
| Timers | 8x 32-bit timers, 1x low-power timer |
| Диапазон рабочих температур | -40C to +85C |
| Статус RoHS | Compliant |
Конфигурация выводов STM32L471RET6
| Контакт 1 | VBAT — Battery backup supply for RTC and backup registers |
| Контакт 2 | PC14 — GPIO or OSC32_IN |
| Контакт 3 | PC15 — GPIO or OSC32_OUT |
| Контакт 4 | PF0 — GPIO or OSC_IN |
| Контакт 5 | PF1 — GPIO or OSC_OUT |
| Контакт 6 | NRST — Reset (active low) |
| Контакт 7 | PC0 — GPIO or ADC input |
| Контакт 8 | PC1 — GPIO or ADC input |
| Контакт 9 | PC2 — GPIO or ADC input |
| Контакт 10 | PC3 — GPIO or ADC input |
| Контакт 11 | VDD — Digital power supply |
| Контакт 12 | VSS — Ground |
| Контакт 13 | PA0 — GPIO or ADC input |
| Контакт 14 | PA1 — GPIO or ADC input |
| Контакт 15 | PA2 — GPIO or USART2_TX |
| Контакт 16 | PA3 — GPIO or USART2_RX |
| Контакт 17 | PA4 — GPIO or DAC_OUT1 |
| Контакт 18 | PA5 — GPIO or DAC_OUT2 |
| Контакт 19 | PA6 — GPIO or SPI1_MISO |
| Контакт 20 | PA7 — GPIO or SPI1_MOSI |
| Контакт 21 | PC4 — GPIO or ADC input |
| Контакт 22 | PC5 — GPIO or ADC input |
| Контакт 23 | PB0 — GPIO or ADC input |
| Контакт 24 | PB1 — GPIO or ADC input |
| Контакт 25 | PB2 — GPIO or BOOT1 |
| Контакт 26 | PB10 — GPIO or I2C2_SCL |
| Контакт 27 | PB11 — GPIO or I2C2_SDA |
| Контакт 28 | VDD — Digital power supply |
| Контакт 29 | VSS — Ground |
| Контакт 30 | PB12 — GPIO or SPI2_NSS |
| Контакт 31 | PB13 — GPIO or SPI2_SCK |
| Контакт 32 | PB14 — GPIO or SPI2_MISO |
| Контакт 33 | PB15 — GPIO or SPI2_MOSI |
| Контакт 34 | PC6 — GPIO or USART6_TX |
| Контакт 35 | PC7 — GPIO or USART6_RX |
| Контакт 36 | PC8 — GPIO or USART3_TX |
| Контакт 37 | PC9 — GPIO or USART3_RX |
| Контакт 38 | PA8 — GPIO or USB_OTG_FS_SOF |
| Контакт 39 | PA9 — GPIO or USB_OTG_FS_VBUS |
| Контакт 40 | PA10 — GPIO or USB_OTG_FS_ID |
| Контакт 41 | PA11 — GPIO or USB_OTG_FS_DM |
| Контакт 42 | PA12 — GPIO or USB_OTG_FS_DP |
| Контакт 43 | PA13 — GPIO or SWDIO |
| Контакт 44 | PA14 — GPIO or SWCLK |
| Контакт 45 | PA15 — GPIO or JTDI |
| Контакт 46 | PC10 — GPIO or USART4_TX |
| Контакт 47 | PC11 — GPIO or USART4_RX |
| Контакт 48 | PC12 — GPIO or USART5_TX |
| Контакт 49 | PD2 — GPIO or USART5_RX |
| Контакт 50 | PB3 — GPIO or SPI1_SCK |
| Контакт 51 | PB4 — GPIO or SPI1_NSS |
| Контакт 52 | PB5 — GPIO or I2C1_SMBA |
| Контакт 53 | PB6 — GPIO or I2C1_SCL |
| Контакт 54 | PB7 — GPIO or I2C1_SDA |
| Контакт 55 | BOOT0 — Boot mode selection |
| Контакт 56 | PB8 — GPIO or CAN_RX |
| Контакт 57 | PB9 — GPIO or CAN_TX |
| Контакт 58 | VDD — Digital power supply |
| Контакт 59 | VSS — Ground |
| Контакт 60 | PC13 — GPIO or RTC_TAMP1 |
| Контакт 61 | PC14 — GPIO or OSC32_IN |
| Контакт 62 | PC15 — GPIO or OSC32_OUT |
| Контакт 63 | VDDA — Analog power supply |
| Контакт 64 | VSSA — Analog ground |
Типичное применение
STM32L471RET6 подходит для 6 применениеs: Industrial Sensors and Actuators, Smart Meters, Medical Devices, Wearable Fitness Trackers, IoT Nodes, Portable Instrumentation.
Industrial Sensors and Actuators
The STM32L471RET6 is ideal for industrial sensors and actuators due to its ultra-low-power modes and rich analog peripherals. Its 12-bit ADC with hardware oversampling enables precise sensor readings, while the multiple communication interfaces (USART, SPI, I2C, CAN) allow seamless integration with industrial networks. The wide supply voltage range (1.71V to 3.6V) accommodates various power sources, and the low-power modes extend battery life in remote monitoring systems. In a typical industrial sensor node, the MCU reads analog sensor data, processes it with the FPU, and transmits results over CAN or RS-485, all while consuming minimal power in sleep mode between measurements.
Рекомендуется
Smart Meters
The STM32L471RET6 is well-suited for smart meters, handling metrology calculations, communication protocols, and display control. Its 12-bit ADC with up to 16 channels can sample voltage and current waveforms for energy measurement, while the FPU accelerates the required mathematical computations. The ultra-low-power modes allow the meter to operate on battery power for extended periods, with current consumption as low as 100 nA in Shutdown mode. The device's communication interfaces (USART, SPI, I2C) enable connectivity with PLC modems, RF modules, or wired networks for data reporting. In a typical smart meter, the MCU periodically wakes up, performs measurements, updates the display, and communicates data, then returns to low-power sleep to conserve energy.
Рекомендуется
Medical Devices
The STM32L471RET6 is suitable for medical devices such as glucose monitors and infusion pumps, where low power consumption and precise analog measurements are critical. Its 12-bit ADC with hardware oversampling provides accurate sensor readings, while the FPU supports complex signal processing algorithms. The device's low-power modes enable long battery life, essential for portable medical devices. The multiple communication interfaces allow data transfer to external displays or wireless modules. In a glucose monitor, the MCU reads the sensor signal, processes it to calculate glucose levels, and displays the result, all while consuming minimal power to extend battery life between charges.
Рекомендуется
Wearable Fitness Trackers
The STM32L471RET6 is ideal for wearable fitness trackers due to its ultra-low-power operation and small LQFP-64 package. The device can run on a coin cell battery for months, thanks to its low-power modes and efficient 90 nm process technology. Its 12-bit ADC can interface with accelerometers and heart-rate sensors, while the FPU processes the data for activity tracking. The communication interfaces (I2C, SPI) connect to sensors and displays. In a typical fitness tracker, the MCU continuously samples motion data, processes it to detect steps or activity, and communicates with a smartphone via Bluetooth, all while minimizing power consumption to extend battery life.
Рекомендуется
IoT Nodes
The STM32L471RET6 is a strong choice for IoT nodes, offering a balance of performance and energy efficiency. Its ultra-low-power modes allow battery-powered operation for years, while the FPU and DSP instructions handle sensor data processing. The device supports multiple communication interfaces (USART, SPI, I2C, USB) for connecting to various wireless modules (LoRa, BLE, Wi-Fi). In a typical IoT node, the MCU wakes up periodically, reads sensors, processes data, and transmits it over a wireless link, then returns to sleep. The wide supply voltage range (1.71V to 3.6V) accommodates different battery configurations, and the rich analog peripherals enable direct sensor interfacing.
Рекомендуется
Portable Instrumentation
The STM32L471RET6 is well-suited for portable instrumentation, such as handheld multimeters and data loggers, due to its low power consumption and high-resolution ADC. The 12-bit ADC with hardware oversampling provides accurate measurements, while the FPU supports complex calculations. The device's low-power modes extend battery life, and the multiple communication interfaces allow data transfer to a PC or smartphone. In a portable data logger, the MCU samples analog signals, stores data in flash memory, and communicates via USB, all while operating from a battery. The wide supply voltage range ensures compatibility with various battery chemistries.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для STM32L471RET6 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | STM32L471RGT6 | STM32L476RGT6 | STM32L475RGT6 | GD32F450RET6 |
|---|---|---|---|---|---|
| Package | LQFP-64 | LQFP-64 | LQFP-64 | LQFP-64 | LQFP-64 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | GigaDevice |
| Core | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F |
| Max Clock Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 200 MHz |
| Flash Memory | 512 KB | 1 MB | 1 MB | 1 MB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 192 KB |
| Supply Voltage Range | 1.71V to 3.6V | 1.71V to 3.6V | 1.71V to 3.6V | 1.71V to 3.6V | 2.6V to 3.6V |
| ADC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
Ключевые отличия
- Ultra-low-power modes with 100 nA shutdown current (против GD32F450RET6)
- Wide supply voltage range (1.71V to 3.6V) (против GD32F450RET6)
- Rich analog peripherals (12-bit ADC, 12-bit DAC, comparators, op-amps) (против STM32L475RGT6)
Заметки по проектированию
Ensure proper power supply decoupling: place a 100 nF ceramic capacitor close to each VDD pin and a 4.7 uF capacitor at the main power input. For the VDDA pin, use a dedicated 1 uF capacitor to ensure stable analog performance. This reduces noise and improves ADC accuracy.
For the LQFP-64 package, ensure adequate ground plane and thermal vias under the exposed pad (if present) to improve heat dissipation. Keep high-speed signal traces short and avoid routing them near the crystal oscillator pins to minimize EMI.
Configure the clock system carefully: the device can run from an internal 16 MHz HSI oscillator, but for precise timing, use an external 8 MHz crystal with appropriate load capacitors. Also, set the boot pins (BOOT0 and BOOT1) correctly for the desired boot mode (flash, system memory, or SRAM) to avoid unexpected startup behavior.
Информация о соответствии
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified; for automotive, consider STM32L4 series with AEC-Q100 qualification.
