Microchip Technology

SY88843VMI - 3.2Gbps CML Limiting Post Amplifier | Microchip

Артикул: SY88843VMI ✓ Активен
3.3 V or 5 V Vdss 16-MLF Package
MOQ: 1 |

SY88843VMI Обзор

The Microchip Technology SY88843VMI is a 3.3V/5V, 3.2Gbps CML low-power limiting post amplifier with TTL shutdown, packaged in a 16-MLF surface-mount package. It is designed for fiber-optic receiver signal chains, where it follows a transimpedance amplifier and provides amplitude limiting, noise reduction, and differential CML output.

A limiting post amplifier is a specialized amplifier IC placed at the output of a receiver’s front end. The wider category belongs to the hierarchy of amplifier ICs, signal-conditioning ICs, interface ICs, and semiconductors. In optical receivers, such a stage limits the signal amplitude before it passes to a clock-recovery or digital-decision circuit, helping reduce the effects of noise and signal variation.

The SY88843VMI operates from 3.3V or 5V, supports data rates up to 3.2Gbps, and produces a CML output. Its low-power architecture is intended for communication equipment where the post-amplifier stage must combine high data throughput with low energy consumption. An integrated TTL shutdown function provides a hardware control path for disabling the circuit when the receiver does not need active amplification.

The 16-MLF package offers a compact surface-mount implementation for high-speed optical-interface boards. CML signaling is characteristic of many high-speed serial links because it uses differential signaling and can support reliable data transmission at multi-gigabit rates. The TTL shutdown interface allows system-level control without requiring the shutdown command to be generated in the CML signal domain.

Typical applications include fiber-optic receiver modules, optical communication transceivers, telecommunications equipment, and parallel optical links. In these systems, the SY88843VMI can be placed after a transimpedance amplifier so that the amplified signal is conditioned before limiting and subsequent digital processing. The 3.2Gbps capability aligns with 2.5Gbit/s-class and other multi-gigabit receiver interfaces when the complete channel and circuit implementation support the required data rate.

PCB design must preserve short, impedance-controlled differential routes between the limiting stage and the receiving logic. Decoupling should be placed close to the supply pins, while the CML output network should follow the reference circuit and transmission-line geometry specified by the manufacturer. Differential trace length matching, return-path continuity, and controlled impedance are more important than general-purpose signal-tracing conventions at this data rate.

This product page combines the device description, package information, sourcing guidance, and application-specific design guidance with the technical characteristics required to identify the SY88843VMI. It supports engineers comparing 3.3V/5V limiting post amplifiers for high-speed fiber-optic receiver designs where CML output, 3.2Gbps operation, low power, and TTL shutdown are important selection criteria.

Аналоги без доработки для SY88843VMI — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Для этого товара нет аналогов без доработки.

Запросить аналоги

SY88843VMI Максимальные параметры и электрические характеристики

Product Type CML low-power limiting post amplifier
Напряжение питания 3.3 V or 5 V
Maximum Data Rate 3.2 Gbps
Output Logic CML
Shutdown Control TTL shutdown
Корпус 16-MLF
Тип монтажа Surface mount
Application Fiber-optic receiver signal chain

Руководство по цоколевке SY88843VMI в корпусе 16-mlf

Цоколевка для SY88843VMI (корпус 16-mlf). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 16-mlf для SY88843VMI

Нет подробных данных о распиновке для SY88843VMI.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

SY88843VMI подходит для 6 применениеs: Fiber-Optic Receiver Modules, Optical Communication Transceivers, Telecommunications Receive Links, Multi-Gigabit Optical Interface Boards, Optical Network Equipment, High-Speed Data Communications.

🌐

Fiber-Optic Receiver Modules

The SY88843VMI fits the post-amplifier position in a multi-gigabit fiber-optic receiver because it is designed for the linear output of a transimpedance amplifier. Its limiting function controls signal amplitude before the data reaches downstream decision or clock-recovery circuitry, while the 3.2Gbps capability supports high-speed optical interfaces. Operating from 3.3V or 5V allows integration into either 5V optical-engine sections or lower-voltage digital systems. The TTL shutdown input provides a direct system-control path when the receiver is idle, although the complete optical link still requires suitable transimpedance amplification, termination, decoupling, and controlled-impedance PCB routing.

🔧

Optical Communication Transceivers

The SY88843VMI can condition the recovered electrical signal in an optical transceiver designed for data rates up to 3.2Gbps. Placing the device after a suitable transimpedance amplifier allows it to limit amplitude variation and present a CML output to the receive-processing section. Its low-power design is useful in compact pluggable and embedded optical modules where every stage contributes to overall power budget. Both 3.3V and 5V operation are identified for the device, supporting different module power architectures. Signal-integrity implementation remains critical: differential routes should have controlled impedance, the supply bypass network should be compact, and the shutdown function should be sequenced to avoid invalid output states.

🌐

Telecommunications Receive Links

The SY88843VMI is applicable to telecommunications receive links that use a transimpedance-amplifier front end followed by a limiting stage. Its specified capability of 3.2Gbps covers high-speed serial channels when the complete receiver design meets the corresponding signal-integrity requirements. The CML output provides a differential interface for downstream digital circuitry, while the TTL shutdown control enables power-state management in line cards and communication modules. The device supports 3.3V or 5V rails, allowing designers to align it with the receiver subsystem rather than adding unnecessary level conversion. Board implementation should minimize trace discontinuities and maintain a continuous reference plane to limit reflections and preserve CML signal quality.

📡

Multi-Gigabit Optical Interface Boards

The SY88843VMI is suited to the receive-conditioning portion of a multi-gigabit optical interface board. Its 3.2Gbps rating provides a clear fit for systems operating at multi-gigabit serial rates, while the limiting post-amplifier architecture targets the signal produced by a transimpedance amplifier. The compact 16-MLF package supports dense receiver-board layouts without introducing a large through-hole component. A practical design must reserve adequate copper for return current, place bypass capacitance close to the device, and route the CML output as a controlled-impedance differential pair. The integrated TTL shutdown can be connected to receiver-state control logic to control operating state without a separate external shutdown translator.

🖥️

Optical Network Equipment

The SY88843VMI can be used in optical network equipment where a recovered high-speed signal requires limiting before digital processing. Its low-power limiting architecture is appropriate for line-card and aggregation equipment in which receive-channel power consumption affects thermal design. The device accepts operation from 3.3V or 5V, enabling placement near either the analog receive section or compatible digital subsystems. Its CML output supports differential high-speed routing, and TTL shutdown permits the channel to be disabled during unused or controlled operating intervals. Deployment decisions should include the manufacturer’s recommended circuit, validated impedance values, decoupling arrangement, and any unused-pin treatment to achieve repeatable performance across temperature and production tolerances.

🌐

High-Speed Data Communications

The SY88843VMI is applicable in high-speed data-communication receivers that use a transimpedance stage and require a limiting CML output. The 3.2Gbps maximum data rate aligns with communication links whose channel bandwidth and clock-recovery architecture can support the selected operating rate. Its low-power operation and TTL shutdown are useful in compact networking equipment where receiver channels may be enabled selectively. The signal path should be treated as controlled-impedance routing rather than a general-purpose digital connection. Maintain closely matched differential geometry, avoid unnecessary stubs, place decoupling near the supply connections, and follow the reference circuit for component placement. These practices reduce reflections and coupling that could undermine the limiting stage’s role in stabilizing the recovered signal.

What is the SY88843VMI used for?
The SY88843VMI is a low-power limiting post amplifier designed for fiber-optic receiver applications. It follows a transimpedance amplifier, limits the resulting signal amplitude, and provides a CML output suitable for high-speed receiver processing. The manufacturer describes the device as a 3.3V/5V, 3.2Gbps limiting post amplifier with TTL shutdown, making it suitable for multi-gigabit optical communication interfaces.
What is the data rate of the SY88843VMI?
The SY88843VMI supports data rates up to 3.2Gbps. This figure identifies its high-speed serial communication capability and distinguishes it from lower-rate general-purpose amplifiers. According to the Micrel Semiconductor manufacturer datasheet, the device is a 3.3V/5V CML limiting post amplifier designed for use with the linear output stage of a fiber-optic transimpedance amplifier.
What supply voltage does the SY88843VMI use?
The SY88843VMI operates from either 3.3V or 5V. These two supply choices support communication equipment with different rail architectures and allow the device to be used where a 5V supply is available or a lower-voltage 3.3V system is preferred. The manufacturer datasheet identifies the part specifically as a dual 3.3V/5V limiting post amplifier.
Where can the SY88843VMI datasheet PDF be downloaded?
The SY88843VMI datasheet PDF is available through the manufacturer-datasheet listing for the Micrel Semiconductor device. The document describes the 3.3V/5V, 3.2Gbps CML limiting post amplifier, TTL shutdown function, electrical characteristics, and application information. Use the manufacturer datasheet for the authoritative pin-description table, recommended circuit, and timing characteristics before assigning PCB connections.
Where is the SY88843VMI pinout located?
The SY88843VMI pinout is located in the pin-description table of the Micrel Semiconductor manufacturer datasheet. The device is supplied in a 16-MLF surface-mount package. Use the package drawing and pin table together to identify supply pins, ground connections, differential inputs, CML outputs, and the TTL shutdown control without relying on a generic package diagram.
What can replace the SY88843VMI?
No independently verified, pin-to-pin drop-in replacement for the SY88843VMI was identified. The SY88843VMI-TR designation refers to the ordering form of the same device, while SY88843VKITR is a kit rather than a drop-in amplifier. Before considering a functional replacement, verify the 16-MLF footprint, differential input arrangement, CML output levels, shutdown logic, data rate, supply current, and signal-integrity behavior.
Is the SY88843VMI suitable for a fiber-optic receiver?
Yes, the SY88843VMI is specifically suited to fiber-optic receiver signal chains. The manufacturer describes it as a post amplifier for use with the linear output of a transimpedance amplifier, where signal amplitude and noise can vary over time. Its 3.2Gbps capability, CML output, and TTL shutdown support high-speed optical-receiver designs when the surrounding circuit satisfies the device’s operating requirements.
SY88843VMI vs SY88843VMI-TR - which one should I select?
SY88843VMI and SY88843VMI-TR identify the same Micrel low-power CML limiting post amplifier, with the suffix difference reflecting the ordering or shipping format rather than a different amplifier specification. Both correspond to the 16-MLF device described as a 3.3V/5V, 3.2Gbps limiting post amplifier with TTL shutdown. Confirm the required production packing and ordering code with the manufacturer.
When should I choose the SY88843VMI over another CML post amplifier?
Choose the SY88843VMI when a receiver design specifically requires a 16-MLF CML limiting post amplifier supporting operation from 3.3V or 5V at rates up to 3.2Gbps, with a TTL shutdown input. The appropriate substitute must match the complete electrical interface, not merely the package count. Confirm gain, output amplitude, supply current, jitter contribution, and shutdown behavior in the manufacturer datasheet before approving a change.
How do I design the PCB layout for the SY88843VMI?
Design the SY88843VMI layout with short supply connections, local decoupling, continuous ground planes, and controlled-impedance differential routes. The CML output and high-speed receiver input should follow the reference topology and transmission-line geometry in the manufacturer datasheet. Keep test points and routing discontinuities away from sensitive differential paths, and match output and receiver trace geometry to minimize reflections.
What is the key specification of the SY88843VMI?
The key specifications of the SY88843VMI are a 3.2Gbps maximum data rate, 3.3V or 5V operation, CML output, TTL shutdown, and a 16-MLF package. It is a low-power limiting post amplifier intended for fiber-optic receivers following a transimpedance amplifier. These characteristics make it directly relevant to multi-gigabit optical-interface and telecommunications signal-conditioning designs.
Where can I buy the SY88843VMI online?
Use the Request a Quote form on this page to ask about SY88843VMI availability, ordering information, and current lead time. The quote request should include the exact SY88843VMI MPN, required quantity, and production package preference. Because this listing is quote-oriented, stock status should be confirmed through the form rather than inferred from an old catalog record.
What is the price of the SY88843VMI?
Current pricing for the exact SY88843VMI is handled through the Request a Quote form on this page. The form allows quantity and delivery requirements to be included with the request. Historical catalog pricing can be old and unsuitable for a production quotation, so request current commercial terms rather than using an archived unit-price record for planning.
What is the lead time and stock status for the SY88843VMI?
Request the current lead time and stock status for the SY88843VMI through the Request a Quote form on this page. Provide the required order quantity, target date, and 16-MLF packing requirement in the request. Stock should not be assumed because the availability of an older catalog part can vary with manufacturer inventory and component-planning conditions.
Does the SY88843VMI include TTL shutdown?
Yes, the SY88843VMI includes a TTL shutdown function. According to the Micrel Semiconductor manufacturer datasheet description, the part is a 3.3V/5V, 3.2Gbps CML low-power limiting post amplifier with TTL shutdown. This control input lets the receiver system disable the post-amplifier during an inactive state, which can help reduce unnecessary power consumption.

Справочные инженерные данные для SY88843VMI — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the SY88843VMI when designing the receive side of a fiber-optic link that uses a transimpedance amplifier followed by a limiting stage. Its defining fit is the combination of 3.3V/5V operation, operation up to 3.2Gbps, CML output, TTL shutdown, and a 16-MLF surface-mount package. The device is particularly relevant to optical modules, telecommunications receive links, and multi-gigabit interface boards where low-power signal conditioning is needed.

Do not treat an amplifier with a similar data rate as an automatic substitute. A valid drop-in choice must match the footprint, differential input arrangement, output levels and termination, shutdown polarity, gain, supply current, timing behavior, and temperature range. The available listing information does not establish any independent pin-compatible replacement, so new substitutions require a manufacturer cross-reference or a careful comparison with the SY88843VMI datasheet. For new production, use the Request a Quote form to confirm ordering code, packing, availability, and delivery requirements.

Сравнение с аналогами

Параметр Этот товар
Package 16-MLF
Brand Microchip Technology
Product Type Low-power limiting post amplifier
Supply Voltage 3.3 V or 5 V
Maximum Data Rate 3.2 Gbps
Output Logic CML
Shutdown Control TTL shutdown
Mounting Type Surface mount
Primary Application Fiber-optic receiver signal chain

Ключевые отличия

  • Purpose-built receiver signal-conditioning function (против SY88843VMI-TR)
  • Multi-voltage receiver integration (против SY88843VKITR)
  • Compact high-speed package (против SY88843VMI-TR)

Заметки по проектированию

Treat the CML output as a controlled-impedance differential connection. Keep the two lines closely matched, route them over a continuous reference plane, avoid stubs and test-point discontinuities where possible, and follow the manufacturer’s recommended termination arrangement. At multi-gigabit rates, small changes in trace geometry can create reflections that distort the recovered waveform or reduce timing margin at the receiving logic.

Place the supply bypass network immediately beside the SY88843VMI power and ground connections. Use the capacitor values and placement shown in the manufacturer’s recommended circuit, and keep the high-frequency return path compact so switching noise from other board circuitry does not couple into the limiting stage. The device supports 3.3V and 5V operation, but the selected rail must satisfy all timing, noise, and supply-current requirements for the complete design.

Do not substitute a similar CML amplifier solely because its data rate and package count appear compatible. Confirm differential input topology, CML output amplitude and termination, TTL shutdown polarity, supply current, gain, and propagation behavior from the manufacturer datasheet. Also verify the operating-rate margin of the transimpedance amplifier and downstream logic, since a 3.2Gbps device cannot correct an underdesigned analog channel or excessive jitter upstream.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The device is a communication amplifier IC rather than an automotive-qualified product. No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified.

Данные проверены: 2026-11-20 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

SY88843VMI datasheet SY88843VMI datasheet pdf SY88843VMI pinout SY88843VMI 16-MLF footprint SY88843VMI equivalent SY88843VMI replacement SY88843VMI cross reference SY88843VMI vs SY88843VMI-TR SY88843VMI price SY88843VMI stock Microchip SY88843VMI SY88843VMI 3.2Gbps CML amplifier SY88843VMI fiber optic receiver What is the SY88843VMI used for SY88843VMI TTL shutdown

Связанные компоненты & термины

Microchip Technology Micrel Semiconductor SY88843VMI SY88843VMI-TR SY88843VKITR limiting post amplifier fiber-optic receiver CML TTL shutdown transimpedance amplifier signal-conditioning IC amplifier IC interface IC semiconductor 3.2Gbps data rate 3.3V operation 5V operation 16-MLF package surface-mount package differential signaling controlled-impedance routing low-power design multi-gigabit optical communication telecommunications receiver
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ