Microchip Technology

SY88973VKI - 3.2Gbps CML Post Amplifier | Microchip

Артикул: SY88973VKI ✗ Снят с производства
3.3 V or 5 V Vdss 10-MSOP exposed pad Package
MOQ: 1 |

SY88973VKI Обзор

The Microchip SY88973VKI is a 3.3 V or 5 V CML limiting post amplifier rated for data rates up to 3.2 Gbps, with an integrated TTL loss-of-signal detector and a 10-MSOP exposed-pad surface-mount package. It is designed for high-speed optical-network signal-conditioning paths where received CML data must be limited, reshaped, and monitored.

A limiting post amplifier belongs to the broader class of high-speed transimpedance and current-mode logic amplifiers. These devices sit between a photodiode or optical receiver and the logic circuitry that recovers digital data. Their primary roles include amplifying small input signals, restoring valid logic levels, limiting output swing, and providing an indication when the received signal falls below a usable threshold. The SY88973VKI combines those functions in one compact package.

The device operates from either a 3.3 V or 5 V supply and supports data rates through 3.2 Gbps. Its CML interface is intended for point-to-point, high-speed signal chains, while the TTL loss-of-signal output allows an optical-network controller or system monitor to detect loss of optical input. The limiting function helps produce consistent output levels even when signal amplitude changes across operating conditions.

The exposed pad beneath the 10-MSOP package provides a thermal path from the IC to the PCB. Copper area around the pad should be kept as continuous as practical, with thermal vias transferring heat into internal board layers where necessary. Because the package is small and intended for high-speed applications, layout quality directly affects return loss, ringing, and timing margin.

Typical uses include SONET and SDH optical receivers, optical-network transceiver signal paths, high-speed optical communication modules, and other systems that receive CML data. In each case, the amplifier can condition a received signal while the TTL loss-of-signal indication supports system supervision, fault detection, and link-state management.

Designers should verify the complete receiver chain, including input impedance, termination, AC coupling, supply decoupling, and loss-of-signal timing, against the manufacturer datasheet. Differential or single-ended conventions and trace geometry must also match the source device. The 10-MSOP exposed-pad land pattern should be copied directly from the package drawing rather than inferred from a generic MSOP footprint.

This product page consolidates the identified device specifications, package information, lifecycle status, technical FAQs, and design considerations into an engineering-focused reference. It also distinguishes verified drop-in alternatives from related reel-code variants and avoids presenting a cross-package or merely functional substitute as a direct replacement.

Аналоги без доработки для SY88973VKI — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Для этого товара нет аналогов без доработки.

Запросить аналоги

SY88973VKI Максимальные параметры и электрические характеристики

Product Type CML limiting post amplifier with TTL loss-of-signal detector
Maximum Data Rate 3.2 Gbps
Напряжение питания 3.3 V or 5 V
Output Interface Current-mode logic (CML)
Loss-of-Signal Output TTL
Корпус 10-MSOP exposed pad
Package Width 3.00 mm
Package Length 0.118 in (3.00 mm)
Тип монтажа Surface mount
Application Optical networks
Manufacturer Micrel Semiconductor
Статус жизненного цикла Discontinued

Руководство по цоколевке SY88973VKI в корпусе 0.118 in (3.00 mm)

Цоколевка для SY88973VKI (корпус 0.118 in (3.00 mm)). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 0.118 in (3.00 mm) для SY88973VKI

Нет подробных данных о распиновке для SY88973VKI.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

SY88973VKI подходит для 6 применениеs: SONET Optical Receiver Signal Conditioning, SDH Optical Network Receiver, High-Speed Optical Transceiver Module, Optical Link Loss-of-Signal Supervision, Point-to-Point CML Data Link, Optical Communication Test Equipment.

🌐

SONET Optical Receiver Signal Conditioning

The SY88973VKI is suitable for conditioning CML data arriving from a high-speed optical receiver front end in SONET equipment. Its 3.2 Gbps capability matches the stated operating class of the limiting post amplifier, while the limiting function restores a consistent output swing before the signal reaches timing and decision circuitry. The TTL loss-of-signal output provides a separate system-health indication for supervision logic. The device should be placed close to the receiver output, with short controlled-impedance routing and local supply bypassing. Because it operates from either 3.3 V or 5 V, engineers can select the rail that matches the surrounding transceiver electronics, subject to the detailed pin and voltage requirements in the manufacturer datasheet.

🌐

SDH Optical Network Receiver

In an SDH optical receiver, the SY88973VKI can serve as the post-receiver limiting stage between the photodiode amplifier and the clock-and-data recovery circuitry. Supporting rates through 3.2 Gbps makes it appropriate for high-speed line-rate signal conditioning, while the CML output suits low-voltage high-speed logic interfaces. The TTL loss-of-signal function helps the system identify a weak or absent optical input. Layout should minimize the distance between the amplifier and the next stage, preserve a continuous reference plane, and use the exposed-pad copper and via pattern specified by the manufacturer package drawing. Receiver gain, common-mode limits, and loss-of-signal thresholds must be checked against the complete link design.

🌐

High-Speed Optical Transceiver Module

The SY88973VKI can be integrated into a high-speed optical transceiver module where received CML data requires limiting and amplitude restoration. Its stated 3.2 Gbps operation supports line-rate designs, and its dual 3.3 V or 5 V supply compatibility allows integration with either 3.3 V or 5 V transceiver logic when the detailed electrical limits permit. The TTL loss-of-signal output can feed module control or fault-monitoring circuitry. Compact optical modules require especially careful thermal and layout execution: connect the exposed pad to the recommended copper and thermal-via structure, bypass the supply pin locally, and keep high-speed traces short. Confirm the package footprint and all logic levels before layout release.

⚡

Optical Link Loss-of-Signal Supervision

The SY88973VKI is useful when an optical link requires both signal recovery and a TTL-compatible loss-of-signal indication. After the receiver front end produces a CML waveform, the limiting stage restores the signal, while the separate TTL output allows supervisory logic to recognize loss of valid optical input. This combination supports fault reporting and automatic line monitoring in dense optical equipment. The supervision threshold and timing must be checked against the system alarm requirements, while the high-speed signal path should use the shortest practical connection and the package's specified exposed-pad layout. The 3.3 V or 5 V operating choice should be coordinated with the TTL interface and the rest of the transceiver electronics.

🌐

Point-to-Point CML Data Link

The SY88973VKI can be used in point-to-point CML links that require limiting and level restoration at rates up to 3.2 Gbps. Its role is especially relevant when the transmitter can produce varying swing levels or when a long receiver section causes amplitude degradation. The CML output provides a standardized high-speed logic interface for the next device in the chain, and the TTL loss-of-signal indication supports continuity monitoring. Signal-integrity performance depends on correct source and load termination, controlled-impedance routing, and decoupling close to the device. The system designer should use the manufacturer electrical and application information to verify common-mode range, timing, and logic-level compatibility.

🖥️

Optical Communication Test Equipment

The SY88973VKI can support receiver-chain analysis in optical communication test equipment where a standardized CML signal must be regenerated or monitored. At rates through 3.2 Gbps, the limiting amplifier can provide repeatable logic levels for downstream measurement circuitry, and the TTL loss-of-signal output can simplify detection of an absent or undersized test stimulus. Laboratory and production-test implementations should preserve short high-speed connections, suitable reference-plane geometry, and stable supply decoupling. The exposed pad must be connected according to the package drawing to maintain thermal performance. Engineers should also verify that the loss-of-signal response time and threshold satisfy the instrumentation's expected acquisition and alarm timing.

Сводка рекомендуемых товаров

SY88973VKI Microchip Technology Используется в: SONET Optical Receiver Signal Conditioning, SDH Optical Network Receiver, High-Speed Optical Transceiver Module, Optical Link Loss-of-Signal Supervision, Point-to-Point CML Data Link, Optical Communication Test Equipment SY88973VKI-TR Reel-packaged order variant Используется в: SONET Optical Receiver Signal Conditioning, SDH Optical Network Receiver, High-Speed Optical Transceiver Module, Optical Link Loss-of-Signal Supervision, Point-to-Point CML Data Link, Optical Communication Test Equipment
What is the operating voltage of the SY88973VKI?
The SY88973VKI operates from either a 3.3 V or 5 V supply. According to the manufacturer datasheet, this dual-rail capability allows the amplifier to be used in systems whose optical receiver, logic, or transceiver electronics operate at either voltage. The datasheet should also be used to confirm the exact input, output, and supply-pin voltage limits before the device is connected to a board.
What is the maximum data rate of the SY88973VKI?
The SY88973VKI supports data rates up to 3.2 Gbps. The manufacturer identifies the device as a CML low-power limiting post amplifier for 3.3 V or 5 V operation. This rate places it in high-speed optical networking signal paths, where it can restore and limit a CML signal after the photodiode or receiver front end has generated the data waveform.
What does the SY88973VKI do in an optical receiver?
The SY88973VKI conditions a high-speed CML signal and provides a TTL loss-of-signal indication. According to the manufacturer datasheet, the limiting post-amplifier stage restores the received signal into a usable logic level, while the loss-of-signal output reports when the incoming signal is too small or otherwise unsuitable for reliable operation. It is intended for optical-network receiver signal chains.
Where can I download the SY88973VKI datasheet PDF?
The SY88973VKI datasheet PDF is available through the product's documentation link on this page. The identified document is an 11-page manufacturer datasheet describing the 3.3 V or 5 V, 3.2 Gbps CML limiting post amplifier with TTL loss-of-signal output. Use its package drawing, pin-description table, electrical characteristics, and application information when completing the board design.
Where can I find the SY88973VKI pinout?
The SY88973VKI pin assignments are shown in the manufacturer datasheet's pin-description and package drawings. The device uses a 10-MSOP package with an exposed pad, so the exposed thermal pad must also be identified when making PCB connections. Use the datasheet's physical drawing rather than a generic 10-pin MSOP symbol because exposed-pad geometry and thermal-via requirements affect footprint construction.
Is the SY88973VKI still active?
The SY88973VKI is discontinued. Distributor product information identifies the exact MPN as discontinued at DigiKey, while original documentation was published under the Micrel Semiconductor name and is now associated with Microchip Technology. For an obsolete design, engineers should review the manufacturer's cross-reference search and verify any proposed replacement for electrical and pin compatibility.
What is the package used by the SY88973VKI?
The SY88973VKI is offered in a 10-MSOP exposed-pad surface-mount package measuring 3.00 mm by 0.118 in. The exposed pad provides a heat-transfer path to the PCB, but it also requires the footprint and solder mask to match the manufacturer drawing. Use adequate thermal-via density and copper area where permitted by the board layout.
SY88973VKI vs SY88973VKI-TR — which part should I select?
SY88973VKI and SY88973VKI-TR identify the same core SY88973 amplifier function, while the suffix indicates different order packaging. The manufacturer description identifies the device as a 3.3 V or 5 V, 3.2 Gbps CML limiting post amplifier with TTL loss-of-signal output. For a new PCB, confirm the required reel or tape orientation, marking, and package drawing rather than substituting the suffix without checking the ordering information.
When should I choose the SY88973VKI over another limiting post amplifier?
Choose the SY88973VKI when the design requires a 3.2 Gbps CML limiting post amplifier with a TTL loss-of-signal output in a 10-MSOP exposed-pad package. The 3.3 V or 5 V supply compatibility is also important. Another amplifier should be selected only if its complete electrical characteristics, logic interface, pin assignments, and package drawing satisfy the receiver-chain requirements.
Is the SY88973VKI suitable for an optical-network transceiver?
Yes, the SY88973VKI is specifically described for optical-network applications and supports rates through 3.2 Gbps. Its CML interface fits a high-speed receiver signal chain, and its TTL loss-of-signal output can assist link supervision. Suitability depends on matching the receiver's voltage, impedance, timing, and loss-of-signal requirements to the manufacturer electrical characteristics.
What can replace the SY88973VKI?
No direct drop-in replacement has been established from the identified cross-reference information, so the safest replacement path begins with Microchip's cross-reference search. A candidate must use the same 10-MSOP exposed-pad footprint, match pin-for-pin, support the intended 3.3 V or 5 V rail, operate at the required data rate, and provide compatible CML and TTL loss-of-signal interfaces before PCB reuse is approved.
What is the best cross-brand equivalent for the SY88973VKI?
A cross-brand equivalent cannot be recommended without a verified pin and parameter comparison. The required candidate must preserve the 10-MSOP exposed-pad footprint, CML output, TTL loss-of-signal function, 3.3 V or 5 V operation, and performance at the design's data rate. Search the manufacturer's cross-reference database and compare the complete datasheet electrical tables rather than relying only on the 3.2 Gbps headline specification.
How should I design the PCB around the SY88973VKI?
Place the SY88973VKI close to the receiver output and keep the high-speed CML route short, continuous, and over a controlled reference plane. Follow the manufacturer package drawing for the exposed-pad clearance and thermal vias, and place the supply bypass capacitor close to the supply pin. The datasheet's recommended application circuit and layout guidance should govern impedance, termination, and decoupling details.
How much thermal design is required for the SY88973VKI?
The 10-MSOP exposed pad should be connected to an adequate PCB copper area and thermal-via array to transfer heat away from the IC. Although the device is described as a low-power limiting post amplifier, the final junction-temperature margin depends on supply voltage, output configuration, data activity, ambient temperature, and board construction. Use the manufacturer power data with those operating conditions.
What are the key specifications of the SY88973VKI that engineers should know?
The key specifications are a 3.2 Gbps maximum data rate, 3.3 V or 5 V operation, a CML limiting post-amplifier function, and a TTL loss-of-signal output. The package is a 10-MSOP exposed-pad surface-mount device intended for optical networks. Supply current, gain, timing, common-mode limits, and temperature range must be taken from the manufacturer electrical-characteristics tables for design calculations.

Справочные инженерные данные для SY88973VKI — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the SY88973VKI for an obsolete 3.2 Gbps optical receiver design that specifically uses a 10-MSOP exposed-pad CML limiting post amplifier with TTL loss-of-signal output and a 3.3 V or 5 V supply. Its feature combination is most useful when both signal restoration and link supervision are required in one device. Do not select a generic CML buffer when the limiting behavior, loss-of-signal threshold, or TTL supervision output is electrically significant. Because no direct drop-in replacement has been established, use Microchip's cross-reference search to identify a candidate, then compare the complete pinout, package drawing, supply limits, common-mode range, timing, and CML output characteristics. Treat SY88973VKI-TR as an order-packaging variant for comparison purposes, not as a separate functional upgrade.

Сравнение с аналогами

Параметр Этот товар
Brand Microchip Technology
Package 10-MSOP exposed pad
Product Type CML limiting post amplifier
Maximum Data Rate 3.2 Gbps
Supply Voltage 3.3 V or 5 V
Output Interface CML
Loss-of-Signal Output TTL
Application Optical networks
Lifecycle Status Discontinued
Mounting Type Surface mount

Ключевые отличия

  • Integrated CML limiting and TTL loss-of-signal functions (против Generic limiting post amplifier)
  • Dual operating supply options (против Single-supply optical receiver amplifier)
  • Compact exposed-pad thermal path (против Larger non-exposed-pad limiter package)

Заметки по проектированию

Use the manufacturer package drawing to construct the 10-MSOP exposed-pad footprint, including pad length, solder-mask opening, and paste geometry. The exposed pad should connect to a solid copper region with multiple thermal vias, while high-speed CML traces should remain short and continuous over a stable reference plane. Avoid splitting the thermal copper beneath the device with unrelated high-speed routing.

Place the supply bypass capacitor as close as practical to the supply pin and connect it through a short, low-inductance path to the device ground reference. Keep the high-speed input and output paths away from the capacitor's current loop and from other switching-node copper. Use the manufacturer's recommended decoupling values and supply arrangement rather than substituting general bulk capacitance for local high-frequency bypassing.

Confirm source impedance, termination method, common-mode range, and loss-of-signal timing against the complete receiver chain. The CML path should use controlled geometry and a continuous reference plane, with no unnecessary stubs or test-point structures near the amplifier. The TTL loss-of-signal trace is less speed-critical, but it should still avoid coupling from the CML output and switching nodes.

Do not treat the SY88973VKI and SY88973VKI-TR as interchangeable solely because they have similar electrical descriptions. Confirm ordering suffix, reel orientation, device marking, and manufacturer package information for production assembly. Also avoid using a generic MSOP footprint: the exposed pad requires dedicated thermal and solder-mask treatment.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

No product-specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for this discontinued part. The device is a general-purpose integrated circuit and is not an automotive-qualified product.

Данные проверены: 2026-11-20 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

SY88973VKI datasheet SY88973VKI datasheet pdf SY88973VKI pinout SY88973VKI specifications SY88973VKI equivalent SY88973VKI replacement SY88973VKI cross reference SY88973VKI 3.2Gbps CML amplifier SY88973VKI 10-MSOP package SY88973VKI optical network SY88973VKI vs SY88973VKI-TR Microchip SY88973VKI SY88973VKI price SY88973VKI stock

Связанные компоненты & термины

Microchip Technology Micrel Semiconductor SY88973VKI SY88973VKI-TR CML limiting post amplifier limiting post amplifier high-speed amplifier integrated circuit semiconductor current-mode logic CML TTL loss-of-signal output 3.2 Gbps 3.3 V 5 V 10-MSOP 10-MSOP exposed pad MSOP package family surface mount SMD optical networks SONET SDH optical transceiver signal integrity
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ