Microchip Technology

SY89295UMG - 1024-Tap Programmable Delay Line | Microchip

Артикул: SY89295UMG ✓ Активен
2.5 V ±5% Vdss 32-pin VFQFN with exposed pad Package 1.5 GHz Speed
MOQ: 1 |

SY89295UMG Обзор

The Microchip Technology SY89295UMG is a 1024-tap digitally programmable delay line with a 3.2 ns to 14.8 ns delay range and 10 ps control resolution. It operates from a 2.5 V ±5% or 3.3 V ±10% supply and is specified for use with LVPECL signals in a 32-pin VFQFN package with an exposed pad. The device supports signal rates up to 1.5 GHz.

A programmable delay line is a clock-and-timing semiconductor that delays a digital waveform under control of an external digital interface. It belongs to the timing IC hierarchy, where delay lines provide adjustable phase alignment, clock de-skewing, data recovery, and deterministic timing compensation. The SY89295UMG combines wide adjustment range with fine 10 ps increments, allowing calibration across multiple boards or subsystems without replacing the component.

Key features include 1024 programmable taps, a total delay range of 3.2 ns to 14.8 ns, and 10 ps delay resolution. The LVPECL interface supports high-speed data-center, telecommunications, and industrial timing systems, while the dual 2.5 V and 3.3 V supply options simplify interface design. The manufacturer specifies operation across the industrial temperature range from -40°C to +85°C.

The architecture uses a digital control input to select the required delay state while passing the input signal through an adjustable delay path. Because the delay is electronically selectable rather than fixed, engineers can implement power-up calibration, periodic alignment, or production compensation routines. The 1.5 GHz signal capability makes the part suitable for clock distribution, serial-link timing adjustment, and skew management where board-level propagation differences must be corrected.

Typical applications include high-speed optical-transport equipment, telecommunications line cards, parallel and serial data converters, network-timing equipment, and industrial instrumentation. It can also be used in clock-generation systems where a downstream interface requires a controlled phase offset relative to a reference clock.

PCB implementation requires careful high-speed routing and a low-impedance return path. Place decoupling capacitors close to the supply pins, connect the exposed thermal pad to a properly sized ground plane, and route the LVPECL clock or data path away from high-current switching nodes. Differential pair geometry and controlled impedance are important when the delay line participates in a high-speed clock network.

This product page combines the manufacturer specifications, package details, application guidance, and verified drop-in alternatives. It also provides practical PCB, timing, and signal-integrity considerations that help engineers evaluate the SY89295UMG before integrating it into a precision timing design.

Аналоги без доработки для SY89295UMG — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

SY89296UMG-TR

✅ Прямая замена
📦 32-pin VFQFN with exposed pad
Fine-tune-control implementation differs from SY89295UMG; documented as a parametric equivalent with the same 32-pin MLF package, while control mapping and delay characteristics require qualification

📋 Справочный аналог (нет в каталоге)

SY89295UMG Характеристики

Product Type Programmable delay line IC
Number of Taps 1024 taps
Programmable Delay Range 3.2 ns to 14.8 ns
Delay Resolution 10 ps
Maximum Signal Frequency 1.5 GHz
Supply Voltage Option 1 2.5 V ±5%
Supply Voltage Option 2 3.3 V ±10%
Logic Interface LVPECL
Диапазон рабочих температур -40°C to +85°C
Корпус 32-pin VFQFN with exposed pad
Тип монтажа Surface mount
Programmable Interface Digital control
Component Category Delay line / timing element
Число выводов 32 pins

Руководство по цоколевке SY89295UMG в корпусе 32-pin vfqfn with exposed pad

Цоколевка для SY89295UMG (корпус 32-pin vfqfn with exposed pad). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 32-pin vfqfn with exposed pad для SY89295UMG

Нет подробных данных о распиновке для SY89295UMG.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

SY89295UMG подходит для 6 применениеs: Telecommunications Clock De-Skewing, High-Speed Data Recovery, Optical Transport Equipment, Precision Clock Distribution, Industrial Instrumentation Timing, Clocked Test and Measurement Systems.

🌐

Telecommunications Clock De-Skewing

The SY89295UMG fits telecommunications equipment that must align a recovered clock with a parallel or serial data path. Its 1024 selectable taps cover 3.2 ns to 14.8 ns, and each 10 ps increment provides fine phase adjustment for compensating board skew and propagation differences. The 1.5 GHz signal capability supports high-speed backplane and line-card interfaces, while the LVPECL interface supports established high-speed clocking practice. Place the device near the clock/data breakout and maintain controlled-impedance routing so the calibrated delay is repeatable rather than being obscured by excessive trace loss.

🖥️

High-Speed Data Recovery

The SY89295UMG can provide adjustable phase positioning in high-speed data-recovery circuits where clock and data arrive with variable skew. Its digitally selectable 1024-tap delay path allows a controller to search for a stable sampling region and then retain that setting during operation. The 10 ps adjustment granularity supports fine timing calibration, and the 3.2 ns to 14.8 ns range covers more than 11 ns of correction. The LVPECL signal interface and operation to 1.5 GHz make the device relevant to high-speed serial links, converters, and timing recovery assemblies requiring continuous calibrated delay.

🌐

Optical Transport Equipment

Optical-transport equipment can use the SY89295UMG to align transmit and receive timing paths before conversion or serialization. The 3.2 ns to 14.8 ns delay range is useful for compensating skew introduced by connectors, optical modules, cables, and board routing, while 10 ps resolution supports fine production adjustment. Because the device accepts LVPECL and supports signals up to 1.5 GHz, it suits parallel high-speed data paths and clock-forwarding architectures. The exposed pad should be tied to an uninterrupted ground plane to limit inductance and maintain predictable high-frequency behavior.

⚡

Precision Clock Distribution

The SY89295UMG can introduce a controlled phase offset between a master clock and a derived clock in precision clock-distribution systems. Its 1024 digital taps permit systematic delay compensation across production boards, while the 10 ps increment supports fine alignment of sampling windows. The LVPECL interface and 1.5 GHz capability are appropriate for high-speed clock networks in telecommunications, instrumentation, and industrial control systems. The delay setting should be validated together with receiver hold and setup requirements, jitter, and the clock source to ensure the correction improves rather than masks an upstream timing problem.

🏭

Industrial Instrumentation Timing

The SY89295UMG is applicable to industrial instrumentation that synchronizes measurement, conversion, and communication clocks. Its industrial temperature range of -40°C to +85°C supports temperature-varying operating environments, while the digitally controlled delay allows calibration after assembly or whenever cable or interconnects change. The 3.2 ns to 14.8 ns range can compensate fixed board and fixture delays, and the 10 ps resolution supports repeatable fine tuning. Designers should keep the delay line close to the timing-critical interface and use a quiet ground reference because switching power converters and long high-speed traces can undermine the benefit of precise calibration.

🔧

Clocked Test and Measurement Systems

The SY89295UMG can support programmable timing relationships in test and measurement systems that compare clocks, trigger events, or sampled data. A controller can select among 1024 delay taps to compensate fixture and cable propagation differences, improving repeatability between test channels. The device's 3.2 ns to 14.8 ns range and 10 ps resolution are useful for fine trigger positioning, while LVPECL operation and support up to 1.5 GHz accommodate high-speed instrumentation. Keep the exposed pad well connected and use short return paths to prevent supply or ground noise from appearing as timing error during calibration.

What are the key specifications of SY89295UMG that engineers should know?
The SY89295UMG is a 1024-tap digital-programmable delay line covering 3.2 ns to 14.8 ns in 10 ps increments. It accepts LVPECL signals, operates from 2.5 V ±5% or 3.3 V ±10%, supports signals up to 1.5 GHz, and is specified from -40°C to +85°C. According to the Microchip manufacturer datasheet, the device combines fine delay adjustment with a 32-pin VFQFN package for compact high-speed timing designs.
How does the SY89295UMG programmable delay line work?
The SY89295UMG selects one of 1024 delay taps through a digital control interface and delays the incoming LVPECL waveform by the programmed amount. Its available range is 3.2 ns to 14.8 ns with 10 ps increments. The Microchip manufacturer datasheet identifies this as a digitally controlled delay line intended for precise phase adjustment, clock de-skewing, and calibration in high-speed systems.
What is the delay range and resolution of SY89295UMG?
The SY89295UMG provides a programmable delay range of 3.2 ns through 14.8 ns, with adjustments in 10 ps increments across 1024 taps. This gives engineers fine phase control for compensating propagation differences between clock and data paths. The delay-range and resolution values are specified in the Microchip manufacturer datasheet for the SY89295 family.
What supply voltage and logic interface does SY89295UMG use?
The SY89295UMG supports a 2.5 V ±5% supply or a 3.3 V ±10% supply and uses LVPECL signaling for the high-speed input path. The flexible supply options allow it to fit systems designed around 2.5 V or 3.3 V rail conventions. According to the Microchip manufacturer datasheet, these electrical limits apply to the programmable delay function.
Where can I download the SY89295UMG datasheet PDF?
The official SY89295UMG datasheet PDF is available from Microchip at the DeviceDoc link listed on this page. It describes the 1024-tap architecture, 3.2 ns to 14.8 ns delay range, 10 ps increments, LVPECL interface, supply requirements, pin information, and electrical characteristics. Use the manufacturer document for final pin assignments, absolute maximum ratings, and application-circuit details.
Where can I find the SY89295UMG pinout?
The SY89295UMG pinout is documented in the Microchip manufacturer datasheet and corresponds to a 32-pin VFQFN package with an exposed pad. Use the pin-description table and package drawing when assigning tracks, connecting supply decoupling, and grounding the exposed pad. The exposed pad is a thermal and electrical connection that should be tied to the board ground plane according to the datasheet layout guidance.
Is SY89295UMG suitable for high-speed clock alignment?
The SY89295UMG is suitable for high-speed clock alignment because it supports signals up to 1.5 GHz and offers 1024 digitally selectable delay taps. Its 3.2 ns to 14.8 ns range and 10 ps resolution are useful for correcting phase or skew between clock and data paths. The Microchip manufacturer datasheet confirms the frequency, delay range, and LVPECL interface used for this application.
What is the difference between SY89295UMG and SY89296UMG-TR?
The SY89296UMG-TR is identified by DigiKey as a parametric equivalent of the SY89295UMG and uses the same 32-pin MLF package naming used for the target. The available comparison material also distinguishes the SY89296 family by its fine-tune-control function, so control behavior and software configuration must be checked before substitution. Verify the complete pin table, delay map, control interface, and AC timing parameters in the relevant manufacturer datasheets.
When should I choose SY89295UMG over a fixed-delay line?
Choose the SY89295UMG when the required phase offset must be tuned after board assembly or adjusted during operation. Unlike a fixed-delay component, it provides 1024 digitally selected positions from 3.2 ns to 14.8 ns in 10 ps steps. This supports production calibration, clock de-skewing, and compensation for variable propagation delays in high-speed equipment.
What can replace the SY89295UMG in a pin-compatible design?
The SY89296UMG-TR is the closest documented drop-in candidate for the SY89295UMG because DigiKey lists it as a parametric equivalent and identifies the same 32-pin MLF form factor. It should be qualified by checking every control pin, delay-programming table, power rail, LVPECL output, and AC timing specification. The available manufacturer and distributor documentation should be reviewed before releasing the substitution to production.
Is SY89295UMG the same as SY89296UMG-TR for timing-calibration applications?
The SY89295UMG and SY89296UMG-TR are similar enough to be identified as a parametric-equivalent relationship, but they are not interchangeable solely because their packages match. The SY89296 family includes a fine-tune-control description, which may change how the delay command is generated and calibrated. Compare the control protocol, tap map, delay accuracy, jitter, and power behavior before treating either part as a functional replacement.
Where can I buy SY89295UMG online and check availability?
Use the Request a Quote form on this page to request current SY89295UMG availability, unit pricing, and lead time. The form is the appropriate channel for an order-on-request purchasing decision and avoids presenting a potentially stale inventory figure. MicrochipDirect also lists the exact MPN for quoting and direct-order review, while authorized-channel confirmation should precede a production purchase.
What is the price of SY89295UMG?
Current SY89295UMG pricing depends on quantity, lead time, and purchasing channel, so it should be confirmed through the Request a Quote form on this page. The form provides the latest commercial response for the exact manufacturer part number rather than a static price that may no longer reflect availability. Include the required quantity and target delivery date when submitting the request.
What is the lead time for SY89295UMG?
The current SY89295UMG lead time should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing availability, tube packaging, and shipment destination. For production planning, provide the annual usage, forecast schedule, and required date so the supplier can confirm a meaningful commitment.
Is SY89295UMG in stock?
The exact inventory position for SY89295UMG should be confirmed through the Request a Quote form on this page. A distributor listing or manufacturer inventory message can change rapidly and may not account for your allocated quantity. State the required quantity, packaging preference, and target date when requesting a stock confirmation and lead-time quotation.
Does the SY89295UMG comply with RoHS, REACH, or AEC-Q100?
The SY89295UMG must be assessed against the specific environmental and automotive requirements of the finished design using current Microchip documentation. Its industrial temperature rating of -40°C to +85°C is stated by the manufacturer, but temperature qualification does not itself establish AEC-Q100 qualification. Request the current material-compliance declarations and automotive quality documentation before making a compliance claim.

Справочные инженерные данные для SY89295UMG — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the SY89295UMG when a design needs a digitally adjustable 3.2 ns to 14.8 ns delay with 10 ps resolution and an LVPECL interface operating up to 1.5 GHz. It is particularly suitable for clock de-skewing, production calibration, trigger positioning, and compensated high-speed data paths. The SY89296UMG-TR is the closest documented package-compatible alternative, but its fine-tune-control implementation must be checked against the existing control logic and delay map. If the system only requires a fixed delay, a fixed-delay component may be simpler and more predictable. Before using either programmable device, verify the complete pin map, timing accuracy, jitter, power sequencing, temperature behavior, and high-speed layout requirements against the manufacturer datasheets.

Сравнение с аналогами

Параметр Этот товар SY89296UMG-TR
Brand Microchip Technology Microchip Technology
Package 32-pin VFQFN with exposed pad 32-pin MLF - same package family
Product Type Programmable delay line IC Programmable delay line with fine-tune control
Control Function Digital tap selection Fine-tune control

Ключевые отличия

  • Fine digital delay calibration (против SY89296UMG-TR)
  • High-speed LVPECL operation (против SY89296UMG-TR)
  • Compact exposed-pad implementation (против SY89296UMG-TR)

Заметки по проектированию

Place the SY89295UMG close to the clock or data interface it controls, and keep supply decoupling close to the relevant power and ground pins. The exposed pad should connect to a continuous ground plane with multiple nearby vias rather than through a narrow neck. This reduces inductance, improves return-current continuity, and limits supply noise from appearing as an apparent delay or jitter change during fine calibration.

Treat the LVPECL path as a controlled-impedance transmission line from the driver through the delay line to the receiver. Use differential routing with consistent geometry where the interface implementation requires it, avoid right-angle turns, and provide a continuous reference plane. The 10 ps tap resolution is valuable only when clock and data paths have repeatable propagation characteristics, so measure the assembled board rather than relying solely on schematic timing estimates.

Do not substitute SY89296UMG-TR without checking its fine-tune-control logic and programming table. A shared 32-pin package does not guarantee that every control bit, delay command, and operating condition behaves identically. Before using it as a drop-in replacement, compare the manufacturer datasheets for pin functions, delay mapping, supply sequencing, input-output timing, jitter, temperature behavior, and control-state defaults.

Separate the delay line's supply routing from noisy switching-converter paths and follow the decoupling values and placement shown in the manufacturer application guidance. Because the device can operate from either 2.5 V ±5% or 3.3 V ±10%, verify the exact rail against the associated LVPECL interface levels. Confirm that power sequencing does not create an uncontrolled signal state during startup or power-down.

Calibrate delay after the complete board is assembled and allow the system to reach its normal operating temperature. Cable changes, connector insertion, card replacement, or different external equipment can alter the timing relationship that the delay line is compensating. Store the selected tap code with board revision and calibration conditions, and include margin for component tolerance, temperature drift, and receiver setup and hold requirements.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer specifies an industrial temperature range of -40°C to +85°C, but current material-compliance and automotive-qualification declarations were not identified in the available product information.

Данные проверены: 2026-11-16 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

SY89295UMG datasheet SY89295UMG pinout SY89295UMG datasheet pdf SY89295UMG equivalent SY89295UMG replacement SY89295UMG vs SY89296UMG-TR SY89295UMG 1024 tap delay line SY89295UMG 3.2ns 14.8ns SY89295UMG LVPECL SY89295UMG 32 VFQFN SY89295UMG clock de-skewing SY89295UMG price SY89295UMG stock Microchip SY89295UMG

Связанные компоненты & термины

Microchip Technology SY89295UMG SY89296UMG-TR programmable delay line delay line IC clock-and-timing IC timing element digital delay control 1024 taps 3.2 ns to 14.8 ns delay range 10 ps delay resolution 1.5 GHz LVPECL 2.5 V power supply 3.3 V power supply 32-pin VFQFN QFN family surface-mount package exposed pad clock de-skewing high-speed data recovery optical transport equipment industrial instrumentation RoHS REACH AEC-Q100
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ