SY89874UMI - 1:2 2.5 GHz Clock Buffer | Microchip Technology
Артикул: SY89874UMI ✓ АктивенSY89874UMI Обзор
A clock fanout buffer is a clock-and-timing integrated circuit that distributes one incoming clock signal to multiple outputs while preserving signal amplitude, timing, and edge quality. The SY89874UMI belongs to the broader hierarchy of clock buffer, fanout buffer, clock divider, clock-and-timing IC, and semiconductor. Its 1:2 distribution ratio makes it useful where one source must feed two independent clock domains or output branches.
The device supports a 2.5 GHz maximum frequency, giving it useful performance for high-speed communications, processor, networking, and test equipment clock trees. The input stage accepts CML, HSTL, LVDS, and LVPECL signaling, while its outputs use LVPECL. Internal termination reduces the need for separate input termination networks when the board layout and signal environment are appropriate.
As a programmable clock divider/fanout buffer, the SY89874UMI can combine distribution with programmable divide functionality. This integration can reduce the number of separate clock components and simplify board partitioning. The 16-VFQFN package with exposed pad also supports compact layouts, although correct thermal management and high-speed layout practices remain essential.
Typical applications include 1-to-2 fanout for communications transceivers, programmable clock distribution in network equipment, clock division for test and measurement systems, processor clock routing, high-speed backplane distribution, and generation of synchronized LVPECL clocks for high-speed mixed-signal systems.
Design the input and output paths as controlled-impedance transmission lines, keep clock traces short, and provide continuous reference planes beneath the device. Use the exposed pad as a thermal and high-frequency return path, follow the manufacturer's recommended decoupling arrangement, and verify termination behavior for each supported input standard.
This product page combines the exact device characteristics with practical clock-tree guidance, application-oriented design notes, and a parameter comparison against same-package alternatives. It is intended to help engineers evaluate signal compatibility, frequency headroom, package reuse, and implementation constraints before committing to a PCB design.
Аналоги без доработки для SY89874UMI — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с SY89874UMI (тот же форм-фактор и посадочное место) — отличается по Fanout Ratio, Package, Internal Termination, Maximum Frequency, Output Count.
SY89872UMG
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →SY89831UMG
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →SY89832UMG-TR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
SY89874UMI Характеристики
| Product Type | Clock fanout buffer and divider IC |
| Fanout Ratio | 1:2 |
| Maximum Frequency | 2.5 GHz |
| Supported Input Levels | CML, HSTL, LVDS, and LVPECL |
| Output Logic Level | LVPECL |
| Programmable Clock Divider | Yes |
| Internal Termination | Yes |
| Корпус | 16-VFQFN with exposed pad |
| Package Designation | 16-MLF |
| Package Pin Count | 16 pins |
| Exposed Pad | Yes |
| Manufacturer Marking Code | 874U |
| Output Count | 2 outputs |
Руководство по цоколевке SY89874UMI в корпусе 16 pins
Цоколевка для SY89874UMI (корпус 16 pins). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для SY89874UMI.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
SY89874UMI подходит для 6 применениеs: High-Speed Communications Clock Fanout, Processor and FPGA Clock Distribution, Network Equipment Clock Tree, Test and Measurement Clock Distribution, High-Speed Backplane Distribution, Synchronized Mixed-Signal Systems.
High-Speed Communications Clock Fanout
The SY89874UMI fits a 1:2 clock-distribution role in high-speed communications equipment because it supports clocks up to 2.5 GHz while accepting CML, HSTL, LVDS, or LVPECL sources and producing LVPECL outputs. Place the device near the source or central clock branch so both destination devices receive low-loss, matched-edge signals. Its internal termination can reduce external components, while the programmable divider can create a related lower-rate clock when the downstream circuit requires it. Validate loss, jitter, impedance continuity, and receiver thresholds in the finished board because a 2.5 GHz rating alone does not guarantee acceptable margin in every channel.
Рекомендуется
Processor and FPGA Clock Distribution
The SY89874UMI can distribute a 2.5 GHz-class source to two processor or FPGA clock inputs while adding programmable divide capability for auxiliary clocks. Its 1:2 ratio reduces the need for a separate output buffer when two closely related clock destinations require independent branches. LVPECL outputs provide a common high-speed interface for compatible clock receivers, while the 16-VFQFN exposed-pad package keeps the footprint compact. Place the device after the source clock generator and before the branch points, maintain short matched routes, and account for receiver thresholds, clock-tree jitter, and startup sequencing.
Рекомендуется
Network Equipment Clock Tree
The SY89874UMI is suitable for network equipment that must split a common reference into two synchronized branches. Its 2.5 GHz maximum frequency provides substantial clocking bandwidth, while the 1:2 distribution ratio suits line cards, backplane transceivers, or parallel processing sections. CML, HSTL, LVDS, and LVPECL input support improves source compatibility across a mixed clock tree, and the integrated divider can serve a related lower-frequency domain. Keep the two output routes impedance controlled and equal where skew matters, provide uninterrupted ground references, and verify edge quality with the longest trace and worst-case loading condition.
Рекомендуется
Test and Measurement Clock Distribution
In test and measurement systems, the SY89874UMI can fan one reference clock out to two acquisition or conversion paths and offer programmable division for related test clocks. Its LVPECL outputs suit equipment designed around high-speed ECL-family clocking, and the 2.5 GHz ceiling covers demanding synthesizer, pattern-generator, and digitizer timing requirements. Minimize trace length and keep the outputs away from switching nodes to reduce deterministic and random jitter pickup. The exposed pad should be connected as directed by the manufacturer, with careful via distribution and local decoupling helping maintain stable supply behavior during rapid test sequences.
Рекомендуется
High-Speed Backplane Distribution
The SY89874UMI can provide a compact 1:2 split for high-speed backplane clock routing, particularly where LVPECL is the established signaling convention. Its 2.5 GHz capability supports demanding communication links, and internal input termination may simplify the source interface. Two LVPECL outputs allow adjacent destinations to be driven from one device while the programmable divider supports lower-rate auxiliary timing. Backplane implementation must account for loss, reflections, pair spacing, connector transitions, and receiver thresholds. Preserve a continuous reference plane and avoid long unmatched stubs because those effects can consume margin even when the nominal clock frequency is well below 2.5 GHz.
Рекомендуется
Synchronized Mixed-Signal Systems
The SY89874UMI suits synchronized mixed-signal systems that need one high-speed clock divided or distributed to two precision signal-processing blocks. Accepting CML, HSTL, LVDS, and LVPECL inputs lets the device sit near a heterogeneous clock source, while its LVPECL outputs feed compatible converters, transceivers, or timing controllers. The 16-VFQFN exposed-pad package supports dense layouts but requires deliberate grounding and thermal planning. Place the buffer close to the clock-consuming devices, isolate output paths from analog inputs, and verify clock-to-data timing across every divide setting used by the system.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для SY89874UMI — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | SY89872UMG | SY89831UMG | SY89832UMG-TR |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 16-VFQFN with exposed pad | 16-VFQFN with exposed pad | 16-VFQFN with exposed pad | 16-VFQFN with exposed pad |
| Exposed Pad | Yes | Yes | Yes | Yes |
Ключевые отличия
- Combines 1:2 fanout with programmable division (против SY89872UMG)
- Supports four high-speed input standards (против SY89831UMG)
- Integrated termination with exposed-pad package (против SY89832UMG-TR)
Заметки по проектированию
Treat every clock connection as a controlled-impedance transmission line. Place the SY89874UMI close to the clock branch point, keep output traces short, avoid test pads and unmatched stubs, and maintain a continuous reference plane beneath each route. The internal termination simplifies input interfacing, but its correct use still depends on the source impedance and logic standard. Confirm the manufacturer's recommended schematic and reference layout before releasing the PCB because incorrect reference-plane transitions can create reflections even at frequencies below the 2.5 GHz maximum.
Do not assume that a shared 16-VFQFN outline guarantees electrical drop-in compatibility. Compare pin numbers for power, ground, input termination, clock outputs, reference voltage, and divide-control functions before reusing a layout. Also confirm the allowed supply range, control levels, divide ratios, output amplitude, and input thresholds. The SY89872UMG, SY89831UMG, and SY89832UMG-TR are engineering alternatives to evaluate, but each requires a schematic-level and pin-level review rather than a footprint-only substitution.
Connect the exposed pad using the manufacturer's recommended ground-via pattern and provide adequate top-layer and bottom-layer copper. Although the SY89874UMI is primarily a low-power clock-and-timing device, local supply impedance, adjacent converter heat, and exposed-pad construction can still affect junction temperature and high-frequency return continuity. Keep thermal vias away from sensitive clock routing where practical, and calculate the estimated temperature rise from actual package dissipation and the board's thermal resistance before operation at elevated ambient temperature.
Информация о соответствии
Compliance status requires confirmation from the manufacturer documentation for the exact orderable device. RoHS and REACH are referenced as comparison fields, but no definitive compliance declaration is stated.