TAS2559YZT - 5.7W Digital Smart Amplifier | Texas Instruments
Артикул: TAS2559YZT ✓ АктивенTAS2559YZT Обзор
A smart audio amplifier is a power-management IC and signal-processing IC combined into one system-on-chip for audio playback. Unlike a conventional analog-input Class-D amplifier, the TAS2559 accepts digital audio signals, applies programmable processing, and drives a speaker through a switching output stage. Its hierarchy is digital smart amplifier → Class-D audio amplifier → audio amplifier IC → integrated circuit and power-management semiconductor.
The headline features include 5.7 W output power, integrated speaker protection, stereo processing, and Class-H boost operation with an identified 8.5 V boost rail. The digital input architecture reduces the need for a separate DAC when the source already delivers digital audio. The mono Class-D output topology is intended for efficient conversion of digital audio into a high-current speaker drive, while the integrated protection and processing functions simplify portable audio-product design.
TAS2559YZT integrates amplification, digital audio processing, boost capability, and speaker protection into a single 42-DSBGA device. The 42-ball package supports compact placement in consumer, portable, and embedded audio products. Available distributor information identifies the part as a one-channel mono Class-D amplifier in a 42-DSBGA tape-and-reel package. Detailed pin assignments, ball-map functions, clock requirements, and recommended external-component values require confirmation from the manufacturer datasheet.
Typical uses include Bluetooth speaker enclosures, portable speakers, smart-home audio nodes, compact soundbars, voice-assistant speakers, and other systems that combine a digital audio source with a single speaker. In such systems, digital input can shorten the signal path, integrated protection can protect the speaker and output stage, and the compact package can conserve board area. The device may also serve as a secondary Class-D amplifier in a multi-speaker architecture.
Designers should verify the required I2S or other digital-audio interface, supply sequencing, boost-component selection, speaker impedance, thermal performance, and PCB land pattern against the TI datasheet. Decoupling must be placed close to the supply and ground balls, and the high-current Class-D output routing requires careful return-path and thermal design. Actual acoustic output also depends on the speaker impedance, filter selection, supply voltage, PCB thermal performance, and boost configuration.
This page consolidates verified manufacturer and distributor information with package-aware comparison data, practical design notes, sourcing guidance, and explicitly qualified replacement analysis. It also distinguishes confirmed 42-DSBGA orderable variants from generic cross-reference tools that do not identify pin-compatible components.
Аналоги без доработки для TAS2559YZT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
TAS2559YZ
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
TAS2559Y
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
TAS2559YZT Максимальные параметры и электрические характеристики
| Device Type | Digital-input smart audio amplifier |
| Amplifier Class | Class-D with Class-H boost |
| Output Power | 5.7 W |
| Выходная конфигурация | 1 channel, mono |
| Boost Voltage | 8.5 V |
| Supply Voltage Options | 1.8 V and 3.3 V |
| Speaker Protection | Integrated |
| Audio Processing | Integrated stereo processing |
| Корпус | 42-DSBGA |
| Package Type | Rectangular surface-mount BGA |
| Pin and Ball Count | 42 |
| Тип монтажа | Surface mount |
| Диапазон рабочих температур | -40°C to 85°C |
| Operating Mode | Mono Class-D output |
| Input Architecture | Digital audio input |
| Manufacturer Configuration | Full system-on-chip smart amplifier |
Руководство по цоколевке TAS2559YZT в корпусе rectangular surface-mount bga
Цоколевка для TAS2559YZT (корпус rectangular surface-mount bga). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для TAS2559YZT.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
TAS2559YZT подходит для 6 применениеs: Bluetooth Speaker Enclosure, Portable Speaker, Smart Home Audio Node, Voice Assistant Speaker, Compact Soundbar Speaker, Industrial Audio Control Unit.
Bluetooth Speaker Enclosure
The TAS2559YZT fits a compact Bluetooth speaker when the host audio processor supplies a compatible digital stream. Its 5.7 W mono Class-D output directly addresses a single speaker, while integrated speaker protection and stereo processing reduce the external signal-processing burden. The 42-DSBGA package can save board area, although thermal performance and output routing remain critical because switching currents circulate through the PCB. Designers should budget for the boost stage, local decoupling, and a ground and return layout consistent with the TI reference design. Verify the required digital format, clocking, I2C control behavior, speaker impedance, and protection thresholds in the manufacturer datasheet before releasing the layout.
Рекомендуется
Portable Speaker
The TAS2559YZT is suitable for a portable speaker that prioritizes efficient digital audio playback in a restricted board area. Its 5.7 W output rating provides a defined power target for speaker selection, while the digital input path can simplify the connection from a modern application processor. Integrated speaker protection supports a compact implementation by reducing the need for a separate protection circuit. Designers must account for boost efficiency, battery-supply headroom, acoustic limits, and heat generated around the 42-DSBGA. The verified data supports operation from -40°C to 85°C, making the device broadly suitable for industrial-grade portable equipment, but production dimensions and sound-pressure output depend on the chosen speaker and enclosure.
Рекомендуется
Smart Home Audio Node
The TAS2559YZT can serve as the speaker-driver stage in a smart-home audio node with a digital host processor. Digital input avoids a separate external DAC when the source is already digital, while integrated stereo processing and speaker protection consolidate functions that would otherwise occupy additional board area. Its 5.7 W mono Class-D output is appropriate for one compact driver rather than a high-power multi-speaker system. The implementation should preserve signal integrity at the digital interface, maintain stable 1.8 V or 3.3 V rails, and provide the boost network recommended by TI. Product developers should also confirm whether the available processing and protection functions satisfy the required acoustic safety limits.
Рекомендуется
Voice Assistant Speaker
The TAS2559YZT is appropriate for a voice-assistant speaker when the host processor provides digital playback audio and the enclosure uses one primary driver. The 5.7 W Class-D output supports efficient transducer drive, while integrated speaker protection can improve resilience against overdrive or thermal excursions. Stereo processing permits system-level control of the digital signal, although exact processing configurability must be confirmed in the datasheet. Layout engineers should keep digital timing paths away from high-current Class-D and boost paths and follow the manufacturer's recommended layer stack. Acoustic tuning remains dependent on speaker selection, mechanical design, and enclosure tuning, so the IC should be selected based on electrical and thermal requirements rather than output alone.
Рекомендуется
Compact Soundbar Speaker
The TAS2559YZT can be evaluated for a compact soundbar section that uses one driver per smart-amplifier channel. Its 5.7 W mono output and digital input suit distributed speaker drive, while the small 42-DSBGA package supports placement close to the transducer. Integrated protection and processing reduce board-level component requirements compared with a discrete output design. For a multi-driver soundbar, each amplifier and its digital audio channel must be planned for synchronization and channel mapping. The boost network and Class-D output routing need careful partitioning to prevent audio interference and excessive thermal loading. Verify the device's supported digital interface, control firmware expectations, and synchronization behavior against the TI datasheet before finalizing the architecture.
Рекомендуется
Industrial Audio Control Unit
The TAS2559YZT can support a compact industrial audio control unit that requires protected digital speaker drive. Its specified -40°C to 85°C operating range is relevant to equipment exposed to industrial ambient conditions, although the system designer must also assess enclosure temperature and the IC's thermal margin. The 5.7 W output is useful for status tones, announcements, and compact feedback speakers driven by digital audio. Integrated protection may reduce system complexity, but diagnostic behavior and protection thresholds must be evaluated carefully. PCB planning should include stable supply routing, adequate copper for heat spreading, and isolation of digital control interfaces from switching nodes. Compliance and environmental claims beyond the verified temperature range require review of the current TI documentation.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для TAS2559YZT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | TAS2559YZ | TAS2559Y |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 42-DSBGA | 42-DSBGA | 42-DSBGA |
| Product Type | Digital-input smart amplifier | Related TAS2559 family designation | Related TAS2559 family designation |
Ключевые отличия
- Combines digital audio processing and protected Class-D output (против TAS2559Y)
- Uses an efficient Class-H boost architecture (против TAS2559YZ)
- Specified for industrial ambient temperatures (против TAS2559YZ)
- Fully identified ordering designation (против TAS2559YZ)
Заметки по проектированию
Place all required supply-decoupling capacitors directly between the relevant 42-DSBGA supply and ground balls, with the shortest possible loop. Keep the digital-audio traces short and away from the Class-D outputs and boost-current path. Do not route feedback or control signals through areas containing switching-node copper, because the verified data identifies a digital smart amplifier with Class-H boost and does not provide a complete PCB guideline for this assembly.
Design the boost and power rails around the reported 5.7 W output and 8.5 V boost level while confirming the exact load, speaker impedance, efficiency curve, and component values in the TI datasheet. The available search data confirms 1.8 V and 3.3 V supply options, but it does not specify startup current, thermal resistance, or inductor limits. Those values must be obtained before rating the battery, supply regulator, copper area, and boost components.
Treat the 42-DSBGA as a compact but potentially high-density thermal solution. Provide uninterrupted ground-plane area, minimize thermal vias through unintended splits, and use the manufacturer's recommended exposed-pad and copper arrangement. Thermal behavior depends on the 42-ball package's exposed thermal connection and the PCB design; because junction-to-ambient resistance is unavailable in the verified data, an estimated temperature rise should not be presented as a datasheet specification.
Do not substitute a family designation solely because its name resembles TAS2559YZT. Confirm the complete orderable MPN, 42-ball land pattern, power rating, digital-audio interface, speaker-sense or protection configuration, boost topology, and control firmware compatibility. Generic cross-reference pages in the verified results did not expose a confirmed competing pin-compatible part, making the manufacturer ordering table and current datasheet the authoritative sources for a replacement decision.
Информация о соответствии
The verified search results do not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is marked not applicable because the available records identify an industrial-temperature smart amplifier but do not identify an automotive-qualified variant.
