Texas Instruments

TAS5342DDV - 100W Stereo Class D Power Stage | Texas Instruments

Артикул: TAS5342DDV ✓ Активен
0 V to 34 V Vdss 8 ohm Rds(on) 44-HTSSOP Package
MOQ: 1 |

TAS5342DDV Обзор

Texas Instruments TAS5342DDV is a 100-W stereo digital amplifier power stage designed for Class D audio systems, supplied in a 44-HTSSOP package. The device is intended for stereo or bridge-tied-load (BTL) configurations and supports speaker loads up to 8 ohm. Its integrated digital power-stage design is intended to provide high output power with low harmonic distortion, low integrated noise, and low idle current for audio receivers, powered speakers, soundbars, and other compact audio systems.

A digital Class D power stage is a semiconductor amplifier category that converts a digital audio signal into a high-current switching waveform and then reconstructs the audio output through the speaker and output filtering network. Within the power-management hierarchy, the TAS5342DDV combines an audio amplifier, power conversion function, output-driver capability, and integrated fault protection in one power-management IC. It is commonly paired with an audio DSP or digital-audio interface that generates the required PWM signals.

The TI product page identifies the TAS5342 as a high-performance integrated stereo digital amplifier power stage capable of driving a bridge-tied load at up to 100 W per channel. The listed operating power-supply range is 0 V to 34 V, with a typical supply range of 10.8 V to 13.2 V. The device supports differential input and differential output arrangements, which help reject common-mode noise and allow flexible speaker-routing configurations.

The integrated protection system is a major functional feature. Texas Instruments describes protection against multiple fault conditions, including output-related faults that could otherwise damage the power stage or connected speaker network. The 44-HTSSOP package provides a high pin count for power connections, signal routing, control functions, and thermal management. Because power amplifiers dissipate energy in their output stages, correct copper area, thermal-pad layout, heat spreading, and enclosure ventilation are essential in practical designs.

Typical applications include powered stereo speakers, home-theater receivers, compact soundbars, multimedia speakers, and other consumer audio equipment. The 100-W-per-channel capability is useful when the loudspeaker load is nominally 8 ohm and the amplifier is operated within the manufacturer-recommended supply and thermal limits. The differential output structure also makes the device suitable for BTL speaker connections, where each channel drives the speaker differentially.

For implementation, follow the pin-description table and recommended application circuit in the manufacturer datasheet when assigning the 44-HTSSOP land pattern. Keep the power-stage supply and output-current paths compact, provide adequate input and output filtering, and confirm that the exposed thermal pad is connected to the intended ground and copper area. The amplifier should not be selected solely by its headline wattage; speaker impedance, supply voltage, thermal dissipation, modulation scheme, and output-filter requirements determine the practical result.

This page summarizes the key electrical, packaging, protection, and application characteristics of the TAS5342DDV and organizes them for faster design review. It also identifies the limits of directly replacing a power-stage IC: a valid drop-in candidate must match the package, pinout, supply assumptions, output architecture, and thermal requirements rather than merely share a similar wattage rating.

Аналоги без доработки для TAS5342DDV — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

TAS5142DDVR

✅ Прямая замена
📦 44-HTSSOP
Related TI Class D power-stage part with lower published power capability than the TAS5342DDV; exact pin and electrical compatibility requires confirmation against both datasheets.

📋 Справочный аналог (нет в каталоге)

TAS5342DDV Максимальные параметры и электрические характеристики

Product Type Stereo digital amplifier power stage
Amplifier Class Class D
Maximum Output Power 100 W per channel
Channel Configuration 1-channel mono or 2-channel stereo
Speaker Output Configuration Bridge-tied load (BTL)
Корпус 44-HTSSOP
Supply Voltage Range 0 V to 34 V
Typical Dual Supply Voltage 10.8 V to 13.2 V
Maximum Load Resistance 8 ohm
Input Signal Differential input
Output Signal Differential output
Maximum Power Dissipation 2000 mW typical
Protection Features Integrated protection system for multiple fault conditions
Диапазон рабочих температур 0 C to 70 C

Руководство по цоколевке TAS5342DDV в корпусе 44-htssop

Цоколевка для TAS5342DDV (корпус 44-htssop). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 44-htssop для TAS5342DDV

Нет подробных данных о распиновке для TAS5342DDV.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

TAS5342DDV подходит для 6 применениеs: Powered Stereo Speaker, Home-Theater Receiver, Compact Soundbar, Multimedia Speaker System, Active Bookshelf Speakers, Automotive-Grade Audio System.

🔊

Powered Stereo Speaker

The TAS5342DDV suits powered stereo speakers because it can deliver up to 100 W per channel in a BTL configuration and supports differential outputs. The 44-HTSSOP power-stage layout gives the designer access to the signal, supply, ground, and thermal connections required for a high-current audio output stage. A DSP commonly generates the modulation signal, while external output filtering reconstructs the speaker waveform. Confirm the actual output power at the intended supply voltage and 4-ohm or 8-ohm load rather than relying on the headline rating alone.

🏠

Home-Theater Receiver

A home-theater receiver can use the TAS5342DDV as a high-power stereo output stage when it requires 100-W-class amplification with differential BTL drive. The part is suitable for front-left, front-right, or other high-power speaker channels where the supply rail and enclosure can dissipate the expected losses. Its integrated fault protection adds resilience during normal operation, but the amplifier still needs correct speaker-impedance checks, output filters, sequencing, and thermal verification. The 44-HTSSOP package must be placed on a multilayer board with a substantial thermal-pad copper area.

📺

Compact Soundbar

The TAS5342DDV is a practical power-stage candidate for compact soundbar speaker arrays requiring several amplified channels. Each channel can use the BTL output arrangement to drive a speaker efficiently while differential signaling helps maintain signal integrity through the power stage. The 100-W-per-channel capability provides headroom for louder playback, although the actual acoustic output depends on amplifier efficiency, supply voltage, speaker sensitivity, and enclosure volume. Keep the high-current outputs compact and route them away from sensitive audio and control signals.

🖥️

Multimedia Speaker System

The TAS5342DDV can serve as the power stage in an active multimedia speaker system driven by a digital audio processor. Its differential inputs and outputs support robust signal connections, while the integrated protection system helps manage common speaker and output-stage faults. For a consumer USB, wireless, or network audio source, the upstream codec or DSP must provide a compatible digital audio interface and the required PWM modulation. Validate grounding, filtering, and shutdown behavior so that pop noise and amplifier transients do not disturb the listening experience.

🎵

Active Bookshelf Speakers

Active bookshelf speakers benefit from the TAS5342DDV when the enclosure supports 100-W-class amplification and the system uses a compact digital signal chain. The BTL topology drives the speaker without requiring a single-ended output stage, and the differential signal path can reduce susceptibility to common-mode noise. The design should include output inductors or other filtering required by the selected modulation method, input protection, and a heat-spreading copper region. Before production, verify low-level idle behavior and thermal performance with the intended enclosure and speaker network.

🚗

Automotive-Grade Audio System

The TAS5342DDV can be considered for a powered audio subsystem when its 0 C to 70 C operating range and electrical limits fit the vehicle environment. High-power automotive audio systems often require robust power delivery, fault handling, and controlled startup, so the system designer should review thermal margins, transient behavior, and protection thresholds in the datasheet. The 44-HTSSOP package supports a high-current layout, but automotive qualification requirements are not established by the available product information. Confirm all environmental and quality requirements before using this part in a safety-relevant or production automotive design.

Сводка рекомендуемых товаров

TAS5342 Parent stereo Class D power-stage family Используется в: Powered Stereo Speaker, Home-Theater Receiver, Compact Soundbar, Multimedia Speaker System, Active Bookshelf Speakers, Automotive-Grade Audio System TAS5086 Digital audio PWM processor used in the manufacturer audio chipset Используется в: Powered Stereo Speaker, Home-Theater Receiver, Compact Soundbar, Multimedia Speaker System, Active Bookshelf Speakers, Automotive-Grade Audio System
What is the TAS5342DDV used for?
The TAS5342DDV is a Texas Instruments stereo digital amplifier power stage used in Class D audio equipment. It is designed to drive a bridge-tied-load speaker network at up to 100 W per channel and is suitable for powered speakers, receivers, soundbars, and multimedia systems. The manufacturer product page identifies the device as an integrated stereo digital amplifier power stage with low harmonic distortion, low integrated noise, and low idle current.
How many watts can the TAS5342DDV output?
The TAS5342DDV is rated for up to 100 W per channel when configured for bridge-tied-load operation. The exact usable output depends on supply voltage, speaker impedance, thermal conditions, and the modulation implementation. Texas Instruments describes the device as a high-performance integrated stereo digital amplifier power stage for driving a 4-ohm BTL load at up to 100 W per channel.
What package does the TAS5342DDV use?
The TAS5342DDV uses a 44-HTSSOP package. The package is a surface-mount power-amplifier package with an exposed thermal pad used to transfer heat from the device into the PCB copper area. When laying out the PCB, use the package drawing and pin-description table in the manufacturer datasheet rather than relying on the abbreviated distributor package name.
Where can I download the TAS5342DDV datasheet?
The official TAS5342 datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/tas5342.pdf. The document contains the recommended application circuit, electrical characteristics, pin descriptions, thermal information, and guidance for using the TAS5342 as a power stage in a digital audio system. The datasheet also describes test conditions for audio performance measurements.
Where can I find the TAS5342DDV pinout?
The TAS5342DDV pinout is defined by the pin-description table in the Texas Instruments TAS5342 datasheet. Use that table together with the 44-HTSSOP package drawing and the recommended layout because the power-stage pins, control signals, ground connections, and thermal pad must be assigned correctly. The abbreviated distributor listing alone is not a substitute for the manufacturer pin table.
What supply voltage does the TAS5342DDV use?
The TAS5342DDV is associated with a listed supply range of 0 V to 34 V and a typical dual supply voltage of 10.8 V to 13.2 V. In an actual audio design, confirm the permitted operating mode, supply sequencing, bypass capacitance, and power-rail limits in the manufacturer datasheet before selecting the system supply.
Can the TAS5342DDV drive an 8-ohm speaker?
Yes, the TAS5342DDV is listed with a maximum load resistance of 8 ohm and supports bridge-tied-load speaker drive configurations. The 100-W-per-channel headline value depends on the supply and thermal conditions, so an 8-ohm load does not guarantee 100 W in every implementation. Check the datasheet test conditions and calculate the expected output dissipation for the actual rail voltage.
What is the difference between the TAS5342DDV and TAS5142DDVR?
The TAS5342DDV is a 100-W stereo digital amplifier power stage, while the TAS5142DDVR is a different TI Class D audio power-stage part. The comparison result confirms that the two devices are related alternatives, but it does not by itself establish identical pinout, thermal, or electrical compatibility. Use the manufacturer datasheets for each device before treating either part as a replacement.
What can replace the TAS5342DDV?
A true drop-in replacement must use the same 44-HTSSOP footprint, match the pin assignments, preserve the differential input and output architecture, meet the supply-voltage requirements, and provide compatible thermal performance. The verified cross-reference results identify TAS5142DDVR as a related TI comparison part, but they do not document a verified pin-to-pin equivalence. Confirm the pin tables and application circuits before approving it as a substitute.
Is the TAS5342DDV suitable for a powered speaker?
The TAS5342DDV is suitable for a powered stereo speaker when the speaker impedance, amplifier supply, output filtering, and thermal design match its ratings. Its 100-W-per-channel stereo capability is especially appropriate for compact powered speakers and soundbars. The design must still include the required external output filtering, power-supply decoupling, and PCB thermal-pad implementation.
Does the TAS5342DDV include speaker protection?
The Texas Instruments product page states that the TAS5342 includes a complete integrated protection system for multiple fault conditions. The exact protection thresholds and response behavior should be confirmed in the manufacturer datasheet. Protection functions help prevent device and speaker damage, but they do not replace correct impedance matching, gain setting, filtering, or thermal design.
What is the operating temperature range of the TAS5342DDV?
The distributor and product-page information for TAS5342DDV lists an operating temperature range of 0 C to 70 C. For production equipment, verify the exact ordering code and temperature grade in the Texas Instruments ordering information. The ambient limit, junction temperature, load, and thermal resistance must all be considered together.
How should the TAS5342DDV be thermally managed?
The TAS5342DDV should be thermally managed by connecting its exposed pad to a properly designed PCB thermal area and using the recommended copper and heat-spreading arrangement. The device can dissipate substantial power in Class D output operation, and a small-area footprint can raise junction temperature quickly. Validate the design with the datasheet thermal information and the expected worst-case output power.
What is the commercial lead time for the TAS5342DDV?
Current lead time and order quantity should be confirmed through the Request a Quote form on this page. The listing information identifies the exact MPN and package, but it does not establish a reliable current manufacturing or delivery commitment. Submit the required quantity, shipment destination, and target schedule so procurement can confirm availability and timing.
Where can I buy the TAS5342DDV online?
Use the Request a Quote form on this page to request TAS5342DDV pricing, stock confirmation, and delivery information. The exact part is a 100-W stereo Class D power stage in a 44-HTSSOP package. Because procurement conditions can change, the quote form is the appropriate channel for current commercial confirmation without relying on a static price listing.
What are the key specifications of the TAS5342DDV?
The TAS5342DDV is a Texas Instruments Class D stereo digital amplifier power stage rated at up to 100 W per channel, packaged in 44-HTSSOP, with differential inputs and differential BTL outputs. It supports an 8-ohm maximum load, uses a listed 0 V to 34 V supply range, and includes integrated protection against multiple fault conditions. These are the principal parameters to check against the target speaker and power supply.

Справочные инженерные данные для TAS5342DDV — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the TAS5342DDV when your design needs a high-power Class D stereo stage, specifically a device identified for operation at up to 100 W per channel with differential inputs and differential BTL outputs. It is a strong fit for powered speakers, home-theater receivers, soundbars, and multimedia systems when the supply rail, speaker impedance, output filtering, and PCB thermal design meet the device requirements. TAS5142DDVR is a related TI Class D power-stage alternative identified in the comparison data, but it should be selected only after checking its datasheet for lower or different power capability and verifying its pin, control, protection, and thermal compatibility. Do not use a generic power-amplifier substitute solely because it is also a 44-HTSSOP Class D device. For any approved alternative, compare the complete pin-description table, recommended application circuit, exposed-pad connection, output topology, supply range, and protection thresholds. This conservative approach prevents a package-level match from becoming a board-level reliability problem.

Сравнение с аналогами

Параметр Этот товар TAS5142DDVR
Brand Texas Instruments Texas Instruments
Package 44-HTSSOP 44-HTSSOP
Product Type Stereo digital amplifier power stage Class D audio power stage

Ключевые отличия

  • High-power stereo output capability (против TAS5142DDVR)
  • Differential BTL signal path (против TAS5142DDVR)
  • Integrated multi-fault protection (против TAS5142DDVR)

Заметки по проектированию

Design the 44-HTSSOP thermal pad as a heat spreader rather than treating it as a decorative connection. Connect the exposed pad to the recommended ground and copper plane, use the manufacturer layout guidance, and provide thermal vias where the PCB stack-up allows them. The listed 2000 mW typical maximum power dissipation is a device-level reference point, not a thermal design guarantee; actual dissipation depends on output power, supply voltage, efficiency, and modulation.

Keep the Class D output-current loop as compact as possible and place the required output filtering close to the power-stage pins. Separate the noisy switching-node region from input, control, and ground-return paths, and provide local supply bypass capacitance according to the manufacturer application circuit. High-current supply traces should use wide copper geometry, while the ground return must preserve the thermal-pad connection.

Do not select this device from the 100-W headline rating alone. Confirm supply voltage, speaker impedance, output-filter values, allowed channel configuration, idle behavior, and thermal limits for the exact system. Also verify that the target footprint exposes the correct thermal pad and that all power-stage pins are assigned from the TI pin-description table. A similarly named amplifier may share the package name but differ in control, output, or protection behavior.

Treat the TAS5342 as a high-current switching power stage, not as a conventional low-power analog amplifier. Route digital modulation and control signals away from the output switching region, use a low-impedance ground reference for the input and power sections, and test speaker connections for EMI emissions. External filtering and shielding requirements depend on the modulation index, switching rate, speaker cable length, and system enclosure.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status is identified in the available product information.

Данные проверены: 2026-11-10 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

TAS5342DDV datasheet TAS5342DDV pinout TAS5342DDV datasheet pdf TAS5342DDV equivalent TAS5342DDV replacement TAS5342DDV cross reference TAS5342DDV 100W class D TAS5342DDV 44-HTSSOP TAS5342DDV vs TAS5142DDVR Texas Instruments TAS5342DDV TAS5342DDV powered speaker amplifier TAS5342DDV price TAS5342DDV stock TAS5342DDV lead time TAS5342DDV schematic

Связанные компоненты & термины

Texas Instruments TAS5342DDV TAS5342 TAS5142DDVR Class D amplifier digital amplifier power stage stereo amplifier bridge-tied load BTL differential input differential output 44-HTSSOP surface mount integrated protection system 100 W per channel 8 ohm speaker load power management IC semiconductor Class D modulation audio DSP PWM processor TAS5086 speaker output filter thermal pad harmonic distortion
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ