TMS320DM357ZWT - 270 MHz Digital Media SoC | Texas Instruments
Артикул: TMS320DM357ZWT ✓ АктивенTMS320DM357ZWT Обзор
A Digital Media System-on-Chip is a semiconductor platform that integrates a processor core, specialized DSP acceleration, memory interfaces, and communications peripherals. The DMSoC category sits between conventional microcontrollers, application processors, and standalone digital signal processors. This integration allows media, networking, and control products to execute control software and real-time signal-processing tasks without combining several separate devices.
The principal characteristics include a 270 MHz operating frequency, a 361-ball fine-pitch BGA package, and integrated I2C, SPI, USB, UART, and Ethernet connectivity. Its mixed ARM926EJ-S and C64x+ processing architecture supports control-plane software alongside computation-intensive filtering, media processing, and communications workloads. The 361-NFBGA construction provides a large, fine-pitch routing interface but requires advanced PCB layout and inspection capability.
The device combines an ARM926EJ-S core with dedicated C64x+ DSP resources, allowing a designer to partition an application between conventional control functions and parallel signal-processing operations. Its high pin count supports extensive external interfaces and power distribution, while the fine-pitch package demands controlled escape routing and careful via planning. Because the package exposes many high-speed signals, board-level signal integrity and thermal performance are as important as processor throughput.
Typical uses include digital media gateways, network communications equipment, industrial monitoring systems, embedded audio and control products, and Ethernet-connected multimedia appliances. The integrated Ethernet and serial interfaces make the DMSoC particularly relevant to equipment that must process real-time data while communicating over standard embedded-network links.
For a new layout, follow the manufacturer's ball-grid-array land pattern and pin-description tables exactly, provide multiple power connections, and route high-speed interfaces with controlled impedance and return paths. Check the processor clock, memory topology, and peripheral pin multiplexing in the datasheet before finalizing software and board support.
This page combines manufacturer device information, package and interface facts, drop-in replacement status, application guidance, and practical PCB-design considerations to support component selection and hardware implementation.
Аналоги без доработки для TMS320DM357ZWT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Для этого товара нет аналогов без доработки.
Запросить аналогиTMS320DM357ZWT Характеристики
| Product Type | Digital Media System-on-Chip (DMSoC) |
| Processor Core | ARM926EJ-S |
| DSP Architecture | C64x+ |
| Operating Frequency | 270 MHz |
| Package Type | 361-NFBGA |
| Package Dimensions | 16 x 16 mm |
| Ball Count | 361 balls |
| Тип монтажа | Surface-mount BGA |
| Integrated Interfaces | I2C, SPI, USB, UART, and Ethernet |
Руководство по цоколевке TMS320DM357ZWT в корпусе 16 x 16 mm
Цоколевка для TMS320DM357ZWT (корпус 16 x 16 mm). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для TMS320DM357ZWT.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
TMS320DM357ZWT подходит для 6 применениеs: Industrial Ethernet Media Gateway, Network Video Processing, Embedded Audio Processing, Industrial Data Acquisition, Digital Media Processor, Communication Control Node.
Industrial Ethernet Media Gateway
The TMS320DM357ZWT fits an Ethernet media gateway because it combines a 270 MHz ARM926EJ-S control core, C64x+ DSP acceleration, and integrated Ethernet in one system-on-chip. Ethernet traffic can be managed by the ARM side while filtering, buffering, or transforming real-time media data uses the DSP resources. The 361-NFBGA package reduces the number of separate interface devices, although its 0.8 mm ball pitch requires fine-pitch PCB assembly. Validate Ethernet timing, isolation strategy, thermal rise, and the external memory architecture in the design.
Рекомендуется
Network Video Processing
The TMS320DM357ZWT is appropriate for network video equipment that requires real-time signal processing alongside network and service interfaces. Its 270 MHz ARM926EJ-S core can manage control tasks, while C64x+ resources can accelerate filtering or media-data operations. Integrated Ethernet, USB, UART, and SPI reduce the need for separate interface controllers for common embedded designs. The principal design trade-off is board complexity: the 361-ball fine-pitch BGA requires controlled escape routing, inspection, and a qualified assembly process.
Рекомендуется
Embedded Audio Processing
The TMS320DM357ZWT supports embedded audio products that combine control, network connectivity, and programmable signal processing. The C64x+ DSP architecture can execute filtering and other real-time audio operations, while the ARM926EJ-S core handles the control plane and communications stack. Its integrated I2C and SPI interfaces can connect to audio codecs, converters, and configuration devices, and Ethernet can carry synchronized control or media traffic. Board design must preserve analog and digital ground partitioning, route clocks carefully, and provide clean power to noise-sensitive circuits.
Рекомендуется
Industrial Data Acquisition
The TMS320DM357ZWT can serve as the processing hub in an industrial acquisition system that must evaluate sensor data and transmit results over a network. Its 270 MHz ARM core supports operating-system and supervisory functions, while C64x+ resources perform filtering or other computation-intensive operations. Ethernet provides the upstream link, and UART, SPI, and I2C support sensors, local displays, converters, and service ports. For deployment in a factory, verify temperature requirements, isolation boundaries, EMC performance, and watchdog or fault-recovery behavior before release.
Рекомендуется
Digital Media Processor
The TMS320DM357ZWT is well suited to digital media processors because it combines a 270 MHz ARM926EJ-S core, C64x+ signal-processing architecture, and multiple communications interfaces in a single 361-NFBGA device. General-purpose software can coordinate media pipelines while DSP code handles filtering or other data-intensive operations. Ethernet and USB support external services and high-speed peripherals, while SPI and I2C connect to storage or codec devices. The integrated design simplifies system partitioning, but software architecture and external memory performance must be evaluated as a complete subsystem.
Рекомендуется
Communication Control Node
The TMS320DM357ZWT is suitable for a communication control node that must manage protocols, process local data, and provide multiple serial interfaces. The ARM926EJ-S processor handles control software and the C64x+ resources support computation-heavy functions, while integrated Ethernet, UART, SPI, USB, and I2C cover common field and service connections. The 361-NFBGA package allows a compact implementation, though its 0.8 mm pitch requires short escape paths and careful power-plane design. Production use should include communication timing tests, thermal validation, and firmware recovery planning.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для TMS320DM357ZWT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Product Type | Digital Media System-on-Chip (DMSoC) |
| Brand | Texas Instruments |
| Package | 361-NFBGA, 16 x 16 mm |
| Processor Core | ARM926EJ-S |
| DSP Architecture | C64x+ |
| Operating Frequency | 270 MHz |
| Integrated Interfaces | I2C, SPI, USB, UART, and Ethernet |
| Ball Count | 361 balls |
| Pin Compatibility | No verified drop-in alternative |
Ключевые отличия
- Integrated communications reduce the need for separate companion controllers (против ADSP-TS101SAB2-100)
- Combines general-purpose control with dedicated signal processing (против ADSP-TS101SAB2-100)
- More compact package option than the documented comparison candidate (против ADSP-TS101SAB2-100)
Заметки по проектированию
Create the board footprint from the Texas Instruments 361-NFBGA land-pattern data rather than a generic BGA template. Preserve the specified ball pitch, pad geometry, solder-mask definition, and assembly footprint. With 361 balls at 0.8 mm pitch, escape routing becomes a primary design constraint; use short routes between the device and memory or transceiver components, and reserve clean breakout layers for high-speed signals.
Follow the datasheet's power-pin grouping, decoupling, and recommended supply topology exactly. Place local ceramic capacitors at the device supply pins using the shortest possible ground-return paths, and connect multiple power and ground balls according to the manufacturer pin table. Validate voltage limits and sequencing before powering the board, because incorrect rail connections can permanently damage the DMSoC.
Estimate the total dissipation from the selected processor core, memory, and I/O activity rather than using CPU utilization alone. The 361-NFBGA package concentrates heat beneath the device, so copper pours, thermal vias, and board airflow must be evaluated across the full operating mode. Use the manufacturer thermal model and maximum junction temperature, and confirm the result in a chamber or thermal-chamber test for the final enclosure.
Review clock, memory, Ethernet, USB, and other high-speed interfaces in the datasheet for timing and routing guidance. Maintain continuous reference planes, avoid stubs, and match impedance to the specified interface characteristics. Keep switching and high-current return paths away from sensitive clock and communication routing where practical, and validate edge rates with an eye diagram rather than relying only on schematic inspection.
Do not treat a generic DSP or a device with a similar clock rate as a drop-in replacement. A valid substitution must match the 361-NFBGA footprint, ball functions, supply architecture, memory interface, peripheral multiplexing, clocking, software support, and qualification requirements. Use the pin-description and power-connection tables in the manufacturer datasheet for the final design review.
Информация о соответствии
Current manufacturer material-compliance declarations should be requested for the exact TMS320DM357ZWT orderable suffix.
