TMS320DM369ZCEF - 432MHz DaVinci Digital Media Processor | TI
Артикул: TMS320DM369ZCEF ✓ АктивенTMS320DM369ZCEF Обзор
A digital signal processor, or DSP, is a semiconductor optimized to execute mathematical operations on sampled signals in parallel with minimal instruction overhead. A digital media SoC extends that DSP architecture with specialized multimedia interfaces, memory controllers, security features, and video acceleration. Within the semiconductor hierarchy, the TMS320DM369ZCEF is a DSP, a digital media processor, a system-on-chip, and an embedded processing IC designed for real-time audiovisual data paths.
The principal feature of this device is its 432 MHz processing rate, which supports computationally intensive video processing within a compact embedded package. Its processing architecture is identified as 16-bit/32-bit, allowing software to use compact 16-bit operations while supporting 32-bit application data. Dedicated H.264 capabilities can reduce the processor burden associated with multiformat video encoding and closed-loop decode workflows, improving throughput compared with a general-purpose processor performing the same work without hardware acceleration.
The 338-pin NFBGA (ZCE) construction exposes a high pin count for memory, multimedia, control, and power connectivity, making board layout and via-in-pad assembly important parts of implementation. The 13 mm by 13 mm body reduces board area compared with many discrete processor solutions, but it does not remove the need for careful high-speed routing, controlled impedance, continuous return paths, and decoupling. The 1.35 V core rail and 1.8 V or 3.3 V I/O rails require a carefully partitioned power architecture to isolate processor, memory, and external interfaces.
Typical applications include 1080p H.264 video encoding, closed-loop video decoding, digital media gateways, industrial imaging systems, networked video equipment, and embedded multimedia appliances. Its dedicated video acceleration is especially useful where predictable throughput, deterministic control, and compact system integration matter more than general-purpose ecosystem simplicity. The processor can also form the control and media-processing core of a camera, display, video-conferencing, or video-transport product when the board design supplies suitable memory, clocking, storage, and network interfaces.
System designers should evaluate the entire signal chain rather than treating the processor as a standalone component. Place decoupling capacitance at each appropriate supply pin, route clocks with short low-jitter paths, match impedance on high-speed memory and interface signals, and provide continuous ground planes beneath the BGA. Confirm the pin arrangement and recommended layout directly against the Texas Instruments data sheet before routing because a 338-ball package leaves little room for trial-and-error PCB changes.
This product record combines the processor identity, clock rate, package format, media capability, architecture hierarchy, replacement assessment, and practical integration guidance in one reference. It also distinguishes manufacturer-confirmed characteristics from engineering values that still require design verification, helping engineers move from component selection to PCB, thermal, power, and signal-integrity planning with fewer assumptions.
Аналоги без доработки для TMS320DM369ZCEF — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Для этого товара нет аналогов без доработки.
Запросить аналогиTMS320DM369ZCEF Максимальные параметры и электрические характеристики
| Product Type | DaVinci Digital Media Processor / Digital Media System-on-Chip |
| Processor Clock Frequency | 432 MHz |
| Instruction Word Architecture | 16-bit/32-bit |
| Core Supply Voltage | 1.35 V |
| I/O Supply Voltage | 1.8 V or 3.3 V |
| Maximum Video Resolution | 1080p |
| Maximum Video Frame Rate | 30 fps |
| Video Codec Support | H.264 encoding and closed-loop decoding |
| Package Type | NFBGA (ZCE) |
| Package Pin Count | 338 pins |
| Package Body Dimensions | 13 mm x 13 mm |
| Тип монтажа | Surface mount |
| Статус RoHS | Compliant |
| Core Architecture | ARM-based control with dedicated digital signal processing and video acceleration |
| Application Segment | Digital media, industrial imaging, and embedded video processing |
Руководство по цоколевке TMS320DM369ZCEF в корпусе 13 mm x 13 mm
Цоколевка для TMS320DM369ZCEF (корпус 13 mm x 13 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для TMS320DM369ZCEF.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
TMS320DM369ZCEF подходит для 6 применениеs: 1080p H.264 Video Encoding, Closed-Loop Video Decoding, Industrial Imaging and Machine Vision, Digital Media Gateway, Video Conferencing Endpoint, Network Video Appliance.
1080p H.264 Video Encoding
The TMS320DM369ZCEF fits 1080p H.264 encoding systems because its dedicated media-processing hardware can handle encoding at up to 30 fps while the 432 MHz digital signal processor manages the surrounding real-time pipeline. This combination is useful for camera controllers, video gateways, and industrial capture systems that must compress video without relying entirely on a separate encoder. The implementation should use the manufacturer data sheet for ball assignments, clock requirements, DDR memory topology, and boot configuration. System planners should also verify bit rate, channel count, storage throughput, and thermal performance, because the stated 1080p capability does not remove the bandwidth or power demands of moving compressed video continuously.
Рекомендуется
Closed-Loop Video Decoding
The TMS320DM369ZCEF supports closed-loop H.264 decoding at up to 1080p and 30 fps, making it appropriate for systems that must acquire, process, and display video through a coordinated pipeline. The 432 MHz DSP core handles deterministic signal-processing tasks while dedicated video logic accelerates codec operations. This architecture can simplify a media appliance compared with a processor-only implementation that must emulate much of the codec workload in software. Designers should evaluate output interface timing, frame-buffer capacity, memory bandwidth, display synchronization, and sustained thermal rise. The exact decoding mode and simultaneous interface activity must be confirmed against the manufacturer data sheet before system capacity is committed.
Рекомендуется
Industrial Imaging and Machine Vision
The TMS320DM369ZCEF is suitable for industrial imaging controllers that combine deterministic sensor timing with real-time H.264 processing. Its 432 MHz DSP-oriented architecture can support frame acquisition, preprocessing, encoding, and communication in one processor-centric design, while the dedicated media engine reduces the computational cost of 1080p-class video. A practical implementation must match the chosen sensor interface, external memory bandwidth, trigger latency, and data-retention requirements. Isolation, robust power conversion, thermal monitoring, and long-term component sourcing also matter in industrial environments. Use the manufacturer pin and clock documentation to establish the sensor interface and boot sequence before routing high-speed signals on the multilayer PCB.
Рекомендуется
Digital Media Gateway
A digital media gateway can use the TMS320DM369ZCEF to normalize and encode video streams while coordinating storage and network transport. The processor's H.264 capability supports efficient 1080p compression, and its DSP architecture provides deterministic workload handling for packetization and media timing. The 338-pin NFBGA also allows dense integration of external memory and communication interfaces, making the device appropriate for compact gateways with limited board area. Engineering effort must focus on memory topology, sustained throughput, boot reliability, network buffering, and thermal management. The gateway should be designed around the manufacturer power, clock, and DDR-interface requirements, with high-speed routing and supply distribution verified through signal-integrity and power-integrity analysis.
Рекомендуется
Video Conferencing Endpoint
The TMS320DM369ZCEF can serve as the media engine in a compact video-conferencing endpoint that captures camera imagery, processes it locally, and prepares encoded output for transmission. Its dedicated H.264 capability and 432 MHz processing rate support real-time multimedia tasks, while the integrated digital media architecture reduces reliance on separate codec devices. A practical endpoint also needs microphone or camera interfaces, network connectivity, memory, and display or preview control. Latency, echo behavior, frame pacing, and sustained bandwidth therefore matter more than peak codec performance alone. Reference the manufacturer data sheet for peripheral muxing and clock requirements, and validate the complete camera-to-network path to avoid decoder and encoder delays accumulating across the system.
Рекомендуется
Network Video Appliance
The TMS320DM369ZCEF is appropriate for a network video appliance that must ingest one or more camera streams, perform H.264 encoding, and expose the results through a network interface. Dedicated codec acceleration and deterministic DSP execution make the processor useful where predictable media latency matters. The 13 mm by 13 mm NFBGA helps reduce enclosure size, but its 338 balls require a multilayer PCB with careful power distribution, continuous references, and precise escape routing. Designers must define storage throughput, packet buffering, authentication strategy, thermal ceiling, and watchdog behavior before release. The appliance should use the manufacturer memory and boot requirements as the foundation, then validate sustained 1080p operation rather than relying only on short isolated encoding tests.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для TMS320DM369ZCEF — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Brand | Texas Instruments |
| Package | 338-pin NFBGA (ZCE), 13 mm x 13 mm |
| Processor Type | DaVinci digital media processor |
| Clock Frequency | 432 MHz |
| Instruction Architecture | 16-bit/32-bit |
| Core Supply Voltage | 1.35 V |
| I/O Supply Voltage | 1.8 V or 3.3 V |
| Video Capability | H.264 encoding and closed-loop decoding up to 1080p at 30 fps |
| Package Pin Count | 338 pins |
| Mounting Type | Surface mount |
Ключевые отличия
- Dedicated 1080p H.264 media acceleration (против General-purpose application processor)
- Deterministic DSP-oriented processing architecture (против Host CPU without dedicated signal-processing resources)
- High integration in a compact package (против Discrete codec-plus-controller implementation)
Заметки по проектированию
Design the 338-pin NFBGA layout directly from the ZCE land pattern rather than approximating it from a generic BGA. Use the manufacturer-defined ball map to route power, ground, clocks, memory, and high-speed interfaces, and confirm via-in-pad and solder-mask requirements with the selected assembly process. A multilayer board with uninterrupted ground references is strongly preferable because the 1.35 V core and high pin count make power and return-path discontinuities especially consequential.
Partition the 1.35 V core rail from the 1.8 V and 3.3 V I/O domains, then place the prescribed bypass capacitance close to each relevant supply ball. Check the manufacturer power-up and power-down sequencing limits before connecting external regulators. Keep high-current return paths short and use multiple ground connections through the package footprint so that simultaneous H.264 processing and external I/O activity do not create excessive supply droop.
Estimated thermal planning should begin with the estimated processor power dissipation under the target 432 MHz and 1080p H.264 workload divided by the package and board thermal resistance. Those values must be obtained from electrical characterization and the applicable PCB stackup because a 13 mm by 13 mm BGA may otherwise hide a substantial junction-temperature rise. Preserve exposed-package heat-transfer features and monitor the design in its enclosure rather than relying on board-level airflow alone.
Route clock and high-speed memory signals over continuous reference planes with the impedance values specified by the manufacturer interface requirements. Keep the clock source and PLL-support components close to the device, minimize stub branches, and provide local return vias alongside high-speed nets. DDR and other wide-bus routing should be length-adjusted as a complete topology, with signal-integrity simulation performed for the intended layer stack and manufacturing tolerances.
Информация о соответствии
RoHS compliance is identified in the product listing. REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals declarations are not specified in the available product information.