TS944BIN - Quad Rail-to-Rail Low-Power Op Amp | STMicroelectronics
Артикул: TS944BIN ✓ АктивенTS944BIN Обзор
An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify voltage differences between its input terminals. The TS944 belongs to the operational-amplifier hierarchy, combining rail-to-rail input and output capability with micropower operation. Rail-to-rail behavior is particularly useful when signals must be processed across most or all of the device supply range.
The TS94x family combines four amplifiers with a supply current of 1.2 µA per amplifier and a maximum input offset voltage of 5000 µV. Its input bias current is specified at 0.15 nA, making it suitable for high-impedance sensor interfaces when bias-current loading must be controlled. Rail-to-rail output voltage swing supports portable, industrial-control, and low-voltage measurement systems.
The TS944 is intended for general-purpose analog applications rather than high-speed signal processing. Its four independent channels can be configured as noninverting amplifiers, inverting amplifiers, voltage followers, comparators, or transimpedance amplifiers. The common quad package also simplifies power distribution and reduces the number of separate analog packages required on a board.
Typical uses include battery-powered instrumentation, current-loop receivers, sensor-conditioning circuits, low-voltage audio paths, and general industrial control systems. Four matched functional channels can process several related signals in one assembly, while the low 1.2 µA supply current helps limit power consumption in portable and energy-limited equipment.
Designers should verify input and output common-mode limits, output-current capability, stability with the selected load capacitance, and noise performance for the intended signal bandwidth. Input and output bypassing should follow the manufacturer's recommended application circuit, and unused amplifier channels should be configured conservatively rather than left open.
This page combines device specifications, practical application guidance, commercial-request instructions, and a careful assessment of replacement options. It also distinguishes confirmed drop-in substitutes from functional alternatives that would require engineering review, helping designers avoid treating similar op amps as automatic PCB replacements.
Аналоги без доработки для TS944BIN — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Для этого товара нет аналогов без доработки.
Запросить аналогиTS944BIN Максимальные параметры и электрические характеристики
| Number of Amplifier Circuits | 4 circuits |
| Product Type | General-purpose operational amplifier |
| Supply Voltage Range | 2.5 V to 10 V |
| Диапазон рабочих температур | -40°C to +85°C |
| Supply Current per Amplifier | 1.2 µA |
| Input Offset Voltage, Maximum | 5000 µV |
| Input Bias Current | 0.15 nA |
| Common-Mode Rejection Ratio | 85 dB |
| Rail-to-Rail Output Swing | Rail-to-rail |
| Package Type | 14-pin DIP |
| Terminal Count | 14 terminals |
| Mounting Method | Through-hole |
Конфигурация выводов TS944BIN
| Контакт 1 | OUT1 — Output of amplifier 1 |
| Контакт 2 | IN1- — Inverting input of amplifier 1 |
| Контакт 3 | IN1+ — Noninverting input of amplifier 1 |
| Контакт 4 | V- — Negative supply terminal |
| Контакт 5 | IN2+ — Noninverting input of amplifier 2 |
| Контакт 6 | IN2- — Inverting input of amplifier 2 |
| Контакт 7 | OUT2 — Output of amplifier 2 |
| Контакт 8 | OUT3 — Output of amplifier 3 |
| Контакт 9 | IN3- — Inverting input of amplifier 3 |
| Контакт 10 | IN3+ — Noninverting input of amplifier 3 |
| Контакт 11 | V+ — Positive supply terminal |
| Контакт 12 | IN4+ — Noninverting input of amplifier 4 |
| Контакт 13 | IN4- — Inverting input of amplifier 4 |
| Контакт 14 | OUT4 — Output of amplifier 4 |
Типичное применение
TS944BIN подходит для 6 применениеs: Battery-Powered Sensor Interfaces, Industrial Process-Control Modules, Low-Voltage Audio Signal Conditioning, Portable Measurement Instruments, RS-485 and Communication Interfaces, Low-Power Monitoring and Alarm Circuits.
Battery-Powered Sensor Interfaces
The TS944BIN fits low-power sensor interfaces because each of its four amplifiers operates from 2.5 V to 10 V while consuming 1.2 µA. Its 0.15 nA input bias current limits loading on high-impedance sources, and rail-to-rail output swing improves usable signal range in compact battery-powered instruments. Four channels can condition separate sensor outputs within one 14-pin DIP. Designers should include the 5000 µV maximum input offset in the accuracy budget and verify common-mode limits at the actual signal and supply levels.
Рекомендуется
Industrial Process-Control Modules
TS944BIN provides four general-purpose amplification channels in one 14-pin DIP for process-control equipment handling low-level analog signals. Its 85 dB listed common-mode rejection supports attenuation of common-mode noise, while the -40°C to +85°C operating range covers industrial environments. The quad arrangement can serve pressure, temperature, or valve-feedback interfaces without requiring four separate amplifier packages. Layout should preserve a quiet ground path and place decoupling capacitors close to pins 4 and 11.
Рекомендуется
Low-Voltage Audio Signal Conditioning
The TS944BIN can condition multiple low-voltage audio or instrumentation signals where rail-to-rail output swing helps preserve signal range. Its four channels support mixer, headphone-driver, microphone-preamp, or line-output stages operating from a 2.5 V to 10 V supply. The 1.2 µA per-amplifier supply current reduces power demand, although output-current capability and capacitive-load stability must be checked for the selected load. Grounding and decoupling are particularly important when small signals pass through shared analog circuitry.
Рекомендуется
Portable Measurement Instruments
TS944BIN is suitable for portable measurement instruments requiring multiple analog channels, modest supply voltage, and low quiescent consumption. Four amplifier sections can provide gain, inversion, filtering, or buffering for transducers and data-conversion front ends within a single DIP package. The 0.15 nA bias current is advantageous with high-impedance probes, while 85 dB common-mode rejection improves rejection of common-mode interference. The 5000 µV offset limit remains significant in precision measurements and should be included in calibration or system-error calculations.
Рекомендуется
RS-485 and Communication Interfaces
The TS944BIN can support the analog side of low-speed communication interfaces, including receiver filtering, level conditioning, and loopback amplification. Four channels provide flexibility for receive, transmit-enable monitoring, and isolation-related signal conditioning. Its low 1.2 µA supply current is useful in distributed or battery-backed interface nodes, while the 2.5 V to 10 V range accommodates multiple logic ecosystems. Interface timing, slew rate, and common-mode requirements should be confirmed against the communications standard rather than inferred from the amplifier specifications alone.
Рекомендуется
Low-Power Monitoring and Alarm Circuits
TS944BIN can implement threshold monitoring, alarm generation, and analog signal comparison in battery-backed monitoring systems. Its four channels can independently amplify sensor outputs before comparison or level detection, and rail-to-rail operation increases usable signal span at low supply voltages. The 1.2 µA per-channel consumption is useful where standby energy matters. For safety- or mission-critical installations, verify offset error, output behavior near the rails, and noise over the required alarm bandwidth before treating the channels as precision comparators.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для TS944BIN — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Brand | STMicroelectronics |
| Package | 14-pin DIP |
| Number of Amplifiers | 4 circuits |
| Supply Voltage Range | 2.5 V to 10 V |
| Supply Current per Amplifier | 1.2 µA |
| Maximum Input Offset Voltage | 5000 µV |
| Input Bias Current | 0.15 nA |
| Common-Mode Rejection Ratio | 85 dB |
| Operating Temperature Range | -40°C to +85°C |
| Output Capability | Rail-to-rail output voltage swing |
Заметки по проектированию
Place the supply-decoupling capacitor close to pins 4 and 11, and keep analog input and output traces away from switching nodes and high-current return paths. The four channels share one package and supply rail, so a noisy channel can couple into adjacent channels through imperfect grounding or supply impedance. Use a continuous ground plane, short feedback paths, and separate return-current routing to preserve low-level signal integrity.
Estimated: the TS944 family consumes 1.2 µA per amplifier, giving an ideal four-channel supply current of 4.8 µA before load, bias, and leakage effects. This estimate uses 1.2 µA multiplied by four amplifiers. Actual current can differ with input voltage, output loading, temperature, and device grade, so size the supply for the measured operating condition and account for the load current separately.
Do not assume that a generic quad op amp can replace the TS944BIN solely because both use a 14-pin DIP. Validate the complete pinout, supply range, input common-mode range, output swing, offset voltage, bias current, noise, slew behavior, output drive, and capacitive-load stability. If an unused channel is present, configure it as a voltage follower with its input tied to a defined reference within its input range rather than leaving the inputs floating.
Информация о соответствии
Compliance declarations were not established from the manufacturer product page or the associated product listings. No assumption has been made regarding RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.