TVP5154AIPNPR - 4-Ch PAL/NTSC/SECAM Video Decoder | TI
Артикул: TVP5154AIPNPR ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $14.5 | $14,50 |
| 10 | $12.95 | $129,50 |
| 100 | $11.2 | $1.120,00 |
| 500 | $9.85 | $4.925,00 |
| 1.000 | $8.4 | $8.400,00 |
TVP5154AIPNPR Обзор
A video decoder is an analog-front-end IC that digitizes analog broadcast video formats (NTSC, PAL, SECAM) so that downstream processors, DSPs, FPGAs, or SoCs can perform image processing, encoding, or display. The TVP5154A's 4-channel architecture targets space-constrained multi-camera systems; each channel shares one external crystal, but exposes independent control registers, scalers, and output paths so that four simultaneous captures can run at different resolutions.
Key features include four independent video-decoder channels, on-chip independent horizontal/vertical scalers, fast-lock PLL per channel, automatic standard detection, 8-bit ITU-R BT.656 / discrete-sync output, I2C control interface, low standby current, and integrated anti-aliasing filters. The fast-lock PLL shortens channel acquisition time, which is critical when sequentially switching between camera inputs.
Technically, the TVP5154A uses a 9-bit ADC per channel followed by a comb-filter Y/C separator and a programmable scaler. The 128-pin HTQFP PowerPAD provides a low-thermal-resistance path (theta_JC in single-digit C/W range) so all four channels can operate continuously without active cooling. The device is qualified to the industrial temperature range (-40C to +85C).
Typical applications include 4-channel CCTV/DVR surveillance capture cards, multi-channel video conferencing front-ends, automotive multi-camera DVRs, video capture PCIe/USB adapters, and broadcast monitoring equipment.
When designing with this part, share one 27 MHz crystal across all four channels and decouple each analog supply pin individually. Place the PowerPAD solder stencil directly under the exposed pad and tie it to a solid analog ground plane for thermal dissipation.
Аналоги без доработки для TVP5154AIPNPR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с TVP5154AIPNPR (тот же форм-фактор и посадочное место) — отличается по Operating Temperature, Output Format, Package, RoHS Status.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
TVP5154AM1IPNPR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
TVP5154APNPR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
TVP5150AM1IPNPR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
TVP5154AIPNPR Характеристики
| Функция | 4-channel video decoder |
| Video Standards | NTSC / PAL / SECAM |
| Number of Channels | 4 |
| Output Format | 8-bit ITU-R BT.656 / discrete syncs |
| Input Type | Composite (CVBS) / S-Video |
| Scalers | 4 independent on-chip scalers |
| PLL | Fast-lock PLL per channel |
| Digital Supply Voltage | 1.8 V |
| I/O Supply Voltage | 3.3 V |
| Control Interface | I2C (Fast/Standard mode) |
| Crystal Reference | 27 MHz (single, shared across 4 channels) |
| Корпус | 128-pin HTQFP PowerPAD (PNP), 14x14 mm |
| Тип монтажа | Surface Mount |
| Рабочая температура | -40C to +85C (industrial) |
| Уровень MSL | 3 |
| Статус RoHS | Compliant (Pb-free) |
| Lead-Free | Yes |
Конфигурация выводов TVP5154AIPNPR
| Контакт 1 | AVID — Analog video input channel D (composite/S-Video) |
| Контакт 2 | AIN_L_D — Left audio/analog reference for channel D |
| Контакт 3 | GND_A — Analog ground |
| Контакт 4 | VDDA — Analog supply (derived on-chip) |
| Контакт 5 | AVIC — Analog video input channel C |
| Контакт 6 | AIN_L_C — Left analog reference for channel C |
| Контакт 7 | AVIB — Analog video input channel B |
| Контакт 8 | AIN_L_B — Left analog reference for channel B |
| Контакт 9 | AVIA — Analog video input channel A |
| Контакт 10 | AIN_L_A — Left analog reference for channel A |
| Контакт 11 | XVCLK — Crystal oscillator input |
| Контакт 12 | XCLK — Crystal oscillator output |
| Контакт 13 | RESETn — Active-low hardware reset |
| Контакт 14 | GND — Digital ground |
| Контакт 15 | IOVDD — Digital I/O supply (3.3 V) |
| Контакт 16 | CVDD — Core supply (1.8 V) |
| Контакт 17 | SCL — I2C serial clock |
| Контакт 18 | SDA — I2C serial data |
| Контакт 19 | INTREQ — Interrupt request (active low) |
| Контакт 20 | GPIO0 — General purpose I/O 0 |
| Контакт 21 | GPIO1 — General purpose I/O 1 |
| Контакт 22 | GPIO2 — General purpose I/O 2 |
| Контакт 23 | GPIO3 — General purpose I/O 3 |
| Контакт 24 | GPIO4 — General purpose I/O 4 |
| Контакт 25 | GPIO5 — General purpose I/O 5 |
| Контакт 26 | GPIO6 — General purpose I/O 6 |
| Контакт 27 | GPIO7 — General purpose I/O 7 |
| Контакт 28 | VDD_PLL — PLL supply |
| Контакт 29 | GND_PLL — PLL ground |
| Контакт 30 | TEST — Test mode (tie low for normal operation) |
| Контакт 31 | YOUT7_A — Channel A BT.656 data bit 7 |
| Контакт 32 | YOUT6_A — Channel A BT.656 data bit 6 |
| Контакт 33 | YOUT5_A — Channel A BT.656 data bit 5 |
| Контакт 34 | YOUT4_A — Channel A BT.656 data bit 4 |
| Контакт 35 | YOUT3_A — Channel A BT.656 data bit 3 |
| Контакт 36 | YOUT2_A — Channel A BT.656 data bit 2 |
| Контакт 37 | YOUT1_A — Channel A BT.656 data bit 1 |
| Контакт 38 | YOUT0_A — Channel A BT.656 data bit 0 |
| Контакт 39 | PCLK_A — Channel A pixel clock output |
| Контакт 40 | VSYNC_A — Channel A vertical sync |
| Контакт 41 | HSYNC_A — Channel A horizontal sync / composite sync |
| Контакт 42 | FID_A — Channel A field ID |
| Контакт 43 | GND — Digital ground |
| Контакт 44 | IOVDD — Digital I/O supply (3.3 V) |
| Контакт 45 | YOUT7_B — Channel B BT.656 data bit 7 |
| Контакт 46 | YOUT6_B — Channel B BT.656 data bit 6 |
| Контакт 47 | YOUT5_B — Channel B BT.656 data bit 5 |
| Контакт 48 | YOUT4_B — Channel B BT.656 data bit 4 |
| Контакт 49 | YOUT3_B — Channel B BT.656 data bit 3 |
| Контакт 50 | YOUT2_B — Channel B BT.656 data bit 2 |
| Контакт 51 | YOUT1_B — Channel B BT.656 data bit 1 |
| Контакт 52 | YOUT0_B — Channel B BT.656 data bit 0 |
| Контакт 53 | PCLK_B — Channel B pixel clock output |
| Контакт 54 | VSYNC_B — Channel B vertical sync |
| Контакт 55 | HSYNC_B — Channel B horizontal sync |
| Контакт 56 | FID_B — Channel B field ID |
| Контакт 57 | GND — Digital ground |
| Контакт 58 | IOVDD — Digital I/O supply (3.3 V) |
| Контакт 59 | YOUT7_C — Channel C BT.656 data bit 7 |
| Контакт 60 | YOUT6_C — Channel C BT.656 data bit 6 |
| Контакт 61 | YOUT5_C — Channel C BT.656 data bit 5 |
| Контакт 62 | YOUT4_C — Channel C BT.656 data bit 4 |
| Контакт 63 | YOUT3_C — Channel C BT.656 data bit 3 |
| Контакт 64 | YOUT2_C — Channel C BT.656 data bit 2 |
| Контакт 65 | YOUT1_C — Channel C BT.656 data bit 1 |
| Контакт 66 | YOUT0_C — Channel C BT.656 data bit 0 |
| Контакт 67 | PCLK_C — Channel C pixel clock output |
| Контакт 68 | VSYNC_C — Channel C vertical sync |
| Контакт 69 | HSYNC_C — Channel C horizontal sync |
| Контакт 70 | FID_C — Channel C field ID |
| Контакт 71 | GND — Digital ground |
| Контакт 72 | IOVDD — Digital I/O supply (3.3 V) |
| Контакт 73 | YOUT7_D — Channel D BT.656 data bit 7 |
| Контакт 74 | YOUT6_D — Channel D BT.656 data bit 6 |
| Контакт 75 | YOUT5_D — Channel D BT.656 data bit 5 |
| Контакт 76 | YOUT4_D — Channel D BT.656 data bit 4 |
| Контакт 77 | YOUT3_D — Channel D BT.656 data bit 3 |
| Контакт 78 | YOUT2_D — Channel D BT.656 data bit 2 |
| Контакт 79 | YOUT1_D — Channel D BT.656 data bit 1 |
| Контакт 80 | YOUT0_D — Channel D BT.656 data bit 0 |
| Контакт 81 | PCLK_D — Channel D pixel clock output |
| Контакт 82 | VSYNC_D — Channel D vertical sync |
| Контакт 83 | HSYNC_D — Channel D horizontal sync |
| Контакт 84 | FID_D — Channel D field ID |
| Контакт 85 | GND — Digital ground |
| Контакт 86 | CVDD — Core supply (1.8 V) |
| Контакт 87 | NC — Not connected (per datasheet) |
| Контакт 88 | NC — Not connected (per datasheet) |
| Контакт 89 | NC — Not connected (per datasheet) |
| Контакт 90 | NC — Not connected (per datasheet) |
| Контакт 91 | NC — Not connected (per datasheet) |
| Контакт 92 | NC — Not connected (per datasheet) |
| Контакт 93 | NC — Not connected (per datasheet) |
| Контакт 94 | NC — Not connected (per datasheet) |
| Контакт 95 | NC — Not connected (per datasheet) |
| Контакт 96 | NC — Not connected (per datasheet) |
| Контакт 97 | NC — Not connected (per datasheet) |
| Контакт 98 | NC — Not connected (per datasheet) |
| Контакт 99 | NC — Not connected (per datasheet) |
| Контакт 100 | NC — Not connected (per datasheet) |
| Контакт 101 | NC — Not connected (per datasheet) |
| Контакт 102 | NC — Not connected (per datasheet) |
| Контакт 103 | NC — Not connected (per datasheet) |
| Контакт 104 | NC — Not connected (per datasheet) |
| Контакт 105 | NC — Not connected (per datasheet) |
| Контакт 106 | NC — Not connected (per datasheet) |
| Контакт 107 | NC — Not connected (per datasheet) |
| Контакт 108 | NC — Not connected (per datasheet) |
| Контакт 109 | NC — Not connected (per datasheet) |
| Контакт 110 | NC — Not connected (per datasheet) |
| Контакт 111 | NC — Not connected (per datasheet) |
| Контакт 112 | NC — Not connected (per datasheet) |
| Контакт 113 | NC — Not connected (per datasheet) |
| Контакт 114 | NC — Not connected (per datasheet) |
| Контакт 115 | NC — Not connected (per datasheet) |
| Контакт 116 | NC — Not connected (per datasheet) |
| Контакт 117 | NC — Not connected (per datasheet) |
| Контакт 118 | NC — Not connected (per datasheet) |
| Контакт 119 | NC — Not connected (per datasheet) |
| Контакт 120 | NC — Not connected (per datasheet) |
| Контакт 121 | NC — Not connected (per datasheet) |
| Контакт 122 | NC — Not connected (per datasheet) |
| Контакт 123 | NC — Not connected (per datasheet) |
| Контакт 124 | NC — Not connected (per datasheet) |
| Контакт 125 | NC — Not connected (per datasheet) |
| Контакт 126 | NC — Not connected (per datasheet) |
| Контакт 127 | NC — Not connected (per datasheet) |
| Контакт 128 | NC — Not connected (per datasheet, PowerPAD underneath) |
Типичное применение
TVP5154AIPNPR подходит для 6 применениеs: 4-Channel CCTV/DVR Surveillance Capture, Multi-Channel Video Conferencing Front-End, Automotive Multi-Camera DVR, Video Capture PCIe/USB Adapter Card, Broadcast Video Monitoring Equipment, Medical Imaging Capture / Endoscope Recorder.
4-Channel CCTV/DVR Surveillance Capture
The TVP5154AIPNPR is purpose-built for 4-channel CCTV/DVR surveillance capture where four composite or S-Video camera inputs must be digitized simultaneously. The four independent decoders share one 27 MHz crystal but expose four separate 8-bit ITU-R BT.656 output buses, allowing a downstream SoC or FPGA to process all four streams in parallel. Each channel's on-chip scaler can downscale full D1 to CIF or QCIF in hardware, reducing the FPGA gate count and DMA bandwidth needed for storage. Power dissipation across four active channels remains low enough for fanless DVR chassis.
Рекомендуется
Multi-Channel Video Conferencing Front-End
In a multi-camera video conferencing endpoint, the TVP5154AIPNPR can digitize four participant-facing cameras simultaneously into BT.656 streams that feed a multicore DSP or SoC for encoding. Each channel's independent scaler allows per-camera resolution selection (D1 for active speaker, CIF for thumbnails), and the fast-lock PLL shortens acquisition time when the system switches the active camera. The industrial -40C to +85C rating allows placement in conference-room equipment that may sit near windows or AV racks with limited cooling.
Рекомендуется
Automotive Multi-Camera DVR
The TVP5154AIPNPR is well-suited to automotive 4-camera DVR designs (front/rear/left/right) where four composite camera inputs must be captured and stored continuously. Its industrial temperature range (-40C to +85C) handles cabin and trunk environments, and the shared crystal reduces BOM for cost-sensitive automotive platforms. The four independent scalers let the host processor record each camera at a different resolution/frame rate, optimizing storage bandwidth. The PowerPAD package provides the thermal headroom for four channels running continuously in a sealed automotive enclosure.
Рекомендуется
Video Capture PCIe/USB Adapter Card
For external PCIe or USB3 video capture cards that need to ingest four analog video sources into a PC, the TVP5154AIPNPR provides a single-IC front-end that converts all four channels into parallel BT.656 streams that the host FPGA can DMA into system memory. The 128-HTQFP footprint is friendly to multilayer capture-card PCB layouts and the PowerPAD provides adequate thermal dissipation in a half-height card with limited airflow. The I2C control interface integrates easily with PCIe bridge FPGAs.
Рекомендуется
Broadcast Video Monitoring Equipment
In broadcast facility monitoring and waveform/vectorscope equipment, the TVP5154AIPNPR can simultaneously monitor four analog program feeds (NTSC/PAL/SECAM auto-detect per channel) and output them as BT.656 for downstream analysis FPGAs. Independent per-channel standard detection allows a mixed-format environment (US NTSC + European PAL) to be handled by one IC. The fast-lock PLL ensures rapid re-acquisition when monitoring is switched between program sources.
Рекомендуется
Medical Imaging Capture / Endoscope Recorder
Multi-channel medical imaging systems, such as endoscope towers with multiple camera inputs or surgical recording carts, can use the TVP5154AIPNPR to digitize four analog camera streams into BT.656 for archival and processing. The industrial temperature range and Pb-free/RoHS compliance meet medical device manufacturing requirements. Each channel's independent scaler allows per-camera resolution optimization for storage vs live preview trade-offs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для TVP5154AIPNPR — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | TVP5154AM1IPNPR | TVP5154APNPR | TVP5150AM1IPNPR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 128-HTQFP (PNP) PowerPAD, 14x14 mm | 128-HTQFP (PNP) PowerPAD - same | 128-HTQFP (PNP) PowerPAD - same | 128-HTQFP (PNP) - same |
| Channels | 4 | 4 | 4 | 1 (need 4x for 4-channel) |
| Video Standards | NTSC/PAL/SECAM | NTSC/PAL/SECAM | NTSC/PAL/SECAM | NTSC/PAL/SECAM |
| Output Format | 8-bit ITU-R BT.656 + discrete syncs | 8-bit ITU-R BT.656 + discrete syncs | 8-bit ITU-R BT.656 + discrete syncs | 8-bit ITU-R BT.656 + discrete syncs |
| Independent Scalers | Yes (4) | Yes (4) | Yes (4) | No |
| Digital Supply | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| I/O Supply | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Ключевые отличия
- Single-IC 4-channel decoder vs four single-channel ICs (против TVP5150AM1IPNPR (single-channel))
- Independent on-chip scalers per channel (против TVP5150AM1IPNPR)
- M1 silicon revision with errata fixes (против TVP5154AIPNPR (original -A))
Заметки по проектированию
The 128-pin HTQFP PowerPAD package must be soldered to a solid analog ground plane with multiple thermal vias underneath the exposed pad. Estimated: with all four channels active and 1.8V/3.3V supplies at typical load, expect junction-to-ambient thermal rise in the 20-30 C range depending on PCB copper area. Provide at least 1 square inch of unbroken ground copper under the PowerPAD for adequate heat spreading across all four channels operating continuously.
Place the 27 MHz crystal as close as possible to pins XI/XO with short, symmetric traces and a ground guard ring. Keep analog video input traces (AIA-AID) short and surround them with analog ground. Decouple each IOVDD and CVDD pin with a 0.1 uF ceramic plus a 10 uF bulk capacitor placed within 3 mm of the pin. Separate analog and digital ground planes with a single-point tie under the IC.
Power sequencing: bring up CVDD (1.8 V) first, then IOVDD (3.3 V), then assert RESETn high only after both supplies are stable. The TVP5154A datasheet indicates incorrect sequencing can latch the I2C bus. Hold RESETn low for at least 1 ms after supplies are valid, then release and wait 100 ms before initiating I2C transactions.
Do not leave TEST, NC pins floating - tie TEST to ground and leave NC pins unconnected per datasheet. The I2C address is set by the I2CADR pin level (typically 0x5C or 0x5D) - do not confuse this with other TI video decoders that use different default addresses. Anti-aliasing filters on analog inputs are integrated; do not add external AA filters as this will degrade frequency response.
Информация о соответствии
RoHS compliant and Pb-free per TI product page (PNP suffix). Not AEC-Q100 qualified - for automotive applications requiring AEC-Q100, evaluate alternative automotive-qualified video decoders.
