W77L058A25DL - 8-Bit 25MHz 8051 MCU | Nuvoton | 40-Pin PDIP
Артикул: W77L058A25DL ✓ АктивенW77L058A25DL Обзор
An 8051-compatible microcontroller is a general-purpose embedded-control device built around an 8-bit processing core, program memory, data memory, I/O ports, timers, serial communication peripherals, and interrupt control. The W77L058A belongs to the broader hierarchy of 8051 core → 8-bit microcontroller → embedded processor → semiconductor. Its DIP format also places it in the through-hole package family and makes it useful for prototype boards, educational systems, and industrial controllers assembled with sockets.
Key features include 25 MHz operation, 32 KB (32K × 8) Flash program memory, 1 KB (1K × 8) RAM, 32 general-purpose I/O ports, and an 8-bit data bus. Flash memory supports repeated firmware updates, while the 32 I/O pins provide substantial direct interfacing capacity for digital inputs, outputs, displays, relays, and external peripherals. The 2.7 V to 5.5 V supply range allows operation across common industrial and embedded voltage levels.
The W77L058A25DL uses the enhanced 8051 CISC architecture, with an 8-bit data path and program-memory organization typical of that family. Its 40-pin PDIP package exposes 32 I/O functions alongside the core interface and power pins. Unlike a surface-mount design, the through-hole DIP format is particularly convenient for insertion into standard development sockets and can simplify hand assembly, inspection, and replacement.
Typical uses include educational 8051 trainers, appliance controllers, small industrial automation modules, digital I/O concentrators, LED displays, and embedded interface boards. The combination of 32 KB Flash, 32 I/O lines, and a 25 MHz clock is suitable for control-oriented firmware that must coordinate multiple discrete inputs and outputs. Designers should still confirm peripheral availability, oscillator requirements, reset behavior, and exact pin assignments in the manufacturer datasheet.
For a new design, check the 40-pin footprint, supply decoupling, clock circuit, programming method, and reset requirements before layout. Use a standard 0.1-inch pitch footprint compatible with the PDIP package and route sensitive clock and reset signals away from noisy switching nodes. Firmware development should use the manufacturer-supported 8051 toolchain and verify all register definitions against the device documentation.
This page combines the key operating limits, package details, application guidance, and replacement considerations into a design-focused reference. It also highlights the distinction between a true pin-compatible replacement and a merely similar 8-bit microcontroller, helping engineers avoid choosing a component that requires board changes, firmware changes, or an external clock interface.
Аналоги без доработки для W77L058A25DL — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Для этого товара нет аналогов без доработки.
Запросить аналогиW77L058A25DL Максимальные параметры и электрические характеристики
| Microcontroller Type | 8-bit 8051 CISC microcontroller |
| Maximum Clock Speed | 25 MHz |
| Program Memory Size | 32 KB (32K × 8) |
| Program Memory Type | Flash |
| RAM Size | 1 KB (1K × 8) |
| Разрядность шины данных | 8 bit |
| Number of I/O Ports | 32 |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Supported Supply Levels | 3.3 V and 5 V |
| Корпус | 40-pin PDIP |
| Тип монтажа | Through-hole |
| Статус RoHS | Compliant |
| Lead-Free Status | Lead-free |
| Статус жизненного цикла | Active |
| Core Architecture | 8051-compatible 8-bit CISC |
| DIP Pin Count | 40 pins |
Руководство по цоколевке W77L058A25DL в корпусе 40-pin pdip
Цоколевка для W77L058A25DL (корпус 40-pin pdip). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для W77L058A25DL.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
W77L058A25DL подходит для 6 применениеs: Educational 8051 Trainer, Industrial Digital I/O Controller, Appliance Control Board, LED Display Controller, Embedded Interface Board, Automation and Sensor Node.
Educational 8051 Trainer
The W77L058A25DL fits an educational 8051 trainer because it combines an 8-bit 8051-compatible core, 25 MHz operation, 32 KB of Flash, 1 KB of RAM, and 32 I/O ports in a socket-friendly 40-pin PDIP package. Students can use the I/O lines for switches, LEDs, keypads, seven-segment displays, and basic sensor experiments while retaining access to the familiar 8051 programming model. The DIP format also makes the MCU easy to replace on training boards. Confirm clock, reset, and programming connections against the manufacturer datasheet before constructing the trainer.
Рекомендуется
Industrial Digital I/O Controller
The W77L058A25DL can serve as the controller in a compact digital I/O module because its 32 I/O ports provide substantial parallel interfacing capability. The 8-bit 8051-compatible core is suitable for reading switches and sensors, sequencing outputs, and managing simple alarm or relay logic. A 2.7 V to 5.5 V supply range supports common embedded rails, while the 40-pin PDIP package simplifies socketed assembly. For industrial deployment, add appropriate isolation, surge protection, fusing, grounding, and enclosure design according to the application’s environmental requirements.
Рекомендуется
Appliance Control Board
The W77L058A25DL is appropriate for an appliance controller that must coordinate multiple discrete signals within a limited 8-bit embedded architecture. Its 32 KB Flash memory provides room for application firmware, 1 KB of RAM supports working variables and control state, and the 32 I/O ports can connect buttons, indicators, latches, or sensor inputs. Operation up to 25 MHz supports typical event-driven control tasks. Validate operating temperature, load-driver interfaces, watchdog behavior, and appliance safety requirements separately because these functions cannot be established from the basic device ratings.
Рекомендуется
LED Display Controller
The W77L058A25DL can control multiplexed LED displays because its 32 I/O ports offer enough parallel lines for display segments, drive-enable signals, and supporting digital inputs. The 25 MHz 8051-compatible core provides useful timing headroom for refresh and key-scanning routines, while 32 KB of Flash accommodates display tables and application logic. In a high-current design, use suitable transistor or driver stages and isolate display current from the MCU supply. The 40-pin PDIP format is also convenient for prototype display boards and socket-based maintenance designs.
Рекомендуется
Embedded Interface Board
The W77L058A25DL is well matched to a small embedded interface board built around an 8-bit control core. Its 32 I/O ports can connect digital sensors, pushbuttons, relay drivers, status lamps, and external bus transceivers, while 32 KB Flash supports protocol handling and configuration logic. The 2.7 V to 5.5 V operating range permits integration across 3.3 V and 5 V system rails. Designers should verify the available timer, UART, interrupt, and programming resources in the datasheet before assigning communication channels or relying on a particular peripheral configuration.
Рекомендуется
Automation and Sensor Node
The W77L058A25DL can serve as a local automation or sensor node when the system requires modest processing, numerous digital inputs, and firmware held in rewritable Flash. The 8-bit CPU and 1 KB RAM are suitable for sampling, thresholding, state-machine, and reporting tasks, while the 25 MHz clock supports responsive polling. A 40-pin PDIP package makes the controller practical for prototype boards and socketed field modules. Production designs should add appropriate environmental protection, calibrated analog front ends where needed, and protection appropriate to exposed wiring and surge environments.
Рекомендуется
Справочные инженерные данные для W77L058A25DL — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Package | 40-pin PDIP |
| Brand | Nuvoton Technology Corporation |
| Microcontroller Type | 8-bit 8051 CISC microcontroller |
| Maximum Clock Speed | 25 MHz |
| Program Memory | 32 KB (32K × 8) Flash |
| RAM | 1 KB (1K × 8) |
| Data Bus Width | 8 bit |
| Number of I/O Ports | 32 |
| Supply Voltage Range | 2.7 V to 5.5 V |
| RoHS Status | Compliant |
Ключевые отличия
- Documented 25 MHz operating point (против MC74F538N)
- Substantial parallel I/O capacity (против MC74F538N)
- Flexible embedded supply range (против MC74F538N)
Заметки по проектированию
Design the footprint around a standard 40-pin PDIP with 0.1-inch row spacing. Keep the through-hole pin holes and courtyard clear of nearby components, and verify the package drawing and pin-1 orientation against the manufacturer datasheet. Because the device is a through-hole DIP rather than a surface-mount part, allow adequate insertion clearance and provide mechanical support where vibration or repeated maintenance is expected.
Plan the 2.7 V to 5.5 V supply rail so it remains within the operating range across input tolerance, temperature, and transient conditions. Place the required input bypass capacitor close to the supply and ground pins, and keep high-current switching paths away from the MCU. Check every attached peripheral for voltage compatibility because the 3.3 V and 5 V capability does not automatically make mixed-voltage interfaces safe.
Use short, direct connections for the clock, reset, and programming signals, and keep them away from relay coils, inductive components, and switching nodes. Route the 32 I/O signals according to their assigned functions in the datasheet, reserving any multiplexed pins for their intended peripheral use. A grounded plane and deliberate return-path arrangement will reduce coupling between digital control signals and external interface wiring.
Do not select a replacement solely because it is labeled an 8-bit or 8051 microcontroller. The candidate must match the 40-pin PDIP footprint, 25 MHz clock requirement, 32 KB Flash, 1 KB RAM, 32 I/O ports, 2.7 V to 5.5 V supply range, interrupt map, timer resources, and peripheral configuration. Review oscillator, reset, and programming requirements as well, because firmware and board changes can make a nominally similar device unsuitable.
Информация о соответствии
The product listing identifies W77L058A25DL as RoHS compliant and lead-free. REACH, AEC-Q100, halogen-free, and conflict-minerals status were not established.