WM8718SEDS/V - 24-Bit Stereo Audio DAC | Cirrus Logic
Артикул: WM8718SEDS/V ✓ АктивенWM8718SEDS/V Обзор
A DAC is a digital-to-analog converter, a signal-conversion integrated circuit that transforms sampled digital audio into an analog voltage suitable for amplification and loudspeaker output. Within the broader semiconductor hierarchy, the WM8718SEDS/V belongs to the ADC/DAC class of data-conversion ICs and ultimately to the integrated-circuit category. It provides the output-side conversion function in a digital audio signal chain, typically following a source, codec, decoder, or digital audio processor.
The manufacturer datasheet identifies the WM8718SEDS/V as a 24-bit DAC operating to 192 kHz with digital signal processing, I2S connectivity, differential stereo outputs, and volume control. These features distinguish it from basic fixed-output DACs: differential output architecture supports balanced audio routing, while integrated volume control allows output-level adjustment without relying exclusively on a separate analog attenuator. The I2S interface also provides a conventional connection to digital audio processors and application processors.
The 20-SSOP package supports compact, surface-mount PCB construction while exposing the required digital, analog, clock, and power connections. Because the converter handles both digital and analog signals, board implementation requires careful partitioning. The digital interface and clock signals should remain separated from the differential analog outputs, with the manufacturer’s recommended application circuit and pin description used as the basis for component placement and trace routing.
Typical uses include multichannel consumer-audio receivers, powered speakers, sound-bar signal paths, digital mixing consoles, portable listening equipment, and embedded audio systems that require a compact stereo DAC. The 192 kHz capability is useful when the source material and upstream signal path support that rate, although operating at the maximum rate generally requires correspondingly clean clocking, layout, and power delivery.
Designers should verify the required master clock, I2S word length, sample-rate configuration, output load, and external filtering against the manufacturer datasheet before layout release. Differential routing should be treated as a matched pair, and the analog return path should connect cleanly to the device ground reference. These controls help preserve channel balance and reduce distortion introduced by the PCB rather than by the converter itself.
This product page combines the exact manufacturer and distributor identifiers, organizes the documented conversion and interface capabilities, and adds application, comparison, replacement, and layout guidance. It is intended to help engineers narrow a DAC choice by resolution, sample rate, interface, package, output architecture, and assembly requirements before completing a production BOM.
Аналоги без доработки для WM8718SEDS/V — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
WM8718SEDS/RV
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
WM8714SEDS/V
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
WM8716SEDS/V
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →WM8721SEDS/V
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
WM8722SEDS/V
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
WM8718SEDS/V Максимальные параметры и электрические характеристики
| Product Type | 24-bit differential stereo digital-to-analog converter |
| Converter Resolution | 24 bit |
| Maximum Sample Rate | 192 kHz |
| Digital Audio Interface | I2S |
| Digital Signal Processing | Supported |
| Output Architecture | Differential stereo |
| Volume Control | Integrated digital volume control |
| Number of DAC Channels | 2 channels |
| Корпус | 20-SSOP |
| Тип монтажа | Surface mount |
| Статус RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Руководство по цоколевке WM8718SEDS/V в корпусе 20-ssop
Цоколевка для WM8718SEDS/V (корпус 20-ssop). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для WM8718SEDS/V.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
WM8718SEDS/V подходит для 6 применениеs: High-Resolution Consumer Audio Receiver, Powered Speaker and Amplifier Front End, Digital Mixing Console Signal Path, Portable Audio and Headphone Amplifier Front End, Network and Communication Audio Terminal, Digital Audio Test and Measurement Equipment.
High-Resolution Consumer Audio Receiver
The WM8718SEDS/V fits the final digital-to-analog stage of a receiver, television, or sound-bar design that accepts I2S audio. Its 24-bit conversion capability and operation up to 192 kHz provide headroom for high-resolution source material, while differential stereo outputs support a balanced connection to downstream analog circuitry. Integrated digital volume control can simplify signal-level adjustment and reduce the need for a separate control device in the audio path. The 20-SSOP package also supports compact surface-mount layouts. Designers should match the converter’s clock and interface requirements to the audio processor, preserve matched routing for each differential channel, and implement the manufacturer-recommended output filtering for stable, low-distortion analog output.
Рекомендуется
Powered Speaker and Amplifier Front End
The WM8718SEDS/V can provide the conversion stage immediately before a stereo power amplifier in a powered speaker, active bookshelf speaker, or compact monitor system. I2S input supports connection to a digital audio host, and the converter’s 24-bit resolution and 192 kHz maximum sample rate support high-resolution playback architectures. Differential outputs are useful when the downstream amplifier accepts balanced signals, helping preserve channel balance and reject coupled noise on the analog path. The device’s integrated volume control supports system-level output adjustment, although the final gain structure must prevent clipping. Confirm the master-clock mode, I2S alignment, permitted sample rates, and external reconstruction filter against the manufacturer circuit before PCB release.
Рекомендуется
Digital Mixing Console Signal Path
The WM8718SEDS/V is suitable for a digital mixer or studio monitoring path that uses an I2S source and requires a compact stereo DAC stage. The 24-bit conversion format and operation to 192 kHz align with high-resolution multichannel audio workflows, while differential outputs can feed balanced monitoring or line-level circuitry. Digital volume control offers a convenient level-control point downstream of digital processing. Because studio systems are sensitive to clock jitter, grounding, and channel matching, the implementation should follow the manufacturer’s layout guidance and use matched output routing. External filtering and output loading must also conform to the datasheet reference circuit. The converter should be positioned so clock and digital traces remain isolated from the sensitive differential analog outputs.
Рекомендуется
Portable Audio and Headphone Amplifier Front End
The WM8718SEDS/V can serve as the digital conversion stage in a portable audio product, wireless speaker, or headphone-amplifier front end that receives I2S data from a host processor. The compact 20-SSOP package supports space-constrained assemblies, and the 24-bit, 192 kHz-capable converter allows the same architecture to support high-resolution source formats. Differential outputs can feed a balanced headphone driver or line stage, while integrated digital volume control supports system-level adjustment. The primary design concern is power integrity because digital switching and analog output circuitry share a small board area. Keep the I2S and clock traces away from the differential outputs, provide local supply bypassing as specified, and confirm output swing, load, and filtering requirements for the selected headphone or line driver.
Рекомендуется
Network and Communication Audio Terminal
The WM8718SEDS/V fits communication terminals and networked audio products that receive digital audio over an I2S link and need a high-resolution analog stereo output. The interface supports connection to digital signal processors, communication processors, or application processors, while the 192 kHz maximum sample rate provides support for high-rate audio streams. Differential stereo outputs can feed line receivers or amplifiers, and integrated volume control simplifies output attenuation. In a network product, clock integrity and electromagnetic interference control remain important because high-speed digital activity can couple into the analog output stage. Route the I2S and clock nets as compact, controlled-impedance paths, keep analog traces away from digital activity, and use the manufacturer’s grounding and filtering arrangement. Confirm that the host supplies the exact clock and data format required by the converter.
Рекомендуется
Digital Audio Test and Measurement Equipment
The WM8718SEDS/V can be used in audio test equipment, signal generators, and digital audio analyzers that convert stored or synthesized I2S data into analog waveforms. Its 24-bit resolution and operation up to 192 kHz are useful for precision signal-generation and measurement tasks, while the differential output can improve rejection of ground noise in a sensitive test fixture. Integrated volume control provides an additional output-variable control for calibration setups. Instrumentation designs must still assess noise, distortion, linearity, and clock performance against the manufacturer limits before claiming measurement accuracy. Use a clean analog reference, follow the recommended output-filter network, and treat the differential pair as a matched signal path. This configuration is most appropriate when the test system already supplies compatible digital audio clocks and data.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для WM8718SEDS/V — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | WM8718SEDS/RV | WM8714SEDS/V | WM8716SEDS/V | WM8721SEDS/V | WM8722SEDS/V |
|---|---|---|---|---|---|---|
| Package | 20-SSOP | 20-SSOP | 20-SSOP | 20-SSOP | 20-SSOP | 20-SSOP |
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic |
Ключевые отличия
- Exact same-family ordering option with the closest procurement path (против WM8718SEDS/RV)
- Differential stereo output with integrated level adjustment (против WM8714SEDS/V)
- High-resolution I2S conversion with digital signal processing (против WM8716SEDS/V)
Заметки по проектированию
Partition the PCB so the I2S data, clock, and control traces remain on the digital side of the converter while each differential analog output remains on the analog side. Route the positive and negative conductor of each channel as a matched pair, avoid crossing digital activity beneath the analog outputs, and minimize loop area around the output-filter network. Use the manufacturer application circuit and pin-description table as the authoritative basis for separating analog and digital return paths.
Follow the manufacturer’s recommended analog and digital supply connections and place local bypass capacitors next to the associated device pins. Keep switching-regulator and high-current return paths away from the DAC’s sensitive analog-output region. Because the listed specifications establish 24-bit conversion up to 192 kHz but do not state the complete supply specification, verify voltage rails, tolerances, startup behavior, and decoupling values directly from the manufacturer datasheet before schematic and layout approval.
Do not treat any stereo DAC with an I2S interface as a drop-in replacement merely because its resolution appears similar. Confirm the master-clock frequency and mode, sample-rate support, I2S data alignment, word length, logic levels, supply rails, pin assignments, output topology, and external filter requirements. For WM8718SEDS/V replacement, compare every net against the 20-SSOP pin table and confirm the differential output polarity before energizing a revised board.
Treat each differential analog channel as a matched, continuous signal path from the converter pins through filtering to the destination amplifier. Use symmetrical component placement where practical, keep stub lengths short, and avoid routing one output conductor near unrelated digital or switching nets. If the operating sample rate reaches 192 kHz, verify clock jitter, analog noise, distortion, and output-load performance against the manufacturer limits with the intended external filter and downstream circuit.
Информация о соответствии
No explicit environmental or automotive qualification statements were included in the manufacturer and distributor product records reviewed for this part. Current Cirrus Logic material-declaration documentation should be requested for the exact ordering code before production release.
