WM8960CGEFL/V 24-Bit Stereo Codec with 1W Drivers
Артикул: WM8960CGEFL/V ✓ АктивенWM8960CGEFL/V Обзор
An audio codec is a mixed-signal semiconductor that converts digital audio data into analog signals and analog sound into digital data. In the broader IC hierarchy, the WM8960 belongs to the audio-interface and codec family, combining an ADC, DAC, input and output routing, headphone amplification, and Class D speaker drivers within a single package. This integration can simplify portable-audio designs by reducing the number of separate analog and mixed-signal devices required on a circuit board.
Key features include 24-bit audio resolution, stereo Class D output capable of 1 W per channel into 8 ohm loads at a 5 V supply, and dedicated headphone-driver support. The 5 mm by 5 mm QFN package has a 1.00 mm height and uses 32 terminals. Its operating temperature range extends from -40 °C to +85 °C, making it relevant to portable consumer equipment, mobile accessories, compact audio systems, and other space-constrained products.
The device combines several signal paths in one package: digital audio interfaces, stereo conversion channels, analog inputs, headphone outputs, microphone amplification, and speaker-driver stages. Its integrated speaker capability is especially useful where a compact two-channel audio system is required without deploying separate discrete speaker amplifiers. Designers still need to select the correct digital interface mode, external filtering components, speaker loads, and decoupling network for the intended system.
Typical applications include portable media players, headset and docking-station electronics, mobile-device accessories, portable radios, compact recording products, and battery-powered audio equipment. The integrated headphone and speaker outputs can shorten analog routing in designs where the codec must support both private listening and amplified stereo playback. Battery-operated systems also benefit from consolidating multiple audio functions into one package, although final power consumption depends on the selected mode and output loading.
PCB implementation should prioritize short, quiet analog and digital-audio routes, solid ground-plane continuity, and placement of decoupling capacitors close to their associated supply pins. Speaker and headphone outputs require attention to EMI and output-noise coupling, while digital interface signals should remain separated from sensitive microphone and analog paths. Follow the manufacturer datasheet for the exact pin assignments, exposed-pad connection, recommended application circuit, and component values.
This page organizes the verified device identity, package information, operating limits, sourcing details, cross-reference findings, and practical implementation guidance into a compact engineering reference. It also distinguishes documented drop-in options from broader functional alternatives so that PCB replacement decisions are based on actual compatibility rather than codec similarity alone.
Аналоги без доработки для WM8960CGEFL/V — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с WM8960CGEFL/V (тот же форм-фактор и посадочное место) — отличается по Package, Product Type.
WM8960CGEFL/RV
✅ Прямая заменаУточнить цену
Открыть даташит →WM8960GEFL/RV
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
WM8960CGEFL/V Характеристики
| Product Type | Stereo audio codec with integrated Class D speaker and headphone drivers |
| Audio Resolution | 24 bit |
| Number of Audio Channels | 2 channels |
| Class D Speaker Output Power | 1 W per channel |
| Class D Speaker Output Power at 4 V | 1 W per channel into 8 ohms |
| Speaker Output Supply | 5 V |
| Корпус | 32-QFN (HVQCCN) |
| Package Dimensions | 5 mm x 5 mm |
| Package Height | 1.00 mm |
| Terminal Count | 32 terminals |
| Диапазон рабочих температур | -40 °C to +85 °C |
| Тип монтажа | Surface mount |
| Integrated Functions | Stereo ADC, stereo DAC, headphone drivers, and Class D speaker drivers |
Руководство по цоколевке WM8960CGEFL/V в корпусе 1.00 mm
Цоколевка для WM8960CGEFL/V (корпус 1.00 mm). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для WM8960CGEFL/V.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
WM8960CGEFL/V подходит для 6 применениеs: Portable Media Player, Headset and Docking Station, Portable Recording Device, Mobile Device Audio Accessory, Compact Stereo Speaker System, Battery-Powered Radio.
Portable Media Player
The WM8960CGEFL/V fits portable media players that require headphone playback, microphone recording, and efficient stereo speaker output in a compact board area. Its 24-bit stereo codec provides the central conversion path, while the integrated 1 W per channel Class D drivers can reduce the need for separate audio-output circuitry when driving 8 ohm speakers from 5 V. The 5 mm by 5 mm QFN preserves board area, and the -40 °C to +85 °C range suits products exposed to varying ambient conditions. Design the power rails around the codec, speaker outputs, and headphone output stage, and use the manufacturer application circuit to establish filtering and decoupling.
Рекомендуется
Headset and Docking Station
The WM8960CGEFL/V is suitable for a headset or docking station that must support digital-audio playback, headset microphone capture, and integrated speaker amplification. The headphone-driver function keeps the analog output path close to the codec, while the stereo Class D section can drive two 8 ohm channels at up to 1 W per channel from a 5 V supply. This integration is useful in compact accessories where several external audio blocks would increase footprint and routing complexity. The design should isolate microphone input routing from speaker outputs, preserve a quiet analog ground path, and validate acoustic output against the actual enclosure and speaker load.
Рекомендуется
Portable Recording Device
The WM8960CGEFL/V can anchor a compact recording device that accepts digital audio while also providing monitored headphone output and optional speaker playback. Its 24-bit stereo codec architecture suits portable capture products requiring a small converter footprint, and its integrated headphone and Class D output stages provide flexible monitoring and playback paths. Designers should allocate clean supply rails for the analog and digital sections, route microphone inputs away from switching outputs, and follow the manufacturer filtering recommendations. The operating range of -40 °C to +85 °C supports consumer and industrial portable equipment where the final enclosure may experience significant temperature variation.
Рекомендуется
Mobile Device Audio Accessory
The WM8960CGEFL/V is appropriate for a mobile-device audio accessory that converts digital playback into analog headphone or speaker signals. Its integrated 24-bit stereo codec, headphone output, and dual 1 W Class D channels allow a compact accessory to provide more than simple pass-through audio. The small 5 mm by 5 mm QFN is particularly useful where connector placement, battery volume, and enclosure area constrain the board. System designers should budget for local decoupling, controlled analog grounding, Class D output filtering, and EMI margins around the speaker stages, while confirming that the device's digital interface matches the host controller.
Рекомендуется
Compact Stereo Speaker System
The WM8960CGEFL/V can serve as the audio hub of a compact two-speaker system when each channel uses an 8 ohm load and the supply supports the documented 1 W per channel output from 5 V. Integrating the Class D drivers with the codec reduces the number of separate signal-chain blocks and keeps the audio path compact. The practical limit is set by speaker sensitivity, available battery voltage, filter losses, and thermal conditions rather than codec headline capability alone. Use low-ESR supply bypassing, maintain short speaker-current returns, and place output filters according to the manufacturer reference design to avoid excess EMI.
Рекомендуется
Battery-Powered Radio
The WM8960CGEFL/V fits a battery-powered radio that requires digital-audio processing, headphone monitoring, and local loudspeaker playback. Combining a 24-bit stereo codec with integrated headphone and speaker drivers limits the number of discrete components in a space-constrained enclosure. Low-voltage operation should be assessed using the manufacturer supply-range and power-management specifications before final battery selection. The layout must keep switching-driver and Class D output-current paths away from sensitive audio routing, while the system integrator should verify output power, headphone range, and thermal behavior with the production speaker and enclosure.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для WM8960CGEFL/V — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | WM8960CGEFL/RV | WM8960GEFL/RV |
|---|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Package | 32-QFN (HVQCCN) | 32-QFN (5x5) - same package class | 32-pin QFN - same package class |
| Product Function | Stereo audio codec with Class D speaker and headphone drivers | Stereo audio interface with Class D speaker drivers | Stereo audio codec |
| Integrated Headphone Driver | Yes | Yes | Yes |
| Integrated Class D Speaker Driver | Yes | Yes | Yes |
| Terminal Count | 32 terminals | 32 terminals | 32 terminals |
Ключевые отличия
- Combines stereo conversion, headphone drive, and Class D speaker output (против WM8960GEFL/RV)
- Direct same-family sourcing candidate with matching package class (против WM8960CGEFL/RV)
- Compact 5 mm by 5 mm integration for portable equipment (против Discrete codec plus speaker-amplifier approach)
Заметки по проектированию
Follow the manufacturer application circuit for input, output, and supply decoupling. Place each decoupling capacitor directly beside its associated power pin, preserve uninterrupted ground-plane continuity, and route high-current Class D speaker returns away from microphone and headphone signal paths. The exposed pad must be connected according to the datasheet's thermal and electrical requirements rather than treated as an unused mechanical feature.
Separate the digital audio interface, analog input, headphone output, and speaker-driver sections into distinct layout zones. Keep the codec's analog ground reference coherent, avoid routing switching-node or speaker-return current beneath sensitive inputs, and use the manufacturer output-filter topology. These practices reduce channel crosstalk, microphone pickup, EMI radiation, and disturbance caused by the integrated Class D stages.
Do not assume that all WM8960 orderable suffixes are automatically interchangeable. Confirm the exact suffix, temperature grade, packing format, exposed-pad implementation, and commercial terms in the manufacturer ordering information. Also verify that the chosen digital interface and control configuration are supported by the host firmware; a matching package alone does not establish complete system compatibility.
Validate the complete analog and speaker power budget at the minimum battery voltage, not only at the nominal 5 V operating point. The documented 1 W per channel capability is specified for 8 ohm loads at 5 V, so actual output, thermal performance, and headphone range can change with supply conditions and load impedance. Use the manufacturer limits and recommended power architecture for each operating mode.
Информация о соответствии
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact WM8960CGEFL/V orderable part.