WM9094ECS/R - 2W Mono Class D/AB Amplifier | Cirrus Logic
Артикул: WM9094ECS/R ✗ Снят с производстваWM9094ECS/R Обзор
An audio amplifier is an integrated circuit that converts an input audio signal into sufficient output power to drive a loudspeaker or other transducer. Class AB amplifiers provide linear operation with comparatively continuous output current, while Class D amplifiers switch the output stage to improve power-conversion efficiency. The WM9094ECS/R supports both operating modes, giving designers flexibility according to their efficiency, distortion, and thermal requirements.
Key features include Class D and Class AB output capability, a 2 W maximum output-power rating into 4 ohms, integrated depop circuitry, integrated thermal protection, and a surface-mount 20-WCSP package. The 2.7 V minimum supply voltage supports portable and space-constrained equipment, while the 5.5 V maximum supply voltage accommodates common low-voltage power rails.
The WM9094ECS/R is identified as a mono, one-channel amplifier rather than a multi-channel power amplifier. Its compact 2.53 mm by 2.07 mm package can reduce board area in mobile accessories, personal-audio products, and other integrated audio equipment. The manufacturer and distributor listings identify it as an ultra-low-power audio subsystem and list the part as obsolete.
Typical applications include compact speaker systems, portable audio accessories, and low-voltage embedded products where a single amplified channel is sufficient. System-level implementation must account for the 2.7 V to 5.5 V supply range, speaker impedance, output power, thermal conditions, and the small-area land-pattern requirements of the 20-WCSP package.
The principal design consideration is the obsolete lifecycle status. Designers should verify availability, source quality, and long-term supply before committing to a new production design. For a new design with obsolete risk, engineers may need to qualify an alternative rather than assume that any Class D or Class AB amplifier is pin compatible.
This page consolidates the verified distributor specifications, lifecycle information, package details, sourcing links, practical application guidance, and an explicit assessment of replacement availability. It also separates documented parameters from missing technical data instead of presenting unverified electrical characteristics as guaranteed specifications.
Аналоги без доработки для WM9094ECS/R — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Для этого товара нет аналогов без доработки.
Запросить аналогиWM9094ECS/R Максимальные параметры и электрические характеристики
| Product Type | 1-channel (mono) audio amplifier IC |
| Тип выхода | Class D, Class AB |
| Maximum Output Power | 2 W into 4 ohm |
| Output Channels | 1 channel |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Корпус | 20-WCSP (2.53 mm x 2.07 mm) |
| Тип монтажа | Surface mount |
| Depop Circuitry | Integrated |
| Thermal Protection | Integrated |
| Description | IC CODEC AUD HUB MULTI-CH WCSP |
| Series | - |
| Part Status | Obsolete |
| Supplier Packaging | Tape and reel |
| Manufacturer | Cirrus Logic Inc. |
Руководство по цоколевке WM9094ECS/R в корпусе 20-wcsp (2.53 mm x 2.07 mm)
Цоколевка для WM9094ECS/R (корпус 20-wcsp (2.53 mm x 2.07 mm)). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для WM9094ECS/R.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
WM9094ECS/R подходит для 6 применениеs: Compact Portable Speaker, Personal Audio Accessory, Embedded Audio Control Board, Low-Voltage Audio Hub, Battery-Powered Monitoring Audio, Industrial Audio Module.
Compact Portable Speaker
The WM9094ECS/R fits a compact speaker design that requires one amplified channel and no more than 2 W into a 4-ohm load. Its documented 2.7 V to 5.5 V supply range is suitable for low-voltage portable systems, while Class D and Class AB operation gives the designer a choice of output approaches. The 20-WCSP package measuring 2.53 mm by 2.07 mm also conserves board area. Designers must confirm acoustic output, battery behavior, thermal conditions, and long-term availability before production use.
Рекомендуется
Personal Audio Accessory
The WM9094ECS/R can serve as the mono amplification stage in a small personal-audio accessory when the speaker load is 4 ohms and the required peak output is no greater than 2 W. Its 2.7 V minimum operating voltage supports low-energy designs, and the surface-mount 20-WCSP package helps minimize PCB footprint. The integrated depop and thermal protection features identified by the distributor data support practical speaker drive. Engineers should verify acoustics and acoustic limits directly against the manufacturer datasheet.
Рекомендуется
Embedded Audio Control Board
The WM9094ECS/R is suitable for an embedded control board that must generate a single mono audio channel within a compact area. Its 20-WCSP footprint is useful where board space is constrained, and the 2.7 V to 5.5 V supply range can align with a low-voltage system rail. The device supports both Class D and Class AB operation, although the supplied evidence does not provide mode-by-mode efficiency or distortion. A new design must also address the part's documented obsolete status.
Рекомендуется
Low-Voltage Audio Hub
The WM9094ECS/R can contribute one mono Class D or Class AB output channel to a low-voltage audio-hub architecture. Its 2 W capability into 4 ohms and 2.7 V to 5.5 V operating range align with compact consumer-audio signal paths, while integrated depop and thermal protection address common loudspeaker-interface concerns. Verification must include the 20-WCSP land pattern, pin functions, output configuration, and thermal behavior. Because the available status information marks the device obsolete, long-term sourcing is a gating requirement.
Рекомендуется
Battery-Powered Monitoring Audio
For battery-powered monitoring equipment needing one compact speaker channel, the WM9094ECS/R provides a documented 2 W output capability at low supply voltage. Class D operation may be considered for a power-conscious implementation, while Class AB remains available for designs that require an alternative output mode. The integrated thermal and depop features provide useful baseline protection. The supplied data does not specify quiescent current, efficiency, or distortion, so battery-life and acoustic design claims require additional manufacturer data or testing.
Рекомендуется
Industrial Audio Module
The WM9094ECS/R can be evaluated for a compact industrial audio module that requires one low-voltage mono output channel. Its surface-mount 20-WCSP package reduces board area, and the 2.7 V to 5.5 V range supports industrial systems using regulated low-voltage rails. Integrated thermal protection is particularly relevant in enclosed equipment, but the available data does not provide junction-temperature limits or thermal resistance. Engineering validation must therefore include thermal testing, EMI assessment, and a resolution for the obsolete supply status.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для WM9094ECS/R — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Product Type | 1-channel (mono) audio amplifier IC |
| Output Type | Class D, Class AB |
| Maximum Output Power | 2 W into 4 ohm |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Package | 20-WCSP (2.53 mm x 2.07 mm) |
| Brand | Cirrus Logic |
| Mounting Type | Surface mount |
| Integrated Features | Depop and thermal protection |
| Lifecycle Status | Obsolete |
Ключевые отличия
- Selectable Class D and Class AB operating modes (против Single-mode generic Class D amplifier)
- Compact mono output footprint (против Larger-package 2 W mono amplifier)
- Low-voltage operation with integrated protection (против Higher-voltage or externally protected amplifier)
Заметки по проектированию
Do not assume the integrated thermal protection eliminates the need for thermal analysis. The verified data confirms thermal protection but does not provide junction-temperature limits, thermal resistance, or dissipation curves. Review the manufacturer datasheet package information, estimate worst-case conduction and switching loss at the selected Class D or Class AB mode, and keep the 20-WCSP within its documented operating limits. For an obsolete part, verify that the original lot and manufacturer marking remain suitable for the required mission profile.
Base the PCB footprint on the manufacturer drawing for the 20-WCSP package rather than the simplified 2.53 mm by 2.07 mm body description alone. Body dimensions do not establish the ball pitch, pad geometry, solder-mask pattern, or exposed-pad arrangement. Confirm land geometry, paste volume, reflow profile, and pad numbering before releasing artwork. Because the supplied evidence does not provide a complete pinout, the datasheet must also be used to confirm every audio, power, ground, and control connection.
Design the supply path for the documented 2.7 V to 5.5 V operating range and for the actual Class D or Class AB mode selected. The available information establishes up to 2 W output into 4 ohms but does not provide efficiency, quiescent current, output configuration, or peak-current limits. Those missing values must be established before calculating battery life, regulator headroom, or copper capability. Add local input decoupling according to the manufacturer layout and stability guidance once those details are available.
A generic 2 W mono amplifier is not automatically a drop-in replacement. The original uses a specialized 20-WCSP footprint and supports two named output modes, but the supplied cross-reference evidence does not identify a pin-compatible substitute. Avoid selecting a replacement based only on wattage, channel count, or Class D labeling. Require a verified land-pattern match, pin-by-pin comparison, equivalent supply range, matching output architecture, and adequate protection before approving a substitution.
Информация о соответствии
The supplied verified data does not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. No compliance status has been inferred from the distributor listings.
