XC3S1000-5FT256C - 1M Gate Spartan-3 FPGA | Xilinx
Артикул: XC3S1000-5FT256C ✗ Снят с производстваXC3S1000-5FT256C Обзор
A field-programmable gate array is a semiconductor whose digital logic, memory blocks, and I/O paths are configured after fabrication. The Spartan-3 FPGA family occupies the hierarchy FPGA, programmable logic device, configurable logic, and semiconductor. This makes the XC3S1000-5FT256C suitable for designs requiring parallel logic, embedded block RAM, programmable interfaces, and field-updatable configurations.
Key features include 17,280 logic cells, 442,368 total RAM bits, 1,000,000 system gates, and 173 user I/O. The -5 suffix denotes a specific speed grade, while the FT256C package designation identifies a 256-ball fine-pitch plastic ball-grid-array configuration. These resources support concurrent control logic, data buffering, interface bridging, and protocol-specific state machines without relying on multiple discrete programmable devices.
The device is based on the Spartan-3 FPGA architecture and provides 1,920 slices as reported by the product listing. Distributed RAM and dedicated block RAM make it useful for small embedded memories, data pipelines, lookup tables, and temporary packet storage. Its 173 available I/O provide broad connectivity for external memory, clocks, serial links, and control signals, although each interface must still be assigned within the device’s supported electrical and timing constraints.
Typical uses include industrial control, telecommunications equipment, data-acquisition systems, embedded instrumentation, and legacy network-interface designs. Its 1M-gate architecture can consolidate parallel control and datapath functions into one package, while the substantial I/O count supports board-level integration with processors, memory devices, transceivers, and custom interface logic.
Design planning must account for the FTFBGA package’s fine pitch, differential-pair routing, via-in-pad and solder-mask requirements, and the very large exposed BGA footprint. Signal integrity, decoupling, configuration-memory implementation, and bank-specific I/O constraints should be reviewed against the manufacturer’s Spartan-3 design guidance before schematic or layout signoff.
This product record combines the exact XC3S1000-5FT256C package and resource details with practical implementation guidance, speed-grade alternatives, and parameter-by-parameter comparison information. It is intended to help engineers identify a configuration-compatible Spartan-3 option and plan the PCB, toolchain, and interface requirements for a maintainable FPGA platform.
Аналоги без доработки для XC3S1000-5FT256C — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
XC3S1000-5FTG256C
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
XC3S1000-4FT256C
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →XC3S1000-3FT256C
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
XC3S1000-2FT256C
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
XC3S1000-1FT256C
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
XC3S1000-5FT256C Максимальные параметры и электрические характеристики
| Device Type | Spartan-3 field-programmable gate array |
| System Gates | 1,000,000 gates |
| Logic Cells | 17,280 cells |
| Slices | 1,920 slices |
| Total RAM Bits | 442,368 bits |
| User I/O | 173 I/O |
| Core Supply Voltage | 1.14 V to 1.26 V |
| Nominal Core Voltage | 1.2 V |
| Speed Grade | -5 |
| Корпус | 256-ball FTFBGA |
| Package Type | Lead-free plastic fine-pitch BGA |
| Тип монтажа | Surface mount |
| Статус RoHS | Compliant |
| Lead-Free Status | Lead-free |
Руководство по цоколевке XC3S1000-5FT256C в корпусе lead-free plastic fine-pitch bga
Цоколевка для XC3S1000-5FT256C (корпус lead-free plastic fine-pitch bga). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для XC3S1000-5FT256C.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
XC3S1000-5FT256C подходит для 6 применениеs: Industrial Control Systems, Telecommunications Interface, Data Acquisition and Instrumentation, Embedded Networking Bridge, Legacy Processor Peripherals, Video Timing and Display Control.
Industrial Control Systems
The XC3S1000-5FT256C fits compact industrial controllers that combine sequencing, data acquisition, and peripheral interfacing in one FPGA. Its 1,920 slices and 442,368 RAM bits can support control state machines, condition monitoring, counters, and local data buffering, while 173 user I/O provide connections to sensors, actuators, relays, and operator interfaces. The -5 grade preserves stronger timing margin than slower Spartan-3 options for synchronous control paths. During implementation, partition memory-heavy logic into dedicated block RAM where possible, keep high-speed paths short, and verify clock-domain crossings before hardware release.
Рекомендуется
Telecommunications Interface
The XC3S1000-5FT256C is appropriate for legacy telecommunications interface cards that require configurable framing, packet buffering, and parallel data processing. Its 17,280 logic cells can implement multiple finite-state machines, while 442,368 RAM bits provide storage for queues, descriptors, and timing patterns. The 173 user I/O allow direct attachment to processors, line codecs, and clock circuitry. Designers should use the -5 grade when timing closure is tighter, account for I/O-standard limits in each bank, and validate every clock-domain crossing with static timing analysis rather than relying on the nominal 1.2 V core description.
Рекомендуется
Data Acquisition and Instrumentation
The XC3S1000-5FT256C can serve as the central programmable element in a data-acquisition or instrumentation design. The 1,920 slices are useful for parallel sampling control, digital filtering, trigger logic, and protocol conversion, while the available RAM can buffer acquired samples before host transfer. With 173 user I/O, the FPGA can connect multiple data buses, capture signals, and generate synchronized control outputs. Designers should assign I/O standards according to voltage and direction constraints, place decoupling close to the FTFBGA power balls, and ensure the acquisition clock has adequate jitter margin before fixing the configuration.
Рекомендуется
Embedded Networking Bridge
The XC3S1000-5FT256C is suitable for protocol bridges and embedded network interfaces that translate between parallel bus structures or implement lightweight packet processing. Its programmable slices can support framing, header inspection, checksum logic, and flow control, while its RAM resources can hold packet windows and descriptors. The 173 I/O are valuable for parallel processor buses, memory interfaces, status LEDs, and management signals. A replacement should preserve the -5 timing grade when the original interface operates close to clock limits. PCB planning must treat the 256-ball package as a demanding fine-pitch BGA and route sensitive interfaces with continuous reference planes and carefully controlled impedance.
Рекомендуется
Legacy Processor Peripherals
The XC3S1000-5FT256C can consolidate programmable peripheral functions that would otherwise occupy several CPLDs and support logic. The 17,280 logic cells are suitable for bus arbiters, FIFO controllers, DMA-style sequencing, and custom register maps, and 442,368 RAM bits can implement deeper local buffers than small CPLDs. Its 173 I/O support several peripheral buses and control signals, subject to voltage and bank restrictions. Maintainability favors preserving the original toolchain settings and bitstream configuration. If a lower-speed grade is used for cost or availability, rerun timing analysis after synthesis because placement changes can expose paths that previously met timing.
Рекомендуется
Video Timing and Display Control
The XC3S1000-5FT256C can be used in display-control and video-timing subsystems that require deterministic pixel generation, synchronization, and programmable test patterns. Its 1,920 slices can implement timing generators, counters, overlays, and interface adapters, while the internal RAM can hold line buffers or test-image parameters. The 173 user I/O support parallel or multiplexed display interfaces, subject to I/O-bank rules. The -5 grade is advantageous for pixel-clock and data-path timing margins. Layout should separate sensitive clock and data nets from aggressive switching logic, and the power system should accommodate the FTFBGA’s distributed power and ground balls without long return-current discontinuities.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для XC3S1000-5FT256C — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | XC3S1000-5FTG256C | XC3S1000-4FT256C | XC3S1000-3FT256C | XC3S1000-2FT256C | XC3S1000-1FT256C |
|---|---|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | 256-ball FTFBGA | 256-ball FTFBGA | 256-ball FTFBGA | 256-ball FTFBGA | 256-ball FTFBGA | 256-ball FTFBGA |
| Speed Grade | -5 | -5 | -4 | -3 | -2 | -1 |
| Logic Cells | 17,280 cells | 17,280 cells | 17,280 cells | 17,280 cells | 17,280 cells | 17,280 cells |
| Total RAM Bits | 442,368 bits | 442,368 bits | 442,368 bits | 442,368 bits | 442,368 bits | 442,368 bits |
| User I/O | 173 I/O | 173 I/O | 173 I/O | 173 I/O | 173 I/O | 173 I/O |
| Programming Tool Compatibility | Xilinx ISE Spartan-3 device flow | Xilinx ISE Spartan-3 device flow | Xilinx ISE Spartan-3 device flow | Xilinx ISE Spartan-3 device flow | Xilinx ISE Spartan-3 device flow | Xilinx ISE Spartan-3 device flow |
Ключевые отличия
- Highest listed performance grade among the compatible Spartan-3 replacements (против XC3S1000-4FT256C)
- Matches the confirmed -5FTG256C resource configuration (против XC3S1000-5FTG256C)
- Retains the full Spartan-3 logic and memory resources across lower-speed drop-in options (против XC3S1000-2FT256C)
Заметки по проектированию
Treat the 256-ball FTFBGA as a demanding fine-pitch BGA rather than a generic QFP footprint. Follow the manufacturer’s ball-pitch, pad, solder-mask, and via-in-pad guidance, and verify the PCB stack-up before release. Distributed power and ground balls must be connected through low-impedance planes, while external decoupling should be placed close to the relevant supply balls. Validate the assembled board with continuity, X-ray inspection, and BGA-specific test coverage because hidden solder defects can affect multiple adjacent balls.
Assign clocks and high-speed interfaces through the device’s supported I/O standards and bank constraints before PCB routing. Maintain continuous reference planes beneath high-speed nets, avoid stubs and unnecessary layer transitions, and apply impedance rules that account for the actual stack-up. For designs using a slower Spartan-3 speed grade, rerun static timing analysis after implementation because placement changes can reduce timing margin even when the logic resources and pin assignments are unchanged.
Do not select a replacement solely from the XC3S1000 base name. Confirm the complete ordering code, FT256C package definition, speed grade, temperature requirements, and target-device setting in the implementation tool. A lower speed grade can meet the board footprint while failing an existing clock constraint. Preserve configuration polarity, startup behavior, and pin constraints when loading a replacement, and compare the generated configuration file with the original design intent before production programming.
Информация о соответствии
The product listing identifies the XC3S1000-5FT256C as RoHS-compliant and lead-free. REACH, halogen-free, conflict-minerals, and automotive qualification status are not stated.