XC3S50-4PQ208C - 50K Gate Spartan-3 FPGA | AMD
Артикул: XC3S50-4PQ208C ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
XC3S50-4PQ208C Обзор
A field-programmable gate array is a semiconductor device whose logic and interconnect resources are configured after fabrication. FPGAs sit above simple fixed-function logic devices in the hardware hierarchy because designers can implement counters, state machines, interfaces, control logic, and signal processing without manufacturing a custom integrated circuit. The Spartan-3 family targets applications where moderate logic density, flexible I/O, and economical implementation are more important than the very high capacity of larger FPGAs.
The XC3S50-4PQ208C provides 50,000 system gates and 1,728 logic cells, while the supplied distributor information reports 124 user I/O pins. Its 73,728 RAM bits can support small internal buffers, lookup-table-based storage, counters, and communication state. The 208-pin PQFP package is a leaded surface-mount package that is easier to inspect and rework than a very fine-pitch BGA, although its 208 leads require a substantially larger board footprint.
The device is associated with 90 nm technology and a 1.2 V supply in the supplied product references. The -4 designation is associated with the device’s speed grade, while the C suffix identifies the commercial temperature/grade coding used by the manufacturer’s ordering system. Exact timing constraints should be taken from the applicable Xilinx Spartan-3 datasheet and the selected design package.
Typical uses include industrial control, instrumentation, communications, embedded systems, consumer electronics, and compact digital logic platforms. The 124 available I/O pins make the device useful when a design requires more external connectivity than a small FPGA package provides. The internal RAM can support protocol state, data buffering, and lookup functions without using external memory when the required storage is small.
Designers should verify the exact pinout, power rails, decoupling requirements, configuration interface, I/O standards, and timing constraints against the official Spartan-3 documentation before layout. The PQFP footprint requires adequate solder mask and paste design around 208 leads, while the FPGA’s configuration pins, clock inputs, and I/O buffers must be planned during schematic capture.
This page consolidates distributor and manufacturer-linked reference information, including logic density, RAM, I/O count, package, voltage, and stated frequency, and provides engineering guidance for selecting and integrating the XC3S50-4PQ208C. Availability, pricing, lifecycle status, and exact electrical limits should be confirmed against the current authorized source data.
Аналоги без доработки для XC3S50-4PQ208C — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с XC3S50-4PQ208C (тот же форм-фактор и посадочное место) — отличается по Device Type, Logic Cells, Process Technology, FPGA Family, Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
XC3S50-5PQG208C
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
XC3S50-4PQG208I
✅ Прямая замена✓ В наличии
$55.85 / шт.
Открыть даташит →XC3S500E-4PQG208C
✅ Прямая замена✓ В наличии
$23.7985 / шт.
Открыть даташит →XC3S50-4TQ144C
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →XC3S50AN-4TQG144I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
XC3S50-4PQ208C Максимальные параметры и электрические характеристики
| Device Type | Field Programmable Gate Array (FPGA) |
| FPGA Family | Spartan-3 |
| System Gates | 50,000 gates |
| Logic Cells | 1,728 logic cells |
| Logic Blocks | 192 logic blocks |
| Total RAM | 73,728 RAM bits |
| User I/O Pins | 124 I/O pins |
| Maximum Stated Frequency | 630 MHz |
| Напряжение питания | 1.2 V |
| Process Technology | 90 nm |
| Корпус | 208-pin PQFP |
| Package Type | 208-BFQFP |
| Lead Count | 208 terminals |
| Тип монтажа | Surface Mount |
| Рабочая температура | 0 °C to +85 °C |
| Programmable Logic | Configurable logic array |
| On-Chip Memory | 73,728 RAM bits |
Руководство по цоколевке XC3S50-4PQ208C в корпусе 208-bfqfp
Цоколевка для XC3S50-4PQ208C (корпус 208-bfqfp). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для XC3S50-4PQ208C.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
XC3S50-4PQ208C подходит для 6 применениеs: Industrial Control Logic, Communications Interface, Embedded Instrumentation, Industrial Data Acquisition, Consumer Electronics Control, Test and Measurement Control.
Industrial Control Logic
The XC3S50-4PQ208C fits industrial control boards that need deterministic programmable logic alongside external sensors, actuators, and communication transceivers. Its 1,728 logic cells can implement sequencing logic, interlocks, timers, and state machines, while 124 user I/O pins provide ample connections for field inputs and outputs. The 73,728 RAM bits can hold local tables or small data buffers without requiring an external memory device for modest workloads. Designers should verify clocking, I/O voltage tolerances, isolation strategy, and industrial temperature requirements in the final design.
Рекомендуется
Communications Interface
The XC3S50-4PQ208C is suitable for custom communication front ends where protocol framing, filtering, buffering, and control must be coordinated tightly. The 50,000-system-gate device provides enough configurable resources for low-to-moderate-speed serial protocols, while the 124 I/O pins support parallel data paths and control signals. The 73,728 RAM bits can support packet buffering, counters, or lookup operations. Use external transceivers for physical-layer signaling and validate timing margins against the selected clock and baud-rate assumptions.
Рекомендуется
Embedded Instrumentation
The XC3S50-4PQ208C can serve as the programmable control fabric in compact instrumentation systems where measurement control, calibration tables, status reporting, and local processing are required. Its 1,728 logic cells are suitable for control sequencing and digital filtering, and its 73,728 RAM bits provide local storage for calibration or sample data. The 208-pin PQFP package exposes a large I/O count for sensor conditioning, ADC interfaces, displays, and service connectors. Analog accuracy and safety margins still depend on external signal-conditioning components and system-level validation.
Рекомендуется
Industrial Data Acquisition
The XC3S50-4PQ208C is appropriate for data-acquisition front ends that must coordinate multiple converter channels, digital filtering, sample counters, and control outputs. The 124 user I/O pins allow parallel converter data and control signals to be connected without multiplexing, while the FPGA’s RAM can implement short buffering stages. A practical design should establish the sampling clock, define acquisition timing, and keep high-speed signal routing away from sensitive control paths. External ADC and interface components remain necessary because the FPGA is a programmable logic device, not a data converter.
Рекомендуется
Consumer Electronics Control
The XC3S50-4PQ208C can be used in programmable control and user-interface logic for compact consumer products where a microcontroller alone would be insufficient or where deterministic hardware timing is valuable. Its 1,728 logic cells and 73,728 RAM bits can implement display sequencing, key scanning, motor-control timing, or custom peripheral logic. The 124 I/O pins provide broad connectivity for buttons, indicators, displays, and external controllers. Validate ESD, power sequencing, connector protection, and production-test requirements before using the device in a consumer product.
Рекомендуется
Test and Measurement Control
The XC3S50-4PQ208C is useful for instrument-control boards that coordinate sequencing, digital limits, timing, data routing, and external interface adapters. Its moderate logic density is suitable for a control plane, while 124 I/O pins allow flexible connection to converters, relays, displays, and communication interfaces. The internal RAM can support measurement tables, counters, and temporary control data. Because measurement accuracy depends on analog circuitry, clock quality, isolation, and calibration, the FPGA should be treated as the deterministic digital-control portion of the instrument rather than as a replacement for analog front ends.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для XC3S50-4PQ208C — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | XC3S50-5PQG208C | XC3S50-4PQG208I | XC3S500E-4PQG208C | XC3S50-4TQ144C | XC3S50AN-4TQG144I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 208-pin PQFP | 208-pin PQFP | 208-pin PQFP | 208-pin PQFP | 144-pin TQFP | 144-pin TQFP |
Ключевые отличия
- Moderate Spartan-3 logic density with substantial I/O availability (против XC3S50-5PQG208C)
- 124 user I/O pins support wider external connectivity (против XC3S50-4TQ144C)
- Internal RAM supports local buffering and control tables (против XC3S50-5PQG208C)
Заметки по проектированию
The 208-lead PQFP footprint is mechanically and electrically different from a QFP symbol with a different lead count or pitch. Use the AMD package drawing to define pad length, pad width, row spacing, solder-mask clearance, and paste volume. Keep configuration and clock pins accessible for programming and validation, and route high-speed or sensitive signals away from noisy switching supplies and power inductors.
The supplied references identify a 1.2 V FPGA supply, but they do not provide the complete core, auxiliary, and I/O power budget. Before layout, obtain the official Spartan-3 power table and separate supplies where required. Place bypass capacitors close to the relevant power pins, use a low-impedance ground plane, and verify startup sequencing, rail tolerances, current transients, and regulator stability in the final system.
Do not treat the 630 MHz figure as a guaranteed operating frequency for every XC3S50 design. Timing performance depends on the selected speed-grade interpretation, clock topology, I/O standard, routing path, loading, and tool version. Confirm the device identifier and package suffix against the AMD ordering guide, and generate the final bitstream with a tool release that explicitly supports the Spartan-3 device.
Reserve clean routing for clock inputs and any high-speed interface signals. Keep FPGA power distribution and decoupling paths short, provide a continuous ground reference, and separate noisy switching-regulator paths from sensitive analog or communication sections. The 124 I/O pins are useful for external connectivity, but every assigned signal still requires voltage-tolerance and I/O-standard verification.
Информация о соответствии
The retrieved search snippets identify the part as lead-free in one distributor description, but no formal manufacturer compliance declarations were provided. RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 status remain unknown except that automotive qualification is not indicated.
