XC3S50AN-4FT256I - 1584 Logic Cells Spartan-3AN | AMD
Артикул: XC3S50AN-4FT256I ✓ АктивенXC3S50AN-4FT256I Обзор
A field-programmable gate array, or FPGA, is a programmable semiconductor whose configurable logic blocks, block RAM, programmable input/output resources, and dedicated hardware blocks can be assembled into application-specific digital circuits. FPGAs sit between fixed-function logic devices and software processors within the broader semiconductor hierarchy. They are useful when a design needs parallel processing, deterministic hardware response, flexible interface support, or field updates without changing the printed circuit board.
The XC3S50AN provides 176 configurable logic blocks, 1,584 logic cells, and 55,296 bits of block RAM. Its 195 programmable I/O pins support connections to external memories, processors, sensors, communications circuits, and industrial control peripherals. The four speed designation supports designs that require more timing margin than a lower-speed grade, while the industrial temperature suffix identifies its intended -40°C to +100°C junction-temperature operating class.
This Spartan-3AN device uses a 90 nm FPGA process and a 1.2 V core supply. These characteristics place it among Xilinx and AMD’s low-density Spartan devices, where configuration flexibility is balanced against relatively modest logic capacity. Design teams should evaluate the available logic, RAM, and I/O resources against the target design rather than relying on nominal gate counts alone.
Typical applications include industrial control, data acquisition, embedded communications, instrumentation, embedded processing, and low-density interface or control logic. The 195 available I/O pins are especially useful when the board must connect directly to multiple sensors, memory devices, transceivers, or mixed-signal peripheral circuits while preserving programmable logic for timing and control functions.
Use the manufacturer pinout and configuration guidance when assigning the 256-ball footprint. Confirm every power, ground, configuration, clock, and user-I/O connection against DS557, and budget startup configuration time and core supply requirements in the system power sequence. The legacy device also requires an appropriate Xilinx development environment and device support for implementation, simulation, and programming.
This page combines device specifications, verified package details, application guidance, replacement analysis, and practical implementation considerations in one engineering-focused reference. It is intended to help designers assess logic capacity, timing class, thermal range, package compatibility, tool-chain availability, and sourcing constraints before integrating the FPGA into a new or existing platform.
Аналоги без доработки для XC3S50AN-4FT256I — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с XC3S50AN-4FT256I (тот же форм-фактор и посадочное место) — отличается по Device Type, Package, Logic Cells, User I/O.
XC3S50AN-4FT256C
✅ Прямая заменаУточнить цену
Открыть даташит →XC3S50AN-5FT256C
✅ Прямая заменаУточнить цену
Открыть даташит →XC3S50AN-5FT256I
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
XC3S50AN-4FTG256I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
XC3S50A-4FT256I
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →XC3S50AN-4FT256I Максимальные параметры и электрические характеристики
| Device Type | Spartan-3AN FPGA |
| Logic Cells | 1,584 cells |
| Configurable Logic Blocks | 176 CLBs |
| Total RAM Bits | 55,296 bits |
| Programmable I/O Pins | 195 pins |
| Nominal Gate Count | 50,000 gates |
| Максимальная тактовая частота | 667 MHz |
| Core Supply Voltage | 1.2 V |
| Fabrication Technology | 90 nm |
| Temperature Grade | Industrial |
| Junction Temperature Range | -40°C to +100°C |
| Корпус | 256-LBGA |
| Package Code | FT256 |
| Package Body Shape | Square |
| Terminal Type | Ball |
| Terminal Count | 256 terminals |
| Тип монтажа | Surface mount |
Руководство по цоколевке XC3S50AN-4FT256I в корпусе square
Цоколевка для XC3S50AN-4FT256I (корпус square). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для XC3S50AN-4FT256I.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
XC3S50AN-4FT256I подходит для 6 применениеs: Industrial Control and Automation, Data Acquisition and Instrumentation, Embedded Communications Interface, Sensor Aggregation and Edge Logic, LED Display and Video Timing, Aerospace and Defense Support Logic.
Industrial Control and Automation
The XC3S50AN-4FT256I suits compact industrial controllers that coordinate sensors, actuators, interlocks, and sequencing logic without relying on a separate processor for every function. Its 176 configurable logic blocks and 195 programmable I/O pins provide ample parallel interface capacity, while the listed 667 MHz maximum clock supports demanding timing paths. The -40°C to +100°C industrial junction-temperature range also aligns with factory equipment that must tolerate extended ambient conditions. Place the FPGA beside the controlled power rails and use the AMD Spartan-3AN development flow to implement protection logic, state machines, counters, and communication framing.
Рекомендуется
Data Acquisition and Instrumentation
The XC3S50AN-4FT256I can implement parallel acquisition pipelines, trigger logic, digital filtering, calibration tables, and data packing in a single programmable device. Its 55,296 RAM bits provide useful buffer storage, while 195 I/O pins allow direct connection to multiplexers, counters, converters, and communication transceivers. The four-speed device and 667 MHz listed maximum clock are suitable for timing-critical sampling systems, subject to the actual implemented clock topology and I/O standards. Designers should use the pinout in DS557 to assign dedicated clock inputs and then validate acquisition timing through implementation-level static timing analysis.
Рекомендуется
Embedded Communications Interface
The XC3S50AN-4FT256I is appropriate for protocol adapters, telemetry framing, UART bridges, and industrial communication front ends requiring programmable parallel logic. Its 195 I/O pins allow multiple buses and status signals to be consolidated, and its 55,296 RAM bits can support packet buffering or channel multiplexing. The listed 1.2 V core operation requires a clean supply arrangement, while I/O voltage requirements depend on the selected banks and external interface standards. Engineers should define timing constraints for each clocked interface, reserve configuration pins correctly, and confirm that the selected FT256 ball mapping matches the board revision before release.
Рекомендуется
Sensor Aggregation and Edge Logic
The XC3S50AN-4FT256I can consolidate multiple digital sensors, condition their signals, perform thresholding, and format results for a host processor. Its 195 programmable I/O pins allow parallel sensor inputs, interrupt lines, and bus resources to coexist without fixed pin multiplexing. The 55,296 RAM bits support short histories, event buffers, or time-domain records, while the listed 667 MHz maximum clock allows parallel processing at high clock rates. For IoT and edge equipment, use the industrial temperature option only when the assembly environment requires it, and design input conditioning or level translation separately where sensor voltages differ from the FPGA I/O banks.
Рекомендуется
LED Display and Video Timing
The XC3S50AN-4FT256I can generate timing signals, pixel processing, refresh control, and synchronization logic for compact display or video-timing subsystems. Its 195 I/O pins are useful when multiple data lanes and control signals must be routed to external display converters, and the 55,296 RAM bits can hold scan-line or frame buffers. The listed 667 MHz maximum clock provides timing margin for parallel pixel logic, although actual video timing must be constrained against the selected I/O standards and board-level skew. Use dedicated clock-capable pins where possible and simulate the complete display timing before programming production hardware.
Рекомендуется
Aerospace and Defense Support Logic
The XC3S50AN-4FT256I can be evaluated for modular control, telemetry, instrumentation, and fault-logging functions where configurable logic and compact integration are valuable. Its 176 configurable logic blocks, 55,296 RAM bits, and 195 I/O pins support parallel decision logic and multiple interface channels, while the industrial temperature range covers many ground-based or controlled-environment systems. The 90 nm process and mature Spartan-3AN architecture should be checked against the required radiation, qualification, security, and long-term availability program. Do not infer aerospace qualification from the industrial suffix; obtain program-specific documentation and complete the required environmental and reliability verification.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для XC3S50AN-4FT256I — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | XC3S50AN-4FT256C | XC3S50AN-5FT256C | XC3S50AN-5FT256I | XC3S50AN-4FTG256I | XC3S50A-4FT256I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 256-LBGA (FT256) | 256-LBGA (FT256) | 256-LBGA (FT256) | 256-LBGA (FT256) | 256-LBGA (FTG256) | 256-LBGA (FT256) |
| FPGA Family | Spartan-3AN | Spartan-3AN | Spartan-3AN | Spartan-3AN | Spartan-3AN | Spartan-3A |
| Speed Designation | 4 | 4 | 5 | 5 | 4 | 4 |
| Temperature Grade | Industrial | Commercial | Commercial | Industrial | Industrial | Industrial |
Ключевые отличия
- Maintains the Spartan-3AN resource configuration in a footprint-compatible option (против XC3S50A-4FT256I)
- Offers a same-speed commercial-temperature alternative (против XC3S50AN-4FT256C)
- Provides a same-package faster grade for timing margin (против XC3S50AN-5FT256C)
- Combines industrial temperature capability with a faster same-family grade (против XC3S50AN-4FT256C)
Заметки по проектированию
Budget the 1.2 V core rail separately from every I/O bank because the required I/O voltage can differ from the core voltage. Place the regulator close to the FPGA and follow the decoupling network specified in DS557 rather than substituting generic capacitor values. Confirm the source current against the estimated logic activity and configuration state, then verify sequencing so that every required supply rail meets its ramp and monotonicity condition before configuration begins.
Use the complete FT256 ball assignment from the Spartan-3AN pinout when defining the land pattern, including power, ground, configuration, clock-capable, and user-I/O balls. Keep configuration-mode and startup behavior compatible with the board-level programming connector. Because a 256-ball BGA hides routing errors, inspect the Gerber stack-up, ball numbering orientation, solder mask, and paste layers against the package drawing before fabrication.
Estimated thermal requirements must be calculated from actual core power, I/O power, ambient temperature, board copper area, airflow, and the package thermal model. The industrial device has a 100°C upper junction-temperature limit, so design the board to keep the junction below that boundary across worst-case operating conditions. Use a spread of copper beneath the BGA where the package design permits it and avoid placing heat-generating components immediately below the device.
Do not assume that identical package codes guarantee a drop-in upgrade across Spartan families. The XC3S50A and XC3S50AN families share a nominal 50,000-gate class but can differ in resource details, configuration behavior, and device-specific constraints. Also do not substitute speed or temperature suffixes without reviewing timing and environmental requirements. Generate a fresh bitstream, rerun implementation and static timing analysis, and test configuration on the target board after any MPN change.
Assign high-fanout clocks and source-synchronous interfaces with deliberate constraints, preferably using dedicated clock-capable pins. For external memory or high-speed parallel buses, account for package and board skew in the timing budget and keep clock and data routing topology consistent. If the design uses differential or high-speed I/O, confirm the selected bank voltage and compliance with the relevant interface standard before assigning pins.
Информация о соответствии
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact order code. Confirm current environmental and quality documentation with AMD through the Request a Quote form.