XC5VFX70T-1FFG665I - Virtex-5 FXT FPGA | Xilinx
Артикул: XC5VFX70T-1FFG665I ✓ АктивенXC5VFX70T-1FFG665I Обзор
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic can be configured after manufacture. FPGAs occupy the programmable-logic and FPGA-and-CPLD portion of the integrated-circuit hierarchy. Unlike fixed-function devices, an FPGA combines configurable logic blocks with hard processors, memory, multipliers, clock resources, and high-speed I/O, allowing one package to support multiple product functions through configuration data.
The Virtex-5 FXT architecture provides 6,080 logic blocks and 71,680 logic cells, with a listed internal frequency of 1,098 MHz. Its 360 I/Os support external connectivity, while dedicated hard resources include DSP slices, block RAM, ChipSync source-synchronous interfaces, digitally controlled impedance, and system-monitoring functions. These resources make the device suitable for parallel processing, protocol bridging, video, communications, and embedded control.
The XC5VFX70T-1FFG665I uses a 65 nm CMOS process and a nominal 1 V operating supply. Its large 665-pin FCBGA lands provide extensive I/O capacity but require a dense, controlled-geometry PCB layout and careful power, ground, and escape-routing design. Configuration and programming tools must match the selected Virtex-5 device and bitstream architecture, making part-number and package verification essential before PCB release.
Typical applications include high-speed signal processing, industrial imaging, network packet processing, storage interfaces, test and measurement equipment, embedded communications, and video infrastructure. In these systems, the FPGA can absorb parallel algorithms, interface multiple buses, and implement time-critical control without requiring a large collection of discrete programmable and support devices.
Before layout, verify the exact 665-pin package drawing, exposed-pad requirements, pin assignments, and board-level power design using the AMD Virtex-5 package pinout files. Treat the large BGA as a high-pin-count routing task, preserve layer-transition symmetry, and validate signal integrity and power integrity with the complete interface and configuration design.
This page combines manufacturer-oriented device facts, package and cross-reference information, drop-in configuration alternatives, application guidance, and design-focused comparison points. It also distinguishes documented interchangeable configurations from larger-package devices that cannot replace this part without a PCB redesign.
Аналоги без доработки для XC5VFX70T-1FFG665I — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с XC5VFX70T-1FFG665I (тот же форм-фактор и посадочное место) — отличается по Package Type, Device Type, Package, Speed Grade, Package Dimensions.
XC5VFX70T-1FF665I
✅ Прямая заменаУточнить цену
Открыть даташит →XC5VFX70T-1FFG665CES
✅ Прямая заменаУточнить цену
Открыть даташит →XC5VFX70T-1FFG665CES
✅ Прямая заменаУточнить цену
Открыть даташит →XC5VFX70T-1FFG665I Максимальные параметры и электрические характеристики
| Device Type | Virtex-5 FXT field-programmable gate array |
| Logic Cells | 71,680 cells |
| Logic Blocks | 6,080 blocks |
| I/O Count | 360 I/Os |
| Корпус | 665-pin FCBGA |
| Package Dimensions | 27 x 27 mm |
| Process Technology | 65 nm CMOS |
| Core Supply Voltage | 1 V nominal |
| Рабочее напряжение питания | 0.95 V to 1.05 V |
| Internal Frequency | 1,098 MHz |
| Рабочая температура | 0 °C to 85 °C |
| Junction Temperature | -40 °C to 100 °C |
| Logic Family | CMOS |
| Architecture | Virtex-5 FXT |
| Block RAM | 36 Kbit block RAM/FIFO per dedicated block |
| DSP Resource | Second-generation 25 x 18 DSP slices |
| I/O Technology | SelectIO with digitally controlled impedance |
| Synchronization Technology | ChipSync source-synchronous interface |
| System Features | System monitor functionality |
Руководство по цоколевке XC5VFX70T-1FFG665I в корпусе 27 x 27 mm
Цоколевка для XC5VFX70T-1FFG665I (корпус 27 x 27 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для XC5VFX70T-1FFG665I.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
XC5VFX70T-1FFG665I подходит для 6 применениеs: Industrial Image Processing, High-Speed Network Packet Processing, Video Processing Infrastructure, Storage and Interface Bridging, Test and Measurement Equipment, Embedded Communications Equipment.
Industrial Image Processing
The XC5VFX70T-1FFG665I fits industrial imaging because its 71,680 logic cells and 6,080 logic blocks can host parallel pixel pipelines while the 360 I/Os connect image sensors, converters, and memory. Dedicated 25 x 18 DSP slices accelerate multiply and accumulate operations, and 36 Kbit block RAM/FIFO blocks support line buffers and staged filtering. The 1 V core operating range centers design power budgets around 0.95 V to 1.05 V. Use the 665-pin FCBGA only after confirming that the board supports its escape-routing density, power plane structure, and thermal requirements.
Рекомендуется
High-Speed Network Packet Processing
The XC5VFX70T-1FFG665I supports network packet processing by combining substantial programmable logic with 360 SelectIO-capable user I/Os and dedicated source-synchronous interface resources. Its 71,680 logic cells can implement headers, lookup tables, queues, and traffic control, while DSP slices can accelerate classification or filtering functions. The 1,098 MHz listed internal frequency provides a high clocking reference, although achievable line rate depends on the selected I/O standard, board-level signal integrity, memory architecture, and timing constraints. Validate every high-speed interface with the complete pinout and timing design.
Рекомендуется
Video Processing Infrastructure
The XC5VFX70T-1FFG665I is suitable for video infrastructure requiring parallel pixel, raster, or frame-processing logic in a single programmable device. Its 71,680 logic cells and 360 I/Os allow wide parallel data paths, while DSP slices support filtering and arithmetic stages and block RAM/FIFOs can organize line or frame data. The 0.95 V to 1.05 V core range simplifies comparison with 1 V-class Virtex-5 designs, but it does not eliminate external interface power or I/O-standard constraints. Select compatible memory and transceiver interfaces based on timing, bandwidth, and board-level reach.
Рекомендуется
Storage and Interface Bridging
The XC5VFX70T-1FFG665I can consolidate storage, bus, and protocol conversion logic because 6,080 logic blocks and 360 I/Os provide substantial parallel connectivity. Programmable FIFOs and 36 Kbit block RAM resources can buffer data between clock domains, while DSP slices support integrity operations or other arithmetic-heavy stages. Its 1 V nominal core supply matches the power architecture of the Virtex-5 FXT generation. The primary engineering trade-off is PCB complexity: a 665-pin FCBGA demands dense escape routing, uninterrupted supply planes, and careful thermal design rather than simple point-to-point board routing.
Рекомендуется
Test and Measurement Equipment
The XC5VFX70T-1FFG665I is appropriate for test and measurement systems that need programmable logic, high-speed acquisition paths, real-time filtering, and extensive interface control in one device. The 25 x 18 DSP slices can implement parallel filters and transform stages, while the 6,080 logic blocks accommodate control logic, state machines, and data movement. Its 360 I/Os provide connection points for converters, trigger systems, memories, and communication ports. Because internal frequency does not by itself establish acquisition bandwidth, qualify the complete signal path with target I/O standards, timing constraints, PCB loss, and synchronization requirements.
Рекомендуется
Embedded Communications Equipment
The XC5VFX70T-1FFG665I fits embedded communications equipment that combines protocol termination, buffer management, data-rate conversion, and real-time control. Its 71,680 logic cells and dedicated block RAM/FIFO resources allow multiple buffered channels to coexist, while SelectIO and ChipSync resources support source-synchronous communication paths. The 1,098 MHz listed internal frequency supports demanding logic timing, but external performance depends on I/O standards and board-level integrity. Plan power delivery around the 0.95 V to 1.05 V core range and use the official 665-pin package data to avoid conflicts between supply pins, high-speed interfaces, and configuration functions.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для XC5VFX70T-1FFG665I — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | XC5VFX70T-1FF665I | XC5VFX70T-1FFG665C | XC5VFX70T-1FFG665CES |
|---|---|---|---|---|
| Package | 665-pin FCBGA | 665-pin FCBGA | 665-pin FCBGA | 665-pin FCBGA |
| Brand | Xilinx | Xilinx | Xilinx | Xilinx |
| FPGA Family | Virtex-5 FXT | Virtex-5 FXT | Virtex-5 FXT | Virtex-5 FXT |
| Logic Cells | 71,680 cells | 71,680 cells | 71,680 cells | 71,680 cells |
| Logic Blocks | 6,080 blocks | 6,080 blocks | 6,080 blocks | 6,080 blocks |
| User I/O | 360 I/Os | 360 I/Os | 360 I/Os | 360 I/Os |
| Core Supply | 1 V nominal; 0.95 V to 1.05 V operating range | 1 V nominal; 0.95 V to 1.05 V operating range | 1 V nominal; 0.95 V to 1.05 V operating range | 1 V nominal; 0.95 V to 1.05 V operating range |
| Process Technology | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS |
| Special Features | DSP slices, block RAM, SelectIO, ChipSync, system monitor | Virtex-5 FXT hard resources | Virtex-5 FXT hard resources | Virtex-5 FXT hard resources |
Ключевые отличия
- Maintains the same 665-pin device footprint while changing only the documented ordering designation (против XC5VFX70T-1FF665I)
- Offers an industrial-temperature ordering option with the same core device resources (против XC5VFX70T-1FFG665C)
- Provides an ES-labeled 665-FCBGA configuration without changing the fundamental device architecture (против XC5VFX70T-1FFG665CES)
Заметки по проектированию
Treat the 665-pin FCBGA as a dense-routing and power-integrity design. Use the official AMD Virtex-5 package pinout files to define every ball, including power, ground, configuration, and exposed-pad connections. Keep the core supply within 0.95 V to 1.05 V, provide low-impedance supply and ground planes, and minimize layer transitions beneath the device. Validate escape-routing geometry, via current capacity, and simultaneous-switching noise against the selected I/O assignments before releasing fabrication data.
Decouple each applicable power rail at the device and preserve a low-inductance return path to the supply source. The 1 V nominal core voltage leaves limited tolerance for routing loss or transient droop, especially when the 360 I/Os toggle simultaneously. Place the smallest suitable high-frequency capacitors directly at the relevant package balls, add bulk capacitance near the regulator, and verify startup sequencing, load-transient response, and rail noise in simulation. Use the manufacturer's pinout and power-design guidance for the final capacitor values.
Do not infer board-level performance from the listed 1,098 MHz internal frequency alone. External interface rates depend on the selected SelectIO standard, clock topology, package escape routes, PCB material, receiver loading, and equalization strategy. Develop source-synchronous interfaces around the ChipSync resources, use the official timing constraints, and simulate eye masks and skew at the connector or memory device. Maintain continuous reference planes and avoid stubs on high-speed nets.
Estimate junction temperature from total FPGA and I/O dissipation, the package thermal model, ambient conditions, board construction, and airflow before selecting the PCB and enclosure. A large FCBGA can distribute heat well, but its performance also depends on the available copper area, thermal-via pattern, and whether the exposed pad is connected according to the package drawing. Do not reuse a thermal estimate from a smaller FPGA package; validate the final assembly at the intended clock activity and environmental temperature.
Информация о соответствии
The G suffix identifies the lead-free-marked ordering option. RoHS, REACH, halogen-free, and conflict-minerals status require confirmation from current AMD documentation or the supplier's material declaration.