XC7A200T-1FBG676C - 215K-L Cell Artix-7 FPGA | AMD
Артикул: XC7A200T-1FBG676C ✓ АктивенXC7A200T-1FBG676C Обзор
An FPGA is a reconfigurable semiconductor in the programmable-logic hierarchy of digital semiconductors. Its configurable lookup tables, routing network, block RAM, programmable I/O, DSP resources, and dedicated clocking fabric allow one physical device to implement multiple digital functions. Vivado Design Suite and standard FPGA development tools configure the architecture and connect external processors, memory, transceivers, sensors, and industrial interfaces. Artix-7 combines substantial programmable logic with low-power, cost-sensitive operation.
The XC7A200T provides 215,360 logic cells and 740 DSP slices, making it suitable for demanding parallel-processing and signal-processing designs. Its 13,140 Kb of block RAM supports buffering, packet storage, data acquisition, and general-purpose compute. The 400-I/O interface increases connectivity to external memory, control processors, transceivers, and high-speed peripherals, while the -1 speed grade provides a defined performance and thermal operating point for commercial systems.
The 676-pin FCBGA package creates a dense but demanding board-level implementation. Power delivery must cover multiple supply rails, and proper decoupling, via distribution, and thermal management are necessary to preserve signal integrity and performance. Its 27 mm by 27 mm land pattern requires careful escape routing, whereas its large I/O count provides more flexibility than smaller Artix-7 packages. Configuration, clocking, and JTAG access remain essential elements of the complete design.
Typical applications include industrial vision, network and communications equipment, instrumentation, embedded signal processing, control systems, and high-throughput digital logic. The 740 DSP slices are especially valuable for filtering, fixed-point arithmetic, and parallel algorithms. The 400 I/Os can connect external memory and multiple peripherals, although high-speed interfaces still require careful board-level timing and impedance-control techniques.
The main engineering trade-off is package density. FBG676 offers extensive I/O and programmable resources but requires a fine-pitch PCB, a large exposed thermal solution, and meticulous power-plane design. Choose it when 400 I/O, 13,140 Kb of block RAM, and 740 DSP slices are required; select a smaller Artix-7 package when lower I/O count, easier routing, or lower board complexity is sufficient.
This product analysis consolidates device capacity, package details, drop-in suffix alternatives, and practical FPGA design guidance into an engineering-focused reference. It also distinguishes the XC7A200T-1FBG676C from faster, industrial-temperature, and lower-power variants that share the FBG676 footprint.
Аналоги без доработки для XC7A200T-1FBG676C — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с XC7A200T-1FBG676C (тот же форм-фактор и посадочное место) — отличается по Package, Block RAM, Operating Temperature, Logic Cells, Process Technology.
XC7A200T-2FBG676C
✅ Прямая замена✓ В наличии
$550 / шт.
Открыть даташит →XC7A200T-1FBG676I
✅ Прямая замена✓ В наличии
$390 / шт.
Открыть даташит →XC7A200T-2FBG676I
✅ Прямая замена✓ В наличии
$100 / шт.
Открыть даташит →XC7A200T-L1FBG676I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
XC7A200T-L2FBG676E
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
XC7A200T-1FBG676C Максимальные параметры и электрические характеристики
| Device Type | Artix-7 Field-Programmable Gate Array (FPGA) |
| Logic Cells | 215,360 cells |
| Block RAM | 13,140 Kb |
| DSP Slices | 740 slices |
| Input/Output Count | 400 inputs and 400 outputs |
| Terminal Count | 676 terminals |
| Корпус | 676-pin FCBGA (FBG676) |
| Package Dimensions | 27 mm x 27 mm |
| Process Technology | 28 nm |
| Supply Voltage Range | 0.95 V to 1.05 V |
| Speed Grade | -1 |
| Диапазон рабочих температур | 0°C to 85°C |
| Maximum Frequency | 1098 MHz |
| Technology | CMOS |
| Тип монтажа | Surface Mount |
| Logic Cell Count | 215,360 logic cells |
| Programmable I/O | 400 I/Os |
Руководство по цоколевке XC7A200T-1FBG676C в корпусе 27 mm x 27 mm
Цоколевка для XC7A200T-1FBG676C (корпус 27 mm x 27 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для XC7A200T-1FBG676C.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
XC7A200T-1FBG676C подходит для 6 применениеs: Industrial Machine Vision, Industrial Networking Equipment, Digital Signal Processing, Data Acquisition Systems, Test and Measurement Instruments, Embedded Control Systems.
Industrial Machine Vision
The XC7A200T-1FBG676C suits machine-vision controllers that must combine parallel image processing with extensive external connectivity. Its 740 DSP slices can accelerate filtering and pixel arithmetic, while 215,360 logic cells support control pipelines, image preprocessing, and protocol conversion. The 400 I/Os provide connections for camera interfaces, image sensors, DDR memory, and digital peripherals. In a production design, engineers should use the FBG676 power and thermal data to establish an exposed-pad cooling strategy and should validate high-speed sensor traces against the implemented board stack-up.
Рекомендуется
Industrial Networking Equipment
The XC7A200T-1FBG676C is appropriate for network-interface, protocol-bridging, and traffic-processing equipment requiring substantial parallel logic and configurable I/O. Its 215,360 logic cells can implement multiple packet-processing pipelines, while 400 I/Os support external PHY, processor, and memory interfaces. The -1 commercial speed grade suits controlled-temperature industrial products operating from 0°C to 85°C. A practical implementation must reserve enough board-routing capacity for the dense FBG676 footprint and should use the AMD pinout files to confirm every bank assignment and power connection.
Рекомендуется
Digital Signal Processing
With 740 DSP slices, the XC7A200T-1FBG676C provides parallel arithmetic resources for filtering, modulation, waveform analysis, and fixed-point signal processing. The 13,140 Kb of block RAM supports sample buffers, correlation storage, and multiply-accumulate pipelines, while 400 I/Os allow high-throughput data to move between converters, memory, and downstream processing logic. The reported maximum frequency of 1098 MHz indicates the device’s high-performance fabric, but real throughput depends on the selected architecture, clocking, memory interface, and timing constraints. Vivado timing analysis should therefore be part of every performance claim.
Рекомендуется
Data Acquisition Systems
The XC7A200T-1FBG676C can serve as the central controller in a high-channel-count data-acquisition system by combining parallel sampling logic with substantial on-chip memory. Its 400 programmable I/Os simplify connections among ADCs, digital sensors, timing devices, and storage controllers, while 13,140 Kb of block RAM can buffer acquired frames or packetized data. The 676-pin FCBGA package requires careful separation of sensitive analog and high-speed digital regions on the PCB. Power sequencing and decoupling should follow the package-specific requirements rather than relying only on the general 0.95 V to 1.05 V device voltage range.
Рекомендуется
Test and Measurement Instruments
The XC7A200T-1FBG676C is well suited to programmable measurement instruments that combine acquisition, sequencing, calibration, and real-time analysis. Its 215,360 logic cells can implement timing engines and digital test sequences, 740 DSP slices can perform filtering or correction, and 400 I/Os provide broad instrument connectivity. The -1 commercial grade supports products intended for a 0°C to 85°C environment. For laboratory instruments, preserve analog isolation, use controlled clock distribution, and derive every I/O standard from the package pinout and bank-voltage tables to prevent incorrect signal conditioning.
Рекомендуется
Embedded Control Systems
The XC7A200T-1FBG676C can implement complex embedded-control logic where deterministic parallel operations and numerous peripheral connections matter more than minimizing device cost. Its programmable resources support motion control, multi-axis sequencing, custom communication protocols, and real-time state machines, while the large I/O count reduces the need for external glue logic. The 28 nm Artix-7 implementation also provides a practical balance of performance, programmability, and system complexity. Production designs should perform thermal testing with the intended enclosure because the dense FCBGA package can shift junction temperature under sustained switching activity.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для XC7A200T-1FBG676C — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | XC7A200T-2FBG676C | XC7A200T-1FBG676I | XC7A200T-2FBG676I | XC7A200T-L1FBG676I | XC7A200T-L2FBG676E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-pin FCBGA (FBG676) | 676-pin FCBGA (FBG676) | 676-pin FCBGA (FBG676) | 676-pin FCBGA (FBG676) | 676-pin FCBGA (FBG676) | 676-pin FCBGA (FBG676) |
| Speed Grade | -1 | -2 | -1 | -2 | -1 | -2 |
| Power Option | Standard | Standard | Standard | Standard | Lower-power L1 option | Lower-power L2 option |
Ключевые отличия
- Large Artix-7 resource allocation in a 676-ball package (против XC7A100T-1FGG484C)
- Commercial-temperature alternative with the same speed grade (против XC7A200T-1FBG676I)
- Direct speed-grade upgrade without changing the FBG676 footprint (против XC7A200T-2FBG676C)
- Lower-power ordering choice for power-sensitive designs (против XC7A200T-L1FBG676I)
Заметки по проектированию
The 676-terminal FCBGA concentrates a large number of high-speed signals around a limited package area, making board thermal design essential. Provide continuous copper beneath the device and couple it to the enclosure or heat spreader according to the AMD package drawing. Validate the finished assembly at the highest expected ambient temperature and workload. The published 0°C to 85°C operating range identifies environmental capability but does not establish that a specific PCB, enclosure, and airflow arrangement will keep the junction within limits.
Decouple each FPGA supply rail directly at the package with the capacitance and placement specified in the AMD Artix-7 power guidance. Keep high-current paths short, use adequate via arrays where planes transition to BGA pads, and separate noisy or switching supplies from sensitive core rails. The stated 0.95 V to 1.05 V range is not a substitute for the exact voltage, tolerance, sequencing, and current requirements in the device documentation. Measure ripple and startup behavior on production-intent hardware before releasing the design.
The FBG676 footprint requires escape routing from a dense fine-pitch ball array, so confirm the PCB line width, spacing, solder mask, and paste pattern against the official AMD package drawing. Preserve access to configuration pins and JTAG, and avoid long stubs beneath the device. Because the package offers 400 I/Os, assign interfaces according to bank constraints early in the architecture phase; late bank changes can force layer reassignment, impedance revisions, and unnecessary respins.
Route high-speed interfaces over continuous reference planes and derive I/O standards from the correct bank supply. Use source-synchronous or board-compensated clocking where required, and model edge rates rather than relying only on target clock frequency. External memory interfaces on a 676-pin device can be particularly sensitive to via stubs and layer transitions. Vivado timing analysis, PCB constraints, and post-layout simulation should be combined so that logical timing and physical signal-integrity assumptions remain consistent.
Do not treat a suffix change as automatically interchangeable. The -2 speed grade can alter timing closure and power, the I suffix changes temperature capability, and the L-prefixed options change the power profile. Although the listed alternatives share the FBG676 package, each should be selected in Vivado as its exact device part number, recompiled, and checked for configuration, I/O standards, timing, and thermal compliance. Avoid confusing FBG676 with FGG676 or other 676-terminal packages whose ball maps differ.
Информация о соответствии
The product listings compare RoHS and REACH attributes for some ordering variants, but a definitive compliance declaration for XC7A200T-1FBG676C was not established from the cited sources. Automotive qualification is also not established by the ordering code.