XC7A50T-L1CPG236I - 52K Logic Cells Artix-7 FPGA | AMD
Артикул: XC7A50T-L1CPG236I ✓ АктивенXC7A50T-L1CPG236I Обзор
A field-programmable gate array is a programmable logic device whose configuration memory defines the digital circuit implemented after power-up. The Artix-7 family combines programmable logic blocks, DSP slices, block RAM, clock-management resources, and high-speed I/O in a single device. The XC7A50T-L1CPG236I is positioned for cost-sensitive applications that require more logic capacity than small FPGAs while avoiding the power and complexity of larger adaptive-computing devices.
Key device characteristics include 52,160 logic cells, 106 user I/O, 28 nm process technology, a 236-pin CSBGA package, and a listed 0.95 V core voltage. The device also includes Artix-7 clock-management and programmable-logic resources suitable for control logic, interface bridging, sensor aggregation, and parallel-to-serial data conversion. Configuration, pin constraints, and I/O standards must be implemented in the FPGA toolchain and checked against the selected board-level design.
The L1 designation identifies the device performance and power-oriented speed grade, while CPG236I identifies the package and device options. FPGA designs require careful attention to configuration voltage, bank supply requirements, decoupling, clock integrity, and I/O standards. A 236-ball CSBGA also demands a land pattern and assembly process capable of handling fine-pitch balls and thermal management appropriate to the package.
Typical applications include industrial automation, industrial Ethernet bridges, data acquisition, embedded control, communications infrastructure, and compact instrumentation. The 106 I/O count is useful for parallel sensor interfaces, control buses, and multiple low-speed peripherals, while programmable logic can implement protocol converters, state machines, and timing functions without requiring a separate application processor.
For a new design, begin with the pinout file for the Artix-7 CPG236 package, then validate power rails, decoupling, configuration interfaces, and high-speed I/O constraints in the selected AMD implementation tool. This page combines the core device identity, package information, drop-in alternatives, and practical design considerations for faster component selection and PCB planning.
Аналоги без доработки для XC7A50T-L1CPG236I — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
XC7A50T-1CPG236I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
XC7A50T-2CPG236I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
XC7A50T-L1CPG236I Максимальные параметры и электрические характеристики
| Device Type | Artix-7 FPGA |
| Programmable Logic Cells | 52,160 cells |
| User I/O Count | 106 I/Os |
| Process Technology | 28 nm |
| Core Voltage | 0.95 V |
| Корпус | 236-pin CSBGA |
| Ball Count | 236 balls |
| Device Family | Artix-7 |
| FPGA Type | Field-programmable gate array |
| Тип монтажа | Surface mount |
| Temperature Indicator | Industrial-temperature suffix I |
| Packaging Type | Tray |
| Manufacturer | AMD |
| Статус жизненного цикла | Active |
Руководство по цоколевке XC7A50T-L1CPG236I в корпусе 236-pin csbga
Цоколевка для XC7A50T-L1CPG236I (корпус 236-pin csbga). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для XC7A50T-L1CPG236I.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
XC7A50T-L1CPG236I подходит для 6 применениеs: Industrial Automation Controller, Industrial Data Acquisition, Protocol Bridge and Interface Conversion, Sensor Aggregation and Condition, Embedded Communications Equipment, Compact Instrumentation and Test Equipment.
Industrial Automation Controller
The AMD XC7A50T-L1CPG236I fits an industrial automation controller because it combines 52,160 programmable logic cells with 106 user I/Os in a compact 236-pin CSBGA. The programmable fabric can execute motion sequencing, interlocks, timer blocks, and communication state machines, while the I/O count supports parallel encoders, discrete sensors, actuator outputs, and control buses. Using the L1 grade preserves the power and timing assumptions of an L1-based design. The primary engineering consideration is power architecture: VCCINT is 0.95 V, so the regulator, decoupling network, and sequencing must be checked against the device's bank and configuration requirements. Firmware and bitstream compatibility should also be verified before replacing an XC7A50T design in an existing controller.
Рекомендуется
Industrial Data Acquisition
The XC7A50T-L1CPG236I is useful for parallel data-acquisition systems where multiple sensors, counters, or ADC interfaces must feed programmable logic. Its 52,160 logic cells allow simultaneous channel control, timestamp generation, filtering, and buffer management, while 106 user I/Os provide substantial board-level connectivity. A practical implementation can use programmable logic for triggering and data packing before transferring results through an available communications interface. Because this is an FPGA rather than a fixed-function converter, clock-domain crossing, input timing, and I/O standard selection must be reviewed in the implementation tools. The 236-ball CSBGA also requires fine-pitch assembly and careful thermal design for sustained acquisition workloads.
Рекомендуется
Protocol Bridge and Interface Conversion
The AMD XC7A50T-L1CPG236I can bridge dissimilar interface formats by implementing multiple protocols in parallel programmable logic. Examples include parallel-to-serial conversion, UART or SPI aggregation, and packet framing between legacy peripherals and a higher-speed communications link. The 52,160-cell fabric provides enough parallelism for simultaneous endpoints, while the 106 I/Os expose the parallel-side signals. For this use, clocking and timing closure dominate device selection: external interfaces must be assigned to compatible banks, clock buffers and MMCM resources must be planned, and I/O voltage standards must match the board. The L1 grade is appropriate when the existing product qualification targets that specific speed and power class.
Рекомендуется
Sensor Aggregation and Condition
The XC7A50T-L1CPG236I can aggregate signals from multiple sensors and perform programmable filtering, thresholding, calibration, and fault detection before forwarding results to a host or actuator. Its 106 user I/Os support a mixture of parallel sensor channels and digital interfaces, while 52,160 logic cells enable simultaneous processing without offloading every operation to a microcontroller. For industrial sensing, use the device's programmable I/O to implement the required electrical standards and validate timing against the worst-case sensor delays. Care should be taken with power sequencing, because the L1 device uses a 0.95 V core supply. Thermal performance depends on board area, layer count, and the switching activity of the implemented logic, so FPGA power estimation should be run after the design is substantially complete.
Рекомендуется
Embedded Communications Equipment
The AMD XC7A50T-L1CPG236I fits compact communications equipment that requires programmable packet handling, line-rate interface conversion, or hardware-assisted control. Its Artix-7 architecture can combine dedicated logic pipelines with block RAM and DSP resources, although the exact block RAM and DSP counts must be checked in the device data sheet for the final design. The 236-pin CSBGA provides 106 user I/Os for parallel network interfaces, status signals, and configuration pins. Engineers should assign high-speed transceivers to appropriate banks, validate clocking resources, and confirm the exact supported I/O standards. For an existing L1 platform, preserving the same FPGA family reduces design work, while any move to the -1 or -2 grade requires new timing and power-supply signoff.
Рекомендуется
Compact Instrumentation and Test Equipment
The XC7A50T-L1CPG236I is suitable for compact instrumentation that requires deterministic sequencing, waveform generation, data capture, or control of multiple test channels. The 52,160-cell fabric can implement counters, trigger logic, digital filtering, and communication formatting in parallel, while 106 I/Os allow direct connection to converters, memory, and front-panel control logic. Its low-power-oriented L1 grade can support compact systems where sustained FPGA switching must remain controlled. Design work should include detailed clock planning to avoid jitter, proper decoupling for VCCINT and I/O banks, and a thermal review of the 236-ball package. If upgrading from the L1 device to another speed grade, rerun static timing analysis with the actual board-level clock and I/O constraints rather than relying on nominal device differences.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для XC7A50T-L1CPG236I — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | XC7A50T-1CPG236I | XC7A50T-2CPG236I |
|---|---|---|---|
| Package | 236-pin CSBGA | 236-pin CSBGA - same | 236-pin CSBGA - same |
| Brand | AMD | AMD | AMD |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 |
| Programmable Logic Cells | 52,160 cells | 52,160 cells | 52,160 cells |
| User I/O Count | 106 I/Os | 106 I/Os | 106 I/Os |
| Process Technology | 28 nm | 28 nm | 28 nm |
| Speed Grade | L1 | -1 | -2 |
| Mounting Type | Surface mount | Surface mount | Surface mount |
| Programming Technology | Field-programmable gate array | Field-programmable gate array | Field-programmable gate array |
Ключевые отличия
- Lower core voltage than the same-package -1 grade (против XC7A50T-1CPG236I)
- Purpose-specific L1 performance and power grade (против XC7A50T-2CPG236I)
- Package reuse within the same Artix-7 family (против XC7A50T-1CPG236I)
Заметки по проектированию
Design the supply network around the exact speed-grade requirements. AMD support information identifies 0.95 V VCCINT for XC7A50T-L1CPG236I, while XC7A50T-1CPG236I uses 1.0 V. Do not interchange these parts by changing only the FPGA bill of materials. Verify regulator accuracy, transient response, startup sequencing, and decoupling against the Artix-7 power guidance, and confirm the configuration interface voltage separately.
Use the official Artix-7 CPG236 package pinout file to construct the 236-ball land pattern and verify every ball assignment. The CSBGA is a fine-pitch, surface-mount package, so assembly capability, solder-mask definition, pad and via geometry, and X-ray inspection criteria must be agreed with the PCB assembler. Keep the package outline and courtyard consistent with the selected package documentation rather than inferring dimensions from a generic BGA footprint.
Treat the FPGA's configuration-dependent switching activity as an important thermal input. Estimate power after the clock, I/O, and memory utilization are known, then compare junction-temperature limits with the board's copper area and heat-spreading capability. The 236-ball CSBGA benefits from dense, uninterrupted copper beneath the device where the package design permits it, but the land pattern and assembly process must remain compliant with AMD guidance.
Plan clock and high-speed I/O assignments before committing the PCB. Apply the selected AMD implementation flow for bank constraints, clocking resources, drive strength, slew, and I/O standards, then validate board-level signal integrity with realistic loading. If substituting a -1 or -2 speed grade, rerun timing analysis with the actual clock constraints and manufacturing margins because a faster nominal grade does not automatically preserve the L1 design's behavior.
Avoid three common errors: treating CPG236 and other Artix-7 packages as interchangeable, assuming the L1 and -1 devices have identical VCCINT, and treating a listed inventory quantity as a production allocation. Confirm the exact ordering code, package pinout file, power requirements, configuration method, temperature grade, and lifecycle status. A board redesign and qualification plan are required for any speed-grade substitution.
Информация о соответствии
The industrial-temperature suffix identifies the product grade, but it does not establish AEC-Q100 qualification. Compliance status was not explicitly identified in the available product information.