XCKU5P-1FFVD900E - 304-I/O Kintex UltraScale+ FPGA | AMD
Артикул: XCKU5P-1FFVD900E ✓ АктивенXCKU5P-1FFVD900E Обзор
A field-programmable gate array is a semiconductor device whose digital circuits are configured after manufacture. In the product hierarchy, an FPGA is an integrated circuit containing programmable logic blocks, programmable I/O, memory resources, clocking, and dedicated signal-processing or serial connectivity blocks. Unlike application-specific integrated circuits, an FPGA allows architecture, interfaces, and logic behavior to be revised through bitstream updates, making it useful where requirements evolve or product variants share common hardware.
The XCKU5P-1FFVD900E provides 304 I/O in a 900-BBGA FCBGA package. Its high I/O count supports dense board-level interconnections between the FPGA, external memory, network transceivers, data converters, and high-speed peripherals. The -1 designation identifies the selected performance grade for design planning. Exact core count, embedded-memory capacity, transceiver count, speed grades, and operating-temperature limits must be confirmed against the AMD device table and package documentation before a design is released.
The device belongs to the Kintex UltraScale+ generation, which combines programmable logic with high-speed serial connectivity and substantial digital processing resources. The package's 900-ball arrangement creates a compact land pattern but also requires a dense PCB escape strategy. Ball assignment, power rails, decoupling requirements, and high-speed routing rules should be taken directly from AMD's package pinout files and the applicable UltraScale design guidance rather than inferred from a generic BGA footprint.
Typical uses include high-speed data acquisition, test and measurement, industrial control, communications infrastructure, signal processing, accelerator prototyping, and secure control systems. The 304-I/O interface is especially useful when a design must connect multiple converters, memory devices, clock sources, and fabric resources without using a larger board package. For a specific product qualification, engineers should verify transceiver line rates, supported protocols, memory interfaces, and power budgets against the intended architecture.
A successful implementation requires careful power planning, multilayer PCB construction, and controlled clocking. The 900-BBGA package demands short, low-inductance connections from power supplies to the appropriate balls and short return paths for high-speed signals. Decoupling, simulation, thermal analysis, and Bitstream-generation tool versions should be validated early because package assignment and device-support differences can affect implementation results.
This product summary combines the exact AMD orderable MPN, package identity, I/O count, and available documentation entry points with practical guidance for FPGA selection, PCB implementation, and qualification. It also distinguishes verified orderable information from device details that require confirmation in AMD's current Kintex UltraScale+ selection and package documentation.
Аналоги без доработки для XCKU5P-1FFVD900E — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Для этого товара нет аналогов без доработки.
Запросить аналогиXCKU5P-1FFVD900E Максимальные параметры и электрические характеристики
| Device Type | Kintex UltraScale+ FPGA |
| Manufacturer | AMD |
| Orderable Part Number | XCKU5P-1FFVD900E |
| Programmable Logic Type | Field-programmable gate array |
| Number of I/O | 304 I/O |
| Package Type | 900-BBGA |
| Package Subtype | FCBGA |
| Speed Grade | -1 |
| Тип монтажа | Surface mount |
| Статус жизненного цикла | Active |
Руководство по цоколевке XCKU5P-1FFVD900E в корпусе fcbga
Цоколевка для XCKU5P-1FFVD900E (корпус fcbga). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для XCKU5P-1FFVD900E.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
XCKU5P-1FFVD900E подходит для 6 применениеs: High-Speed Data Acquisition, Communications Infrastructure, Test and Measurement, Industrial Control and Automation, Signal Processing and Acceleration, Aerospace and Defense Prototyping.
High-Speed Data Acquisition
The XCKU5P-1FFVD900E is suitable for dense parallel data-acquisition designs because its 304 I/O can connect multiple converters, memory devices, clocks, and control signals while Kintex UltraScale+ programmable logic performs capture and processing functions. Place the FPGA near converter and memory interfaces to minimize trace length, then use the package pinout files to assign power, ground, and high-speed balls correctly. The main engineering trade-off is the complexity of routing a 900-BBGA package, so multilayer PCB construction and careful decoupling are essential.
Communications Infrastructure
The XCKU5P-1FFVD900E fits communications infrastructure designs requiring extensive programmable logic and high I/O density for protocol handling, packet processing, and external interface connectivity. Its 304 I/O supports multiple backplane, memory, and transceiver connections, while the -1 grade provides a defined performance class for system planning. Before selecting it, confirm the required transceiver count, line rate, protocol support, clock architecture, and power budget in the AMD device documentation; a smaller FPGA may be preferable when those resources are modest.
Test and Measurement
For automated test and measurement equipment, the XCKU5P-1FFVD900E can combine control sequencing, timing, pattern generation, and data handling within one programmable device. Its 304 I/O provides substantial connectivity to instruments, memories, trigger logic, and I/O expanders, making it useful for multi-channel or high-pin-count systems. The 900-BBGA package demands careful component placement and layer transitions, so verify differential-pair routing, clock jitter tolerance, thermal performance, and power sequencing before releasing the PCB.
Industrial Control and Automation
The XCKU5P-1FFVD900E is appropriate for industrial control systems that combine deterministic logic with a large number of external connections. The Kintex UltraScale+ architecture supports programmable control, monitoring, and interface functions, while 304 I/O can connect sensors, actuators, motion interfaces, communications, and local memory. For industrial deployment, confirm the exact temperature grade, supported I/O standards, power requirements, and functional-safety strategy. The large package can increase assembly and inspection complexity compared with a lower-pin-count FPGA.
Signal Processing and Acceleration
The XCKU5P-1FFVD900E can serve as a programmable signal-processing or accelerator platform when a design requires both substantial logic capacity and extensive data movement. Kintex UltraScale+ resources can be combined with external memory and high-speed converters, while the 304-I/O package simplifies dense device interconnection. Engineers should establish the required throughput, memory bandwidth, clock rate, and DSP utilization early. Because those resource figures require confirmation from the current AMD device table, the package should not be selected from the I/O count alone.
Aerospace and Defense Prototyping
The XCKU5P-1FFVD900E can support field-configurable aerospace, defense, and secure-control prototypes that benefit from extensive programmable logic and I/O. Its 304 I/O allows integration of multiple data paths, memory interfaces, configuration controls, and monitoring signals within a single device. Qualification still requires confirmation of the exact temperature grade, radiation, security, and lifecycle requirements. PCB implementation must follow the applicable package files and high-reliability assembly process rather than relying on a generic 900-BBGA layout.
Справочные инженерные данные для XCKU5P-1FFVD900E — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Manufacturer | AMD |
| Device Family | Kintex UltraScale+ |
| Device Type | FPGA |
| Package | 900-BBGA FCBGA |
| Number of I/O | 304 I/O |
| Speed Grade | -1 |
| Programmability | Field-programmable gate array |
| Lifecycle Status | Active |
Заметки по проектированию
Use the AMD UltraScale package pinout files to build the 900-BBGA land pattern and assign every power, ground, configuration, clock, and user-I/O ball. A dense FCBGA requires short escape routes, multilayer construction, and uninterrupted reference planes beneath high-speed interfaces. Validate the escape topology against AMD's package recommendations and confirm the exact device variant before releasing fabrication data.
Create the power-distribution network from the device's specified power rails rather than assuming that all supply balls can share one branch. Provide local bulk and high-frequency decoupling at the correct package balls, minimize loop area, and account for startup current when sizing regulators and sequencing logic. Validate rail limits, tolerance, and transient response with the current AMD power-estimation workflow.
The 900-BBGA package can concentrate heat across a large, complex device, so thermal performance depends on the board stack-up, copper planes, airflow, and adjacent heat sources. Model worst-case activity and the intended ambient environment, then verify the junction-temperature margin with the device-specific thermal model. Avoid placing temperature-sensitive components directly beneath the package unless the mechanical and thermal analysis supports that arrangement.
Route high-speed interfaces as controlled-impedance paths with continuous return paths and minimal layer transitions. Decouple clock inputs, follow AMD's recommended topology for clocking and configuration signals, and keep switching outputs away from sensitive inputs where the board area permits. Simulate the complete interconnect with realistic stack-up and termination values before fabrication, particularly for interfaces operating at high data rates.
Avoid treating the generic 900-BBGA outline as a complete pinout and do not infer the design from another Kintex UltraScale+ package. The suffix identifies package, speed, and ordering attributes that affect ball assignment and qualification. Check the exact MPN against AMD's device table and package files, and ensure the FPGA toolchain supports the selected device before committing the schematic and layout.
Информация о соответствии
Compliance attributes were not stated in the product listing for the exact XCKU5P-1FFVD900E. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status from the current AMD product documentation before environmental or automotive release.
