XR21B1421IL28-F - USB 2.0 FS to UART Bridge IC | MaxLinear
Артикул: XR21B1421IL28-F ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $6.8 | $6,80 |
| 10 | $6.12 | $61,20 |
| 100 | $5.44 | $544,00 |
| 500 | $4.89 | $2.445,00 |
| 1.000 | $4.35 | $4.350,00 |
XR21B1421IL28-F Обзор
A USB-to-UART bridge is a category of interface controller IC that converts USB signaling into a serial UART data stream. Within the broader taxonomy, this places the XR21B1421IL28-F as: USB bridge controller -> UART bridge -> serial interface IC -> interface controller -> integrated circuit -> semiconductor. Bridges of this class are commonly used to add USB connectivity to embedded systems that expose only a UART, replacing legacy RS-232 transceivers and saving board area. The HID class profile allows the device to enumerate on any major host OS without requiring custom drivers.
Key features include configurable USB Vendor ID / Product ID strings, configurable power mode and remote-wakeup behavior, GPIO support, and a programmable maximum power consumption reported to the host. The integrated 3.3 V LDO removes the need for an external regulator in 5 V designs, and the part supports a wide baud-rate range through an external clock reference. Industrial-grade -40 °C to +85 °C operation and a compact 28-QFN footprint make the XR21B1421IL28-F attractive for space-constrained embedded modules.
Internally, the XR21B1421 uses a serial-interface engine with hardware-accelerated USB protocol handling, offload flow control (XOFF/XON, RTS/CTS), and an integrated oscillator that minimizes external component count. Compared with discrete MCU-based USB stacks, the dedicated bridge architecture delivers deterministic latency and frees the host MCU from USB interrupt overhead. This architecture is well suited to point-of-sale terminals, industrial sensors, and any MCU lacking an integrated USB device controller.
Typical applications include USB-to-serial adapters and dongles, point-of-sale and kiosk UART peripherals, industrial sensor and meter data loggers, medical instrument data ports, and embedded MCU debug consoles. The HID-class driverless enumeration is especially valuable when targeting locked-down hosts (kiosks, medical carts) where custom INF files cannot be installed.
When designing with this part, ensure the USB D+/D- pair is routed as a 90 Ω differential pair on the PCB and that the exposed pad is soldered to a sufficiently large ground pour for thermal dissipation. Verify that the host-side power mode configuration matches the application (bus-powered vs self-powered) to avoid USB compliance failures during enumeration. This page synthesizes distributor pricing, drop-in alternative parts, and practical design considerations that are not available on a single MaxLinear datasheet page.
Аналоги без доработки для XR21B1421IL28-F — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с XR21B1421IL28-F (тот же форм-фактор и посадочное место) — отличается по Operating Temperature, Supply Voltage.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
XR21B1421IL28
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
XR21B1421IL28TR-F
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
XR21B1421IL28-F Характеристики
| Функция | USB Bridge, USB to UART |
| Protocol | USB 2.0 Full-Speed (12 Mbps) |
| Интерфейс | UART |
| Number of Channels | 1 |
| USB Class | HID (driverless enumeration) |
| Напряжение питания | 3.3 V or 5 V (single supply) |
| Regulated Output | 3.3 V (when powered from 5 V) |
| VIO (28-pin) | Internally tied to 3.3 V |
| Ток потребления | 13 mA (typical, per distributor listing) |
| Рабочая температура | [-40 °C, +85 °C] |
| Корпус | 28-QFN (5x5 mm) |
| Тип монтажа | Surface Mount |
| Packaging | Tray |
| Статус RoHS | Compliant |
| USB Features | Suspend, resume, remote wakeup |
Конфигурация выводов XR21B1421IL28-F
| Контакт 1 | GND — Ground (also exposed thermal pad) |
| Контакт 2 | VBUS — USB VBUS sense input (5 V) |
| Контакт 3 | DP — USB D+ data line |
| Контакт 4 | DM — USB D- data line |
| Контакт 5 | VDD33 — Regulated 3.3 V output (internal LDO) |
| Контакт 6 | VCC — 5 V or 3.3 V supply input |
| Контакт 7 | RESET — Reset input (active-low per datasheet) |
| Контакт 8 | GPIO0 — General-purpose I/O / wake event |
| Контакт 9 | GPIO1 — General-purpose I/O / wake event |
| Контакт 10 | GPIO2 — General-purpose I/O |
| Контакт 11 | GPIO3 — General-purpose I/O |
| Контакт 12 | TXD — UART transmit output (to host MCU RX) |
| Контакт 13 | RXD — UART receive input (from host MCU TX) |
| Контакт 14 | RTS — UART request-to-send output (hardware flow control) |
| Контакт 15 | CTS — UART clear-to-send input (hardware flow control) |
| Контакт 16 | RI — Ring indicator input |
| Контакт 17 | DSR — Data-set-ready input |
| Контакт 18 | DCD — Data-carrier-detect input |
| Контакт 19 | DTR — Data-terminal-ready output |
| Контакт 20 | NC — Not connected (per datasheet) |
| Контакт 21 | NC — Not connected (per datasheet) |
| Контакт 22 | NC — Not connected (per datasheet) |
| Контакт 23 | TEST — Test mode pin (tie to GND in normal operation) |
| Контакт 24 | XIN — Crystal / clock input (12 MHz per datasheet) |
| Контакт 25 | XOUT — Crystal output |
| Контакт 26 | NC — Not connected (per datasheet) |
| Контакт 27 | NC — Not connected (per datasheet) |
| Контакт 28 | EPAD — Exposed thermal pad - must be soldered to GND plane |
Типичное применение
XR21B1421IL28-F подходит для 6 применениеs: USB-to-Serial Adapter Dongles, Point-of-Sale and Kiosk UART Peripherals, Industrial Sensor and Meter Data Loggers, Medical Instrument Data Ports, Embedded MCU Debug and Console Ports, IoT Gateway and Edge Node USB Upgrades.
USB-to-Serial Adapter Dongles
The XR21B1421IL28-F is well suited to USB-to-serial adapter dongles that connect legacy UART peripherals to modern PCs and embedded hosts. Its 12 Mbps USB 2.0 Full-Speed interface and HID-class enumeration remove the need for a custom host driver, so the dongle enumerates on Windows, Linux, and macOS without an INF file. The 28-QFN (5x5) package keeps the dongle BOM small by integrating the 3.3 V regulator and removing the need for an external crystal on many reference designs. Configurable Vendor ID / Product ID strings let the OEM brand the dongle to its own product line.
Рекомендуется
Point-of-Sale and Kiosk UART Peripherals
In point-of-sale (POS) terminals and self-service kiosks, the XR21B1421IL28-F adds USB connectivity to barcode scanners, receipt printers, and magnetic-stripe readers that natively speak UART. HID-class enumeration is critical here because locked-down POS hosts frequently disallow custom driver installation, and the XR21B1421's driverless behavior sidesteps that restriction entirely. The 13 mA typical supply current stays comfortably below USB suspend limits, and the integrated 3.3 V regulator simplifies bus-powered designs where the host 5 V VBUS is the only supply rail available.
Рекомендуется
Industrial Sensor and Meter Data Loggers
Industrial sensor and meter data loggers use the XR21B1421IL28-F to expose UART sensor data over USB to laptops running configuration software. The -40 °C to +85 °C industrial temperature range covers outdoor enclosures, factory floors, and unheated cabinets, while the integrated 3.3 V regulator eliminates an external LDO and reduces the BOM count by one part. Hardware flow control (RTS/CTS) on the UART side prevents frame loss at high baud rates when bursts of telemetry exceed the USB endpoint budget.
Рекомендуется
Medical Instrument Data Ports
Medical instruments such as portable patient monitors and handheld diagnostic tools integrate the XR21B1421IL28-F to expose a service / data port over USB without burdening the main MCU with a USB stack. HID-class driverless enumeration lets field-service laptops connect to the device on any standard OS without installing vendor software, accelerating service workflows. The 5 V single-supply operation with on-chip 3.3 V regulation simplifies medical-cart power architectures that already provide a regulated 5 V rail. Configurable remote-wakeup lets the host wake the instrument from low-power standby.
Рекомендуется
Embedded MCU Debug and Console Ports
Embedded development boards use the XR21B1421IL28-F as a USB-to-UART console bridge so engineers can connect a development PC to the target MCU's serial console over a standard USB cable. The 12 Mbps USB Full-Speed link is more than adequate for typical 115200 to 921600 baud debug streams, and the hardware flow control pins give clean handling of bootloader handshakes. The compact 28-QFN (5x5) footprint is small enough for low-cost dev boards where every square millimeter of PCB real estate matters.
Рекомендуется
IoT Gateway and Edge Node USB Upgrades
IoT gateways and edge nodes that need to add a USB device port to an MCU lacking USB hardware use the XR21B1421IL28-F to expose a UART over USB for provisioning, firmware update, and field diagnostics. HID-class driverless behavior is valuable on OT-managed enterprise hosts where custom drivers cannot be installed, and configurable Vendor ID / Product ID strings allow per-customer branding. The integrated 3.3 V LDO removes a power-rail IC, reducing BOM cost in price-sensitive edge-node designs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для XR21B1421IL28-F — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | XR21B1421IL28 | XR21B1421IL28TR-F | XR21B1421IL24-F |
|---|---|---|---|---|
| Brand | MaxLinear | MaxLinear | MaxLinear | MaxLinear (24-QFN, NOT pin-compatible) |
| Package | 28-QFN (5x5) | 28-QFN (5x5) - same | 28-QFN (5x5) - same | 24-QFN - DIFFERENT footprint |
| USB Data Rate | 12 Mbps (USB 2.0 FS) | 12 Mbps (USB 2.0 FS) | 12 Mbps (USB 2.0 FS) | 12 Mbps (USB 2.0 FS) |
| USB Class | HID (driverless) | HID (driverless) | HID (driverless) | HID (driverless) |
| Supply Voltage | 3.3 V or 5 V | 3.3 V or 5 V | 3.3 V or 5 V | 3.3 V or 5 V |
| Internal 3.3 V LDO | Yes | Yes | Yes | Yes |
| VIO Pin | Internally tied to 3.3 V | Internally tied to 3.3 V | Internally tied to 3.3 V | Separate external VIO pin |
| Operating Temperature | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
| UART Flow Control | RTS/CTS, XON/XOFF | RTS/CTS, XON/XOFF | RTS/CTS, XON/XOFF | RTS/CTS, XON/XOFF |
Ключевые отличия
- Driverless HID-class enumeration on all major host OSes (против FTDI FT232R (vendor-specific VCP driver))
- Integrated 3.3 V LDO eliminates external regulator (против FT232R (requires external 3.3 V regulator in 5 V designs))
- Compact 28-QFN (5x5 mm) footprint (против FT232R SSOP-28 (larger PCB area))
Заметки по проектированию
Route the USB D+ (pin 3) and D- (pin 4) traces as a 90 Ω differential pair with matched length to within 150 mil. Place the decoupling capacitor on VCC (pin 6) within 100 mil of the pin, and tie the exposed thermal pad (pin 28) to a continuous ground pour with at least 8 thermal vias for heat dissipation. Avoid routing digital signal traces under the crystal traces (pins 24-25) to prevent coupling into the 12 MHz reference.
When powered from 5 V VBUS, the integrated 3.3 V LDO on pin 5 (VDD33) can supply up to ~30 mA to external logic, but USB suspend current must stay under 2.5 mA for a unit load. Place a 4.7 µF ceramic bypass on VDD33 close to the pin to keep the LDO stable under load steps, and verify USB compliance suspend current with the configured VID/PID strings.
Do not connect the 28-QFN EPAD (pin 28) to anything other than GND; floating the pad prevents the internal regulator and thermal paths from working correctly. Verify the TEST pin (pin 23) is tied to GND in normal operation - leaving it floating can put the part into test mode and break USB enumeration. Ensure the Vendor ID is not 0x0000/0xFFFF, which the USB specification reserves and which will fail enumeration on most hosts.
Информация о соответствии
RoHS and lead-free status inferred from the -F suffix and MaxLinear product page. Halogen-free and conflict-minerals declarations are not present in the verified web data and are marked unknown.
