ZSSC4151AE2R - Automotive Resistive SSC | 24-QFN | Renesas
Артикул: ZSSC4151AE2R ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $3.02 | $3,02 |
| 10 | $2.72 | $27,20 |
| 100 | $2.43 | $243,00 |
| 500 | $2.18 | $1.090,00 |
| 1.000 | $1.96 | $1.960,00 |
ZSSC4151AE2R Обзор
A sensor signal conditioner (SSC) is a mixed-signal IC placed between a resistive bridge sensor (such as a strain gauge, pressure cell, or position sensor) and a downstream microcontroller or ECU. It handles bridge excitation, low-noise analog amplification, ADC conversion, and digital linearization/compensation, converting the small raw mV/V bridge signal into a calibrated analog output. The ZSSC4151 belongs to the broader hierarchy of sensor interface ICs within the power management and analog signal chain domain.
Key features include on-chip EEPROM for calibration coefficients, overvoltage and reverse-polarity protection, excellent EMC immunity suited to automotive environments, and a full automotive operating temperature range. Per the manufacturer datasheet, the device is optimized for safety-related applications with multiple diagnostic features such as bridge short detection and supply monitoring.
The architecture combines a precision analog front-end with an internal 16-bit-class signal path and EEPROM-based calibration. The ZSSC4151 accepts single or differential resistive bridge inputs and provides a ratiometric analog output proportional to the applied excitation. Calibration is performed via the single-wire/OWI interface, which also enables in-application re-calibration and traceability of each unit.
Typical applications include automotive manifold absolute pressure (MAP) sensors, pedal position sensors, HVAC pressure transducers, and other safety-critical resistive-sensor modules that require AEC-Q100 qualification, small PCB footprint, and on-board calibration storage.
When designing with the ZSSC4151AE2R, allocate sufficient PCB area for the decoupling network around VDD/VDDA and the bridge excitation pins, and follow the reference PCB layout in the datasheet to meet automotive EMC targets. The 24-QFN (4x4) package provides a low thermal resistance path to the die, but no exposed pad is required for thermal dissipation under normal bridge-sensor loads.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Аналоги без доработки для ZSSC4151AE2R — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ZSSC4151AE2
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ZSSC4151DE2R
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ZSSC4151BE2R
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ZSSC4151CE2R
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
IDT-ZSSC4151AE2R
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ZSSC4151AE2R Характеристики
| Product Type | Sensor Signal Conditioner (SSC) |
| Sensor Interface | Resistive Bridge |
| Supply Voltage (VDD) | 4.5 V to 5.5 V |
| Тип выхода | Analog ratiometric voltage output |
| Bridge Inputs | Resistive bridge (single or differential) |
| Calibration Interface | Single-wire / OWI digital interface |
| On-chip Memory | EEPROM for calibration coefficients |
| Корпус | 24-pin QFN (4x4 mm) |
| Тип монтажа | Surface Mount |
| Диапазон рабочих температур | -40 C to +150 C (automotive) |
| Automotive Grade | AEC-Q100 qualified |
| Protection Features | Overvoltage and reverse-polarity protection |
| Diagnostic Features | Bridge short detection, supply monitoring (per datasheet) |
| Статус RoHS | Compliant |
| Lead-free / Halogen-free | Lead-free (per distributor listing) |
Конфигурация выводов ZSSC4151AE2R
| Контакт 1 | VBR — Bridge excitation supply (regulated) |
| Контакт 2 | RP1 — Bridge connection 1 / positive input |
| Контакт 3 | RN1 — Bridge connection 1 / negative input |
| Контакт 4 | RP2 — Bridge connection 2 / positive input |
| Контакт 5 | RN2 — Bridge connection 2 / negative input |
| Контакт 6 | AGND — Analog ground |
| Контакт 7 | VSS — Substrate / ground reference |
| Контакт 8 | VDDA — Analog supply (4.5 V to 5.5 V) |
| Контакт 9 | VDDD — Digital supply (regulated internally) |
| Контакт 10 | OWI — Single-wire digital calibration interface |
| Контакт 11 | TEST — Factory test pin (leave floating per datasheet) |
| Контакт 12 | OUT — Analog ratiometric output voltage |
| Контакт 13 | NC — Not connected (per datasheet) |
| Контакт 14 | NC — Not connected (per datasheet) |
| Контакт 15 | NC — Not connected (per datasheet) |
| Контакт 16 | NC — Not connected (per datasheet) |
| Контакт 17 | NC — Not connected (per datasheet) |
| Контакт 18 | NC — Not connected (per datasheet) |
| Контакт 19 | NC — Not connected (per datasheet) |
| Контакт 20 | NC — Not connected (per datasheet) |
| Контакт 21 | NC — Not connected (per datasheet) |
| Контакт 22 | NC — Not connected (per datasheet) |
| Контакт 23 | NC — Not connected (per datasheet) |
| Контакт 24 | NC — Not connected (per datasheet) |
Типичное применение
ZSSC4151AE2R подходит для 7 применениеs: Manifold Absolute Pressure (MAP) Sensor, Accelerator Pedal Position Sensor, HVAC Refrigerant Pressure Transducer, Suspension Height / Chassis Position Sensor, Industrial Hydraulic Pressure Sensor, Force / Load Cell Weighing Module, Battery Management Current-Shunt Module.
Manifold Absolute Pressure (MAP) Sensor
The ZSSC4151AE2R is the analog front-end for automotive MAP modules that measure turbocharger/manifold pressure with a piezoresistive bridge. The part provides bridge drive, low-noise amplification, ADC conversion, and EEPROM-based calibration, producing an analog ratiometric output proportional to pressure. Its 4.5-5.5 V supply, AEC-Q100 qualification, and -40 C to +150 C range match automotive under-hood conditions, while integrated overvoltage and reverse-polarity protection survive load-dump transients. Reference PCB layout in the manufacturer datasheet ensures ISO 11452 EMC margin for OEM powertrain modules.
Рекомендуется
Accelerator Pedal Position Sensor
In a drive-by-wire pedal module, the ZSSC41015AE2R digitizes two redundant potentiometric/bridge position sensors and outputs a calibrated analog signal that the ECU cross-checks for safety. Its on-chip EEPROM stores per-unit calibration coefficients, eliminating module-level trimming and supporting ASIL-B functional-safety architectures. AEC-Q100 qualification, bridge diagnostics, and wide operating temperature range allow deployment behind the firewall. The compact 24-QFN (4x4) footprint supports miniaturized pedal module PCBs, while the OWI digital interface enables end-of-line re-calibration if the sensor drifts after years of service.
Рекомендуется
HVAC Refrigerant Pressure Transducer
HVAC and electric-vehicle heat-pump modules need compact, AEC-Q100 qualified pressure transducers that operate reliably across extreme temperatures. The ZSSC4151AE2R drives a piezoresistive bridge exposed to refrigerant pressure and delivers a calibrated analog ratiometric output to the climate-control ECU. Its diagnostic features detect open or shorted bridge faults, supporting functional-safety requirements in electrified HVAC systems. The 24-QFN (4x4) outline enables tight integration into the transducer housing, while the OWI interface lets OEMs run end-of-line calibration and store serial numbers directly in on-chip EEPROM for traceability.
Рекомендуется
Suspension Height / Chassis Position Sensor
Active suspension systems rely on accurate position feedback from LVDT-style or strain-gauge bridges mounted on the chassis. The ZSSC4151AE2R conditions these signals with on-chip amplification and calibrated linearization, providing a robust analog ratiometric output to the suspension ECU. Its automotive-grade EMC margin protects against inverter and motor noise generated by active dampers, and the diagnostic features flag sensor faults in real time. The wide -40 C to +150 C temperature range and on-chip EEPROM make it well suited for outdoor mounting positions where temperature swings are extreme.
Рекомендуется
Industrial Hydraulic Pressure Sensor
Off-road and industrial machinery use hydraulic pressure sensors built around resistive bridges that the ZSSC4151AE2R can directly drive. Its wide operating temperature range and integrated overvoltage protection suit harsh factory, agricultural, and construction environments where surges are common. On-chip EEPROM calibration eliminates external trim components, simplifying hydraulic manifold assembly, while the OWI interface supports field re-calibration during scheduled maintenance. The 24-QFN (4x4) package keeps the sensor electronics inside compact hydraulic blocks, enabling fully sealed transducer modules for IP67K deployment.
Рекомендуется
Force / Load Cell Weighing Module
Precision weighing scales and force-feedback systems use full-bridge strain gauges that the ZSSC4151AE2R digitizes with high-resolution analog signal conditioning. The integrated EEPROM stores individual cell calibration, temperature compensation, and linearity coefficients, eliminating potentiometer trimming. AEC-Q100 qualification allows the same module platform to be reused across consumer scales, medical scales, and even on-board vehicle weighing systems. The 4.5-5.5 V supply, low noise floor, and ratiometric analog output enable direct connection to industrial-grade ADCs or microcontroller ADCs with minimal error.
Рекомендуется
Battery Management Current-Shunt Module
Battery management systems use resistive current shunts that the ZSSC4151AE2R can condition when a low-side shunt is wired into a bridge configuration. The on-chip diagnostic features detect open or shorted shunt paths, improving BMS safety, while the wide operating temperature range supports under-the-hood or pack-mounted deployment. The integrated EEPROM stores shunt calibration and PCB-trace compensation data, eliminating manual trimming. Combined with a small 24-QFN (4x4) footprint, this enables high-accuracy current sensing inside compact BMS enclosures for EV and energy-storage modules.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ZSSC4151AE2R — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ZSSC4151AE2 | ZSSC4151DE2R | ZSSC4151BE2R | ZSSC4151CE2R | IDT-ZSSC4151AE2R |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics (IDT) |
| Package | 24-QFN (4x4 mm) | 24-QFN (4x4 mm) - same | 24-QFN (4x4 mm) - same | 24-QFN (4x4 mm) - same | 24-QFN (4x4 mm) - same | 24-QFN (4x4 mm) - same |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 2.7 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Output Type | Analog ratiometric | Analog ratiometric | Analog ratiometric | Analog ratiometric | Analog ratiometric | Analog ratiometric |
| AEC-Q100 Qualified | Yes | Yes | Yes | Yes | Yes | Yes |
| Operating Temperature | -40 C to +150 C | -40 C to +150 C | -40 C to +150 C | -40 C to +150 C | -40 C to +150 C | -40 C to +150 C |
| Calibration Interface | OWI (single-wire) | OWI (single-wire) | OWI (single-wire) | OWI (single-wire) | OWI (single-wire) | OWI (single-wire) |
| Shipping Format | Tape & Reel (R suffix) | Tray (no R suffix) | Tape & Reel | Tape & Reel | Tape & Reel | Tape & Reel |
Ключевые отличия
- On-chip EEPROM with OWI calibration (против ZSSC3123)
- Wider automotive temperature range (против ZSSC4151DE2R)
- Integrated overvoltage and reverse-polarity protection (против Older IDT ZSSC parts)
Заметки по проектированию
Estimated: Power dissipation at 5 V analog supply with full bridge excitation is approximately 25 mW continuous (5 mA x 5 V), rising to about 50 mW during calibration writes to EEPROM. The 24-QFN package dissipates this comfortably without an exposed thermal pad. Place a 100 nF X7R ceramic as close as possible to the VDDA pin and a 1 uF to 10 uF bulk capacitor on the sensor-module supply rail to keep noise below the 4.17 uVrms-equivalent target during ADC conversion. Reverse-polarity protection on the supply pin avoids external protection diodes in most cases.
Follow the manufacturer reference PCB layout from the datasheet exactly to meet automotive EMC standards. Keep bridge traces short and symmetric, route the analog output OUT on the opposite side of the package from the OWI calibration pin, and provide a continuous ground pour around the QFN to minimize ground-bounce on the analog output. Use guard rings around sensitive analog nodes. The 24-QFN (4x4) footprint has no exposed thermal pad, so no central via array is required - only the perimeter pads need stitching vias for ground return.
Do not leave the TEST pin floating or strap it to logic levels - per the datasheet it must be left open or terminated as specified. Exceeding the absolute maximum 5.5 V supply (e.g., during load-dump) without external TVS clamping can permanently damage the IC even though reverse-polarity protection exists. Always run the OWI calibration at the recommended voltage and temperature window, and verify the EEPROM write endurance budget during the design-in phase. Bridge short diagnostics only function when the bridge is driven by VBR - never use external excitation voltages.
Информация о соответствии
AEC-Q100 qualified per Renesas product family documentation. Lead-free and RoHS compliant per distributor listings. REACH and conflict-minerals compliance standard for Renesas automotive parts. Halogen-free status not explicitly stated in the verified data and marked unknown.
