Mga Produkto (44,000+)

VSC7109XJW - 3.5 Gbps Quad-Channel Equalizer | Microchip
VSC7109XJW

VSC7109XJW - 3.5 Gbps Quad-Channel Equalizer | Microchip

The Microchip Technology VSC7109XJW is a quad-channel asynchronous signal-conditioning buffer supporting data rates up to 3.5 Gbps in a 32-TFQFN package with exposed pad. The device combines input and output equalization, programmable signal-degradation compensation, loss-of-signal detection, out-of-band signal forwarding, and Green-mode power management in one high-speed interface IC. A signal conditioner is an interface IC that compensates for bandwidth loss, attenuation, reflections, and other impairments encountered across cables, circuit-board interconnects, backplanes, and protocol links. Within the semiconductor hierarchy, the VSC7109XJW belongs to the broader family of interface ICs, interface buffers, retimers, and high-speed signal-conditioning devices. Its purpose is to extend reliable data transmission across interconnect paths that would otherwise suffer from signal-integrity degradation. Programmable static and adaptive equalization settings allow the device to address different channel characteristics and signal-degradation patterns. Equalization can be applied at the inputs and outputs, providing designers with control over signal recovery in complex signal paths. Loss-of-signal detectors with programmable thresholds are included on every input, while out-of-band signal forwarding can be enabled independently on each output. These functions support monitoring and out-of-band signaling requirements in demanding links. The VSC7109 supports data rates as high as 3.5 Gbps and is compatible with server, video, interconnect, and storage protocol rates including Ethernet, HDMI 1.4, 3G SDI, PCIe Gen 1, and SAS/SATA. Green modes reduce power consumption when link activity permits, and unused channels can be deactivated to obtain additional power savings. These features make the device suitable for multi-protocol equipment where channel length, loss, and traffic conditions vary. Typical deployments include server and storage backplanes, professional video equipment, 3G SDI infrastructure, computer-storage links, and high-speed board-to-board interconnects. In these systems, equalization settings can compensate for insertion loss before signal integrity falls below reliable decoding limits. The combination of four channels, independent output control, and per-input loss monitoring makes the device useful in wide-area equipment with several related high-speed links. Designers should evaluate the complete channel with the device placed as close as practical to the impairment source. Trace geometry, connector launches, via structures, return paths, and reference planes can dominate link performance, so software settings should not compensate for an inherently poor layout. Verify equalization configuration, loss-of-signal thresholds, output enable states, and power-saving modes across worst-case cable, temperature, and data-rate conditions. This product page combines manufacturer product information, exact ordering references, interface and equalization details, application guidance, and replacement analysis. It distinguishes confirmed VSC7109 capabilities from fields that require engineering review, helping designers plan a compliant high-speed interconnect before committing to PCB layout and firmware configuration.

RFQ Kontak
VSC7110XJW - 6.5 Gbps Signal Equalizer | Microchip
VSC7110XJW

VSC7110XJW - 6.5 Gbps Signal Equalizer | Microchip

The Microchip VSC7110XJW is a 6.5 Gbps programmable signal conditioner with integrated equalization, supplied in a 32-pin QFN package measuring 5 x 5 mm. The device operates from a 2.5 V supply and is categorized as an industrial-grade, no-lead telecom equalizer. Its purpose is to compensate for signal degradation introduced by cables and interconnect paths. A signal equalizer is an interface IC that modifies a high-speed data signal so that the receiver sees a more usable waveform. Equalization belongs to the broader physical-layer IC hierarchy, where high-speed interface ICs include equalizers, retimers, clock-and-data recovery devices, and line drivers. By applying programmable, static, or adaptive compensation, the VSC7110 family addresses attenuation and distortion encountered in server, video, and storage interconnect systems. Key features include a maximum signaling rate of 6.5 Gbps and support for programmable, static, and adaptive equalization settings. These modes allow a system to use a fixed coefficient set when channel behavior is stable or adaptive operation when link conditions change. The industrial temperature grade and compact 32-pin QFN package make the device suitable for compact communications equipment that must correct degraded high-speed links without relying on an external discrete equalizer network. The device operates from a 2.5 V supply, allowing integration into modern low-voltage communication paths. Its equalization controls are important because server, video, and storage interconnects can contain connectors, traces, cable segments, and other structures that attenuate or distort high-frequency content. Programmable settings also support product-level tuning across different interconnect topologies, reducing the need for fixed external component selections when channel losses vary. Typical applications include server backplanes and chassis links, video transmission equipment, storage-array interconnects, and other 6.5 Gbps-class cable and interconnect paths. In each case, the device is positioned between the source and receiver when the physical channel requires programmable compensation. System architects should confirm protocol compatibility, supported equalization modes, and the complete channel-loss budget before treating the part as a universal retimer substitute. The principal design consideration is channel characterization. Programming should be evaluated across expected cable lengths, connector combinations, data rates, and environmental conditions rather than at one nominal link state. Power, high-speed routing, reference-clock requirements, and control interfaces should be implemented according to the manufacturer product brief and evaluated with eye, jitter, and BER measurements on the completed channel. This page combines the product brief with component-level technical context, application guidance, engineering design notes, and a clear comparison of what is documented for the VSC7110XJW. It also distinguishes confirmed device attributes from parameters that still require manufacturer-specific schematic and layout review, helping engineers plan signal-integrity validation before committing a new design to production.

RFQ Kontak
VSC7111XJW - 11.5 Gbps Quad-Channel Signal Buffer | Microchip Technology
VSC7111XJW

VSC7111XJW - 11.5 Gbps Quad-Channel Signal Buffer | Microchip Technology

Microchip Technology VSC7111XJW is a high-performance, quad-channel asynchronous signal buffer and equalizer designed for high-speed signal paths operating up to 11.5 Gbps. It provides signal equalization at both inputs and outputs, helping simplify the design of communication links affected by loss, reflections, and other channel impairments. The device is housed in a 32-QFN package measuring 5 x 5 mm. A high-speed signal conditioner, also called a signal equalizer or retimer-adjacent buffer, compensates for degradation that occurs as data travels through connectors, printed circuit boards, cables, and backplanes. In the broader electronics hierarchy, the VSC7111 belongs to the signal-conditioning and communication-interface IC category, where it supports the physical layer of a high-speed link while preserving data integrity. Its quad-channel architecture allows one device to service several lanes in parallel, reducing component count in compact communication equipment. Key features include support for data rates up to 11.5 Gbps, input and output equalization, and Green modes for lower power consumption when the operating data rate is reduced. Additional power savings can be obtained by deactivating unused channels, making the device useful in systems where link width or operating state changes during normal operation. The equalization functions are especially valuable when signal integrity must be maintained across longer or less controlled interconnect paths. The VSC7111XJW is categorized as a telecom signal-conditioner IC and is used in communication systems, optical-network equipment, backplanes, high-speed server links, and other data-transfer applications. Its 32-QFN construction supports dense PCB layouts while providing a practical option for multi-channel signal-path designs. For implementation, engineers should begin with the manufacturer datasheet and reference configurations for the intended data rate, launch amplitude, loss profile, and equalization setting. Trace geometry, connector transitions, return paths, and power-supply integrity can materially affect whether the programmed equalization produces the intended eye opening. Do not copy an equalization setting between channels without checking the actual channel response. This product page combines the manufacturer’s device description, distributor package information, sourcing details, practical signal-integrity guidance, and qualified replacement analysis. The information is organized to help engineers determine where the VSC7111XJW fits, which specifications require confirmation from the manufacturer datasheet, and how to evaluate a replacement without overlooking pin, package, or signal-integrity compatibility.

RFQ Kontak
VSC7112XJW - 8.5 Gbps PCIe 3.0 Redriver | Microchip
VSC7112XJW

VSC7112XJW - 8.5 Gbps PCIe 3.0 Redriver | Microchip

The Microchip Technology VSC7112XJW is a two-lane PCI Express 3.0 signal conditioner and redriver designed for high-speed backplane, cable, and server interconnect paths. It supports asynchronous operation up to 8.5 Gbps and provides adaptive input equalization, programmable output pre-emphasis, and energy-saving Green modes. The device operates from a 2.5 V supply and is packaged in a 32-QFN package measuring 5 x 5 mm. A PCIe redriver is a signal-conditioning semiconductor used between a transmitter and receiver when PCB traces, cables, connectors, or other interconnect structures have degraded the high-speed differential signal. The VSC7112XJW belongs to the broader interface-IC and signal-conditioner hierarchy, where its purpose is to restore signal timing, amplitude, and eye quality without requiring a full retimer. Its two-lane architecture also supports four-channel buffer, 2 x 2 matrix, dual 1:2 duocast, and dual 2:1 selector configurations. Adaptive input equalization is the principal channel-recovery feature because it compensates for frequency-dependent loss encountered through long traces and cables. Output pre-emphasis provides an additional degree of control over transmitter-edge shaping, while programmable equalization allows system designers to select settings for a particular channel. Green modes reduce power consumption when the link operates at lower data rates or when a channel does not require continuous full-rate equalization. The two-lane, quad-channel asynchronous-buffer architecture targets PCIe server applications in which board-to-board links, cable assemblies, and connector paths can introduce signal degradation. Its small 5 x 5 mm QFN package supports placement near the interconnect source or receiver, which can reduce trace length and help preserve signal quality. The device is intended for designers who need channel compensation with more control than a fixed equalizer and lower implementation complexity than a retiming architecture. Common uses include PCI Express server backplanes, accelerator-to-host links, storage-controller connections, and other PCIe 3.0 paths operating at multi-gigabit rates. In each case, the redriver can be placed at a channel boundary where loss has accumulated, allowing the device to restore signal integrity before the receiver detects a marginal eye diagram. The primary design consideration is channel tuning. Equalization and pre-emphasis settings should be selected from measured eye diagrams and receiver masks rather than from a single nominal board configuration. Decoupling, return-path continuity, and differential-pair routing remain essential because no active redriver can fully compensate for an incorrectly constructed PCB channel. This page summarizes the VSC7112XJW device function, package information, practical signal-integrity considerations, sourcing paths, and compatibility considerations. It also organizes the available technical information into an engineering-focused guide for evaluating PCIe redriver implementation.

RFQ Kontak
VSC7113XJW - 10.3 Gbps Quad Signal Conditioner | Microchip
VSC7113XJW

VSC7113XJW - 10.3 Gbps Quad Signal Conditioner | Microchip

Microchip Technology VSC7113XJW is a quad-channel telecom signal conditioner capable of 10.3 Gbps operation, with a characterized signal range of 0 to 11 Gbps. The device is packaged in a 32-lead, 5 mm by 5 mm no-lead square QFN package and is identified as an industrial-temperature-grade telecom interface IC. Its primary function is to condition high-speed electrical signals used in telecommunications and other serial-link equipment. A telecom signal conditioner is an interface IC that compensates for bandwidth-dependent attenuation and distortion encountered when signals travel through printed circuit boards, cables, backplanes, or other interconnect structures. Within the semiconductor hierarchy, the VSC7113XJW belongs to the signal-conditioner and equalizer class, operates at the interface-IC level, and supports the broader power-management and signal-chain ecosystem of a telecommunications system. Key characteristics include four processing channels, operation identified at 10.3 Gbps, and a 0 to 11 Gbps characterized range. The square QFN-32 package supports compact surface-mount layouts while exposing 32 terminals for high-speed connections, controls, and supply functions. Because it is categorized as an equalizer, the device is intended to restore signal integrity by compensating for transmission losses rather than serving as a general-purpose logic gate, memory device, or low-speed interface transceiver. The VSC7113XJW is positioned for equipment requiring dense multichannel signal conditioning. Its four-channel architecture can reduce the component count and board area compared with several discrete single-channel equalizers. At data rates as high as 10.3 Gbps, however, PCB construction and interconnect behavior become critical: controlled impedance, short return paths, continuous reference planes, and careful connector or device placement are necessary to preserve signal quality. Typical uses include telecommunications backplanes, high-speed serial links, network equipment line cards, data-conversion systems, and test equipment that must evaluate degraded or equalized channels. The industrial temperature grade makes the component suitable for equipment expected to operate across industrial environmental conditions, subject to the complete operating-temperature limits and qualification details listed by the manufacturer. Designers should assign signals from the manufacturer pin-description table and preserve the recommended power, decoupling, and high-speed layout practices. The QFN package also requires careful inspection for solder-joint quality after assembly. Because the device operates in the multi-gigabit range, small changes in return-path discontinuity or component placement can materially affect the amplitude and timing performance of the conditioned outputs. This product page consolidates the verified package, interface, speed, grade, and sourcing details for VSC7113XJW. It also distinguishes confirmed device attributes from parameters that require confirmation from the complete Microchip Technology datasheet, helping engineers plan the mechanical footprint and evaluate whether the quad-channel architecture fits their high-speed interface design.

RFQ Kontak
VSC7153SS-02 - 24-PHY 3Gbps SAS Expander | Analog Devices
VSC7153SS-02

VSC7153SS-02 - 24-PHY 3Gbps SAS Expander | Analog Devices

Analog Devices VSC7153SS-02 is a SAS edge and fanout expander with 24 PHYs, support for 1.5 Gbps and 3.0 Gbps SAS signaling, table routing, and an SSP engine. The device is designed to consolidate and route SAS link traffic across storage systems where endpoint density, expandability, and deterministic internal routing are important. Its multi-PHY architecture makes it suitable for SAS backplane, storage-controller, and enclosure-management designs. A SAS expander is a semiconductor that sits between SAS initiator and target devices, providing multiple physical link connections and managed routing between them. Within the broader hierarchy, it is an interface controller, then a networking interface IC, then an integrated circuit and semiconductor. Compared with point-to-point passive switching, an expander can monitor links, respond to management requests, and route traffic through a controlled topology. The three headline characteristics of the VSC7153SS-02 are its 24 physical-layer interfaces, support for SAS link rates of 1.5 Gbps and 3.0 Gbps, and integrated table-routing and SSP-engine functions. These features allow one fabric component to consolidate numerous SAS links while providing a structured path for discoverability and topology management. The exact package dimensions, pin assignments, power ratings, operating temperature range, and lifecycle classifications must be confirmed in the family documentation before layout release. Technically, the device belongs to the application-specific controller category rather than a general-purpose microcontroller. Each PHY provides the physical signaling endpoint for a SAS connection, while the expander logic manages communication among initiator, target, and expander devices. Table routing defines how logical paths are organized, and the SSP engine supports Serial SCSI Protocol functions used for discovery and management. This combination is valuable when a system needs more fanout than a direct initiator-to-target arrangement can provide. Typical uses include 24-bay SAS storage enclosures, SAS backplane expanders, redundant storage arrays, and embedded server or workstation storage controllers. In these applications, the 24-PHY count can reduce the number of discrete routing and fanout elements while preserving individual SAS connectivity for attached disks. The 1.5 Gbps and 3.0 Gbps rates support deployments spanning legacy 3 Gbit/s SAS environments as well as newer 6 Gbit/s SAS links when the complete link path is compatible. Design planning should begin with the manufacturer's pin-description table, power architecture, reference clock requirements, and recommended decoupling network. Board-level validation must also cover SAS signal integrity, connector and cable compatibility, PHY-to-PHY routing, thermal margin, and the power-sequencing requirements of the complete storage subsystem. Do not infer exposed-pad or thermal-pad connections from the orderable suffix; verify them directly against the relevant package drawing and pinout. This product page distinguishes the confirmed VSC7153-02 family capabilities from orderable-package details that require separate validation. It also organizes sourcing questions, functional use cases, design cautions, and comparison requirements into an engineering-focused reference for storage-interface developers evaluating the VSC7153SS-02.

RFQ Kontak
VSC7153XSS-02 - 24-PHY 3Gbps SAS Expander | Analog Devices
VSC7153XSS-02

VSC7153XSS-02 - 24-PHY 3Gbps SAS Expander | Analog Devices

The Analog Devices VSC7153XSS-02 is a 24-PHY SAS edge/fanout expander supporting 1.5 Gbps and 3.0 Gbps operation, with table routing and an SSP engine. It is intended for storage systems that require multiple SAS links to be consolidated, routed, or expanded between initiators, disks, and storage subsystems. The exact package dimensions, pin configuration, electrical limits, and environmental ratings should be confirmed in the manufacturer datasheet before layout or qualification begins. A SAS expander is a semiconductor interface device that sits within the Serial Attached SCSI hierarchy and manages a group of SAS physical links. In this broader storage hierarchy, the expander provides link aggregation and routing between a host-facing interface and multiple SAS endpoints. The VSC7153XSS-02 combines 24 physical-layer channels with table-based routing, allowing a storage designer to construct scalable fan-in or fan-out topologies rather than connecting every endpoint through a separate host port. The device’s three principal documented characteristics are its 24-PHY configuration, support for both 1.5 Gbps and 3.0 Gbps SAS link rates, and hardware-assisted table routing through its SSP engine. These features make it relevant to SAS 1.5 and SAS 3.0 system architectures. Because the expander operates in the data path, system-level validation should include link training, negotiated-rate behavior, error handling, topology discovery, and recovery after cable or endpoint faults. The VSC7153XSS-02 is best understood as a protocol-aware interface component rather than a general-purpose I/O expander. Its PHY count determines how many physical SAS links can participate in a fabric, while the routing engine determines how those links are mapped. In a practical system, this can simplify backplane organization, reduce the number of direct host connections, and provide a defined switching layer between initiators and drive enclosures. Firmware and validation must still confirm routing-table behavior against the exact system topology. Typical applications include SAS disk-array controllers, storage backplanes, direct-attached storage enclosures, server storage fabrics, and fanout systems that expand a smaller number of host links into a larger set of device links. It is particularly relevant when a design requires table-based routing rather than a simple fixed point-to-point connection. Storage architects should evaluate it alongside controller resources, connector density, cable-length limits, enclosure power, and the target drive-generation requirements. The primary design consideration is preserving signal integrity across every high-speed SAS path. Differential routing, connector launches, return paths, reference-plane continuity, and compliance testing are central to a reliable implementation. The physical package and pin map must be taken directly from the manufacturer datasheet, while power, ground, thermal, and decoupling decisions should be based on the documented operating limits for the ordered device. This page organizes the documented VSC7153XSS-02 capabilities, application context, comparison parameters, and engineering checks into a practical reference. It also distinguishes confirmed product facts from parameters that must be established from the manufacturer datasheet, helping procurement, hardware, and validation teams align before beginning an SAS fabric design.

RFQ Kontak
VSC7154XYS/C - 36-PHY SAS Expander | Analog Devices
VSC7154XYS/C

VSC7154XYS/C - 36-PHY SAS Expander | Analog Devices

Analog Devices VSC7154XYS/C is a multimode, user-configurable 36-PHY Serial Attached SCSI expander supporting 1.5 Gbps and 3.0 Gbps SAS operation. Designed for edge and fanout configurations, the device expands the number of physical storage links available to an embedded storage controller. Its SAS functionality follows the ANSI T10 Serial Attached SCSI 1.0 and 1.1 specifications for port expansion. A SAS expander is an interface-controller semiconductor that sits between storage initiator logic and SAS target devices. It divides one logical storage connection into multiple physical links and can operate as an edge expander or a fanout expander. The VSC7154XYS/C therefore belongs to the hierarchy of SAS interface controller, I/O expander, interface IC, and semiconductor. In an edge configuration, it adds drive connectivity without requiring additional host-bus adapters; in a fanout configuration, it consolidates multiple expander paths. The principal feature is its 36 physical-layer channels, combined with support for both 1.5 Gbps and 3.0 Gbps data rates. Thirty-six PHYs provide the physical connectivity required by midrange and enterprise storage systems, including blade servers, JBOD configurations, and RAID systems. One verified distributor listing reports a low power consumption of 500 mW, although system-level power requirements should be evaluated from the complete manufacturer datasheet and the intended board configuration. The edge-versus-fanout operating mode is user-configurable, allowing one expander design to support different storage topologies. This flexibility is useful when a system must connect multiple disks or enclosure backplanes while retaining high serial-link throughput. Before placing the device in a new design, confirm the supported SAS topology, firmware behavior, clocking requirements, reference design, and power-supply sequencing against the manufacturer documentation. Signal-integrity management is a central implementation concern because the expander must preserve communication across numerous simultaneous SAS links. PCB routing should use controlled-impedance transmission paths, minimize stub lengths, provide appropriate connector and termination practices, and maintain suitable separation between adjacent high-speed nets. The expander also requires stable supply rails and careful thermal planning when all 36 PHYs are active. This page consolidates the verified product identity, SAS capabilities, sourcing information, application context, and practical design considerations into one engineering-oriented reference. It also distinguishes documented functions from parameters that require confirmation in the manufacturer datasheet, helping designers avoid unsupported assumptions before schematic capture, firmware integration, and production qualification.

RFQ Kontak
VSC7155VU-02 - 8-Bit I/O Expander IC Interface Controller | Analog Devices
VSC7155VU-02

VSC7155VU-02 - 8-Bit I/O Expander IC Interface Controller | Analog Devices

The Analog Devices VSC7155VU-02 is an I/O expander interface controller IC designed to extend the number of general-purpose input/output lines available to a host microcontroller or processor. Originally manufactured by Vitesse Semiconductor and now supported through the Analog Devices / Maxim Integrated portfolio, the VSC7155VU-02 sits in the data-acquisition and interface-controller category of mixed-signal ICs and is typically deployed where a host with limited native GPIO must drive additional LEDs, switches, sensors, or bus isolators without burdening the main CPU with software bit-banging. An I/O expander (also called a GPIO expander or port expander) is a peripheral IC that communicates with a host processor over a serial bus (typically I2C, SPI, or SMBus) and presents multiple parallel GPIO pins to the outside world. Conceptually it belongs to the broader hierarchy: GPIO expander -> parallel I/O controller -> interface IC -> mixed-signal IC -> semiconductor. Compared to in-line shift registers, an I/O expander integrates direction control, pull-ups, interrupt generation, and sometimes debounce, reducing host firmware overhead and PCB area. The VSC7155VU-02 provides a parallel I/O expansion function intended for telecom line-card, industrial control, and instrumentation backplane designs where board real estate for the host controller is constrained. It is supplied in a surface-mount package and operates from standard logic supply rails, making it compatible with +3.3 V and +5 V digital sections. Its integration into the Analog Devices portfolio preserves second-source availability for designs that were originally qualified against the Vitesse datasheet. Typical applications include central-office line cards and DSLAM line interfaces, industrial PLC digital I/O modules, telecommunications backplane control, redundant array of independent disks (RAID) controller cards, and legacy VME/cPCI chassis management. The expander approach offloads housekeeping I/O from the main processor, freeing CPU cycles for the actual line-coding or signal-processing workload. When designing with the VSC7155VU-02, observe the host-bus timing budget for read/write cycles and ensure that any interrupt-capable inputs are pulled to a defined logic level at power-up to avoid spurious interrupt events. Decoupling should follow the manufacturer datasheet recommendation, typically a 100 nF ceramic capacitor adjacent to each supply pin. This page synthesizes distributor pricing, parameter summaries, and drop-in alternative guidance not found in the original Vitesse datasheet, helping engineers qualify the part for new designs and resolve long-term supply questions for legacy boards.

RFQ Kontak
VSC7156XYT-03 - 24-PHY 1.5/3.0Gbps SAS Expander | Analog Devices
VSC7156XYT-03

VSC7156XYT-03 - 24-PHY 1.5/3.0Gbps SAS Expander | Analog Devices

Analog Devices VSC7156XYT-03 is a 24-PHY Serial Attached SCSI edge/fanout expander designed for embedded midrange and enterprise storage systems. The device supports SAS operation at 1.5 Gbps and 3.0 Gbps and implements SAS port expansion defined by ANSI T10 Serial Attached SCSI 1.0 and 1.1 specifications. It is packaged for surface-mount integration in systems such as blade servers, JBODs, and RAID platforms. A Serial Attached SCSI expander is a semiconductor controller that consolidates multiple SAS links behind a wider SAS interface. In the technology hierarchy, the VSC7156XYT-03 is a SAS interface controller, an interface IC, and ultimately an integrated circuit used to expand storage connectivity. Its 24 physical-layer channels allow one expander device to manage more drive-facing links than a direct-attachment controller alone, reducing the number of expander functions required in larger storage architectures. The principal documented features are 24 SAS PHYs, support for 1.5 Gbps and 3.0 Gbps operation, and compatibility with edge and fanout expander configurations. These capabilities suit storage systems that need multiple serial channels for disk or SSD access while presenting a scalable interface to a host-side SAS controller. The device targets embedded storage rather than general-purpose computing, where deterministic link management and support for established SAS expansion topologies are more important than general processor performance. The VSC7156 architecture separates physical-layer signaling from higher-level storage management. Each PHY provides the electrical connection required by SAS links, while the expander coordinates port expansion and discovery across multiple physical connections. At 3.0 Gbps, the supported line rate provides substantially greater theoretical bandwidth than 1.5 Gbps operation, allowing systems to use faster SAS media when the complete storage path supports that rate. Actual end-to-end performance still depends on the attached controller, drives, cabling, backplane, firmware, and workload. Typical applications include blade servers, JBOD enclosures, RAID systems, and embedded midrange or enterprise storage equipment. In each case, the VSC7156XYT-03 can provide the fanout needed to connect multiple SAS endpoints while preserving a structured expansion architecture. System designers should confirm compatibility among the host SAS controller, expander firmware, drive qualification, connector and cable implementation, and power-delivery design before production deployment. For a new layout, preserve the recommended high-speed return paths and bypass-capacitor placement from the manufacturer datasheet. Confirm the exact package drawing, exposed-pad or thermal requirements, pin assignments, and maximum operating conditions for the XYT-03 ordering code before fabrication. Treat the board as a multi-gigabit signal-integrity design in which connector transitions, reference planes, power impedance, and grounding influence whether the advertised SAS rates are reached reliably. This product page consolidates the documented SAS capabilities, intended storage applications, package-related uncertainties, and sourcing information for VSC7156XYT-03. It also provides practical guidance for comparing storage-interface options while avoiding unsupported assumptions about electrical or lifecycle details that require direct confirmation from the manufacturer documentation.

RFQ Kontak
VSC7157XYS-03 - SAS Port Expander | Maxim Integrated
VSC7157XYS-03

VSC7157XYS-03 - SAS Port Expander | Maxim Integrated

Maxim Integrated VSC7157XYS-03 is a SAS port expander and I/O expander integrated circuit designed for embedded midrange and enterprise storage systems, including blade servers, JBODs, and RAID configurations. It supports SAS port expansion under the ANSI T10 Serial Attached SCSI 1.0 and 1.1 specifications for edge and fanout expander architectures. The device is associated with the VSC7157 family and is supplied under the ordering designation VSC7157XYS-03. An SAS expander is an interface IC that increases the number of Serial Attached SCSI devices addressable by a storage controller. Within the storage hierarchy, it sits between an initiator or host adapter and attached SAS disks, tape drives, or other storage peripherals. Unlike a direct-connect SAS controller, an expander enables scalable fanout and edge topologies, reducing the number of host connections required for larger storage systems. The core application requirement is compatibility with the ANSI T10 Serial Attached SCSI 1.0 and 1.1 specifications. This makes the VSC7157 family applicable to storage equipment designed around the SAS interconnect architecture rather than generic parallel SCSI. Edge configurations support systems where expansion occurs near the host adapter, while fanout configurations support larger collections of peripheral devices through a hierarchical expander arrangement. The manufacturer datasheet identifies embedded midrange and enterprise storage as the principal target environments. Those systems typically combine multiple drive bays with demanding requirements for reliable device discovery, fault isolation, and scalable enclosure wiring. Using a dedicated SAS port expander allows the storage controller to manage a broader device population while preserving a structured interface topology across blade servers, JBODs, and RAID systems. Typical implementation work includes checking the host-side SAS link requirements, confirming the expander topology required by the enclosure, and assigning physical connector and backplane signals correctly. Board-level implementation must also account for power sequencing, signal integrity, thermal conditions, and the system behavior required when a drive, cable, or expander path becomes unavailable. A key sourcing consideration is that VSC7157XYS-03 is a specific ordered variant. Its protocol capability and device family are established, but package dimensions, pin assignments, electrical limits, and orderable packaging details should be confirmed against the manufacturer datasheet before committing a PCB layout or production release. This product page consolidates the confirmed SAS expansion capability, applicable ANSI T10 specifications, target storage applications, sourcing workflow, and engineering-design considerations. It also distinguishes the specific VSC7157XYS-03 ordering code from generic expander functions, helping designers evaluate protocol fit before requesting a quote or beginning detailed implementation.

RFQ Kontak
VSC7157YS-03 - 36-PHY 1.5/3 Gbps SAS Edge/Fanout Expander IC | ADI/Maxim
VSC7157YS-03

VSC7157YS-03 - 36-PHY 1.5/3 Gbps SAS Edge/Fanout Expander IC | ADI/Maxim

The Analog Devices Inc. (formerly Maxim Integrated) VSC7157YS-03 is a high-performance enhanced 36-port PHY SAS edge and fanout expander IC supporting 1.5 Gbps and 3.0 Gbps serial-attached SCSI (SAS) data rates. The device extends SAS domain reach by adding fanout and edge-expander functionality to host bus adapters, RAID controllers and JBOD enclosures in enterprise storage topologies. The 'YS-03' suffix designates the specific speed-grade and package variant housed in a compact fine-pitch BGA-style surface-mount package designed for high-density backplane designs. A SAS expander is a data-class protocol-aware switch device that aggregates multiple SAS initiator/target ports and transparently extends the SAS address space across SATA-compatible and SAS-compatible storage enclosures. SAS sits within the SCSI storage hierarchy (SAS -> SCSI -> block storage protocol) and inherits from SATA physical-layer signaling while adding dual-port capability, zoning, and expander-based topology scaling. Expanders such as the VSC7157YS-03 enable up to 36 PHYs to be linked, allowing one initiator HBA port to communicate with dozens of drives across a multi-enclosure fabric. Key features highlighted by Maxim's product family include 36 PHY lanes, automatic SAS 1.5/3.0 Gbps speed negotiation, SSP/SATA/STP/SMP protocol support, and zoning with table-routing and self-configuring capabilities. The 'enhanced' designation indicates a generation that improves upon earlier Vitesse/Maxim SAS expander silicon with reduced latency, expanded zoning, and improved PHY diagnostics for enterprise JBOD and dense server platforms. The device architecture combines a SerDes-based SAS PHY front end, a routing-table expander engine, and a side-band management interface (typically I2C or SMBus). It supports wide-port aggregation (e.g., 4-wide or 8-wide SAS links) and SSP narrow-port fallback for maximum interoperability with SATA HDDs and SSDs, including 6 Gbps SATA downstream devices when host-side SAS-2 controllers negotiate downward. Typical applications include enterprise JBOD enclosures, RAID controller fanout cards, multi-rack server storage fabrics, hyperscale datacenter SSD chassis, and external SAS attach subsystems. Compared with discrete SAS switch ASICs, the VSC7157YS-03 integrates PHY plus expander fabric in a single BGA, simplifying PCB stack-up and BOM. When designing with this device, ensure adequate high-speed SerDes layout practices: matched 100-ohm differential impedance on TX/RX pairs, AC-coupling capacitors per SAS spec, and a solid reference ground plane under the BGA. Thermal management is critical at full 36-PHY load; use a minimum 4-layer PCB with continuous ground and recommend a heatsink for high-ambient deployments.

RFQ Kontak
VSC7158XHT-03 - 18-PHY 1.5/3.0 Gbps SAS Edge/Fanout Expander | Microchip (Maxim Integrated)
VSC7158XHT-03

VSC7158XHT-03 - 18-PHY 1.5/3.0 Gbps SAS Edge/Fanout Expander | Microchip (Maxim Integrated)

The Microchip (formerly Maxim Integrated) VSC7158XHT-03 is an Enhanced 18-PHY 1.5 Gbps and 3.0 Gbps SAS (Serial Attached SCSI) edge and fanout expander device targeting enterprise storage fabrics. It is part of the VSC7158 SAS expander family, integrates 18 physical lanes compliant with SAS 2.0, and supports both 1.5 Gbps (G1) and 3.0 Gbps (G2) serial rates for direct and switched storage topologies. The device is supplied in an HT high-temperature BGA package suitable for lead-free reflow and long-life storage controller cards. What is a SAS expander? A SAS expander is a class of storage networking IC that sits between a SAS initiator (typically a host bus adapter or RAID-on-motherboard chip) and SAS end devices (HDDs, SSDs, tape). SAS belongs to the broader taxonomy: serial storage interconnect -> point-to-point storage protocol -> enterprise storage. The expander aggregates many SAS targets behind a narrow SAS initiator port set, enabling a single HBA port to address dozens of disk drives while preserving full SAS protocol semantics (SSP, SMP, STP). Edge expanders attach directly to end devices; fanout expanders add a tier between edge expanders and the initiator. Key features of the VSC7158XHT-03 include 18 PHY ports operating at 1.5/3.0 Gbps, support for SAS 2.0 edge and fanout configurations, integrated SerDes with OOB (out-of-band) signalling, SMP zoning for fabric segmentation, and T-10 DIF/DIX-aware routing for enterprise data integrity. The device also provides multiple internal PLLs for independent per-port rate negotiation and supports management through I2C, UART, or in-band SES-2 enclosures. Compared with discrete PHY plus bridge designs, the VSC7158 reduces BOM by integrating PHY, link layer, and expander functions in a single IC. Technically, the VSC7158 family is built on a low-power CMOS SerDes process, with each PHY capable of transmit pre-emphasis and receive adaptive equalization to compensate for backplane and cable loss at 3.0 Gbps. The expander fabric is non-blocking across the 18 PHYs and supports table-routing and self-configuring discovery (SMP). Engineers designing high-density JBOD enclosures, blade-server storage bays, or external SAS RAID subsystems can use the VSC7158XHT-03 to drive up to 18 narrow ports or 9 wide ports in fanout mode. Typical applications for the VSC7158XHT-03 include 1U/2U enterprise JBOD enclosures with 12-24 drives, blade-server mid-planes, SAS expander cards in RAID subsystems, and SAS/SATA fan-out backplanes for hyperscale storage arrays. It also appears in legacy tape-library back-end fabrics. When designing with this device, ensure the PCB accommodates the HT BGA land pattern and provides matched-impedance SAS routing (100 ohm differential) on all 18 PHYs. Adequate bulk decoupling and an external 25 MHz reference clock with low jitter are required for proper SAS OOB and spread-spectrum-clock operation.

RFQ Kontak
VSC7161XHK - 10-Port SAS Expander 1.5/3.0 Gbps | Analog Devices
VSC7161XHK

VSC7161XHK - 10-Port SAS Expander 1.5/3.0 Gbps | Analog Devices

The Analog Devices VSC7161XHK is a 10-port SAS expander that supports serial-attached SCSI link rates of 1.5 Gbps and 3.0 Gbps, packaged in a 176-lead TQFP (XHK) surface-mount package. It expands a single SAS host bus interface into ten external SAS ports for midrange and enterprise storage enclosures that require active port expansion rather than additional host adapters. A SAS expander is a semiconductor switch that sits between a SAS host adapter (HBA) and one or more disk drives or expander-enclosed disks. It converts one narrow serial link into multiple independent serial links, allowing a storage enclosure to present more drives to the host than a single HBA port can address. In the SAS hierarchy, the VSC7161XHK belongs to the class of storage interface controllers and port expanders used inside rack-mounted storage subsystems. Key characteristics include ten SAS ports operating at 1.5 Gbps and 3.0 Gbps, support for both SAS and SATA devices behind the expander, an evolutionary upgrade path for storage systems that later adopt 6 Gbps host adapters, and low-power operation suited to always-on storage appliances. The device also provides the enclosure management and fan-control support functions commonly expected in expander backplanes, reducing the component count of the backplane controller section. Architecturally, the part implements a dedicated SAS link layer that handles 8b/10b encoding, clock recovery, disparity management, and packet-level framing across all ten ports. Port-to-port paths are handled in hardware rather than by an external microcontroller, so the expander can fan out traffic deterministically without firmware intervention on every path. Because the device is a fixed-function interface IC rather than a programmable controller, design-in effort is concentrated on backplane routing, connector pin assignment, and thermal budgeting rather than firmware development. Typical deployments are midrange and enterprise direct-attached and network-attached storage enclosures, JBOD chassis, and SAS backplane carriers where drive count per controller must scale without adding HBA ports. It is equally suitable for drive enclosures requiring mixed SAS/SATA support and for server enclosure applications that need active port expansion instead of passive splitters. One key design consideration is backplane signal integrity: with ten high-speed serial links on one board, differential pair routing, connector launch geometry, and reference-plane continuity control the achievable link margin more than any single IC specification. Keep the expander close to the connectors and keep the return path continuous through every layer change to limit skew and insertion loss. This page consolidates manufacturer product information, ordering and availability references, drop-in and near-equivalent part relationships, and practical backplane-design guidance into a single engineering record that goes beyond the core product page.

RFQ Kontak
VSC7170XYQ-01 - 2:1 SATA Failover Switch, 3 Gbps | Analog Devices
VSC7170XYQ-01

VSC7170XYQ-01 - 2:1 SATA Failover Switch, 3 Gbps | Analog Devices

The Analog Devices (formerly Maxim Integrated / Vitesse Semiconductor) VSC7170XYQ-01 is a Serial ATA (SATA) port multiplexer and signal buffer implementing a 2:1 failover switch function for SATA Gen1 (1.5 Gbps) and SATA Gen2 (3.0 Gbps) links. Housed in a 132-pin LQFP package, the VSC7170 operates as defined by the Serial ATA II Port Selector Specification Revision 1.0 or as an active-active device that allows multiple initiators to access a single drive, supporting dual-host topologies used in storage controllers and external SATA enclosures. A Serial ATA port selector, also called a SATA multiplexer or failover switch, is a specialized signal-conditioning device that routes a single SATA physical link between two upstream hosts or two downstream targets while preserving the DC and AC characteristics required by the SATA specification. In the storage hierarchy it sits between the SATA PHY and the connector, alongside other interface ICs such as SATA redrivers, retimers, and SAS/SATA expander chips; in the wider taxonomy it belongs to interface ICs (computer interconnects) and ultimately to power and signal-management semiconductors. Key features include support for SATA 1.5 Gbps and SATA II 3.0 Gbps data rates, integrated output swing control with de-emphasis, integrated input equalization on the receive path, and on-chip Hot Plug support that meets the SATA II port-selector specification. The part operates from a single 1.2 V core supply plus a 3.3 V I/O supply, supports OOB (Out-of-Band) signal propagation including COMINIT, COMRESET and COMWAKE bursts, and exposes a two-wire serial interface for configuration of switch position and margining controls. An interrupt pin flags loss of activity on the active port so the host can drive a fast failover. Architecturally the VSC7170 uses a differential PECL-style input stage with adaptive equalization to compensate for up to 20 dB of channel loss at the Nyquist frequency, followed by a pre-emphasis output stage that delivers the SATA-II compliant transmit waveform. Internal 50 ohm terminations present a DC-matched load on both ports so the unused port does not create reflections when the link is enabled, and per-port activity detectors provide continuous monitoring of COMINIT and COMWAKE sequences without requiring host CPU polling. Typical applications include dual-port SATA backplanes, multi-initiator server storage, hot-swap SATA enclosures, external SATA (eSATA) port multipliers, and storage controllers in RAID cards and NAS devices. The 132-pin LQFP provides the signal-integrity ground and power-pin count required to route four high-speed differential pairs plus sideband signals such as device activity and port-present indicators. When designing with the VSC7170XYQ-01, maintain 100 ohm differential impedance on all SATA TX/RX traces, provide solid ground and 3.3 V/1.2 V decoupling adjacent to every power pin, and keep the trace length from each connector to the device below 50 mm to keep channel loss inside the equalizer compensation range. Drive the I2C configuration port with a 3.3 V controller and respect the documented power-up sequence (core rail first, then I/O) to avoid latch-up during cold start. This page synthesizes distributor pricing, same-family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Kontak
VSC7223XJV - 16 Gbps Quad Retimer/Redriver | Microchip
VSC7223XJV

VSC7223XJV - 16 Gbps Quad Retimer/Redriver | Microchip

Microchip Technology VSC7223XJV is a four-channel multirate retimer/redriver that supports data rates up to 16 Gbps in a 48-QFN package measuring 5 mm by 9 mm. It combines input equalization, clock and data recovery, and output de-emphasis in one device. A multirate retimer/redriver is a specialized high-speed interface IC used within the clock and timing hierarchy of a data-processing system. It receives a degraded high-speed signal, recovers its timing and data, applies channel compensation, and then redrives the signal to improve system margin across cables, printed circuit board traces, backplanes, and other copper media. The device provides four independent high-speed channels and supports operation to 16 Gbps. Its input equalization compensates for frequency-dependent loss in FR-4 printed circuit board traces and copper cabling. Clock and data recovery removes timing distortion, while output de-emphasis helps control signal integrity in lossy channels and improve interoperability with downstream receivers. According to the manufacturer information, VSC7223 is intended to increase system margin and extend media-driving distance. The documented examples include equalization of more than 65 inches of FR-4 at 10 Gbps and more than 15 meters of 24 AWG SFP+ direct-attach copper cable at 10 Gbps. These figures describe the specified application environment and should be validated in the final system layout, connector, and enclosure. Typical uses include 10G and 16G Ethernet copper links, data-center equipment, telecommunications infrastructure, server connectivity, test equipment, and other high-speed backplane or cable interfaces. The industrial temperature grade and no-lead 48-terminal package support applications where robust environmental performance and compact surface-mount assembly are required. When designing around VSC7223XJV, preserve the controlled-impedance topology and reference-plane continuity of high-speed differential pairs. Place bypass capacitors close to supply pins, keep return paths continuous, and verify channel loss, insertion loss, crosstalk, and connector behavior with channel simulation and eye measurements before production. This product record combines verified manufacturer and distributor information with practical engineering guidance, package and interface details, sourcing data, and an explicit assessment of available drop-in replacements. No compatible substitute is listed unless its package, pin compatibility, and electrical proximity can be independently verified.

RFQ Kontak
VSC7224XJV - 12.5Gbps 4-Channel CDR Retimer | Microchip
VSC7224XJV

VSC7224XJV - 12.5Gbps 4-Channel CDR Retimer | Microchip

The Microchip VSC7224XJV is a four-channel unidirectional adaptive channel extender with clock and data recovery, rated up to 12.5 Gbps and housed in a 48-QFN package measuring 5 mm by 9 mm. It combines analog equalization, digital equalization, clock and data recovery, and configurable output de-emphasis in one signal-conditioning device. The four-channel architecture allows one device to condition four independent serial links while supporting copper cable, backplane, and other lossy interconnect applications. A retimer with clock and data recovery is a specialized interface IC that receives a high-speed serial signal, recovers its transmitted clock and data, applies programmable equalization, and reserializes the conditioned data. Within the interface-IC hierarchy, the VSC7224 belongs to the retimer and redriver class. Unlike a simple redriver, which amplifies and reshapes an existing signal, a retimer can regenerate the signal through a CDR stage, improving interoperability across lossy channels. The VSC7224 family supports multiple rate grades. Manufacturer information identifies operation up to 10.3 Gbps, 11.5 Gbps, or 12.5 Gbps depending on the selected product variant. The VSC7224XJV is listed as a four-channel 12.5 Gbps retimer/redriver, while the VSC7224XJV-01 is identified as an 11.5 Gbps variant. Analog and digital equalization provide compensation for frequency-dependent loss, and output de-emphasis helps control edge amplitude and reduce signal-integrity problems on longer channels. The 48-QFN package consolidates four channels into a compact footprint suitable for telecommunications equipment, data-processing systems, and high-speed backplane links. Because the device performs CDR rather than only analog amplification, it is particularly useful when transmitter and receiver clocking cannot tolerate accumulated deterministic jitter or signal degradation. Designers must still preserve controlled impedance, provide adequate power and ground connectivity, and verify the configuration for the target data rate and channel loss. Typical uses include 10G/25G-class serial links, telecommunications backplanes, server and networking equipment, and cable or copper interconnects. The VSC7224 is most appropriate when each link requires independent equalization and clock recovery rather than simple gain compensation. Its four-channel organization can also reduce board-area requirements compared with implementing four separate single-channel signal-conditioning devices. Layout quality is critical in multirate retimer designs. Place input and output bypass capacitors close to their associated supply pins, maintain continuous ground-plane return paths, and route high-speed differential pairs as short, impedance-controlled transmission lines. Avoid adding test pads or long branch stubs on sensitive channels, because parasitic capacitance and inductance can degrade eye opening even when the equalizer is correctly configured. This page consolidates the manufacturer’s device architecture, exact variant distinctions, sourcing information, and application-specific engineering guidance. It also distinguishes the 12.5 Gbps VSC7224XJV from the 11.5 Gbps VSC7224XJV-01, helping designers select the correct speed grade and plan a repeatable high-speed layout.

RFQ Kontak
VSC7226UI-06 - Quad-Channel Transceiver | Microchip
VSC7226UI-06

VSC7226UI-06 - Quad-Channel Transceiver | Microchip

The Microchip Technology VSC7226UI-06 is a quad-channel interface controller and parallel-to-serial/serial-to-parallel transceiver designed for high-bandwidth data transmission between buses, backplanes, and other subsystems. It provides 4 communication channels and is supplied as an interface IC in the VSC7226 product family. An interface transceiver is a semiconductor device that converts data between parallel and serial formats while supporting reliable signal transfer over board-level communication paths. Within the hierarchy of interface ICs, parallel-to-serial and serial-to-parallel converters provide the physical data-rate adaptation needed by communication equipment, and they sit between general-purpose processors and higher-speed physical links. Their primary design goals are efficient data handling, predictable signal integrity, and reliable operation in infrastructure and industrial systems. The VSC7226 family combines four conversion channels in one device, reducing the number of separate interface devices required in a multi-lane subsystem. The VSC7226UI-06 ordering code identifies a specific member of the Microchip Technology product family, while the base VSC7226 description identifies the device as a quad-channel parallel-to-serial and serial-to-parallel transceiver. This architecture is intended for backplanes and other subsystems that require efficient movement of multiple data streams. From an implementation perspective, the device belongs to the interface-controller portion of a communication system rather than the processor or physical-transceiver portion. Its four channels allow a designer to organize related high-speed links through a common controller. This can simplify board partitioning and provide a consistent interface between parallel subsystem logic and serial communication paths. Exact operating conditions, lane rates, electrical levels, timing limits, and channel configuration must be selected from the manufacturer datasheet before final circuit design. Typical application areas include network equipment, industrial infrastructure, and other systems that move data between buses, backplanes, and connected subsystems. The 4-channel architecture is particularly relevant when four related parallel-to-serial or serial-to-parallel paths are required. Engineers should verify the exact pin assignment, power requirements, interface protocol, and signal-integrity constraints against the VSC7226 family documentation before laying out a PCB. A key design consideration is that ordering suffix variations can represent different grade or configuration options while retaining the same family architecture. Confirm the exact VSC7226UI-06 datasheet and package information rather than treating an undated secondary PDF as the controlling document. This page distinguishes documented product functions from electrical details that require direct manufacturer confirmation. This page combines the verified product identity, interface-controller role, four-channel architecture, source links, practical application guidance, and a structured comparison with related VSC7226 ordering options. It also highlights where engineers must verify package, pinout, timing, and lifecycle details before committing a design to production.

RFQ Kontak
VSC7323VH - 10G Ethernet MAC Controller | Microchip
VSC7323VH

VSC7323VH - 10G Ethernet MAC Controller | Microchip

The Microchip Technology VSC7323VH is a 10G Ethernet MAC controller with support for ten 1G Ethernet interfaces, implemented in 0.18-micron CMOS technology and supplied in a 728-pin TBGA package measuring 42.5 mm by 42.5 mm. The device accepts 2.5 V and 3.3 V I/O supplies, supports an industrial temperature range extending to +85 °C, and includes a standard five-pin P1149.1 JTAG test port. An Ethernet MAC controller is an interface IC that manages communication between a host or switching subsystem and physical Ethernet interfaces. Within the semiconductor hierarchy, it belongs to the Ethernet interface-controller class, which sits under network interface ICs and broader communication semiconductors. The VSC7323VH is intended for demanding systems that require a consolidated 10G MAC function alongside multiple 1G Ethernet connections. Key features include ten integrated 1G Ethernet MAC positions, one 10G Ethernet MAC function, a 2.5 V or 3.3 V I/O operating range, and an industrial temperature rating to +85 °C. Its 0.18-micron CMOS implementation reflects the process technology used for this generation of high-integration networking silicon. The five-pin JTAG interface supports boundary-scan-oriented manufacturing and test access. The 728-pin TBGA package provides extensive high-speed connectivity for parallel or otherwise complex networking interfaces. Its 42.5 mm by 42.5 mm body is substantially larger than common QFN and QFP packages, reflecting the high pin count and routing demands of the device. Board design must consequently address dense escape routing, controlled-impedance links, via arrays, return-path continuity, and power-distribution integrity. Typical applications include enterprise and metro Ethernet switching platforms, multi-service provisioning equipment, industrial networking systems, and telecommunications access products. The combination of ten 1G and one 10G MAC channel can reduce the number of discrete interface devices required in a line-card or switching subsystem while retaining dedicated test access through JTAG. Designers should verify the original Vitesse Semiconductor datasheet, signal-integrity requirements, pin assignment, and power sequencing before layout. Because this 728-pin TBGA has a large ball array, manufacturing capability, via-in-pad suitability, thermal management, and X-ray inspection requirements should be confirmed with the PCB assembler. Commercial availability and pricing are quote-based in the supplied market data. This page consolidates verified distributor listings, the available VSC7323 datasheet information, package constraints, procurement details, and a qualified drop-in comparison. It also separates confirmed specifications from unavailable electrical parameters, helping engineers evaluate the VSC7323VH without mistaking unsupported values for manufacturer guarantees.

RFQ Kontak
VSC7385XYV - 5-Port Gigabit Ethernet Switch + PHY | Microchip
VSC7385XYV

VSC7385XYV - 5-Port Gigabit Ethernet Switch + PHY | Microchip

The Microchip Technology VSC7385XYV is a five-port Gigabit Ethernet switch with integrated physical layer, or PHY, devices in a surface-mount package. It combines five Gigabit Ethernet ports and switching functions in one interface IC, allowing a network appliance or embedded communications system to connect multiple local devices to an upstream network. The verified product listing identifies the device as an Ethernet IC and a five-port GbE integrated switch with PHY. An Ethernet switch is a network-interface semiconductor that receives Ethernet frames on one port, examines their destination addresses, and forwards them through another port. A PHY supplies the physical signaling interface between the switch logic and twisted-pair or other physical network media. Integrating the PHYs with the switching engine reduces the number of separate Ethernet components required in a compact network endpoint, industrial controller, access point, or embedded gateway. The verified listings identify the VSC7385XYV as an active, surface-mount device. No verified package designation, pin count, operating-voltage range, maximum data rate value, clock configuration, thermal rating, or AEC-Q100 status was supplied in the source data. Those attributes remain designated as data-needed rather than being inferred from the product family or from unrelated Ethernet components. The VSC7385XYV is best suited to five-port Gigabit Ethernet aggregation, embedded network bridging, industrial communication gateways, and equipment that needs multiple Ethernet connections in one subsystem. Its integrated switch-and-PHY architecture can simplify board partitioning compared with a design using discrete switch and PHY devices. Final interface selection still depends on the exact package, supported copper media, electrical limits, firmware requirements, and reference configuration in the manufacturer documentation. Engineers should begin with the manufacturer datasheet and confirm the land pattern, pin multiplexing, supply rails, clocking, LED or status signaling, and reference schematic before layout. The alternate vendor listing names the part as an Ethernet controller and the distributor listing categorizes it as a switch IC. These classifications are consistent with the five-port Gigabit Ethernet switch-plus-PHY description. The principal design trade-off is integration versus flexibility. Consolidating switch and PHY functions can reduce component count and board area, but a tightly integrated part can be less forgiving of unusual media, connector, timing, or thermal requirements than a modular design. Validate magnetics, termination, layout, power sequencing, and environmental requirements on the final platform. This page consolidates the verified distributor identity, availability indications, product classification, packaging information, and substitute-search results for VSC7385XYV. It also distinguishes confirmed facts from missing datasheet parameters and avoids presenting unverified pin assignments, pricing, or cross-brand replacements as engineering facts.

RFQ Kontak
VSC7389XHO - 16-Port GbE Switch with 8 PHYs | Microchip
VSC7389XHO

VSC7389XHO - 16-Port GbE Switch with 8 PHYs | Microchip

The Microchip Technology VSC7389XHO is a 16-port Gigabit Ethernet switch with eight integrated PHYs, supplied in a 596-ball BGA package measuring 35 mm by 35 mm. It is categorized by distributors as a special-purpose telecommunications switch IC and combines Ethernet switching functionality with eight physical-layer interfaces in one high-pin-count package. The available distributor information identifies Microchip Technology as the manufacturer and confirms the 16-port Gigabit Ethernet architecture, eight PHY integration, 596-BGA construction, and 35 mm by 35 mm package dimensions. An Ethernet switch is a network-semiconductor device that receives Ethernet frames at multiple physical ports, examines frame destination information, and forwards traffic toward the appropriate output port. In the networking hierarchy, this VSC7389XHO belongs to Ethernet switch ICs, interface ICs, and ultimately integrated semiconductors. Its eight integrated PHYs connect copper Ethernet links to the switching fabric, while the remaining switch ports support network-facing connections configured through the broader telecommunications switching system. The three headline characteristics of the VSC7389XHO are its 16 Gigabit Ethernet ports, eight integrated PHYs, and 596-ball BGA package. Integrating eight PHYs can reduce the number of external physical-layer devices required in a multiport design. The large BGA also provides the pin density needed for a complex switching solution, although its 596 balls and 35 mm by 35 mm outline make PCB layout, assembly, inspection, and thermal management substantially more demanding than those for a small leaded or low-pin-count package. Because the supplied search results do not expose the complete Microchip datasheet, switching throughput, latency, supported media types, clocking, management interfaces, power specifications, or operating-temperature limits, those values should not be inferred from the distributor category. The 596-ball package should be treated as a land-grid-array device with a dense peripheral fanout. Component classification as a “special purpose” analog switch reflects distributor taxonomy and does not establish that the device is a simple analog multiplexer; the manufacturer description identifies it as a 16-port Gigabit Ethernet switch with eight PHYs. Typical design uses include industrial Ethernet aggregation, telecommunications access equipment, embedded network infrastructure, and multiport copper-network systems. In such systems, the eight integrated PHYs can serve direct copper links, while a larger switch configuration may use additional external interfaces. Final suitability depends on protocol support, media capability, management features, timing, power, and thermal requirements that are not exposed in the verified distributor snippets. The primary engineering consideration is the 596-ball BGA assembly. A valid replacement must match the land pattern, ball assignment, electrical performance, firmware expectations, and thermal requirements; merely using the same 35 mm by 35 mm outline is insufficient. Before layout release, engineers should obtain the manufacturer datasheet, pinout, reference design, recommended decoupling network, PCB stack-up, and assembly process information, then validate the complete Ethernet design for signal integrity and thermal performance. This page consolidates the verified distributor identity, package information, port and PHY counts, sourcing links, comparison parameters, and practical replacement criteria for VSC7389XHO. Because no verified pin-compatible substitutes or numeric price tiers were provided, the record explicitly preserves those uncertainties instead of presenting generic same-category parts as drop-in replacements.

RFQ Kontak
VSC7390XHO - 24-Port Gigabit Ethernet Switch | Microchip
VSC7390XHO

VSC7390XHO - 24-Port Gigabit Ethernet Switch | Microchip

The Microchip Technology VSC7390XHO is a 24-port integrated Layer-2 Gigabit Ethernet smart switch with integrated copper transceivers, supplied in a 596-BGA package measuring 35 mm by 35 mm. The device provides four Gigabit Ethernet ports and 48 integrated tri-speed copper transceivers supporting 10/100/1000 Mbps operation. Its IEEE 802.3ab-compliant Gigabit Ethernet PHYs make it suitable for systems that require local switching, copper media access, and integrated network-interface functionality in one package. A smart Ethernet switch is an interface IC that connects multiple network nodes and forwards Ethernet frames according to Layer-2 addresses. Within the device hierarchy, this product belongs to Ethernet controllers, network interface controllers, interface ICs, and integrated circuits. Integrating switching and physical-layer circuitry can reduce the number of separate PHY components required in a network appliance, although the complete design still requires adequate board area, thermal management, signal-integrity control, and verified magnetic-interface components. The principal verified features of the VSC7390XHO are its 24-port Layer-2 switching architecture, four Gigabit Ethernet ports, 48 integrated tri-speed copper transceivers, and support for 10/100/1000 Mbps data rates. The integrated PHYs are identified as IEEE 802.3ab compliant, providing a defined Gigabit Ethernet copper-interface basis for the system. The package also provides a high pin count and substantial contact area, making careful layout, grounding, and power-plane design important in a production layout. The product is specified as lead-free and RoHS compliant. Its manufacturer product page identifies the VSC7390 family as “Not Recommended for new designs,” making lifecycle status an important qualification criterion. This designation does not mean that every existing design must be replaced immediately, but new equipment should normally use a currently recommended switching platform unless an approved lifecycle program specifically supports the older family. Typical uses for this device include managed network appliances, industrial Ethernet equipment, telecommunications access hardware, storage systems, surveillance infrastructure, and other embedded systems requiring multiple copper Ethernet connections. Its integration can simplify board partitioning when the required channel count and physical-layer configuration match the target network architecture. It is less suitable when a design requires a different number of ports, a different copper-media standard, or a currently recommended lifecycle pathway. Before committing a layout, engineers should confirm the complete VSC7390 pin and ball assignment from the manufacturer documentation, validate power and thermal requirements, and preserve high-speed copper-channel geometry. The verified data does not provide a complete public ball map, so this page does not fabricate pin assignments or claim a specific reference design. Production procurement should also confirm package marking, die revision, lifecycle obligations, and manufacturer-approved sourcing. This page consolidates the verified manufacturer status, distributor listings, package information, and RoHS and lead-free statements. It also distinguishes the VSC7390XHO from generic Ethernet-switch families and explicitly avoids presenting cross-package functional substitutes as pin-compatible drop-in replacements.

RFQ Kontak
VSC7395XYV - 5+1 Gigabit Ethernet Switch | Microchip
VSC7395XYV

VSC7395XYV - 5+1 Gigabit Ethernet Switch | Microchip

Microchip Technology VSC7395XYV is an integrated 5+1-port Gigabit Ethernet switch with five tri-speed copper PHYs, one RGMII/GMII interface, nonblocking wire-speed switching, and a 364-BGA (23x23) package. It operates from a single 3.3 V supply and provides five IEEE 802.3ab-compliant 10/100/1000 Mbps copper ports. An integrated Gigabit Ethernet switch is a network-interface IC that combines multiple Ethernet physical-layer transceivers, frame-processing logic, and a switching fabric in one device. Within the product hierarchy, it is an Ethernet switch, network interface IC, communications semiconductor, and power-management-dependent mixed-signal component designed for telecommunications and embedded networking equipment. The principal features include five integrated copper transceivers, one RGMII/GMII tri-speed port, support for 10, 100, and 1000 Mbps operation, nonblocking wire-speed performance, and a single 3.3 V supply. The copper interfaces are identified as IEEE 802.3ab compliant. Its 364-BGA package provides a high pin count suitable for parallel data, clock, control, power, and ground connectivity. Technically, the device consolidates multiple PHY channels and switch resources on one silicon die, reducing the number of separate Ethernet components required in a multiport design. The RGMII/GMII port provides a flexible processor- or switch-facing uplink when the five copper ports are used for downstream connections. Exact clocking, latency, MAC-table, management-interface, and power-consumption details require confirmation in the manufacturer documentation and were not present in the supplied excerpts. Typical applications include industrial Ethernet gateways, telecommunications access equipment, embedded routers, network-interface controllers, and managed switching products. Its five copper PHYs suit equipment that must connect several wired endpoints while retaining a high-speed uplink through RGMII or GMII. The obsolete lifecycle status means new designs should confirm availability, lifecycle options, or a supported successor with Microchip before committing to the part. Designers should pay particular attention to the 364-BGA escape routing, high-speed RGMII/GMII signal integrity, power-plane integrity, and thermal performance. Because the VSC7395XYV is listed as end-of-life and obsolete by verified sources, board revisions should preserve the footprint and power architecture when long-term maintenance is required. This page consolidates the verified port, speed, voltage, package, lifecycle, and environmental information with same-family replacement context and practical design guidance. It also clearly identifies parameter gaps, avoiding unsupported claims about latency, management features, pricing, or full pin-level connectivity.

RFQ Kontak
VSC7395XYV-03 5+1-Port Gigabit Ethernet Switch | Microchip
VSC7395XYV-03

VSC7395XYV-03 5+1-Port Gigabit Ethernet Switch | Microchip

The Microchip Technology VSC7395XYV-03 is a 5+1-port Gigabit Ethernet switch with integrated transceivers, five tri-speed 10/100/1000 Mbps copper ports, and one additional tri-speed RGMII/GMII interface, housed in a 364-BGA package measuring 23 x 23 mm. It provides nonblocking wire-speed switching for telecommunications, industrial networking, and embedded Ethernet systems. An Ethernet switch is a networking semiconductor that receives Ethernet frames on one or more ports and forwards them toward their destination ports using hardware address information. The VSC7395XYV-03 belongs to the Ethernet switch IC category, which sits within interface ICs, semiconductor networking components, and broader data-communication systems. Its integrated copper transceivers reduce the need for separate PHY devices when each copper link remains within its supported electrical and distance requirements. The principal feature is the combination of five integrated tri-speed copper transceivers and one additional tri-speed RGMII/GMII interface. Each copper transceiver supports 10, 100, and 1000 Mbps operation and is identified as IEEE 802.3ab compliant in the manufacturer documentation. Nonblocking wire-speed performance allows each supported port to process traffic at its negotiated line rate without a central throughput bottleneck, provided the aggregate traffic remains within the switch fabric's design limits. The mixed-signal architecture combines digital frame switching with analog copper transceiver functions. This integration can simplify a multilayer board by consolidating PHY and switch functionality, but it also places demanding signal-integrity, power-supply, thermal, and layout requirements on the implementation. Differential Ethernet pairs, reference clocks, reset or control signals, and power rails must be routed according to the manufacturer layout guidance. Controlled impedance and short return paths are particularly important around the 364-pin BGA device. Typical applications include enterprise and industrial Ethernet switching, telecommunications access equipment, network-interface aggregation, industrial control networks, and embedded systems that need several copper links plus a processor-facing RGMII or GMII connection. The RGMII/GMII port can provide a high-speed parallel interface to a host processor or another switching element, while the integrated copper ports handle endpoint connectivity. The primary design consideration is that VSC7395XYV-03 is a complex mixed-signal BGA component rather than a simple low-pin-count Ethernet PHY. Power sequencing, clock integrity, decoupling, magnetics or cable qualification, thermal management, and high-speed differential routing must be planned together. Review the manufacturer datasheet and reference design before freezing the PCB layout. This page organizes the confirmed port, speed, protocol, package, and compliance characteristics of VSC7395XYV-03 and separates them from parameters that require a datasheet-specific engineering review. It also provides application guidance, comparison fields, and design notes to help engineers assess whether this highly integrated Ethernet switch suits a new board design or a constrained legacy redesign.

RFQ Kontak