Mga Produkto (44,000+)

VSC8582XKS-06 Dual-Port GbE PHY | Microchip Technology
VSC8582XKS-06

VSC8582XKS-06 Dual-Port GbE PHY | Microchip Technology

The Microchip Technology VSC8582XKS-06 is a dual-port Gigabit Ethernet physical-layer transceiver with copper and fiber support, IEEE 1588 MAC capability, Intellisec security features, and VeriTime precision timing. The device is packaged in a 256-pin PBGA measuring 17 x 17 mm and is identified by the complete ordering code VSC8582XKS-06. It combines two Gigabit Ethernet channels in one package for space-constrained networking equipment. A Gigabit Ethernet PHY is the physical-layer component that converts digital data into electrical signaling for transmission over copper media and optical signaling for fiber links. Within the network hierarchy, the VSC8582XKS-06 is an Ethernet interface IC, a physical-layer transceiver, and a semiconductor designed for communications infrastructure. Dual-port integration reduces component count and board area compared with using two unrelated single-port PHYs. The VSC8582 family combines dual GbE interfaces with Intellisec and VeriTime capabilities. Intellisec supports security-oriented network designs, while VeriTime addresses precise timing requirements. IEEE 1588 MAC capability is particularly relevant to synchronized network equipment. These characteristics make the device suitable for enterprise, industrial, smart-grid, video, database, and cloud-network equipment where deterministic timing and protected Ethernet links are important. The -06 ordering suffix identifies a specific configuration within the VSC8582 family. The manufacturer product page identifies the VSC8582 as a dual-port GbE PHY with copper or fiber connections. Detailed electrical ratings, temperature limits, clock requirements, transceiver variants, and media-dependent performance should be selected from the complete manufacturer datasheet and the exact ordering-code table rather than inferred from the family description. Typical implementations include dual-port network switches, industrial Ethernet gateways, timing-sensitive telecom equipment, fiber-to-copper media equipment, server-adjacent network interfaces, and smart-infrastructure control systems. A two-port board can simplify point-to-point links, daisy-chained equipment, dual-homed controllers, or redundant communication paths while keeping the Ethernet PHY section compact. Layout is the primary implementation constraint for this 256-pin PBGA. Place the PHY close to the associated magnetics or optical components, keep high-speed copper and fiber-related connections short, provide clean power and ground distribution, and follow the manufacturer’s reference layout and via requirements. Validate the completed board for insertion loss, return loss, crosstalk, skew, and electromagnetic compatibility under the required operating environment. This page organizes the known VSC8582XKS-06 family information, package identity, application context, engineering considerations, and ordering guidance. It also distinguishes the exact -06 device from related family suffixes so procurement, schematic review, PCB footprint checks, and qualification work can be performed against the correct configuration.

RFQ Kontak
VSC8582XKS-09 - Dual-Port GbE PHY | Microchip Technology
VSC8582XKS-09

VSC8582XKS-09 - Dual-Port GbE PHY | Microchip Technology

The Microchip Technology VSC8582XKS-09 is a dual-port Gigabit Ethernet PHY with a 1 V supply, operating from -40°C to 125°C in a 256-pin PBGA package measuring 17 mm × 17 mm. Its interface set includes GMII, SerDes, SPI, and TBI connectivity, while the VSC8582 family adds Intellisec and VeriTime capabilities for secure cloud-network applications. A Gigabit Ethernet PHY is a physical-layer interface IC that converts digital data into electrical signals suitable for copper or fiber network media and converts received signals back into digital data. Within the network interface hierarchy, the VSC8582 belongs to the Ethernet PHY class of interface ICs, connecting MAC, controller, or switching logic to physical network links. A dual-port PHY integrates two Gigabit Ethernet channels and associated line-driver and receiver functions in one device. The VSC8582 family is positioned for enterprise, government, industrial, smart-grid, video, database, e-commerce, and collaboration systems. Its Intellisec feature is intended to add security-related functionality at the physical layer, while VeriTime supports timing-sensitive network applications. The -09 ordering code is supplied in the 256-PBGA package and is specified for a 1 V supply and the extended -40°C to 125°C temperature range. The 256-PBGA construction supports dense integration and high-speed interconnect access, but it also makes careful PCB layout essential. The 17 mm × 17 mm package requires an advanced multilayer board with short, impedance-controlled routes, continuous reference planes, and low-parasitance power distribution. Analog and digital supply domains should be decoupled close to their respective pins rather than relying on remote bulk capacitors. Typical uses include dual-port network access equipment, secure edge gateways, industrial Ethernet controllers, smart-grid communications equipment, video-network endpoints, and cloud-facing communications systems. Selection should account for the required GMII, SerDes, SPI, or TBI host interface, media support, security features, thermal exposure, and the manufacturing complexity of the 256-PBGA footprint. A principal design trade-off is integration versus package complexity. The device consolidates two Gigabit Ethernet physical layers into one 256-pin PBGA, reducing board-level PHY count, but demanding fine-pitch assembly, careful layer planning, and accurate high-speed layout. Confirm every power, ground, reference-clock, reset, and serial interface connection against the Microchip pin-description table before fabrication. This product page consolidates the confirmed package, temperature, voltage, interface, and application characteristics of the VSC8582XKS-09 with practical PCB guidance and a focused comparison of same-family ordering options. It is intended to help engineers identify the correct PHY variant and prepare a production-ready 256-PBGA board design.

RFQ Kontak
VSC8582XKS-10 - Dual-Port Gigabit Ethernet PHY | Microchip
VSC8582XKS-10

VSC8582XKS-10 - Dual-Port Gigabit Ethernet PHY | Microchip

The Microchip Technology VSC8582XKS-10 is a dual-port Gigabit Ethernet physical layer transceiver with support for 10/100/1000BASE-T copper connections, fiber interfaces, IEEE 1588 timing, and QSGMII or SGMII MAC connectivity. It provides 4 ns-class timing performance and 128/256-bit interface options in a lead-free package. A Gigabit Ethernet PHY is the physical-layer component that converts digital network data into electrical signaling for copper or optical media and converts received signaling back into data for the MAC and host system. In the product hierarchy, the VSC8582 belongs to Ethernet interface ICs, then network interface controllers, then integrated interface semiconductors. Integrating two Gigabit ports in one device reduces the component count and simplifies control of paired copper-and-fiber network links. Key features include two Gigabit Ethernet ports, support for 10BASE-T, 100BASE-TX, and 1000BASE-T operation, IEEE 1588 precision timing, and QSGMII/SGMII MAC connectivity. The device also incorporates Microchip Intellisec security capabilities and VeriTime timing technology, as identified by the manufacturer. Its 4 ns timing specification supports high-speed packet-processing environments where deterministic network timing matters. The VSC8582 architecture connects each Ethernet port to an external MAC through high-speed serial or quad serial interfaces. QSGMII provides four parallel Gigabit channels, while SGMII carries one Gigabit channel over a serial link. This flexibility lets designers select the MAC interface appropriate to the switch, router, or endpoint controller while retaining shared copper-and-fiber front ends. Typical uses include enterprise access switches, industrial Ethernet equipment, smart-grid infrastructure, video-network endpoints, cloud-network appliances, and secure communications systems. The dual copper/fiber arrangement is especially useful for equipment that must bridge traditional copper LAN ports and fiber uplinks without relying on separate physical-layer devices. A primary design consideration is matching the MAC clocking, SerDes, and reference-clock architecture to the selected QSGMII or SGMII interface. The manufacturer datasheet should be used to assign power, ground, clock, reset, management, and media-side connections before PCB routing. Decoupling, controlled clock distribution, and high-speed differential return paths are essential for reliable operation. This product page combines the exact VSC8582XKS-10 ordering information, verified technical attributes, interface-use guidance, and clearly bounded drop-in comparison information. It also distinguishes directly documented variants from similarly named devices that cannot be assumed to be replacements.

RFQ Kontak
VSC8584XKS-05 Quad-Port GbE PHY | Microchip Technology
VSC8584XKS-05

VSC8584XKS-05 Quad-Port GbE PHY | Microchip Technology

The Microchip Technology VSC8584XKS-05 is a four-port Gigabit Ethernet PHY with copper and fiber support, (Q)SGMII interfaces, Intellisec security, and VeriTime timing in a 256-PBGA package. It consolidates four network interfaces into one high-density device for cloud infrastructure, enterprise networking, industrial communications, smart-grid equipment, video systems, and secure government communications. A Gigabit Ethernet physical-layer transceiver, or GbE PHY, converts digital data into electrical or optical signaling used by network equipment. The VSC8584 belongs to the broader Ethernet interface hierarchy, where it works with a network controller or switching fabric. Copper ports support equipment using twisted-pair Ethernet, while fiber-oriented connectivity allows the same family to serve longer-distance or optical backplane links. Intellisec adds security-oriented PHY features, and VeriTime provides timing capabilities for demanding synchronization applications. The primary distinguishing specifications are four integrated Gigabit Ethernet ports, support for copper and fiber connections, and (Q)SGMII host interfacing. The device is packaged in a 256-PBGA, 17 x 17 mm package intended for advanced multilayer PCB designs. Its four-port integration reduces the number of separate PHY devices required by a quad-port network appliance, while the BGA package supports dense routing between processors, switches, optical modules, and line cards. The VSC8584 family combines Ethernet media access with security and precision-timing functions rather than functioning as a general-purpose microcontroller or standalone switch. Its architecture is tailored to communications equipment requiring multiple Gigabit Ethernet channels, deterministic network timing, and hardware-assisted link security. Because this is a high-pin-count mixed-signal communications IC, final signal integrity, thermal performance, and layer-1 compatibility depend on careful reference-design implementation, controlled clocking, suitable power delivery, and high-quality PCB layout. Typical applications include cloud network appliances, e-commerce and database servers, collaboration platforms, enterprise access equipment, smart-grid controllers, professional video systems, and government communications infrastructure. These systems benefit from the density of four PHYs in one package and the combination of security, timing, copper, and fiber connectivity. The manufacturer identifies the VSC8584 as suitable for these cloud-network, enterprise, industrial, video, and public-sector applications. Designers should follow the manufacturer datasheet for the exact 256-ball signal assignment, reference clock requirements, power rails, decoupling, differential-pair routing, and exposed-pad implementation. Layer-1 validation should include insertion loss, return loss, crosstalk, jitter, link training, and compliance testing across every supported copper or fiber media path. Firmware and host-interface configuration must also be checked against the exact VSC8584 revision represented by this orderable suffix. This page organizes the manufacturer product information, distributor records, package identity, family variants, application guidance, and selection considerations into a design-oriented reference. It also identifies the exact information that an engineer should confirm in the manufacturer datasheet before releasing a new high-speed multilayer PCB.

RFQ Kontak
VSC8584XKS-06 - Quad-Port GbE PHY | Microchip Technology
VSC8584XKS-06

VSC8584XKS-06 - Quad-Port GbE PHY | Microchip Technology

The Microchip Technology VSC8584XKS-06 is a quad-port Gigabit Ethernet physical-layer transceiver designed for secure enterprise, cloud, industrial, and communications networks. It integrates four GbE channels, Intellisec security features, and VeriTime timing capabilities in a 256-ball BGA package. The -06 ordering variant is associated with a 17 mm × 17 mm package arrangement, providing a high pin-count solution for multilayer PCB designs. A Gigabit Ethernet PHY is a semiconductor in the interface-IC hierarchy that converts serialized digital data into electrical signaling suitable for copper Ethernet links. The VSC8584 combines four physical-layer channels with packet-processing, timing, and security functions, allowing a single device to serve multiport switches, routers, network-interface equipment, and industrial Ethernet systems. Intellisec supports secure network deployment, while VeriTime provides timing capabilities for time-aware networking applications. The device offers four integrated Gigabit Ethernet ports, making it suitable for designs that require multiple network links without using four separate PHY packages. Its 256-BGA package minimizes the PCB footprint relative to multiple discrete transceivers, but its 256-ball land pattern requires careful escape routing, multilayer construction, controlled impedance, and assembly-process control. The -06 suffix identifies the specific Microchip ordering configuration and should not be treated as a generic interchangeable designation without reviewing the device documentation and qualification information. According to the manufacturer product page, the VSC8584 is positioned for cloud network applications including e-commerce, databases, collaboration platforms, smart-grid equipment, video systems, and enterprise or government communications. Its integrated Intellisec functions address the growing need for link-level security and controlled network access, while VeriTime adds precision timing functions for synchronized industrial and communications networks. Typical uses include aggregation switches, compact network appliances, industrial routers, server-access controllers, smart-grid gateways, video-network equipment, and secure enterprise Ethernet equipment. In multiport designs, four integrated channels can reduce board area and simplify synchronization compared with several discrete PHY devices. However, thermal management, high-speed layer-transition return loss, magnetics integration, and firmware support must be evaluated together before deployment. PCB implementation should follow the manufacturer's land pattern and reference design closely. A multilayer PCB with a solid ground plane, short high-speed differential pairs, continuous return paths, and controlled impedance is essential for reliable 10BASE-T, 100BASE-TX, and 1000BASE-T performance. Decoupling should be placed directly at the power pins, while Ethernet magnetic components and surge-protection paths should be designed for the maximum interface voltages encountered in the target installation. This product page consolidates the manufacturer positioning, exact package information, ordering variants, sourcing status, and verified cross-reference results into one engineering reference. It also identifies the practical limits of currently published information: the detailed electrical characteristics, complete 256-ball pin map, lifecycle-specific qualification, and quantitative comparison of each ordering suffix should be confirmed in the official device documentation before schematic release or production procurement.

RFQ Kontak
VSC8584XKS-08 - Quad-Port GbE PHY | Microchip Technology
VSC8584XKS-08

VSC8584XKS-08 - Quad-Port GbE PHY | Microchip Technology

The Microchip Technology VSC8584XKS-08 is a quad-port Gigabit Ethernet physical-layer transceiver, or GbE PHY, with Intellisec and VeriTime capabilities in a 256-pin PBGA package. It integrates four Gigabit Ethernet PHY channels and is positioned for secure cloud-network equipment, enterprise communications, databases, smart-grid systems, video infrastructure, e-commerce platforms, and government communications. Its combination of multichannel integration and network-security features makes it suitable for designs requiring multiple copper Ethernet connections in a compact component. A Gigabit Ethernet PHY is the physical-layer interface between a network controller or switching silicon and external copper cabling. It converts transmitted data into signals suitable for the physical network and receives and reconstructs incoming signals. As part of the Ethernet hierarchy, the PHY operates below the network controller and above the physical medium. The VSC8584 family therefore belongs to the broader categories of Ethernet interface IC, communications semiconductor, interface IC, and networking semiconductor. The VSC8584 integrates four GbE channels rather than implementing only one physical port. This architecture can simplify board partitioning by reducing the number of separate Ethernet PHY packages required in multiport gateways, servers, and industrial communication equipment. Intellisec adds a security-oriented capability for protecting network communications, while VeriTime provides timing-related functionality for systems where deterministic network behavior and synchronization matter. The exact protocol, clocking, and operating limits should be confirmed against the manufacturer documentation for the selected ordering code. Multiple ordering suffixes identify different VSC8584 configurations or silicon revisions. Results for VSC8584XKS-10, VSC8584XKS-11, VSC8584XKS-13, and VSC8584XKS-14 show that the series is offered in a 256-PBGA package, but suffix-dependent features and timing behavior must be checked before interchange. Microchip application note VPPD-04110 explains that VSC8584XKS-11 and VSC8584XKS-14 devices use high-resolution timing circuitry in the IEEE 1588 engine, with ±4 ns accuracy when recommended software API 4.66 or later is used. Typical uses include enterprise access equipment, cloud-network gateways, industrial Ethernet switching, smart-grid communications, video-network aggregation, and multiport embedded systems. The four integrated channels can reduce connector and routing complexity when the design requires four copper ports. PHY integration should not be confused with a complete Ethernet switch: system-level behavior also depends on the selected network controller or switch ASIC, magnetics, connector layout, firmware, and signal-integrity implementation. The main PCB consideration is the demanding 256-pin PBGA land pattern. Follow the manufacturer land pattern, ball assignment, and reference layout exactly; confirm escape-routing and via-in-pad rules with the package documentation. Keep the high-speed copper routes short, provide continuous reference planes, control impedance, and account for magnetics and connector placement in the channel-budget study. This page combines manufacturer application positioning, family-level ordering information, package context, and a structured comparison of documented VSC8584 variants. It also identifies which functions, electrical ratings, pin assignments, and lifecycle terms require confirmation from the exact VSC8584XKS-08 manufacturer documentation before a production release.

RFQ Kontak
VSC8601XKN Gigabit Ethernet PHY | Microchip Technology
VSC8601XKN

VSC8601XKN Gigabit Ethernet PHY | Microchip Technology

The Microchip Technology VSC8601XKN is a single-channel Gigabit Ethernet PHY transceiver with an RGMII MAC interface, supporting 10BASE-T, 100BASE-T, and 1000BASE-T operation. The device is offered in a 64-LQFP exposed-pad package measuring 10 mm by 10 mm, providing a high-density interface solution for Ethernet-connected embedded systems. A Gigabit Ethernet physical-layer transceiver, commonly called a Gigabit Ethernet PHY, converts between digital MAC-layer data and analog signals carried over twisted-pair cabling. Within the network hierarchy, the PHY sits beneath the Ethernet MAC controller and connects a digital processor or SoC to a 10/100/1000BASE-T network. Its RGMII interface provides a parallel digital connection between the PHY and the MAC while the integrated transceiver handles the physical network medium. The VSC8601XKN combines 10 Mb/s, 100 Mb/s, and 1 Gb/s operation in one PHY. The listed package is a 64-LQFP-EP configuration in a 10 mm by 10 mm outline, giving the device 64 numbered connections plus an exposed thermal pad. Search listings also identify the part as Pb-free and as a one-driver, one-receiver transceiver. These characteristics make it suitable for compact industrial, networking, test, and embedded Ethernet equipment. Operation requires both digital and analog power rails. The available technical listings identify 1.2 V and 3.3 V operation, while another listing describes 2.5 V and 3.3 V supply conditions. The exact rail assignment, tolerance range, and sequencing requirements must be taken from the manufacturer datasheet before schematic capture. The exposed pad requires careful PCB thermal design because it provides an important heat-transfer path from the device to the board. Typical uses include industrial Ethernet controllers, network switches, network interface cards, embedded gateways, communications equipment, and test systems requiring access to copper Ethernet networks. The RGMII MAC interface makes the PHY appropriate where a host processor already implements the Ethernet MAC function. At 1 Gb/s, however, signal integrity, trace length, connector layout, return-loss requirements, and magnetic-component selection remain important parts of the complete Ethernet design. During layout, follow the pin-description table, recommended decoupling network, and reference layout in the manufacturer datasheet. Place high-frequency and sensitive transceiver connections away from noisy digital and switching-regulator paths, provide a low-impedance ground plane, and connect the exposed pad to the intended ground structure with an appropriate via pattern. Confirm the exact RGMII voltage levels and trace constraints before routing, because interface timing and topology are not interchangeable across PHY implementations. This product page consolidates the confirmed device identity, package, supported Ethernet rates, interface type, power-supply information, sourcing data, and engineering guidance for the VSC8601XKN. It also distinguishes true pin-compatible replacements from merely functional Gigabit Ethernet PHY alternatives, helping engineers make PCB-level replacement decisions without confusing similar protocol support with drop-in compatibility.

RFQ Kontak
VSC8641XJF - 1-Port GbE Copper PHY with RGMII/GMII | Microchip
VSC8641XJF

VSC8641XJF - 1-Port GbE Copper PHY with RGMII/GMII | Microchip

The Microchip Technology VSC8641XJF is a single-port 10/100/1000BASE-T Gigabit Ethernet copper PHY with RGMII and GMII MAC interfaces, operating from 2.5 V and 3.3 V supply rails in an 88-pin QFN package with an exposed thermal pad. A PHY (Physical Layer transceiver) is the lowest layer of an Ethernet link. It converts parallel digital MAC data into differential copper signalling for twisted-pair cabling, and recovers clock and data from the received analogue waveform. In the OSI-style hierarchy, a PHY sits below the data link layer and the MAC controller: MAC -> PHY -> transformer -> twisted pair. Because the VSC8641XJF integrates the analogue front end, line drivers, comparators, clock recovery and digital interface logic on one die, it removes the discrete magnetics interface complexity that would otherwise dominate a copper Ethernet port design. Key features of the VSC8641XJF include a 1/1 driver-receiver configuration in a PHY transceiver, support for all three copper speeds (10, 100 and 1000 Mb/s) on a single port, full-duplex operation, and both RGMII and GMII MAC-side interfaces so it can attach to a wide range of switching silicon. The device runs from 2.5 V and 3.3 V supplies and is offered in an 88-VFQFN exposed-pad package suitable for surface-mount assembly and copper-heat-spreader land patterns. Architecturally the device is a low-power, highly integrated Gigabit PHY originally developed by Vitesse Semiconductor and now maintained by Microchip Technology. It is intended to pair with a separate MAC or switch ASIC over RGMII, which keeps the digital interconnect short and low-cost relative to integrating a full switch fabric on the same die. The exposed pad in the package provides the thermal path for the analogue and clocking sections during continuous 1000BASE-T operation. Typical end applications include standalone copper-to-fibre media converters, industrial and telecom access equipment, IP cameras and surveillance front ends, set-top and access gateways, and single-port Ethernet links embedded in test and measurement instruments. Any design that needs one deterministic, low-latency 1000BASE-T copper port with a selectable MAC interface benefits from the device. When designing around the VSC8641XJF, remember that the exposed pad must be tied to the ground plane and the MAC interface timing must be budgeted against the RGMII/GMII specification, since the PHY does not include the packet buffer that an integrated switch would provide. Because the device is listed by the manufacturer as not recommended for new designs, confirm lifecycle and support status before committing to a long production program. This page consolidates manufacturer and distributor documentation, parameter comparisons and drop-in alternatives into one engineering reference, adding design notes, thermal and layout guidance and parameter-by-parameter comparison tables that are not available on a single distributor listing.

RFQ Kontak
VSC8641XKO - Gigabit Ethernet PHY | Microchip | 100-LQFP
VSC8641XKO

VSC8641XKO - Gigabit Ethernet PHY | Microchip | 100-LQFP

The Microchip Technology VSC8641XKO is a single-port Gigabit Ethernet physical-layer transceiver for copper Ethernet links, supplied in a 100-LQFP package. The device operates from 2.5 V and 3.3 V supply rails and provides one integrated transceiver for Gigabit Ethernet designs using GMII or RGMII host interfaces. Its package is identified as 100-LQFP, while the ordering code XKO is associated with tray packaging in the component listing. A Gigabit Ethernet PHY is the physical-layer component that converts digital Ethernet data into electrical signaling for a twisted-pair cable and reconstructs incoming signaling into data for the network controller or communications processor. Within the Ethernet hierarchy, the VSC8641XKO sits between a MAC or switch fabric and the physical network medium. It is therefore relevant to industrial Ethernet equipment, network appliances, access systems, and embedded communications platforms that require a 1 GbE copper-network interface. The VSC8641 family is described by Vitesse Semiconductor as being designed for high-performance, low-power, and low-cost Gigabit Ethernet PHYs. The family combines a highly integrated GbE PHY with support for both GMII and RGMII connectivity, allowing the host interface to be selected according to processor pin availability and clocking requirements. The exact transceiver thresholds, internal reference requirements, latency, cable reach, and operating-temperature limits should be confirmed against the VSC8641 manufacturer datasheet before a circuit is released. For implementation, the VSC8641XKO requires a carefully designed Ethernet magnetics path, controlled clocking, suitable supply decoupling, and a PCB layout that preserves the high-speed differential signals. The 100-LQFP package provides many power, ground, analog, and digital interface connections, so its pin assignment and exposed routing requirements must be followed directly from the manufacturer pin-description table. Commercial availability and lifecycle decisions should also be reconfirmed with Microchip. Typical applications include industrial routers, network-interface controllers, Ethernet switches, embedded gateways, set-top equipment, and communications modules requiring a compact 1 GbE PHY. Because the VSC8641XKO is a dedicated interface device rather than a general-purpose processor, its value lies in reducing PHY implementation effort while preserving the flexibility of GMII or RGMII attachment to a host controller. This product overview combines the exact orderable MPN, package information, supply information, interface description, source links, and engineering guidance to support initial design evaluation. Use the Request a Quote form on this page for current commercial conditions, and verify lifecycle status, pin functions, electrical limits, and recommended magnetics against the current manufacturer documentation before production release.

RFQ Kontak
VSC8641XKO-03 - 1-Port Gigabit Ethernet PHY | Microchip
VSC8641XKO-03

VSC8641XKO-03 - 1-Port Gigabit Ethernet PHY | Microchip

The Microchip Technology VSC8641XKO-03 is a single-port Gigabit Ethernet copper PHY supporting GMII and RGMII interfaces in a 100-lead low-profile quad flat package. It is designed for industrial-temperature equipment operating from -40 C to +85 C and uses a 1.2 V, 2.5 V, or 3.3 V supply arrangement indicated for this device family. The package is a lead-free 12 mm by 12 mm component with a 0.55 mm pitch. A Gigabit Ethernet physical layer, commonly called a GbE PHY, converts between digital data and signals traveling over twisted-pair copper cabling. Within a network interface hierarchy, the VSC8641XKO-03 is a physical-layer device that sits below the link-layer MAC controller. Its GMII and RGMII interfaces connect the PHY to a network controller, while the copper-side transceiver provides the physical signaling required for 1000BASE-T Ethernet. The part is identified as a 1-port GbE PHY with GMII and RGMII support. A 12 mm by 12 mm lead-free package permits compact single-port designs without using a larger heat-spreader package. The industrial-temperature marking supports designs deployed in factory equipment, industrial controls, telecommunications equipment, and test systems where extended temperature capability may be required. The VSC8641 family is documented as a highly integrated, low-power Gigabit Ethernet PHY solution. Integration reduces the number of external components required around the MAC interface and copper transceiver, while support for both GMII and RGMII lets the same PHY family serve controllers with parallel or reduced-pin serial interfaces. Exact clock, power-consumption, and link-performance figures should be taken from the VSC8641 manufacturer datasheet. Typical applications include industrial Ethernet switches, network interface cards, embedded Linux systems, factory automation controllers, telecommunications access equipment, and copper media converters. The PHY is most appropriate when a system already contains a compatible Ethernet MAC and only the physical layer, line drivers, receiver, and copper interface are required. The Microchip product page lists the VSC8641 as not recommended for new designs. Confirm the exact orderable suffix, PCB footprint, reference clock requirements, magnetics selection, and interface timing against the manufacturer datasheet before committing a new layout. Because the PHY connects to external magnetics and a line driver, use the manufacturer reference schematic and layout guidance for trace matching, grounding, and isolation spacing. This page organizes the package, interface, lifecycle, and sourcing information for VSC8641XKO-03, compares the closely related family members, and provides application-focused engineering guidance. It also distinguishes true pin-compatible replacements from devices that are only functional alternatives requiring a different package or board redesign.

RFQ Kontak
VSC8658XHJ - Octal Gigabit Ethernet PHY | Microchip
VSC8658XHJ

VSC8658XHJ - Octal Gigabit Ethernet PHY | Microchip

The Microchip Technology VSC8658XHJ is an octal Gigabit Ethernet transceiver with eight copper 10/100/1000BASE-T ports and integrated 100BASEFX/1000BASE-X SerDes capability. It includes two fully integrated 1.25 G SerDes interfaces and is packaged in a 444-BGA package measuring 27 x 27 mm. The device is intended primarily for space-constrained, multiport networking equipment. An Ethernet transceiver combines physical-layer and interface functions within an Ethernet communication system. The physical layer converts logical data into electrical or optical signaling, while the associated SerDes interface transfers data between parallel PHY functions and a network processor or switch ASIC. VSC8658XHJ belongs to the transceiver hierarchy that supports copper and fiber media in a single multiport design. The principal feature set includes eight Gigabit Ethernet channels, support for 10/100/1000BASE-T copper operation, 100BASEFX and 1000BASE-X fiber operation, and two 1.25 G SerDes interfaces. This combination allows one transceiver to support both electrical and optical network ports, reducing the number of external physical-layer devices in suitable switch, router, and industrial networking designs. The VSC8658 architecture integrates eight Gigabit Ethernet PHYs with dual SerDes connectivity in one compact ball grid array package. Integration can simplify board partitioning by bringing copper and fiber media interfaces into one device. The 27 x 27 mm 444-BGA format nevertheless requires careful escape routing, power-plane planning, high-speed return-path management, and thermal verification during PCB implementation. Typical uses include multiport switches, routers, aggregation equipment, and industrial Ethernet systems. A copper-focused design can use the 10/100/1000BASE-T channels directly, while a fiber uplink can use 100BASEFX or 1000BASE-X through the integrated SerDes path. Network processors and switching ASICs require compatible link interfaces, clocking, and reference circuitry to operate with the PHY correctly. For PCB design, follow the manufacturer’s package, reference-design, layout, and decoupling instructions rather than routing high-speed links from general package conventions. Ball-grid-array escape routing, power delivery, thermal management, and high-speed SerDes return paths require constraint-driven layout and measurement-based verification. This page organizes the identified device capabilities with application guidance, engineering considerations, a parameter comparison framework, and sourcing information. It distinguishes the VSC8658 family-level functions from the exact XHJ ordering code and helps designers confirm package, media, lifecycle, and procurement requirements before schematic capture.

RFQ Kontak
VSC8662XIC - 2-Port Gigabit Ethernet PHY | Microchip Technology
VSC8662XIC

VSC8662XIC - 2-Port Gigabit Ethernet PHY | Microchip Technology

The Microchip Technology VSC8662XIC is a two-port Gigabit Ethernet copper and fiber PHY designed for Synchronous Ethernet and telecommunications equipment. It provides 10/100/1000 Base-T connectivity, support for optical-fiber links, cable diagnostics, programmable LED indication, and SyncE timing functions in a 256-BGA package measuring 17 mm by 17 mm. The industrial-temperature variant is identified by the XIC suffix. An Ethernet physical-layer transceiver, or PHY, converts between digital Ethernet data and electrical or optical signaling at the physical layer. The VSC8662 belongs to the Gigabit Ethernet transceiver hierarchy, combining copper and fiber interfaces in one network-facing device. It sits between a network processor, switch, or communications equipment and external copper or fiber links, while adding synchronization capabilities for carrier-grade timing-sensitive networks. Key features include two Gigabit Ethernet PHY ports, copper and optical-fiber support, cable diagnostics, programmable LED indication, and Synchronous Ethernet support. The SyncE function provides traceable timing across TDM backhaul links and cellular base-station networks. The 256-ball BGA package supports dense telecommunications and networking designs, while its industrial-temperature qualification makes it suitable for equipment expected to operate outside consumer-temperature environments. The VSC8662 integrates both copper and fiber connectivity in one package, reducing the need for separate physical-layer devices in mixed-media network equipment. Its cable-diagnostics capability helps installation and maintenance teams identify wiring faults, while programmable LEDs simplify board-level status monitoring. SyncE support distinguishes the device from basic Gigabit Ethernet PHYs designed only for data transfer. Typical uses include cellular base stations, TDM backhaul equipment, access networks, aggregation platforms, and industrial Ethernet gateways. In these systems, the PHY can connect network processors to copper uplinks while providing a fiber interface for longer-distance links. The synchronized timing functions are particularly useful where backhaul traffic must maintain traceable network timing. Design with the manufacturer datasheet as the authority for ball assignments, electrical limits, transceiver initialization, media-dependent-interface behavior, and recommended magnetics or optical components. High-speed differential routing, controlled reference planes, solid power distribution, and compliance testing remain essential in a 256-BGA Ethernet PHY design. This product overview combines manufacturer positioning, distributor identification, package details, and application guidance with practical design considerations for engineers evaluating the VSC8662XIC in copper, fiber, and Synchronous Ethernet equipment.

RFQ Kontak
VSC8664EV - 4-Port Gigabit Ethernet PHY | Microchip Technology
VSC8664EV

VSC8664EV - 4-Port Gigabit Ethernet PHY | Microchip Technology

The Microchip Technology VSC8664EV is a four-port Gigabit Ethernet PHY with copper and fiber connectivity, dual recovered-clock outputs, and support for carrier-quality Synchronous Ethernet. According to the manufacturer product page, it is the industry's first PHY with dual recovered clock outputs, helping equipment designers distribute traceable timing across TDM backhaul links, cellular base stations, and other Synchronous Ethernet systems. The verified package designation and complete electrical interface details are not available in the supplied data, so this page does not assign an unverified package or pin configuration. A Gigabit Ethernet physical-layer transceiver, or PHY, is the semiconductor layer that converts logical data into electrical or optical signaling for a high-speed Ethernet link. In the networking hierarchy, a PHY belongs to the Ethernet interface IC family, operates below the MAC and switch layers, and connects copper or fiber media to a digital network controller. The VSC8664EV combines four Gigabit Ethernet ports with timing-recovery functions intended for infrastructure equipment requiring deterministic synchronization. The principal verified feature is the pair of recovered-clock outputs. These outputs allow a system to derive timing from incoming Ethernet traffic and distribute that recovered reference to other blocks. The Microchip product brief states that this approach meets and goes beyond the requirements of ITU-T Recommendation G.8261/Y.1361. This is especially relevant to mobile fronthaul and backhaul systems in which recovered timing must remain traceable across multiple network elements. The VSC8664 family supports copper and fiber media through four ports, allowing equipment designers to consolidate otherwise separate Ethernet interfaces. Its multiport integration can reduce board area and simplify synchronization distribution compared with a design assembled from discrete single-port PHYs. However, media reach, insertion loss, optical-interface details, power consumption, operating temperature, and package dimensions cannot be stated without additional manufacturer documentation. Typical VSC8664EV applications include Synchronous Ethernet access equipment, cellular base-station backhaul, TDM-to-Ethernet transport systems, and carrier Ethernet gateways. In these systems, the four integrated ports can connect multiple network interfaces while the two recovered clocks provide timing references to aggregation, switching, or line-card electronics. Copper and fiber support can also reduce adapter complexity when equipment must accommodate different deployment media. The primary design consideration is timing integrity. Engineers should preserve the recovered-clock routing specified by the manufacturer and account for clock jitter, isolation, trace impedance, and return paths on the PCB. Supply rails and optical or copper channel implementations must follow the complete datasheet because detailed schematic, capacitor, layout, and power-sequence requirements are not present in the verified source set supplied for this record. This product record combines verified manufacturer capabilities, distributor availability information, pricing-status disclosures, interface-classification context, and engineering-oriented application analysis. It also distinguishes confirmed parameters from missing data, allowing procurement and hardware teams to evaluate the VSC8664EV without mistaking an unverified package, pinout, or electrical limit for a guaranteed specification.

RFQ Kontak
VSC8664XIC - Quad 1.25Gbps Ethernet PHY | Microchip
VSC8664XIC

VSC8664XIC - Quad 1.25Gbps Ethernet PHY | Microchip

The Microchip Technology VSC8664XIC is a quad-port 10/100/1000BASE-T Ethernet physical-layer transceiver with support for 10 Mbps, 100 Mbps, and 1 Gbps operation. The device also provides 100BASE-FX capability, dual recovered-clock outputs for Synchronous Ethernet, and a 1.25 Gbps-per-port serialization rate in a 256-pin PBGA package. Its commercial temperature range is 0°C to +70°C. An Ethernet PHY is an interface IC that converts digital data into signals suitable for transmission over copper or fiber media while receiving and recovering data from those media. The VSC8664XIC belongs to the PHY hierarchy within Ethernet interface ICs, where a physical-layer transceiver works alongside a MAC, switch, processor, and physical connector. Its four-channel architecture consolidates multiple copper and fiber links into one high-density network-interface device. The primary feature set includes four 10/100/1000BASE-T ports, 100BASE-FX support, and dual recovered-clock outputs. According to the Microchip VSC8664 product page, the recovered clocks support carrier-quality Synchronous Ethernet, or SyncE. This feature is useful where network equipment must derive timing from the Ethernet physical layer for synchronous packet transport rather than relying exclusively on a separate asynchronous clock source. Each channel supports a maximum serialization rate of 1.25 Gbps, allowing 1 Gbps Ethernet payload operation with line-rate encoding overhead. The quad-port organization makes the device suitable for multi-port edge equipment, access systems, industrial Ethernet switches, and network interface controllers requiring several copper links plus optical connectivity. A common package also simplifies board routing for multi-channel designs compared with several discrete PHY devices. Typical applications include carrier Ethernet equipment, industrial network gateways, multi-port Ethernet controllers, telecommunications access hardware, and rack-mounted or embedded systems requiring 1 Gbps copper links with optional fiber backhaul. The 256-pin PBGA footprint is appropriate for multilayer PCB layouts where dense power, ground, high-speed signal, and control connectivity can be routed with short connections. The principal design consideration is that this device is a high-pin-count mixed-signal and high-speed communications component. Its 256-pin PBGA requires careful layer-stack selection, via-in-pad or via-array construction, local power-plane distribution, and strict impedance control for each high-speed copper interface. Differential pairs should be routed as controlled-impedance nets, with return paths kept continuous and noisy digital or switching circuitry separated from PHY clock and analog domains. This page combines the manufacturer’s functional description, exact orderable package information, temperature range, source listings, and practical PCB guidance into a design-oriented reference for engineers evaluating the VSC8664XIC. It also distinguishes the available same-family hardware option from unverified cross-brand substitutes, helping procurement teams avoid assuming that similar Ethernet PHYs are drop-in replacements.

RFQ Kontak
VSP3200Y - 16-Bit 8MSPS CCD Signal Processor | TI
VSP3200Y

VSP3200Y - 16-Bit 8MSPS CCD Signal Processor | TI

The Texas Instruments VSP3200Y is a 16-bit, 8 MSPS, 3-channel analog front end (AFE) CCD signal processor with dual output mode, housed in a 48-pin LQFP (7x7 mm) package and operating from a single +5V supply. A CCD/CIS analog front end is the mixed-signal stage between an image sensor and a digital image processor. It samples tiny charge-derived pixel voltages, removes reset and kTC noise through correlated double sampling (CDS), amplifies the signal to match the ADC input range, and digitizes it. Within the signal chain hierarchy, the AFE sits between the sensor and the image-signal processor, and is a critical determinant of final image dynamic range and noise floor. Key features include an integrated triple correlated double sampler (CDS), a programmable gain amplifier with up to +13 dB gain, selectable operating modes (1-channel or 3-channel CCD mode at up to 8 MSPS), selectable normal or demultiplexed output modes, and an offset control range of +3V. The 16-bit conversion resolution preserves fine shadow detail in scanned images, essential for document and film scanners. Architecturally, the VSP3200 combines three CDS/PGA channels feeding a 16-bit ADC pipeline optimized for line-rate scanning. The demultiplexed output mode makes the device interface compatible with the VSP3210, which is pin-to-pin compatible with the VSP3100 in that mode, providing a migration path to a one-chip solution. Typical applications include flatbed document scanners, film scanners, CIS-based scanner modules, and industrial inspection cameras that use CCD or CIS sensors. Design consideration: because the part runs from a single +5V rail, keep the analog 5V supply clean and well decoupled; noise on this rail directly appears in pixel data at 16-bit resolution levels. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Kontak
VSP3200Y-2K - 16-Bit 8MSPS CCD Signal Processor | Texas Instruments
VSP3200Y-2K

VSP3200Y-2K - 16-Bit 8MSPS CCD Signal Processor | Texas Instruments

The Texas Instruments VSP3200Y-2K is a 16-bit, 8 MSPS, 3-channel analog front end (AFE) signal processor for CCD, CMOS, and CIS image sensors, housed in a 48-pin LQFP (7x7 mm) package and operating from a single +5V supply. An analog front end for image sensors is the circuit block between the imaging array and the digital image processor. It performs correlated double sampling (CDS) to remove reset noise and kTC noise from the CCD output, applies programmable gain to normalize signal amplitude across color channels, and digitizes the conditioned signal with a high-resolution ADC. Within the system hierarchy, the AFE sits inside the imaging signal chain: image sensor -> AFE (CDS + PGA + ADC) -> DSP/ASIC -> host interface. Key features of the VSP3200Y include three Correlated Double Samplers (CDSs) and three Programmable Gain Amplifiers (PGAs) that process CCD signals from 3-channel (RGB) scanners, a 16-bit conversion path running at up to 8 MSPS, dual output mode for flexible host interfacing, and single +5V operation that simplifies power tree design in desktop scanner platforms. Technically, the VSP3200Y integrates the complete analog processing chain for CCD signal conditioning: the CDS stages sample the pixel signal twice to cancel low-frequency drift and reset noise, the PGAs allow per-channel gain calibration, and the internal 16-bit ADC delivers 8 Msps throughput. Interface compatibility with the VSP3210 single-chip product, which is itself pin-to-pin compatible with the VSP3100 in demultiplexed output mode, provides a migration path for higher integration designs. Typical applications are flatbed and document scanners using CCD or CIS linear arrays, industrial inspection cameras, and desktop imaging peripherals that require 16-bit depth at moderate 8 MSPS speeds. A key design consideration is layout of the analog ground and the CCD output trace: keep the sensor-to-CDS input path short, guard it from digital output drivers, and provide a clean +5V rail with local decoupling, because residual reset noise not removed by the CDS directly limits the effective 16-bit resolution. This page synthesizes distributor inventory, drop-in alternatives, pricing tiers, and practical design notes not found in the manufacturer datasheet.

RFQ Kontak
VSP3200Y-2KG4 - 16-Bit 8MSPS CCD Signal Processor | TI
VSP3200Y-2KG4

VSP3200Y-2KG4 - 16-Bit 8MSPS CCD Signal Processor | TI

The Texas Instruments VSP3200Y-2KG4 is a 16-bit, 8 MSPS 3-channel analog front end (AFE) signal processor for CCD, CMOS and CIS image sensors, housed in a 48-pin LQFP (7x7 mm) package and operating from a single +5 V supply over 0C to +85C. An analog front end for image sensors is a specialized data-conversion IC that sits between a charge-coupled device (CCD) sensor and the digital image pipeline. It performs correlated double sampling (CDS) to remove kTC and low-frequency noise, applies programmable gain, offsets the black level, and digitizes the conditioned pixel signal with a high-speed ADC, delivering a clean digital video stream to downstream DSP or image-processing logic. Key features of the VSP3200Y include three independent Correlated Double Samplers (CDS) and three Programmable Gain Amplifiers (PGAs) that process CCD signal channels end-to-end on one chip, a 16-bit ADC running at up to 8 MSPS, and dual output mode for flexible system interfacing. Integration of the complete analog chain eliminates discrete CDS/PGA stages, reducing board area and analog design risk. The device is built on CMOS process technology and provides a serial digital output interface. According to TI product documentation, the VSP3200Y is interface compatible with the VSP3210, a 16-bit one-chip product; the VSP3210 is in turn pin-to-pin compatible with the VSP3100 when operated in demultiplexed output mode, giving designers a documented upgrade and substitution path within the same LQFP-48 family. Typical applications include CCD camera signal chains for industrial inspection, consumer video capture, and contact image sensor (CIS) modules used in scanners and document imaging. The single 5 V supply suits legacy 5 V consumer and industrial boards. When designing with this part, verify power-supply decoupling on both the analog and digital domains and confirm the output mode (multiplexed vs dual) matches the pixel-rate timing of your CCD clocking scheme. This page synthesizes distributor availability, drop-in family alternatives (VSP3210, VSP3200Y, VSP3100), and design considerations not found on the manufacturer product page.

RFQ Kontak
W24257AJ-20 - 32Kx8 20ns CMOS SRAM | Winbond DIP-28
W24257AJ20

W24257AJ-20 - 32Kx8 20ns CMOS SRAM | Winbond DIP-28

The Winbond W24257AJ-20 is a 32,768 x 8-bit high-speed CMOS Static RAM (SRAM) organized as 32K words by 8 bits, with a 20 ns maximum access time and housed in a 28-pin DIP (J-bend) through-hole package. It operates from a single +5 V power supply and is manufactured using Winbond's high-performance CMOS process, delivering low power dissipation typical of CMOS memory. A Static RAM is a type of volatile semiconductor memory that retains data bits as long as power is applied, with no refresh cycle required - in contrast to dynamic RAM (DRAM). SRAM belongs to the memory ICs family within the broader semiconductor hierarchy (SRAM -> volatile memory -> random-access memory -> integrated circuit -> semiconductor). The W24257AJ-20 is a fully asynchronous SRAM with standard JEDEC-compatible pinout for a 32K x 8 organization, allowing direct replacement of legacy 62256-type devices on existing PCBs. Key features of the W24257AJ-20 include a 20 ns access time (suitable for systems clocked up to 50 MHz without wait states), CMOS low standby current, fully static operation (no clock or refresh required), and TTL-compatible I/O levels. The device supports common memory-interface signals such as /CS1, CS2, /OE, and /WE, and provides three-state outputs for bus-oriented applications. The "AJ" suffix denotes the DIP-28 plastic package while "-20" specifies the 20 ns speed grade. Typical applications include legacy industrial controllers, point-of-sale terminals, firmware buffers for embedded microcontrollers, data-logging buffers, and as a working-memory expansion for older 8-bit and 16-bit microprocessor systems. The DIP-28 form factor is convenient for breadboarding, prototyping, and through-hole repair of legacy equipment. Because the part uses the standard 32K x 8 pinout, designers can upgrade older 8K x 8 or 32K x 8 SRAM sockets without any PCB rework. When designing with the W24257AJ-20, observe standard SRAM decoupling practice: place a 0.1 uF ceramic bypass capacitor close to the VCC pin and a bulk 10 uF capacitor on the supply rail. Avoid leaving inputs floating; tie unused /CS1 to VCC through a pull-up and unused /OE to GND to minimize ICC. The 20 ns grade is generally a drop-in replacement for slower 70-200 ns legacy SRAMs on the same PCB, but verify bus timing for high-MHz systems. This page synthesizes Winbond datasheet specifications, distributor stock signals, drop-in replacement candidates, and practical design notes not aggregated on any single distributor page.

RFQ Kontak
W24512AKDV - 64Kx8 5V CMOS SRAM | Winbond
W24512AKDV

W24512AKDV - 64Kx8 5V CMOS SRAM | Winbond

The Winbond W24512AKDV is a 64K x 8 (512 Kbit) high-speed CMOS static RAM organized as 65,536 words of 8 bits, operating from a single 5V power supply. Fabricated on Winbond's high-performance CMOS process, the device offers industry-standard access times of 15/20/25/35 ns (per the W24512A datasheet family), low active power, and CMOS standby current, making it suitable for both high-performance and battery-aware designs. A static RAM (SRAM) is a type of volatile memory that stores each bit in a bi-stable latch, eliminating the need for periodic refresh cycles required by dynamic RAM. In the broader memory hierarchy, SRAM sits between ultra-fast register files and denser but slower DRAM/Flash. The 64K x 8 organization - eight data I/O lines and sixteen address lines - is the classic JEDEC-style parallel SRAM pinout that traces back to the original 6264-family 8K x 8 and is fully pin-compatible with modern asynchronous SRAMs. Key differentiating attributes include fully static operation (no clock or refresh required), TTL-compatible I/O, a chip-enable pin for memory expansion, and an output-enable pin for bus arbitration. The CMOS process delivers typical active currents in the tens of milliamps at full bus activity, with standby leakage dropping into the microamp range when CE is de-asserted - ideal for low-power embedded systems. Architecturally, the W24512AKDV uses a 6-transistor (6T) CMOS memory cell, which gives excellent noise immunity and stable read margins across temperature. The internal address decoders, write drivers, and sense amplifiers are optimized for sub-20 ns access at 5V, ensuring compliance with microprocessor and microcontroller bus timing without wait states in many cases. Typical applications include industrial controllers, data loggers, networking line cards using look-up tables, telecom buffers, point-of-sale terminals, and any embedded system needing byte-wide non-volatile cache/working memory paired with Flash. Engineers retrofitting legacy 5V designs or building new 5V-tolerant industrial equipment will find this part a direct mechanical and electrical substitute for older 6264-style SRAMs. When designing with this part, always place 0.1 uF decoupling capacitors close to VCC and VSS, and observe derating for output loading above 50 pF to stay within the 15/20/25/35 ns access-time envelopes. The CE pin must be pulled inactive for true standby current savings. This page synthesizes current distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet.

RFQ Kontak
W25H02JVTBIM - 2Gb QSPI NOR Flash, 24-TFBGA | Winbond
W25H02JVTBIM

W25H02JVTBIM - 2Gb QSPI NOR Flash, 24-TFBGA | Winbond

The Winbond W25H02JVTBIM is a 2 Gigabit (256M x 8) serial NOR Flash memory in a 24-pin TFBGA (8x6 mm) package, supporting standard SPI, Dual SPI, Quad SPI, QPI, and DTR (Double Transfer Rate) modes. Operating from a single 2.7V to 3.6V supply, it delivers up to 133 MHz clock rate with an equivalent throughput of 416 MHz (50 MB/s) in Quad-SPI/DTR mode. The device uses a standard SPI command set for read, program, and erase, with sector sizes of 4 KB and block sizes of 32 KB and 64 KB for flexible memory management. Background: A NOR Flash memory is a non-volatile storage technology that retains data without power and supports random access (execute-in-place / XIP), making it ideal for code storage and boot media. The QSPI NOR category, to which the W25H family belongs, uses a 4-wire SPI interface that effectively quadruples throughput versus legacy SPI. Within the memory hierarchy, QSPI NOR sits between SRAM (volatile, fast) and NAND Flash (non-volatile, block-oriented, slower random access), serving as fast boot ROM and parameter storage in embedded systems. Key features of the W25H02JVTBIM include uniform 4 KB sector erase, JEDEC standard manufacturer (0xEF) and device ID, hardware and software write protection, individual block and chip erase capability, and a continuous program/erase endurance of 100,000 cycles per sector. The device includes a 256-byte Security Register with OTP lockable bits for unique device identification and parameter storage, and supports single 2.7V-3.6V operation for direct connection to 3.3V MCUs. Architecture: Built on Winbond's proprietary NOR cell technology, the W25H02JVTBIM pairs a 32-bit shift register with an integrated command controller to manage page program (up to 256 bytes per page), sector/block/chip erase, and status register polling. The DTR mode samples data on both clock edges, doubling effective throughput at the same SCK frequency. The package pinout exposes /CS, SCK, IO0-IO3, /WP, /HOLD, VCC, and GND, enabling direct connection to modern MCU QSPI controllers. Typical applications: the W25H02JVTBIM is well suited to network router firmware storage, IoT gateway boot and data logging, set-top box / smart TV boot media, industrial HMI panel image storage, and automotive infotainment reference code where execute-in-place is required. Its 2 Gb density supports full firmware images plus room for OTA staging and asset storage. Design consideration: For systems upgrading from legacy SPI flash, verify that the host MCU's QSPI controller supports DTR mode to realize the full 50 MB/s throughput; otherwise the part still works in single-bit SPI mode. Ensure decoupling caps are placed as close as possible to VCC and GND, and follow Winbond's recommended PCB pad pattern for the 24-ball TFBGA.

RFQ Kontak
W25H02JVTBIMG - 2Gb QSPI NOR Flash, 133MHz DTR, 24-TFBGA | Winbond
W25H02JVTBIMG

W25H02JVTBIMG - 2Gb QSPI NOR Flash, 133MHz DTR, 24-TFBGA | Winbond

The Winbond W25H02JVTBIMG is a 2-Gbit (256M x 8) Serial NOR Flash memory device in the W25H family, housed in a 24-ball TFBGA (8x6 mm) package with industry-standard Quad-SPI and DTR (Double Transfer Rate) capability. It operates from a single 2.7V to 3.6V supply, supports clock rates up to 133 MHz in DTR mode, and delivers an equivalent throughput of 532 Mbit/s (66.5 MB/s) for execute-in-place (XIP) and high-speed code-storage applications. A Serial NOR Flash is a non-volatile memory that fetches code or data serially using a few signal wires instead of a wide parallel bus. Winbond's W25H family extends the popular W25Q Quad-SPI architecture with higher density and DTR support, enabling faster boot times and lower pin-count PCB designs. QSPI NOR Flash sits between raw parallel NOR (high speed, high pin count) and SPI NAND (lower cost, more complex controllers), making it ideal for code shadowing, firmware storage, and data logging in cost-sensitive embedded designs. Key features of the W25H02JVTBIMG include 2 Gbit density organized as 256 Mbytes, support for Standard SPI, Dual-SPI, Quad-SPI, QPI, and DTR modes, an OTP security area of 1024 bytes, individual block/sector protection, and JEDEC standard SFDP (Serial Flash Parameters Table) for parameter discovery. The device is rated for 100,000 erase cycles per sector minimum and 20-year data retention. It supports uniform 4 KB sector erase, 32 KB and 64 KB block erase, and full-chip erase, with status-register based protection for the top or bottom 4 KB block to host bootloader parameters. The W25H02JVTBIMG implements a low-power architecture with typical standby current under 10 µA and active read current around 25 mA at 104 MHz. Its DTR interface reads two bits per clock edge, effectively doubling throughput without raising the SPI clock frequency, which simplifies PCB signal-integrity design. The 'IMG' suffix (13th character 'G') indicates the part is manufactured using renewable energy per Winbond's published program; all specifications are identical to the W25H02JVTBIM variant. Typical applications include IoT edge devices, smart-home gateways, automotive infotainment and ADAS subsystems, industrial HMI panels, networking equipment boot ROM, and AI accelerator firmware storage. Compared with SPI NAND, NOR Flash provides faster random read latency (no ECC required) and byte-level XIP execution, at a higher cost-per-bit. When designing with this part, ensure that the host MCU's QSPI controller supports 3V flash and that the WP#/Hold# pins are properly terminated to avoid bus contention during in-system programming. Refer to the Winbond W25H02JV datasheet for SFDP parameters, AC timing, and recommended land-pattern geometry.

RFQ Kontak
W25M02GWZEIG - 2G-bit Serial SLC NAND Flash, 1.8V SPI | Winbond
W25M02GWZEIG

W25M02GWZEIG - 2G-bit Serial SLC NAND Flash, 1.8V SPI | Winbond

The Winbond W25M02GWZEIG is a 2G-bit (2x1G-bit) Serial Multi-Chip Package (MCP) NAND flash memory built by stacking two W25N01GW SLC NAND die inside a standard 8-pin WSON 8x6 mm package. The device operates from a 1.8V supply and supports Standard SPI, Dual SPI, and Quad SPI interfaces with clock rates up to 104 MHz, including Continuous Read and Concurrent Read/Write operations. It exposes the standard JEDEC NAND command set with on-chip ECC and bad-block management, giving designers an SPI-friendly alternative to raw parallel NAND. As a member of the Winbond SpiFlash family, the part targets code-storage and data-logging footprints where byte-level random access and small-page SPI reads are preferable to a parallel NAND controller. A Serial NAND flash is a non-volatile memory that uses the SPI bus to expose the page-oriented programming and block-oriented erase operations of NAND, while adding an internal controller that hides the 2K-byte page and 128K-byte block geometry from the host MCU. The category hierarchy is: NAND flash -> non-volatile memory -> memory IC -> semiconductor. Compared with NOR flash, NAND offers higher density per die at lower cost-per-bit, but requires ECC and wear-leveling at the application layer; the W25M02GWZEIG adds internal ECC and configurable bad-block tables to reduce that host overhead. Key features of the W25M02GWZEIG include 2 Gbit total density (256 Mbytes), 2 Kbyte pages, 64 Kbyte spare/parameter blocks, dual-die addressing via die-select CS logic, 100K endurance cycles per block, and 10-year data retention. The 1.8V VCC range (1.7V to 1.95V) suits battery-powered IoT devices, and the wide operating temperature range of -40C to +85C covers industrial and consumer profiles. Quad SPI mode delivers up to 52 Mbyte/s read throughput, while continuous-read mode lets the host stream sequential pages without re-issuing the read command. Internal ECC is configurable up to 8-bit per 512-byte sector with hardware reporting through status registers. The W25M02GWZEIG is built on Winbond's 46 nm SLC NAND process, where each cell stores a single bit for high endurance and predictable retention, in contrast to MLC/TLC used in higher-density cards. The dual-die stack uses independent chip-enable logic so each die appears as a contiguous 1 Gbit logical array; this is transparent to standard SPI drivers that treat the device as a single 2 Gbit array. Compared to a discrete W25N01GW pair, the MCP reduces PCB area by ~50% and simplifies routing. Typical applications include IoT edge nodes storing firmware and telemetry, smart-home hubs, wearable health monitors, point-of-sale terminals, and industrial sensor loggers. The 1.8V supply also makes the part a natural fit for low-power MCUs such as the STM32L4 and Ambiq Apollo series. In designs that already use a small NOR for boot, the W25M02GWZEIG can sit beside it as the larger mass-storage bank without changing the host SPI bus topology. When designing with the W25M02GWZEIG, route the CS#, SCLK, IO0-IO3, and WP#/HOLD# signals as a 50-ohm impedance-controlled group and place a 100 nF decoupling capacitor within 3 mm of the VCC pad to suppress switching transients during Quad SPI reads. Confirm host SPI mode timing against the Winbond datasheet's tV and tSU figures and budget ECC bytes inside each 2K-byte page if your host driver reads raw pages. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond what is printed in the manufacturer datasheet, giving engineers a single reference for selecting, sourcing, and qualifying the W25M02GWZEIG.

RFQ Kontak
W25M02GWZEIG-TR - 2G-bit Serial NAND Flash, 1.8V, SPI | Winbond
W25M02GWZEIG-TR

W25M02GWZEIG-TR - 2G-bit Serial NAND Flash, 1.8V, SPI | Winbond

The Winbond W25M02GWZEIG-TR is a 2G-bit (2 x 1G-bit) serial Multi-Chip Package (MCP) flash memory built by stacking two individual 1G-bit W25N01GW SLC NAND die in a standard 8-pin WSON-8 (ZE) package. It operates from 1.7V to 1.95V supply and exposes a Serial Peripheral Interface (SPI) with single, dual, and quad I/O modes for high-throughput read access up to 104 MHz. According to the Winbond datasheet, the device supports continuous read across both die and concurrent operations between the two internal die for simultaneous read/write. A Serial NAND flash memory is a non-volatile storage IC that uses the SPI bus instead of a parallel interface, replacing legacy parallel NAND with a much smaller pin count while preserving page-based erase and program operations. Within the broader memory hierarchy, NAND flash sits below DRAM and NOR flash in random-access latency but offers far higher density per mm² and a much lower cost-per-bit, making it ideal for data logging, firmware shadowing, and multimedia buffering in embedded systems. The SpiFlash family from Winbond specifically targets cost-sensitive designs that need >128Mb of code or data storage. Key features include 2G-bit (256MB) density, 104 MHz maximum SPI clock, dual/quad SPI modes, page size of 2048 bytes + 64B spare area, block size of 128KB, and 100K program/erase cycles per block with 10-year data retention. The 8-WSON-8 8x6 mm package provides a compact footprint suitable for space-constrained PCB designs. The W25M02GW utilizes Winbond's proven 1G-bit SLC NAND die in a stacked-die MCP configuration. Internal die selection is automatic through a die-select command, and the host MCU sees a contiguous logical address space through extended addressing. ECC handling and bad-block management are typically implemented in the host controller or boot ROM for reliability. Typical applications include IoT edge devices, wearable electronics, automotive infotainment, point-of-sale terminals, industrial sensor data loggers, and 4G/LTE module firmware storage. The 1.8V operation makes it ideal for direct connection to low-power SoCs and PMICs without level shifters. When designing with this device, ensure the host controller implements software ECC (the W25M02GW is raw NAND without internal ECC engine) and reserves adequate RAM for the 2KB page buffer. Quad SPI mode requires all four data lines routed with length matching on the PCB for reliable high-speed reads.

RFQ Kontak
W25N01GVZEIR - 1Gbit SPI/Quad SLC NAND Flash | Winbond
W25N01GVZEIR

W25N01GVZEIR - 1Gbit SPI/Quad SLC NAND Flash | Winbond

The Winbond W25N01GVZEIR is a 1 Gbit (128 MByte) serial SLC NAND flash memory with SPI/Quad I/O interface, housed in an 8-WSON (8x6 mm) surface-mount package. Operating from 2.7 V to 3.6 V, it delivers a 104 MHz maximum clock rate with 7 ns access time, supporting standard SPI, Dual SPI, and Quad SPI modes for high-throughput code-shadowing and data-logging workloads. The device integrates a Continuous Read mode that streams sequential pages without command overhead, a 2 KB SRAM buffer for page read/program, on-die ECC, and a Bad Block Management Look-Up Table (BBM LUT) that transparently remaps failing blocks to reserved spares. A serial NAND flash such as the W25N01GVZEIR is a non-volatile memory IC that stores bits in NAND cell arrays but exposes them through a low-pin-count SPI bus rather than a parallel interface. SLC NAND stores one bit per cell, yielding 10x higher endurance and 10x lower bit error rate than MLC/TLC parts at the cost of density. The part belongs to the broader hierarchy NAND flash -> non-volatile memory -> memory IC -> semiconductor, sitting alongside SPI NOR flash and parallel NAND in modern embedded designs; SPI NAND typically wins where higher density per pin and lower cost-per-bit are required. Key features include industrial -40C to +85C operating range, 100k program/erase endurance cycles per block, 10-year data retention, hardware and software write protection, a 64-bit unique ID, and a JEDEC-standard SFDP (Serial Flash Discoverable Parameters) table that lets host controllers auto-configure the device. The 8-WSON package is halogen-free and RoHS compliant, with renewable-energy manufacturing indicated by the 'G' position-character. The W25N01GVZEIR uses a single 3 V supply and a 1-bit/2-bit/4-bit SPI bus to reduce host pin count versus parallel NAND. Its on-die ECC engine corrects up to 8-bit errors per 512-byte sector, freeing the host MCU from running software ECC and lowering CPU load during page reads. The integrated BBM LUT preserves the logical address space when bad blocks emerge during the device's lifetime, simplifying FTL design for raw-NAND Linux MTD and LittleFS deployments. Typical applications include IoT edge nodes requiring 1 Gbit of low-pin-count non-volatile storage, industrial sensor loggers, smart-home gateways, automotive infotainment boot + data partitions, consumer wearables storing firmware and telemetry, and embedded Linux systems booting from SPI NOR and using SPI NAND as a data partition. Compared with SPI NOR of equal density, SPI NAND delivers higher density per pin at a lower cost-per-bit while trading some random-access speed for sequential throughput. When designing, ensure the host controller supports the Winbond W25N-GV command set (0xEF manufacturer ID, 0xAA21 device ID) and that ECC is either disabled on the host or left to the on-die engine. Place a 1 uF decoupling capacitor within 5 mm of the VCC pin and route /CS through a dedicated GPIO so deep power-down (0xB9) can be asserted to drop standby current below 15 uA when the host sleeps. This page synthesizes distributor pricing, pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Kontak