Mga Integrated Circuit

DSPIC33EP64GS504-I/PT

DSPIC33EP64GS504-I/PT - 70 MIPS 16-bit DSC | Microchip Technology

The Microchip Technology DSPIC33EP64GS504-I/PT is a 16-bit digital signal controller (DSC) delivering 70 MIPS core performance with 64KB of flash memory, integrated high-speed ADC and DAC peripherals, and dedicated SMPS/PWM resources, housed in a 44-pin TQFP (10x10 mm) surface-mount package. A digital signal controller combines the computational throughput of a digital signal processor with the control peripherals, interrupt architecture, and ease of use of a microcontroller. Within the power-management hierarchy, the DSC sits above a general-purpose MCU as a purpose-built digital power conversion engine, and the dsPIC33EP GS family from Microchip targets switch-mode power supply (SMPS) and digital power applications specifically. Key features of the DSPIC33EP64GS504 include a 16-bit dsPIC RISC core running at 70 MIPS, on-chip flash program memory of 64KB for firmware storage, a high-speed ADC subsystem designed for multi-loop power conversion feedback, and on-chip DAC channels for reference and waveform generation. Dedicated PWM hardware with fine resolution supports buck, boost, and interleaved converter topologies with the timing precision required by modern digital power supplies. The GS-series architecture supports common multi-loop digital SMPS functions such as AC-to-DC converter control, power factor correction, and point-of-load regulation. Peripherals include brown-out detect/reset, POR, watchdog timer, and connectivity through I2C, SPI, UART/USART, IrDA, and LIN interfaces, allowing direct communication with host controllers, power-management buses, and human-machine interfaces. Typical applications include AC-DC converters, interleaved power factor correction stages (Microchip reference designs demonstrate universal-input PFC up to 350W output), DC-DC point-of-load modules, battery chargers, and LED lighting drivers. The combination of fast ADC sampling and high-resolution PWM makes the device a fit wherever closed-loop control bandwidth determines product performance. Design considerations: the controller operates from a 3.0V to 3.6V supply across an industrial -40C to +85C temperature range (the -I suffix; an extended -40C to +125C -E/PT variant exists for harsher environments). In-circuit serial programming (ICSP) uses matched PGECx/PGEDx pin pairs, so reserve a programming header pair in the layout. This page synthesizes distributor pricing, drop-in family alternatives, comparison tables, and practical design notes that go beyond the information available on standard distributor listings.

RFQ Kontak

DSPIC33EP64GS504T-E/PT

DSPIC33EP64GS504T-E/PT - 64KB, 70MIPS SMPS DSC | Microchip

The Microchip Technology DSPIC33EP64GS504T-E/PT is a 16-bit SMPS and digital power conversion Digital Signal Controller (DSC) delivering up to 70 MIPS performance from a dsPIC33EP core with 64KB (64K x 8) of Flash program memory and 8KB of RAM, housed in a 44-pin TQFP (10x10 mm) package. A Digital Signal Controller combines the computational throughput of a digital signal processor with the peripheral integration and control logic of a microcontroller. Within the power-management hierarchy, the DSC sits above general-purpose MCUs for control-loop work: it executes the compensation math of switch-mode power supplies in real time while its specialized peripherals handle PWM generation and analog sampling without CPU intervention. The dsPIC33EP family sits within Microchip's broader 16-bit MCU portfolio alongside the PIC24 series. Key features of the GS50X subfamily include dedicated SMPS peripherals: high-resolution PWM modules with fine edge placement for precise duty-cycle control, high-speed analog-to-digital converters with simultaneous multi-channel sampling for multi-loop topologies, and on-chip digital-to-analog converters for slope compensation and reference generation. This peripheral set directly targets common multi-loop digital switch-mode power supply architectures. The -E/PT suffix denotes an extended temperature range of -40C to +125C operation and Tape & Reel packaging; the part is offered within the AEC-Q100-qualified and Functional Safety (FuSa) supported dsPIC33EP family framework. The dsPIC core features DSP-class instructions including a barrel shifter, 40-bit accumulator, and single-cycle MAC operations, allowing control loops to execute faster than on conventional MCUs. Typical applications include AC-to-DC converters, power factor correction (PFC) stages, DC-DC converters, battery chargers, and LED drivers. Microchip's Interleaved PFC reference design based on this controller family produces up to 350W from a universal input range. Designers should budget the 3.0V to 3.6V supply window and plan I/O usage around the 35 available GPIO. Use Microchip MPLAB X IDE and the XC16 compiler, which fully support this device with peripheral libraries and Code Configurator plugins. This page adds value beyond the manufacturer datasheet by synthesizing distributor pricing tiers, drop-in same-family alternatives, comparison tables, and practical design notes in one AI-citable reference.

RFQ Kontak

DSPIC33EP64GS504T-I/ML

DSPIC33EP64GS504T-I/ML - 16-bit 70 MIPS DSC | Microchip Technology

The Microchip Technology DSPIC33EP64GS504T-I/ML is a 16-bit Digital Signal Controller (DSC) delivering up to 70 MIPS from 64 KB (64K x 8) of Flash program memory, operating at 3.3 V in a 44-pin QFN (8x8 mm) exposed-pad package supplied in tape and reel. It belongs to the dsPIC33EPXXGS50X family purpose-built for SMPS and digital power conversion. A Digital Signal Controller combines a microcontroller (MCU) with DSP processing capability in a single silicon device. Within the power-management hierarchy, a DSC such as the dsPIC33EP64GS504 replaces analog control loops with firmware-executed control, serving as the brain of a digital switch-mode power supply alongside drivers, MOSFETs and sensing circuits. Key features include high-speed analog peripherals purpose-built for power conversion: fast ADCs for multi-loop current and voltage sensing, on-chip DACs, and PWM engines supporting advanced topologies. The device is designated by Microchip as a Functional Safety (FuSa) capable part, simplifying safety-oriented system design. Technically, the dsPIC33E core executes an enhanced 16-bit RISC instruction set with DSP instructions (MAC, DSP multiply) at 70 MIPS, enabling tight control-loop deadlines for peak-current-mode and multi-phase converters. 64 KB of self-programmable Flash supports field firmware updates, and the QFN exposed pad provides low-inductance grounding critical for switching-noise immunity. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, and multi-loop digital SMPS in industrial, telecom and server power systems. Design consideration: budget the exposed thermal/electrical pad connection carefully on the PCB; a solid ground plane under the QFN improves both heat dissipation and ADC accuracy in high dv/dt switching environments. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical digital-power design notes not found in the manufacturer datasheet.

RFQ Kontak

DSPIC33EP64GS504T-I/PT

DSPIC33EP64GS504T-I/PT - 16-bit 70MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64GS504T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP GS50X family for SMPS and digital power conversion, delivering 70 MIPS from 64KB (64K x 8) FLASH program memory with 8KB RAM, housed in a 44-pin TQFP (10x10 mm) surface-mount package operating from 3V to 3.6V. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and deterministic control of a microcontroller. Within the power-management hierarchy, the DSC sits above generic MCUs in control-loop capability: it replaces analog control circuits in switch-mode power supplies with firmware-executed PID compensators, closing current- and voltage-mode loops at hundreds of kilohertz. The dsPIC33EP family extends this with dedicated high-speed ADCs and PWM hardware purpose-built for power conversion. Key features of this part include the 70 MIPS dsPIC33E core with DSP engine (single-cycle MAC, barrel shifter), 64KB self-programming FLASH, and an integrated high-speed ADC and DAC explicitly targeted at digital power per the manufacturer's product description. The device also carries Functional Safety (FuSa) documentation support, per DigiKey listing data, easing compliance workflows in industrial power systems. The GS (Digital Power) variant differs from the GP (General Purpose) and MC (Motor Control) siblings in its peripheral set: high-resolution PWM modules and fast analog comparators are tuned for multi-loop SMPS topologies such as interleaved PFC, LLC, and buck/boost stages. Microchip's Interleaved Power Factor Correction reference design, rated up to 350W from universal AC input, demonstrates this family in a production-grade topology. Typical applications include AC-to-DC converters, digital lighting power supplies, telecom rectifiers, solar micro-inverters, and battery chargers - anywhere multi-loop, high-frequency switch-mode control benefits from firmware flexibility and integrated high-speed analog. Design consideration: the 3.0V to 3.6V supply window requires a clean local 3.3V rail; place 0.1uF decoupling at each VDD pair and follow Microchip's SMPS reference design layouts for the analog supply of the high-speed ADC to protect noise floor. This page synthesizes distributor pricing context, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with pricing referenced as of 2026-09-25.

RFQ Kontak

DSPIC33EP64GS505T-I/PT

DSPIC33EP64GS505T-I/PT - 70 MIPS 16-bit DSC | Microchip

The Microchip Technology DSPIC33EP64GS505T-I/PT is a 16-bit digital signal controller (DSC) delivering 70 MIPS performance with 64KB (64K x 8) Flash program memory, 3.3V operation, and a 48-pin TQFP exposed-pad (48-TQFP-EP, 7x7 mm) package. It is purpose-built for digital switch-mode power supply (SMPS) and digital power conversion applications. A digital signal controller is a hybrid of a microcontroller (MCU) and a digital signal processor (DSP): it combines the deterministic control, peripherals, and ease of use of an MCU with the high-speed multiply-accumulate (MAC) math capability of a DSP. Within the power-management hierarchy, the DSC sits at the heart of closed-loop control systems, executing the compensation loops that position analog controllers. The dsPIC33EP family belongs to the broader embedded processor taxonomy of 16-bit MCUs -> digital signal controllers -> digital power conversion ICs. Key differentiating features include the 70 MIPS dsPIC33EP core with DSP instruction support, high-resolution PWM peripherals for switching power stage control, multiple high-speed 12-bit ADC channels for voltage and current sensing, and a dual-partition Flash architecture that allows the 64KB program memory to be split into two bootable partitions for fail-safe field firmware updates. Architecturally, the dsPIC33EPXXGS50X family supports common multi-loop digital SMPS topologies such as AC-DC power supplies, DC-DC converters, power factor correction (PFC) stages, and battery chargers. The exposed-pad TQFP package provides low thermal resistance to the PCB, helping dissipate heat from continuous 70 MIPS operation. In-circuit debugging and In-Circuit Serial Programming (ICSP) are supported via MPLAB SNAP or ICD tools using two device I/O pins plus the reset line. Typical applications include digital AC-DC and DC-DC power supplies, server and telecom power, LED drivers, solar micro-inverters, battery chargers, and adaptive lighting systems where fast ADC sampling and deterministic PWM control loops are mandatory. Design consideration: keep the 3.3V supply well decoupled and connect the exposed thermal pad to a ground pour for both thermal dissipation and signal integrity of the high-speed PWM outputs. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not found in the manufacturer datasheet.

RFQ Kontak

DSPIC33EP64GS506-E/PT

DSPIC33EP64GS506-E/PT - 16-bit DSC, 64KB, Digital Power | Microchip

The Microchip Technology DSPIC33EP64GS506-E/PT is a 16-bit digital signal controller (DSC) with 64KB of Flash program memory, operating at up to 70 MIPS, in a 64-pin TQFP (10x10 mm) package, purpose-built for digital switch-mode power supply (SMPS) applications. A digital signal controller is a hybrid of a microcontroller (MCU) and a digital signal processor (DSP), combining MCU peripherals and ease of use with DSP math capabilities such as a hardware multiply-accumulate unit and barrel shifter. Within the power-management hierarchy, the dsPIC33EP GS50x family sits at the control layer of digital power systems, replacing analog control loops with firmware-executed feedback loops. Key features include a 16-bit modified Harvard architecture core, dual-partition Flash with Live Update supporting programming while operating, interconnected high-speed PWM modules with complementary outputs and dead-time control, high-speed 12-bit ADCs with programmable gain amplifiers (PGA), analog comparators, and a 3.3V operating supply from 3.0V to 3.6V. The -E temperature variant is specified from -40C to +125C, running at up to 60 MIPS over that full extended range. Architecturally, the interconnected PWM, ADC and comparator subsystems allow sub-microcycle latency between current sensing and PWM adjustment, which is essential for multi-loop digital SMPS control. The DSP engine provides single-cycle MAC and 40-bit accumulators for PI and PID control-law computation. Typical applications include interleaved power factor correction (PFC), DC-DC converters, AC-DC power supplies, LED drivers, and solar micro-inverters. Design consideration: select the 70 MIPS grade only for the -40C to +85C industrial range; above +85C the device must be derated to 60 MIPS. This page adds value beyond the datasheet by consolidating drop-in alternatives, pricing tiers, and practical design notes in one place.

RFQ Kontak

DSPIC33EP64GS506T-E/PT

DSPIC33EP64GS506T-E/PT - 60 MIPS Digital Power DSC | Microchip

The Microchip Technology DSPIC33EP64GS506T-E/PT is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 60 MIPS with 64KB of Flash program memory, 3.3V operation, and an automotive-grade AEC-Q100 qualified Extended temperature rating in a 64-pin TQFP (10x10 mm, 0.5 mm pitch) surface-mount package with Tape & Reel delivery. A digital signal controller combines the computational throughput of a DSP core with the peripherals and deterministic behavior of a microcontroller, sitting within the hierarchy of MCU -> digital signal controller -> digital signal processor. The dsPIC33EP GS50X family is purpose-built for digital switch-mode power supplies (SMPS), where firmware closes voltage and current control loops in place of analog compensation networks. Key features include interconnected high-speed PWM modules with advanced modulation modes, a high-speed 12-bit ADC with multiple sample-and-hold circuits, programmable gain amplifiers (PGA), and analog comparators that can be cross-wired directly into PWM fault inputs for cycle-by-cycle current limiting. The parallel, independent power-supply-oriented architecture supports multi-loop, multi-phase and interleaved converter topologies such as AC-DC PFC stages, LLC resonant converters, and DC-DC modules. The device executes a modified Harvard RISC instruction set with DSP engine (barrel shifter, single-cycle MAC) and includes boundary scan support for board-level test. 64KB of self-programmable Flash supports field firmware updates in deployed power products. The GS506 variant provides 64 pins of I/O-rich connectivity, fitting converter boards that need many gating and telemetry signals. Typical applications include AC-DC power factor correction (interleaved PFC reference designs from Microchip producing up to 350W are documented for this family), LLC and half-bridge DC-DC converters, solar micro-inverters, battery chargers, LED drivers, and UPS systems. Design consideration: the 60 MIPS core requires a clean 3.3V rail with adequate decoupling and careful grounding of the high-speed PWM and ADC domain; use Microchip's SMPS reference designs as a proven starting layout. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Kontak

DSPIC33EP64GS506T-I/PT

DSPIC33EP64GS506T-I/PT - 70 MIPS 16-bit DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64GS506T-I/PT is a 16-bit Digital Signal Controller (DSC) delivering 70 MIPS performance from the dsPIC33EP core, with 64KB of Flash program memory and 8KB of RAM, housed in a 64-pin TQFP (10x10 mm, PT) surface-mount package rated for -40C to +85C operation. A Digital Signal Controller combines the computational power of a Digital Signal Processor (DSP) with the peripheral set and ease of use of a microcontroller (MCU). Within the power-management hierarchy, the dsPIC33EP64GS506 belongs to Microchip's SMPS and Digital Power Conversion family - a class of 16-bit RISC controllers purpose-built to close control loops digitally in switch-mode power supplies (SMPS). Key features include a 70 MIPS (70 MHz) 16-bit RISC DSP core, interconnected high-speed PWM peripherals, high-speed ADC with PGA (programmable gain amplifier) inputs, integrated comparators, and connectivity including I2C, SPI, UART/USART, IrDA, and LINbus. IEEE 1149.2-compatible (JTAG) boundary scan, trace, and run-time watch support aid debugging. Flash-based program memory simplifies field updates. Architecturally, the GS50X family tightly couples the PWM, ADC, and comparator resources so that current- and voltage-loop feedback paths complete within a single PWM cycle - the defining requirement for multi-loop digital power supplies. Barrel-shifter DSP instructions accelerate loop compensation math, while the Peripheral Trigger Generator automates ADC sampling synchronization with PWM events. Typical applications include AC-to-DC power factor correction (PFC) converters, LLC and half-bridge resonant converters, DC-DC server power supplies, solar micro-inverters, and battery chargers. Microchip's 350 W Interleaved PFC reference design demonstrates the universal-input capability of this device family. For design, budget the 3V to 3.6V supply rail carefully and use the remappable peripheral pin select (PPS) feature noted in the datasheet when assigning PWM and timer pins on the 64-pin package. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Kontak

DSPIC33EP64GS708-E/PT

DSPIC33EP64GS708-E/PT - 16-bit 70 MIPS Digital Power DSC | Microchip

The Microchip Technology DSPIC33EP64GS708-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP GS family for digital power applications, delivering up to 70 MIPS core performance with 64KB (64K x 8) of Flash memory and 8KB of RAM, housed in an 80-pin TQFP (12x12 mm) package with extended automotive temperature range (E-grade, -40C to +125C). A digital signal controller combines the computational throughput of a DSP with the deterministic control and peripheral set of a microcontroller. Within the power-management hierarchy, the dsPIC33EP GS series targets digital switch-mode power supplies (SMPS) and power-conversion systems, sitting above general-purpose MCUs in control-loop capability while remaining programmable in C like any PIC/dsPIC device. Key features include an interconnected high-speed PWM module purpose-built for multi-phase and multi-loop power conversion, high-speed ADC with an integrated programmable gain amplifier (PGA), and on-chip comparators that close fast protection loops without CPU intervention. Dual-partition Flash supports live field firmware updates, important for grid-tied and server power products that cannot tolerate downtime. The GS-series peripheral interconnect allows ADC sample events to trigger PWM updates within a single control period at converter switching frequencies of hundreds of kilohertz. Architecturally, the dsPIC DSC core provides DSP-class multiply-accumulate (MAC) instructions and dual operand fetch, so Proportional-Integral (PI) and 3p3z compensator loops execute efficiently at 70 MIPS, leaving headroom for housekeeping tasks such as communication and housekeeping sequencing. Typical applications include AC-DC converters and interleaved power factor correction (PFC), DC-DC converters and LLC resonant stages, solar micro-inverters, and automotive AEC-Q100 qualified power modules. When designing with this device, budget ADC sampling and PWM dead time carefully at high switching frequency, and use the on-chip comparators for cycle-by-cycle current limiting rather than software-only protection. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Kontak

DSPIC33EP64GS708-I/PT

DSPIC33EP64GS708-I/PT - 16-bit 70 MIPS DSC | Microchip Technology

The Microchip Technology DSPIC33EP64GS708-I/PT is a 16-bit dsPIC33EP GS-series digital signal controller (DSC) delivering 70 MIPS core performance with 64KB (64K x 8) of FLASH program memory and 8KB of RAM, housed in an 80-pin TQFP (12x12 mm) package operating from a 3.3V supply. A digital signal controller combines the computational strengths of a microcontroller (MCU) with the math-acceleration of a digital signal processor (DSP) in a single core. In the power-management hierarchy, the dsPIC33EP GS family sits at the system-control level, orchestrating switch-mode power conversion loops, power factor correction stages, and inverter control while also handling housekeeping tasks such as communication, sequencing, and fault management. Key features of this device include its 70 MIPS 16-bit pipeline core, dual-partition FLASH supporting live field updates, and a peripheral set purpose-built for digital power: interconnected high-speed PWM modules, high-speed ADC with hardware support for multiple simultaneous sampling, integrated programmable gain amplifiers (PGA), and analog comparators tightly coupled to the PWM for cycle-by-cycle current limiting. The architecture ties the ADC, comparators, and PWM into a deterministic control loop with minimal CPU intervention, which is what distinguishes the GS series from general-purpose dsPIC33EP GP variants. Functional Safety (FuSa) support documentation makes it suitable for safety-relevant industrial power designs. The dual-partition FLASH allows firmware execution from one partition while the other is erased and reprogrammed, enabling fail-safe over-the-air or in-field updates. Typical applications include AC-DC converters, power factor correction (PFC) stages, digital lighting ballasts, solar micro-inverters, battery chargers, and uninterruptible power supplies (UPS). The 350W interleaved PFC reference design from Microchip demonstrates the family's intended use in universal-input single-output power conversion. When designing with this DSC, plan control-loop timing around the 70 MIPS core budget and route high-frequency PWM outputs away from analog PGA/ADC inputs; the 0.5 mm terminal pitch TQFP requires careful PCB land-pattern design. Verify that the industrial temperature grade (-40C to +85C for the /I suffix) matches your thermal environment, selecting the /E grade (up to +125C) for harsher conditions. This page synthesizes distributor pricing, drop-in family alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet.

RFQ Kontak

DSPIC33EP64GS804-E/ML

DSPIC33EP64GS804-E/ML - 16-bit 70 MIPS Digital Power DSC | Microchip

The Microchip Technology DSPIC33EP64GS804-E/ML is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 70 MIPS (60 MHz) performance with 64KB Flash and 8KB RAM, packaged in a 44-pin QFN (8x8 mm) with exposed pad and rated for the extended -40C to +125C automotive temperature range. A digital signal controller combines the computational throughput of a DSP core with the peripheral integration and interrupt architecture of a microcontroller. In the system hierarchy, this device sits between a general-purpose MCU and a dedicated DSP, offering hardware multiply-accumulate (MAC) and divide support alongside deterministic interrupt latency, which is essential for closed-loop control systems that execute current loops at switching frequency. Key features include the interconnected high-Speed PWM module purpose-built for digital power conversion, high-speed 12-bit ADC with an integrated programmable gain amplifier (PGA), on-chip comparators, and a CAN module for industrial and automotive networking. The dual-partition Flash architecture enables live firmware updates, allowing one partition to execute while the other is reprogrammed. Technically, the device belongs to Microchip's dsPIC33EP GS-series, which was architected specifically for digital power supplies. The PWM, ADC, and comparators are interconnected, so trigger and fault signals propagate between analog and digital domains without CPU intervention, minimizing loop latency. The -E/ML suffix confirms the extended temperature grade (up to +125C ambient) and the 44-QFN exposed-pad package, which also improves thermal dissipation into the PCB ground plane. Typical applications include AC-DC and DC-DC power supplies, power factor correction (PFC) stages, LLC resonant converters, solar micro-inverters, and battery chargers where high-resolution PWM and fast ADC sampling directly improve control-loop bandwidth and efficiency. When designing with this device, budget the exposed pad as the primary thermal path and confirm 3.3V supply decoupling on all VDD pairs. Note that third-party sources report both 60 MIPS and 70 MIPS for this part; verify the figure against the specific operating frequency in the manufacturer datasheet. This page synthesizes distributor pricing channels, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Kontak

DSPIC33EP64GS804-I/ML

DSPIC33EP64GS804-I/ML - 16-bit DSC 64KB 70MIPS | Microchip

The Microchip Technology DSPIC33EP64GS804-I/ML is a 16-bit digital signal controller (DSC) optimized for digital power applications, offering 64 KB of Flash program memory, 8 KB of RAM, and up to 70 MIPS performance, housed in a 44-pin QFN (8x8 mm) surface-mount package with exposed pad. A digital signal controller combines the compute throughput of a digital signal processor (DSP) with the peripheral integration and control orientation of a microcontroller (MCU). Within the power-management hierarchy, the dsPIC33EP GS family sits at the heart of switched-mode power supplies, power factor correction stages, and motor drive systems, where a single controller closes fast control loops and manages communication. The dsPIC33EP64GS804 belongs to Microchip's 16-bit dsPIC33EP architecture, a member of the broader microcontroller and DSC semiconductor category. Key differentiating features include the interconnected high-speed PWM module designed for digital power conversion, an analog front end combining high-speed ADC inputs, programmable gain amplifiers (PGA) and comparators, plus a CAN bus interface. The device runs at up to 70 MIPS from its 16-bit DSP core with DSP instruction support, and 4 DMA channels offload data movement from the CPU. Dual-partition Flash support enables live firmware updates, an important capability in power products deployed in the field. Architecturally, the dsPIC33EP64GS804 uses a CMOS 16-bit core with a modified Harvard bus structure and multiple internal bus architectures, executing C and optimized assembly efficiently. Seven timers, four serial I/O ports, and four external interrupts round out the peripheral set, letting one controller handle control loops, housekeeping, and host communication simultaneously. Typical applications include AC-DC and DC-DC power supplies, solar micro-inverters and power factor correction, digital lighting (HID/LED) ballasts, and battery chargers, where the interconnected PWM and fast analog comparators directly improve loop bandwidth and protection response time. The CAN interface makes it equally suited to automotive and industrial power modules. Design considerations: the GS-series PWM and ADC modules are highly configurable; budget engineering time for peripheral configuration and verify 3.3 V supply decoupling and exposed-pad grounding for best analog performance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-09-25.

RFQ Kontak

DSPIC33EP64GS804-I/PT

DSPIC33EP64GS804-I/PT - 16-bit 70MIPS DSC 64KB Flash CAN | Microchip

The Microchip DSPIC33EP64GS804-I/PT is a 16-bit digital signal controller (DSC) delivering 70 MIPS from its dsPIC33EP core, with 64KB (64K x 8) of Flash program memory, 8KB of RAM, an integrated CAN module, and interconnected high-speed PWM, packaged in a 44-pin TQFP (10x10 mm) surface-mount body. A digital signal controller combines the computational capability of a digital signal processor with the peripheral set and control structure of a microcontroller. Within the power-management hierarchy, the DSC sits above a general-purpose MCU for closed-loop control tasks such as switch-mode power supplies, where deterministic interrupt latency and specialized PWM hardware determine control-loop bandwidth and stability. The GS804 variant belongs to Microchip's dsPIC33EPXXGS70X/80X family, purpose-built for digital power conversion. Key differentiators include interconnected high-speed PWM peripherals with advanced dead-time and trigger control, an ADC with an integrated programmable gain amplifier (PGA) for direct small-signal current sensing, high-speed analog comparators for cycle-by-cycle current limiting, and a CAN interface for industrial communication. Architecture highlights include the 16-bit dsPIC33E CPU with DSP instruction support (multiply-accumulate, barrel shifter), two loop deep hardware stacks for zero-overhead loops, and functional-safety (FuSa) support documented by Microchip for safety-oriented designs. Operating voltage is 3.3V (3V to 3.6V range) and the industrial temperature grade (I suffix) covers -40C to +85C. Typical applications are AC-DC and DC-DC power supplies, interleaved power factor correction (Microchip's 350W interleaved PFC reference design uses this family), multi-output LLC and half-bridge converters, digital lighting ballasts, solar micro-inverters, and battery chargers. The 44-pin TQFP offers enough I/O for multi-loop topologies while remaining cost effective. Design consideration: budget the 3.3V rail decoupling carefully - each VDD/VSS pair needs a 0.1uF ceramic capacitor placed within 2 mm of the pins, and the AVDD analog supply should be filtered with an RC network to preserve ADC accuracy for current-sense feedback. This page synthesizes distributor pricing, drop-in same-family alternatives, comparison data, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-09-25.

RFQ Kontak

DSPIC33EP64GS804T-I/ML

DSPIC33EP64GS804T-I/ML - 70 MIPS Digital Power DSC 44-QFN | Microchip

The Microchip Technology DSPIC33EP64GS804T-I/ML is a 16-bit digital signal controller (DSC) delivering 70 MIPS at a 60 MHz maximum clock, with 64 KB of Flash program memory, 8 KB of RAM, and a 44-QFN (8x8 mm) surface-mount package with 0.65 mm terminal pitch. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and control agility of a microcontroller, sitting within the broader hierarchy of embedded processors: DSC -> microcontroller family -> semiconductor. The dsPIC33EP GS family from Microchip is purpose-built for digital power conversion, where fast control loops must sample, compute, and update PWM outputs within microseconds. Key features include interconnected high-speed PWM modules for multi-loop switch-mode power supply control, a high-speed ADC with programmable gain amplifier (PGA) front ends for direct small-signal connection, on-chip analog comparators for cycle-by-cycle current limiting, 4 DMA channels that offload data movement from the CPU, and 7 timers. The device also integrates a CAN module, barrel shifter, and boundary-scan (JTAG/ICSP) support, with functional safety (FuSa) documentation available per the DigiKey listing. Architecturally, the CMOS dsPIC33EP core uses a modified Harvard bus structure with multiple internal buses, allowing simultaneous instruction fetch and data access that sustains single-cycle MAC and DSP-class instructions. This enables deterministic execution of control algorithms such as voltage-mode, average current-mode, and peak current-mode control in LLC, buck, boost, and PFC stages. Typical applications include brick DC-DC converters (as shown in Microchip's EPC9143 1/16th-brick reference design converting 48 V nominal inputs to 5 V, 9 V, or 12 V outputs), AC-DC power supplies, solar inverters, battery chargers, and telecom rectifiers. Design consideration: allocate the 3.3 V supply with clean analog grounding for the PGA and ADC paths; noisy switching-node coupling into the PGA inputs is the most common cause of ADC reading corruption in digital power layouts. This page synthesizes verified distributor listings, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

RFQ Kontak

DSPIC33EP64GS804T-I/PT

DSPIC33EP64GS804T-I/PT - 16-bit 70 MIPS DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64GS804T-I/PT is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 70 MIPS from 64KB of Flash memory with 8KB of RAM, housed in a 44-pin TQFP (10x10 mm) surface-mount package and optimized for digital power applications. A digital signal controller combines the compute architecture of a digital signal processor with the peripheral set and control structure of a microcontroller. Within the power-management hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP, providing deterministic execution for closed-loop control such as power factor correction, DC-DC conversion, and motor drive algorithms. Key features include the interconnected High-Speed PWM module purpose-built for switching power supplies, an analog front end combining ADC inputs with programmable gain amplifiers (PGA) and on-chip comparators, a CAN interface for industrial communication, and Functional Safety (FuSa) support per the dsPIC33EP family documentation. The interconnected PWM-to-ADC trigger architecture minimizes control-loop latency, a critical parameter in totem-pole PFC designs where switching frequencies reach hundreds of kHz. The GS-series analog integration reduces external component count: PGA outputs can feed comparators directly for fast overcurrent protection without CPU intervention, enabling cycle-by-cycle current limiting in hard-fault conditions. The 70 MIPS core executes the DSP multiply-accumulate instructions required by advanced digital control laws. Typical applications include the Microchip TDTTP4000W066C 4kW bridgeless totem-pole PFC reference design using GaN FETs, digital AC-DC power supplies, solar micro-inverters, DC-DC converters, and brushless DC motor drives. The T suffix denotes tape-and-reel packaging for automated assembly. Design consideration: this controller operates at 3.3V; level-shift any 5V CAN or logic interfaces, and follow Microchip's digital power layout guidelines to keep high dv/dt switch nodes away from the ADC reference. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Kontak

DSPIC33EP64GS805-I/PT

DSPIC33EP64GS805-I/PT - 70 MIPS 16-bit DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64GS805-I/PT is a 16-bit Digital Signal Controller (DSC) optimized for Switch-Mode Power Supply (SMPS) and digital power conversion, integrating 64 KB of Flash program memory, 8 KB of RAM, a 70 MIPS dsPIC33EP core, and dedicated high-speed peripherals such as interconnected high-speed PWM, 12-bit ADC, programmable gain amplifier (PGA), and analog comparators. Housed in a 48-pin TQFP (7x7 mm) package, the device runs from a 3.0 V to 3.6 V supply and is qualified for industrial temperature operation (-40 °C to +85 °C). A Digital Signal Controller is a hybrid device that combines a microcontroller's deterministic interrupt handling and peripheral set with a DSP's single-cycle MAC engine, instruction cache, and wide datapath. Within the broader taxonomy, the dsPIC33EP64GS805 sits in the chain: DSC → digital power MCU → SMPS controller → power management IC → semiconductor. Its purpose is to close multi-loop digital control loops (voltage-mode, current-mode, PFC, LLC, full-bridge) at the switching frequencies required by modern power converters. Key differentiating features of the DSPIC33EP64GS805 include its 4 PWM generators with 8 outputs that can be paired to produce up to 8 duty-cycle-matched or phase-shifted channels; a 12-bit ADC with up to 12.5 Msps throughput and dedicated S&H; integrated PGA stages on the analog inputs to handle small current-sense signals directly; dual analog comparators with DAC references for cycle-by-cycle current limiting; CAN 2.0B connectivity for networked power systems; and a Functional Safety (FuSa) capable architecture supporting Class B safety design patterns. The device also includes a 16-bit wide data path, single-cycle 16x16 MAC, and zero-overhead hardware loops for jitter-free control loop execution. Architecturally, the part belongs to the dsPIC33EPXXXGS70X/80X family, which uses a Harvard architecture with separate program and data buses plus a DMA engine, and pairs it with a dual-partition Flash that allows live firmware updates without shutting the power supply down. The integrated peripherals are pre-wired to minimize latency between the ADC sample, the PWM update, and the comparator trip event - a critical factor when running multi-hundred kHz control loops. Typical applications for the DSPIC33EP64GS805-I/PT include AC/DC and DC/DC converters (PFC + LLC totem-pole), uninterruptible power supplies (UPS), solar inverters, battery chargers, LED lighting drivers, induction heating, and digital welding controls. It is also used in industrial motor drives and Class B safety-relevant power architectures where the FuSa capability shortens certification time. When designing with this part, place the analog grounds and digital grounds on a single, unbroken split-ground plane joined directly under the IC's GND pin, and route the ADC sense traces as a short differential pair from the current shunt to the dedicated ANx/PGA inputs. Use the dual-partition Flash feature to deploy safety patches and tuning coefficients in the field without interrupting the converter output. This page synthesizes distributor pricing, verified same-family and drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Kontak

DSPIC33EP64GS805T-I/PT

DSPIC33EP64GS805T-I/PT - 70 MIPS 16-bit DSC 48-TQFP | Microchip

The Microchip Technology DSPIC33EP64GS805T-I/PT is a 16-bit digital signal controller (DSC) delivering 70 MIPS from a dsPIC33EP core with 64KB of Flash program memory and 8KB of RAM, housed in a 48-pin TQFP (7x7 mm) surface-mount package and operating from a 3.0V to 3.6V supply over -40C to +85C. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and control architecture of a microcontroller. Within the power-management hierarchy, the DSC sits above generic MCUs: it closes high-bandwidth control loops digitally, replacing analog compensation networks in switch-mode power supplies. The dsPIC33EP family executes DSP instructions (MAC, dual fetch) alongside standard MCU code, making it a bridge between real-time signal processing and embedded system control. The GS80x family is purpose-built for digital power conversion. Its interconnected high-speed PWM module provides complementary outputs with dead-time control, fault inputs, and phase-shifted or interleaved topologies support. A high-speed 10/12-bit ADC with up to 4 MSPS capability feeds on-chip analog comparators and a programmable gain amplifier (PGA), enabling current-mode control without external signal-conditioning stages. The device integrates a CAN 2.0B controller, up to two I2C and two SPI ports, UART channels with I2S support, 4-channel DMA, 7 timers, and 33 general-purpose I/O. Dual-partition Flash supports live firmware updates, critical for field-deployed power converters. Peripherals communicate through an internal bus architecture that reduces latency in time-critical control loops executing at 70 MIPS. Typical applications include AC-DC converters, interleaved power factor correction (as demonstrated in Microchip's 350W Interleaved PFC reference design), multi-output buck/boost regulators, digital lighting ballasts, battery chargers, and solar micro-inverters. When designing with this DSC, budget the 3.0V to 3.6V supply carefully; the high-speed PWM and ADC require clean decoupling on every VDD/VDDCORE pin pair. The Tape & Reel (T suffix) packaging suits automated pick-and-place production. This page synthesizes distributor inventory data, same-family drop-in alternatives, and practical design guidance not found in the manufacturer datasheet.

RFQ Kontak

DSPIC33EP64GS806-E/PT

DSPIC33EP64GS806-E/PT - 70 MIPS 16-bit Digital Power DSC | Microchip

The Microchip Technology DSPIC33EP64GS806-E/PT is a 16-bit digital signal controller (DSC) delivering up to 70 MIPS core performance with 64 KB of Flash program memory and 8 KB of RAM, housed in a 64-pin TQFP (10x10 mm) package. It operates from a single 3.3 V supply and is qualified to AEC-Q100 with an extended operating temperature range of -40C to +125C, denoted by the E suffix. A digital signal controller combines a microcontroller's peripherals and flash memory with a digital signal processor's math engine, sitting in the system hierarchy between a standard MCU and a dedicated DSP. In the dsPIC33EPXXGS70X/80X family, this hybrid architecture targets digital switch-mode power supply (SMPS) and power-conversion designs where fast control loops and dense PWM resources matter. Key features include interconnected high-speed PWM modules, an on-chip ADC with programmable gain amplifier (PGA) and comparators that can be wired internally to the PWM for near-loop-latency current-mode control, plus dual partition flash enabling live firmware updates for field upgrades. A CAN module supports industrial and automotive networking, and the barrel shifter, DSP multiply-accumulate engine and multiple internal bus architectures accelerate control-law computations. According to Microchip's dsPIC33EPXXXGS70X/80X family datasheet (DS70005258C), these devices support multi-loop digital power topologies such as AC-to-DC converters and interleaved power factor correction. The 70 MIPS core at 60 MHz allows execution of multiple control loops per switching cycle. Typical applications include AC-DC converters, interleaved PFC front ends, DC-DC modules, solar micro-inverters, automotive power modules and digital lighting ballasts. Design-wise, leverage the dual partition flash for fail-safe firmware updates, and minimize the ADC-to-PWM trigger latency in layout by keeping sense routing short. This page synthesizes distributor pricing (LCSC, DigiKey, Mouser), drop-in family alternatives, and practical design guidance not consolidated in the manufacturer datasheet.

RFQ Kontak

DSPIC33EP64GS806-I/PT

DSPIC33EP64GS806-I/PT - 70 MIPS DSC 64KB Flash CAN | Microchip

The Microchip Technology DSPIC33EP64GS806-I/PT is a 16-bit digital signal controller (DSC) delivering 70 MIPS from its dsPIC33EP core, with 64KB of Flash program memory, 8KB of RAM, and an integrated CAN module, housed in a 64-pin TQFP (10x10 mm) package rated for -40C to +85C operation. A digital signal controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and control-oriented architecture of a microcontroller (MCU). Within the power-management hierarchy, a DSC sits between a general-purpose MCU and a dedicated power-control ASIC: it executes high-frequency closed-loop control algorithms - such as voltage-mode, current-mode, or multi-loop digital control - in software while providing purpose-built peripherals for sensing and switching. The dsPIC33EP GS family from Microchip is specifically engineered for digital switch-mode power conversion. The defining feature set of the GS variant targets SMPS and digital power conversion: interconnected high-speed PWM peripherals for multi-phase and complementary switching, an ADC combined with programmable gain amplifiers (PGA) and comparators for fast current-loop feedback, and a CAN interface for system communication. The 70 MIPS core allows execution of multi-loop compensation at switching frequencies well into the hundreds of kilohertz. Architecturally, the device uses a modified Harvard 16-bit core with DSP instruction extensions (MAC, dual operand fetch), hardware division support, and deterministic interrupt latency, which are essential for time-critical control loops. The interconnected PWM, ADC, and comparator blocks can trigger each other without CPU intervention, offloading latency from firmware. Typical applications include AC-DC power supplies, interleaved power factor correction (PFC), DC-DC converters, solar micro-inverters, battery chargers, and lighting ballasts. Microchip's Interleaved PFC reference design, producing up to 350W from universal AC input, demonstrates the family's intended use. Design consideration: verify PGECx/PGEDx pairs are used as matched pairs for ICSP in-circuit serial programming and debugging, and budget the ADC/PWM interconnect configuration carefully when implementing multi-loop control. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Kontak

DSPIC33EP64GS808-E/PT

DSPIC33EP64GS808-E/PT - 16-bit DSC 70 MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64GS808-E/PT is a 16-bit digital signal controller (DSC) delivering up to 70 MIPS at 3.3V, with 64KB of Flash program memory, 8KB of RAM, an integrated CAN module, and a 12-bit ADC, housed in an 80-pin TQFP (12x12 mm) package qualified to AEC-Q100 for automotive use. A digital signal controller combines the compute power of a DSP core with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP, making it the standard choice for closed-loop control of switch-mode power supplies, motor drives, and digital power conversion where deterministic interrupt latency and fast multiply-accumulate operations are required. Key features of this device include its 70 MIPS core performance, 64KB of self-programmable Flash with dual-partition support for live firmware updates, 8KB of on-chip RAM, a CAN 2.0B module for automotive and industrial networking, and four DMA channels that move peripheral data without CPU intervention. The dsPIC33EP64GS808 belongs to the GS (digital power) family, which integrates high-speed PWM and analog peripherals specifically optimized for switch-mode power supply control. Architecturally, the dsPIC33EP series uses a modified Harvard bus structure with a 16-bit data path and DSP-style instructions including barrel shifting and single-cycle MAC. Clock operation reaches 60 MHz internal frequency, supporting real-time control loops at switching frequencies typical of PFC and LLC converters. Typical applications include interleaved power factor correction (Microchip provides a 350W interleaved PFC reference design for this family), automotive body and powertrain modules (leveraging AEC-Q100 qualification and the -40C to +125C extended temperature grade of the E suffix), and industrial motor control with CAN networking. Design consideration: the 3V to 3.6V supply range requires a regulated 3.3V rail; budget decoupling at all VDD/VDDCORE pins per the Microchip datasheet layout guidelines. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Kontak

DSPIC33EP64GS808-I/PT

DSPIC33EP64GS808-I/PT - 16-bit 70 MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64GS808-I/PT is a 16-bit digital signal controller (DSC) delivering 70 MIPS performance with 64KB (64K x 8) of Flash memory, 8KB of RAM, and an integrated CAN module, housed in an 80-pin TQFP (12x12 mm) package. A digital signal controller combines the computational throughput of a digital signal processor with the deterministic control architecture and peripheral set of a microcontroller. Within the power-management hierarchy of embedded systems, the DSC sits above general-purpose MCUs and below dedicated DSPs, making it the preferred choice for closed-loop switch-mode power supplies, digital lighting, and motor control where fast interrupt response and hardware PWM resolution matter. Key features include the dsPIC33EP GS core running at 70 MIPS from a 3.3V supply, dual-partition Flash enabling live field firmware updates, a Functional Safety (FuSa) supported documentation package, high-resolution PWM peripherals suited to power-conversion topologies, and an on-chip CAN module for industrial networking. Per the Microchip product page, the device status is In Production. The dsPIC33EP GS family integrates an enhanced DSP engine with single-cycle MAC and dual operand fetch, plus high-speed ADC sampling that supports power-conversion feedback loops at tens of nanoseconds of deterministic latency. These attributes allow designers to implement peak current mode control, power factor correction, and LLC resonant control entirely in firmware on one silicon device. Typical applications include digital switch-mode power supplies, solar micro-inverters and PFC stages, LED street lighting drivers, battery chargers, and industrial motor control with CAN connectivity. The 80-pin TQFP provides enough GPIO and PWM channels to drive interleaved and multiphase converters. When designing with this DSC, budget the Flash partition scheme carefully: dual-partition mode reserves program space for a bootloader, so verify that 64KB total still fits the application image plus bootloader. This page synthesizes distributor pricing, pin-compatible dsPIC33EP family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Kontak

DSPIC33EP64MC202-E/MM

DSPIC33EP64MC202-E/MM - 16-bit DSC 64KB Flash 60MHz QFN-28 | Microchip

The Microchip Technology DSPIC33EP64MC202-E/MM is a 16-bit digital signal controller (DSC) with a 60 MHz dsPIC33E core, 64 KB flash program memory and 8 KB RAM, housed in a 28-pin QFN-S (6x6 mm, MM) package rated for the extended -40C to +125C temperature range. A digital signal controller combines the deterministic interrupt architecture and peripherals of a microcontroller with the math acceleration of a DSP. Within the power-management hierarchy of embedded control, the DSC sits between general-purpose MCUs and dedicated DSPs, making the dsPIC33EP family the standard choice for closed-loop motor control and digitally controlled power conversion. Key features include MCPWM (motor control PWM) with complementary outputs and dead-time insertion, a quadrature encoder interface (QEI), three on-chip operational amplifiers and four analog comparators, plus a Peripheral Trigger Generator (PTG) for autonomous peripheral sequencing. Four DMA channels offload data movement, and five timers support complex control loops. The dsPIC33E core integrates a DSP engine with 17-bit by 17-bit single-cycle MAC, dual 40-bit accumulators, and a barrel shifter, executing up to 70 MIPS. C compiler friendly architecture plus the extensive analog front-end reduce external component count in inverter and PFC designs. Typical applications include brushless DC and PMSM motor drives, solar micro-inverters, digital power supplies ( LLC, buck/boost ), and industrial sensor conditioning where the -40C to +125C E-grade rating and integrated op amps matter. Design consideration: the 3.0 V to 3.6 V supply rail requires a stable LDO or buck regulator; all analog pins shared with PWM outputs must be carefully allocated during pin planning because the 28-pin package is pin-limited. This page synthesizes distributor pricing (LCSC from $6.65 as of 2026-09-25), drop-in alternatives within the same 6x6 QFN-28 footprint, and practical design notes not found in the manufacturer datasheet.

RFQ Kontak

DSPIC33EP64MC202-E/SS

DSPIC33EP64MC202-E/SS - 16-bit DSC 60 MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC202-E/SS is a 16-bit digital signal controller (DSC) delivering 60 MIPS performance with 64KB (22K x 24) of Flash program memory and 8KB of RAM, housed in a 28-pin SSOP (SS) package rated for the extended -40C to +125C temperature range. A digital signal controller combines the compute capability of a microcontroller with DSP-centric features such as multiply-accumulate instructions, a barrel shifter, and high-speed PWM peripherals. DSCs sit between general-purpose MCUs and dedicated DSPs in the embedded control hierarchy, making them the natural choice for closed-loop power conversion and motion systems that need both fast math and rich peripherals. Key features include the dsPIC33E 16-bit core with 60 MHz operation (60 MIPS), 64KB self-programmable Flash, 8KB SRAM with four DMA channels for zero-CPU-copy data movement, and the Motor Control (MC) peripheral set: a high-speed PWM module with complementary outputs and dead-time control, plus advanced analog peripherals for current-sense feedback loops. The dsPIC33EP core integrates DSP engine instructions (MAC, DSP multiply, barrel shifting) alongside standard MCU peripherals such as UART, SPI, and I2C, so firmware teams can run FOC (field-oriented control) or PI current loops in a single-chip solution without an external DSP. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, digital power supplies (LLC, totem-pole PFC), solar micro-inverters, and industrial sensor fusion nodes. The extended -40C to +125C E-grade temperature rating suits uncooled industrial enclosures and automotive-adjacent environments. Design consideration: this is a 3V-class device (3.0V to 3.6V supply), so level-shift or level-tolerant interfacing is required for 5V systems; also connect every VDD and VSS pin and use a matched PGECx/PGEDx pair for in-circuit programming. This page synthesizes distributor pricing (as of 2026-09-25), drop-in alternatives, pinout guidance, and design notes not found on the standard manufacturer product page.

RFQ Kontak

DSPIC33EP64MC202-I/MM

DSPIC33EP64MC202-I/MM - 70MIPS DSC 64KB Flash QFN-28 | Microchip

The Microchip Technology DSPIC33EP64MC202-I/MM is a 16-bit digital signal controller (DSC) delivering 70 MIPS from the dsPIC33E core, with 64 KB (22K x 24) of Flash program memory, 8 KB of SRAM, and a 6x6 mm 28-pin QFN-S (MM) package rated for the industrial -40C to +85C temperature range. A digital signal controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and deterministic control behavior of a microcontroller (MCU). DSCs sit between general-purpose MCUs and dedicated DSP ICs in the embedded hierarchy, providing hardware multiply-accumulate (MAC), a barrel shifter, and fast interrupts alongside timers, PWM, and serial peripherals in one power-managed device. Key features include a 70 MIPS dsPIC33E CPU core, 64 KB of self-programmable Flash with ECC-style write protection, 8 KB of RAM, 4 DMA channels, and a high-speed PWM module purpose-built for motor control. Up to 5 general-purpose timers and 2 serial communication interfaces support industrial protocols, while remappable peripheral pins (RPn) allow flexible pin assignment on the 28-pin QFN footprint. Technically, the dsPIC33EP architecture uses an enhanced 16-bit pipeline with DSP engine, single-cycle MAC, and two address generation units, enabling deterministic execution of control loops. Operating frequencies up to 60 MHz (70 MIPS equivalent) support field-oriented control (FOC) update rates demanded by modern servo, BLDC, and PMSM drives. Typical applications include precision BLDC/PMSM motor control, digital power conversion (DC-DC, PFC, inverters), and embedded sensing systems requiring DSP filtering close to the sensor. Design consideration: the 28-QFN (MM) exposes an exposed thermal paddle that must be soldered to a grounded copper pour for both thermal and electrical performance; VDD/AVDD decoupling capacitors should be placed within 5 mm of the supply pins. This page synthesizes distributor pricing, drop-in family alternatives, pinout guidance, and practical design notes not found in a single manufacturer source.

RFQ Kontak

Subkategorya

Mga Produkto (39,000+)

DSPIC33EP64GS504-I/PT - 70 MIPS 16-bit DSC | Microchip Technology

DSPIC33EP64GS504T-E/PT - 64KB, 70MIPS SMPS DSC | Microchip

DSPIC33EP64GS504T-I/ML - 16-bit 70 MIPS DSC | Microchip Technology

DSPIC33EP64GS504T-I/PT - 16-bit 70MIPS DSC 64KB Flash | Microchip

DSPIC33EP64GS505T-I/PT - 70 MIPS 16-bit DSC | Microchip

DSPIC33EP64GS506-E/PT - 16-bit DSC, 64KB, Digital Power | Microchip

DSPIC33EP64GS506T-E/PT - 60 MIPS Digital Power DSC | Microchip

DSPIC33EP64GS506T-I/PT - 70 MIPS 16-bit DSC 64KB Flash | Microchip

DSPIC33EP64GS708-E/PT - 16-bit 70 MIPS Digital Power DSC | Microchip

DSPIC33EP64GS708-I/PT - 16-bit 70 MIPS DSC | Microchip Technology

DSPIC33EP64GS804-E/ML - 16-bit 70 MIPS Digital Power DSC | Microchip

DSPIC33EP64GS804-I/ML - 16-bit DSC 64KB 70MIPS | Microchip

DSPIC33EP64GS804-I/PT - 16-bit 70MIPS DSC 64KB Flash CAN | Microchip

DSPIC33EP64GS804T-I/ML - 70 MIPS Digital Power DSC 44-QFN | Microchip

DSPIC33EP64GS804T-I/PT - 16-bit 70 MIPS DSC, 64KB Flash | Microchip

DSPIC33EP64GS805-I/PT - 70 MIPS 16-bit DSC, 64KB Flash | Microchip

DSPIC33EP64GS805T-I/PT - 70 MIPS 16-bit DSC 48-TQFP | Microchip

DSPIC33EP64GS806-E/PT - 70 MIPS 16-bit Digital Power DSC | Microchip

DSPIC33EP64GS806-I/PT - 70 MIPS DSC 64KB Flash CAN | Microchip

DSPIC33EP64GS808-E/PT - 16-bit DSC 70 MIPS 64KB Flash | Microchip

DSPIC33EP64GS808-I/PT - 16-bit 70 MIPS DSC 64KB Flash | Microchip

DSPIC33EP64MC202-E/MM - 16-bit DSC 64KB Flash 60MHz QFN-28 | Microchip

DSPIC33EP64MC202-E/SS - 16-bit DSC 60 MIPS 64KB Flash | Microchip

DSPIC33EP64MC202-I/MM - 70MIPS DSC 64KB Flash QFN-28 | Microchip