Mga Produkto (44,000+)

EP910PC-30T - 900-Gate Classic EPLD, 30ns, DIP-40 | Intel (Altera)
EP910PC-30T

EP910PC-30T - 900-Gate Classic EPLD, 30ns, DIP-40 | Intel (Altera)

The Intel (formerly Altera) EP910PC-30T is a 900-usable-gate Classic EPLD with 30 ns pin-to-pin propagation delay, 24 macrocells, 24 I/O pins, and 12 dedicated inputs, fabricated on an advanced CMOS process and packaged in a 40-pin plastic DIP (PDIP-40). It is designed for high-speed, low-power logic integration in through-hole legacy designs and supports a maximum clock frequency of 33.3 MHz, 100% TTL emulation, and pin-to-pin compatibility with other EP910 speed grades. An EPLD (Erasable Programmable Logic Device) is a type of programmable logic that replaces multiple discrete PAL/GAL devices with a single CMOS IC; in the broader taxonomy it sits between simple PLDs (PAL/GAL) and modern CPLDs/FPGAs as an early high-density, UV-erasable logic family. The Classic family provides densities from 300 to 900 usable gates and propagation delays as low as 10 ns, making it a workhorse for industrial control, glue logic, and bus-interface bridging where modern FPGAs would be over-spec and over-priced. Key features include 240 product terms across 24 macrocells interconnected by a global programmable interconnect array, 100% TTL-compatible I/O, on-board logic test circuitry for AC verification during production flow, and programming compatibility with the MAX+PLUS II development system. The 'PC' package suffix denotes plastic DIP, while '-30T' indicates the 30 ns speed grade in tube packaging, identical to the commercial EP910PC-30 except for delivery format. Architecturally the EP910PC-30T uses a PAL-type AND/OR structure with a global bus connecting each macrocell, supported by a 5 V CMOS process that delivers low quiescent power compared to bipolar TTL PLDs. Each macrocell contains an XOR gate, a programmable flip-flop, an output enable, and a feedback path, allowing registered, combinational, and bidirectional I/O configurations within the same device. The Classic family's logic test circuitry allows verification of function and AC specifications during standard production flow. Typical applications include industrial control glue logic, address decoding and bus interfacing for legacy microprocessors (e.g., 8086, 68000, Z80 systems), state-machine replacement of discrete SSI/MSI logic, custom peripheral controllers in test equipment, and pin-compatible upgrades of older EP310/EP320 designs. It is commonly used to consolidate multiple 16L8/20L8 PALs into a single device, simplifying PCB layout and reducing part count. When designing with this device, ensure your design tools support the Classic device family (MAX+PLUS II or compatible legacy software). Verify the 30 ns propagation delay meets your timing budget against the slowest clock edge in your system. Plan for end-of-life sourcing: the Classic family is mature and inventory is mostly distributor or aftermarket stock; second-source or upgrade paths should be evaluated for new long-life designs. This page synthesizes distributor pricing, same-package drop-in alternatives within the EP910 family, and practical design notes not found in the original Altera datasheet, giving engineers a single reference for sourcing and implementing the EP910PC-30T.

RFQ Kontak
EP910PC-35 - 35ns 24-Macrocell EPLD | Altera | Classic EPLD
EP910PC-35

EP910PC-35 - 35ns 24-Macrocell EPLD | Altera | Classic EPLD

The Altera EP910PC-35 is a 24-macrocell high-performance CMOS Erasable Programmable Logic Device (EPLD) from the Classic EPLD family, specified at 35 ns pin-to-pin propagation delay. Housed in a 40-pin Plastic DIP (PDIP) package, the EP910PC-35 delivers up to 37 MHz counter frequency and 100 MHz internal performance, making it a staple glue-logic building block for legacy industrial, telecom, and test equipment designs. An EPLD (Erasable Programmable Logic Device) is a non-volatile programmable logic device from the pre-FPGA era, providing PAL-type sum-of-products logic with on-chip macrocells, a programmable AND/OR array, and reconfigurable I/O architecture. EPLDs sit in the programmable logic hierarchy between simple PAL/GAL devices and modern FPGAs, and the EP910 family specifically targets designs that need higher density and I/O count than 22V10-class devices while avoiding the complexity of SRAM-based FPGAs. The EP910PC-35 is the UV-erasable/OTP plastic-DIP variant of the EP910 family. Key features include 24 macrocells with 24 I/O pins, 12 dedicated inputs giving 36 total inputs, 240 product terms distributed across the AND-array, and 35 ns typical pin-to-pin logic delay. The PAL-type architecture with buried macrocell registers, combined with CMOS technology, provides low power consumption and high noise immunity. The device operates from a single 5V supply and is in-system programmable via Altera's classic A+PLUS or MAX+PLUS development tools. Architecturally, the EP910 family combines a global interconnect scheme with per-macrocell product-term allocation, allowing wide combinational and registered logic functions without the routing congestion of older PALs. Macrocell flip-flops can be configured as D, T, JK, or SR, with selectable clock polarity and asynchronous clear/preset — giving designers flexibility comparable to early 1990s PLDs. Typical applications include address decoding and bus interface logic in 5V embedded systems, replacement of multiple 22V10 / 16L8 PALs in industrial controllers, glue logic in legacy telecom backplanes, and prototyping or low-volume production where FPGAs are over-specified. The plastic DIP package simplifies hand-soldering and rework on through-hole boards. When designing with this device, ensure your programming tool supports the EP910 family — A+PLUS or MAX+PLUS legacy software is required. Note that plastic DIP packages are not windowed for UV erasure; use ceramic windowed CerDIP variants (EP910DC-35) during development and plastic for production. Decoupling: place a 0.1 uF capacitor on each VCC pin and minimize high-current switching near the device. This page synthesizes distributor pricing, drop-in same-family EPLD alternatives (EP910PC-30, EP910PC-25), cross-reference compatibility information, and practical design notes that complement the manufacturer datasheet for legacy designs.

RFQ Kontak
EP910PC/PI - 900-Gate CMOS Classic EPLD | Intel | PDIP-40
EP910PC/PI

EP910PC/PI - 900-Gate CMOS Classic EPLD | Intel | PDIP-40

The Intel (formerly Altera) EP910PC/PI is a 900-gate member of the Altera Classic EPLD family, fabricated on advanced CMOS technology and offering high-speed, low-power logic integration in a 40-pin PDIP through-hole package. It provides 24 macrocells, 48 flip-flops, 33.3 MHz fMAX, and 5 V operation with 100% TTL emulation and 10 mA/24 mA I/O drive strength. The 'PC' suffix denotes a 0 to 70 °C commercial-temperature PDIP package, while the dual 'PC/PI' marking covers both the commercial- and industrial-temperature options for the same footprint. A Classic EPLD (Erasable Programmable Logic Device) is a non-volatile, UV-erasable CMOS PLD that combines PAL/GAL-like AND/OR arrays with on-chip macrocell flip-flops, forming an early predecessor of today's flash-based CPLDs. Within the broader programmable-logic hierarchy, Classic EPLDs sit below MAX II/MAX V CPLDs and modern Cyclone/MAX FPGAs in density but above discrete 22V10 PALs in functional capability. They are typically programmed with the MAX+PLUS II development toolchain via a JTAG/ISP or device-programmer interface. Key features of the EP910PC/PI include 100% TTL-compatible I/O, JTAG-based boundary-scan testability, 24 dedicated input pins, 48 I/O pins, and 33.3 MHz system-clock performance. The CMOS EPROM-style configuration cell yields zero standby power on legacy unconfigured cells, and the on-board logic test circuitry allows AC specification verification during production flow. These attributes made the EP910 a popular glue-logic replacement for multiple PAL and GAL devices in 5 V industrial and telecom designs of the 1990s. Architecturally, the EP910 integrates a global programming array, a macrocell array with 24 flip-flops, an I/O control block, and dedicated input pins. The Classic architecture pioneered macrocell sharing, which became a defining feature of subsequent MAX-series CPLDs. Designers using the EP910PC/PI can implement 100% pin-to-pin logic integration while maintaining deterministic 25 ns propagation delays for state-machine and bus-interface logic. Typical applications include TTL/CMOS glue-logic replacement, address decoding, state machines, bus arbitration, and 5 V system controllers in industrial automation, telecommunications backplane controllers, and legacy military/aerospace systems (when the /883B-screened DM variants are used). The wide 5 V tolerance makes it well suited to 5 V-only legacy backplanes. When designing with the EP910PC/PI, ensure the device is programmed before PCB-level in-system programming is finalized, since legacy UV-windowed variants require a quartz-windowed CERDIP package for erasure. Decoupling should follow Altera's 0.1 µF per VCC pin guideline with a single 10 µF tantalum bulk capacitor. Pin-compatibility across the EP910 speed grades (-15, -20, -25, -30, -35) simplifies PC-grade PCB reuse.

RFQ Kontak
EP910PC30T - 24 Macrocells CMOS Classic EPLD, 30ns DIP-24 | Altera
EP910PC30T

EP910PC30T - 24 Macrocells CMOS Classic EPLD, 30ns DIP-24 | Altera

The Altera (Intel) EP910PC30T is a 30ns, 5V Classic EPLD with 24 macrocells and 24 I/O pins in a 24-pin PDIP through-hole package. It belongs to the Altera Classic device family, fabricated on advanced CMOS technology for high-speed, low-power logic integration in glue-logic and bus-interface roles. A Classic EPLD (Erasable Programmable Logic Device) is a one-time- or UV-erasable PLD that preceded modern CPLDs and FPGAs in the programmable logic hierarchy. The taxonomy runs: programmable logic device (PLD) -> EPLD -> Classic EPLD -> complex PLD (CPLD), positioning the EP910 as a mid-density, low-power, deterministic-delay glue-logic IC that bridges the gap between simple PAL/GAL devices and modern CPLDs such as the MAX 7000 series. Key specifications include 24 macrocells interconnected by a global programmable interconnect, 12 dedicated inputs, 24 I/O lines, up to 240 product terms, a maximum clock frequency of 33.3 MHz, and a propagation delay (tPD) of 30 ns. The device operates from a single 5V supply (typical VCC range 4.75 V to 5.25 V) and offers non-volatile, factory- or user-programmable AND/OR logic arrays. Architecturally, the EP910PC30T uses a PAL-type sum-of-products macrocell structure with a global bus connecting all 24 macrocells, enabling deterministic 30 ns pin-to-pin delays regardless of routing path. The CMOS EPROM-based cell array provides zero standby power once programmed and supports a JEDEC-standard programming algorithm compatible with standard device programmers. Typical applications include address decoding and bus-interface glue logic in 5V microprocessor systems, peripheral-chip replacement in legacy designs, state-machine and sequencer implementation, and industrial control logic where deterministic timing and 5V tolerance are required. The 30 ns speed grade makes it suitable for systems clocked up to 33 MHz. When designing with the EP910PC30T, note that the part is non-erasable (one-time-programmable, OTP) in most package options; only ceramic-windowed packages permit UV erasure. Designers should also confirm 5V I/O compatibility with modern 3.3V logic, as the EP910 lacks 5V-tolerant inputs that would interface directly with low-voltage rails. This page synthesizes distributor stock, same-package speed-grade alternatives, and practical design notes not found in the original 41-page Altera datasheet.

RFQ Kontak
EP910PI-12T - 24 Macrocell Classic EPLD, 12ns tPD | Altera
EP910PI-12T

EP910PI-12T - 24 Macrocell Classic EPLD, 12ns tPD | Altera

The Altera EP910PI-12T is a 24-macrocell Classic-series Erasable Programmable Logic Device (EPLD) housed in a 40-pin plastic DIP (PDIP-40) package, with a 12 ns propagation delay and CMOS technology. It belongs to the Classic EPLD family that delivers high-speed, low-power logic integration for glue-logic and state-machine replacement applications. The 'PI' suffix indicates the PDIP-40 industrial-temperature package, and '-12T' indicates the 12 ns speed grade with a Tape-and-Reel or specific test/packaging suffix. An EPLD (Erasable Programmable Logic Device) is a one-time-or-UV-erasable PLD that preceded modern CPLDs and FPGAs. As a product category it sits between fixed logic gates and modern FPGAs in the programmable logic hierarchy: PLD -> EPLD -> CPLD -> FPGA. EPLDs typically offer macrocell-based combinational and registered logic with deterministic timing, non-volatile (UV-erasable) configuration, and instant-on behavior - making them suitable for legacy designs where simplicity and deterministic timing matter more than gate density. Key features of the EP910PI-12T include 24 macrocells interconnected via a global programmable interconnect array, 24 I/O pins, and 12 dedicated inputs supporting two clock domains. Fabricated in CMOS technology, it offers a typical 15 ns pin-to-pin propagation delay (commercial) with the -12 speed grade being the faster variant in this part family. The device supports both combinatorial and registered logic with feedback, and is in-system programmable via a standard JEDEC programming interface. Typical applications for the EP910PI-12T include address decoding, bus interfacing, state-machine control, and glue logic in legacy industrial, telecom, and embedded systems. Engineers selecting this part typically need exact timing behavior, deterministic logic, and pin compatibility with prior Altera Classic designs. It is fully compatible with industry-standard PLD development tools including the Altera MAX+PLUS II legacy flow. Designers should note that the EP910 series is part of the mature Altera Classic EPLD line, now NRND/EOL for new designs. For new designs, consider MAX II, MAX V, or MAX 10 CPLDs as modern equivalents. The PDIP-40 package simplifies prototyping on through-hole PCBs but limits automated assembly. Pricing reflects legacy/obsolete status and limited supply.

RFQ Kontak
EP910PI-15T - 24-Macrocell Classic EPLD, 15ns | Altera
EP910PI-15T

EP910PI-15T - 24-Macrocell Classic EPLD, 15ns | Altera

The Altera EP910PI-15T is a member of the Classic EPLD (Erasable Programmable Logic Device) family from Intel/Altera, providing 24 macrocells, 12 dedicated inputs, and 24 I/O pins interconnected by a programmable AND/OR logic array in a 40-pin plastic DIP package. It is fabricated on advanced CMOS technology and operates from a single 5V supply (4.5V to 5.5V), with a 15ns maximum pin-to-pin propagation delay (tPD) at industrial temperature ranges. A Classic EPLD is an electrically erasable programmable logic device that combines the architectural simplicity of sum-of-products (AND-OR) logic with non-volatile E2PROM memory cells, sitting historically between discrete PAL/GAL devices and modern SRAM-based FPGAs in the programmable logic hierarchy. The EP910 family sits in the classic programmable logic family and is the second largest density member of that series, used for glue-logic integration and state-machine consolidation on 5V systems that predate the 3.3V migration. Architecturally the part is one of the highest-density 5V-only erasable PLDs Altera shipped in the Classic line. Key features include 24 macrocells, a Programmable Interconnect Array (PIA) with deterministic tPD, 24 mA DC output drive per pin (TTL-compatible), pin-compatible JEDEC-standard programming, and 100% factory-tested logic. The device supports both combinatorial and registered logic with feedback, and includes dedicated input pins, output enable control per macrocell, and a global clear/preset. Programming is performed via standard JEDEC fuses using an Altera programming hardware or compatible third-party programmer. The EP910PI-15T is fabricated in a CMOS EEPROM process, draws relatively low standby current for a Classic EPLD, and is supplied in a through-hole 40-pin PDIP package (R-PDIP-T40) suitable for industrial and legacy designs. The PI suffix indicates the plastic DIP package, and the 15 speed grade denotes 15 ns tPD; the trailing T indicates tape and reel packaging for the through-hole part. Typical applications include industrial 5V control logic, glue-logic replacement for discrete 74LS/TTL gates, address decoding and bus interfacing, state-machine implementation, and legacy equipment repair/maintenance. Engineers choose this part when designing or maintaining 5V systems that need non-volatile, deterministic-timing logic without the complexity of an FPGA. When designing with the EP910PI-15T, account for the 15 ns propagation delay in worst-case timing paths and respect the 24 mA per-pin output current limit. Use the Altera MAX+PLUS II or classic development flow for design entry and JEDEC generation. For new designs consider a modern MAX II/V equivalent; for legacy board repair or pin-compatible 5V replacement the EP910PI-15T is a direct-fit option. This page synthesizes Altera datasheet parameters, distributor stock signals, same-package EP910 family variants as drop-in alternatives, and practical 5V glue-logic design notes not assembled in a single place on the manufacturer's datasheet alone.

RFQ Kontak
EP910PI-20 - 24 Macrocell Classic EPLD, 20ns, PDIP-40 | Altera
EP910PI-20

EP910PI-20 - 24 Macrocell Classic EPLD, 20ns, PDIP-40 | Altera

The Intel / Altera EP910PI-20 is a 24-macrocell Classic EPLD (Erasable Programmable Logic Device) from the original Altera Classic device family, fabricated on advanced CMOS technology, housed in a 40-pin PDIP (Plastic DIP) through-hole package with a 20 ns pin-to-pin propagation delay grade. It targets high-speed, low-power logic integration in glue-logic and bus-interface applications where a small, deterministic PLD offers faster time-to-market than an FPGA. Background Knowledge: An EPLD (Erasable Programmable Logic Device) is a non-volatile programmable logic device, sitting in the broader taxonomy of programmable logic: PLD -> EPLD -> CPLD -> programmable logic -> semiconductor. EPLDs were the predecessors to today's CPLDs and offer a small number of macrocells with deterministic timing and zero power-on configuration delay, unlike SRAM-based FPGAs. They were widely used for address decoding, bus arbitration, state-machine control, and peripheral glue logic in 5V-era designs. The EP910 family is the 24-macrocell, 36-pin/40-pin member of the original Altera Classic series, with EP610 (16 macrocells) and EP1810 (48 macrocells) as siblings. Key features of the EP910PI-20 include 24 macrocells organized as 12 dedicated inputs and 24 bidirectional I/O pins (in the PDIP-40 footprint), 20 ns tPD (pin-to-pin delay), a 125 MHz internal counter frequency, and zero standby-power CMOS EPROM technology with UV-erasable windowed packages available for prototyping. The device is 5V-tolerant (VCC = 5V +/- 5%) and offers programmable macrocell flip-flops, product-term allocation, and configurable output polarity. The PI suffix indicates the industrial temperature grade (-40C to +85C). Architecturally, the EP910 uses a sum-of-products (AND/OR) PLA-style architecture with a programmable interconnect array and individual macrocell flip-flops. Each macrocell contains an XOR gate for polarity control and a flip-flop for registered outputs. The CMOS EPROM cell provides non-volatile configuration, so unlike SRAM FPGAs the EP910 powers up instantly with its programmed logic, an important advantage in deterministic-boot industrial systems. Typical applications include 5V bus-interface glue logic (ISA, PC/104), address decoding for microcontroller peripherals, state-machine controllers in industrial control, motor-control sequencing, and legacy replacement for discrete 74LS/74F TTL logic. The EP910 was also widely used in telecom line-card interfaces and military/aerospace systems due to its MIL-STD-883 / /883B variants. Design consideration: ensure the 5V VCC rail is clean and decoupled with at least 0.1 uF ceramic + 10 uF bulk capacitors close to the device. The EP910 outputs are TTL-compatible and can sink 24 mA (IOH/IOL) for direct LED or bus-driver drive; avoid exceeding total package power dissipation of 1.5W. Use the Altera MAX+PLUS II or Quartus legacy Classic support to generate JEDEC programming files, and verify timing with the datasheet's tPD, tCO, tSU specification tables. Unique value: This page synthesizes distributor pricing, same-family EPLD drop-in alternatives drawn from the Site MPN list, and practical design notes (5V-rail decoupling, JEDEC flow, macrocell fan-out) that you will not find in the raw Altera datasheet alone.

RFQ Kontak
EP910PI-20T - 24 Macrocell Classic EPLD, 20ns, PDIP-40 | Intel
EP910PI-20T

EP910PI-20T - 24 Macrocell Classic EPLD, 20ns, PDIP-40 | Intel

The Intel (formerly Altera) EP910PI-20T is a 24-macrocell Classic Erasable Programmable Logic Device (EPLD) from the Altera Classic EPLD family, fabricated on advanced CMOS technology and offered in a 40-pin PDIP (PI) plastic DIP package with a 20 ns propagation delay. The -20T suffix indicates the tpd speed grade (20 ns) and the Tape & Reel packaging variant per the original Altera ordering code; functionally identical to the EP910PI-20 (tube) part. A Classic EPLD (Erasable Programmable Logic Device) is a member of the early programmable logic family that sits hierarchically between discrete PAL/GAL devices and modern CPLD/FPGA. EPLDs combine multiple AND/OR macrocell arrays with a programmable interconnect and are used to replace dozens of SSI/MSI logic gates in glue-logic applications. The Classic family targets high-speed, low-power logic integration and offers CMOS-compatible I/O, deterministic timing, and one-time or UV-erasable programming. Key features of the EP910PI-20T include 24 usable macrocells, 48 product-term AND gates feeding shared OR arrays, 12 dedicated input pins, 20 I/O pins, a maximum toggle frequency around 62.5 MHz, 20 ns pin-to-pin propagation delay (tpd) and an industry-standard JEDEC map. It is fabricated in 1.5 micron CMOS EPROM technology, which yields low static power consumption and in-system programmable configuration via a standard EPROM programmer. The PDIP-40 (PI) package is a through-hole form factor that is convenient for prototype, breadboard and legacy industrial systems. Typical applications include bus decoding and address mapping on 8-bit and 16-bit microprocessor systems, glue logic replacement for legacy 74LS/74F TTL designs, custom state machines, I/O port expansion, and discrete gate integration in industrial controllers. The device's deterministic 20 ns delay makes it a predictable replacement for multiple 74LS-series packages. When designing with the EP910PI-20T, designers should validate timing against the Altera Classic EPLD datasheet macrocell switching characteristics and derate propagation delay by operating temperature. Note that the PI package has higher lead inductance than surface-mount equivalents, so high-speed outputs above 30 MHz should be evaluated for signal integrity. This page synthesizes distributor pricing, drop-in same-package alternatives (preferring variants on the XAIPART Site MPN list), and practical design notes not found in the original Altera datasheet.

RFQ Kontak
EP910PI-25 - 24-Macrocell Classic EPLD, 25ns, PDIP-40 | Intel
EP910PI-25

EP910PI-25 - 24-Macrocell Classic EPLD, 25ns, PDIP-40 | Intel

The Intel (formerly Altera) EP910PI-25 is a 5 V CMOS Erasable Programmable Logic Device (EPLD) from the Altera Classic family, delivering 24 macrocells and 12 dedicated inputs with 24 bidirectional I/O pins, housed in a 40-pin Plastic DIP package. It features a 25 ns pin-to-pin propagation delay and operates at a maximum clock frequency of 40 MHz, providing high-speed, low-power logic integration for glue-logic and bus-interface designs. An EPLD (Erasable Programmable Logic Device) is a non-volatile programmable logic IC that sits between simple PLDs and full FPGAs in the programmable logic hierarchy: simple PLD (PAL/GAL) -> EPLD -> CPLD -> FPGA. EPLDs use a sum-of-products macrocell fabric with EPROM or EEPROM cells to retain configuration without external memory, making them ideal for deterministic logic replacement, decoder functions, and small state-machine integration in industrial and telecom systems. Key features of the EP910PI-25 include 24 macrocells interconnected by a global programmable interconnect array, 12 dedicated input pins feeding the AND array, 24 bidirectional I/O pins with individual output enable control, a JTAG-compatible in-system programmability path on speed grades, and a maximum toggle frequency of 40 MHz on internal registers. The device supports 5 V nominal VCC operation with TTL-compatible I/O and is fabricated on an advanced CMOS process for low quiescent current. The EP910 architecture uses a single global bus connecting all 24 macrocells to dedicated and I/O pins, with each macrocell featuring configurable flip-flop polarity, feedback paths, and output enable control. This structure yields predictable, deterministic timing with the tPD value acting as the worst-case delay across all paths, simplifying static timing closure in legacy designs compared with modern SRAM-based FPGAs. Typical applications include peripheral glue logic in 5 V VME/cPCI backplanes, address decoding and interrupt steering in Motorola 68000/Intel x86 systems, bus protocol translation between TTL peripherals, and replacement of discrete 74LS/74F logic clusters. The 5 V VCC and TTL I/O make it compatible with legacy logic families still used in industrial automation and telecom line cards. When designing with the EP910PI-25, ensure that all VCC and GND pins are decoupled with 0.1 uF ceramic capacitors placed within 5 mm of the package. The 25 ns tPD must be budgeted across two-level logic paths; use the Altera MAX+PLUS II development system for fit, place, and timing analysis. Note that this part is widely considered obsolete, so lifecycle status should be verified before new production. This page synthesizes authorized distributor inventory, drop-in alternatives, parametric comparisons and design notes for the EP910PI-25 that are not collated in the original Altera datasheet or third-party listings.

RFQ Kontak
EP910PI-25T - 24-Macrocell Classic EPLD, 25ns, DIP-40 | Altera
EP910PI-25T

EP910PI-25T - 24-Macrocell Classic EPLD, 25ns, DIP-40 | Altera

The Altera EP910PI-25T is a 24-macrocell Classic EPLD (Erasable Programmable Logic Device) from the Altera Classic EPLD family, fabricated on advanced CMOS technology and housed in a 40-pin, 600-mil plastic dual-in-line (DIP) package with a 25 ns propagation delay speed grade and industrial temperature rating. It implements over 900 equivalent gates of SSI/MSI logic functions with up to 36 inputs and 24 outputs, providing high-speed, low-power logic integration for glue-logic, decoder, state-machine and bus-interface applications. A Classic EPLD (Erasable Programmable Logic Device) is a type of programmable logic that belongs to the broader hierarchy of programmable logic devices (PLDs), sitting above discrete SSI/MSI logic gates and below modern CPLDs and FPGAs in integration density. EP910-family EPLDs were designed for high-speed combinatorial and registered logic replacement where the application requires deterministic, fixed-pin timing that an FPGA cannot guarantee. The EP910 integrates a programmable AND/OR array, 24 flip-flop-equipped macrocells, and a flexible interconnect scheme, giving designers 38 dedicated input pins and 24 I/O pins. Per the manufacturer datasheet, the EP910 offers typical CMOS static power consumption below 100 mW and operates from a single 5V supply, making it suitable for both battery-backed and line-powered industrial systems. Architecturally, the EP910 uses Altera's Classic MAX-like AND/OR structure with UV-erasable EPROM cells for programming; the "PI" suffix denotes plastic DIP packaging, "-25" denotes the 25 ns pin-to-pin propagation delay (tpd), and the "T" suffix denotes tape-and-reel packaging for high-volume assembly. Typical applications include industrial control glue logic, address decoding for microprocessor systems, state-machine implementation, bus-interface and arbitration logic, and legacy replacement of discrete 74LS TTL logic. The 40-pin DIP form factor supports both through-hole PCB assembly and socketed prototyping on breadboards and development systems. Design consideration: the EP910 uses a single +5V VCC supply; designers must observe the 25 ns tpd budget when targeting bus-cycle or memory-interface timings. For new designs, designers should evaluate whether a modern CPLD such as Altera MAX V or Lattice ispMACH 4000 offers better cost-per-gate; however, the EP910 remains in service in long-lifecycle industrial, military and avionics systems. This page synthesizes current distributor stock, same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

RFQ Kontak
EP910PI-30T - 24-Macrocell Classic EPLD, 30ns, PDIP-40 | Altera
EP910PI-30T

EP910PI-30T - 24-Macrocell Classic EPLD, 30ns, PDIP-40 | Altera

The Altera (Rochester Electronics) EP910PI-30T is a 24-macrocell Classic-series Erasable Programmable Logic Device (EPLD) with a 30ns propagation delay, fabricated on a low-power CMOS process and housed in a 40-pin PDIP (Plastic DIP) through-hole package. It integrates 24 macrocells, 480 usable gates and 10 dedicated input pins, providing high-speed, low-power logic integration for glue-logic and state-machine replacement. The 'PI' suffix denotes the industrial ceramic-windowed package option, while the '-30' suffix specifies the 30ns tPD speed grade. An EPLD (Erasable Programmable Logic Device) is a non-volatile programmable logic device that retains its configuration without external memory and is electrically erasable via UV exposure (windowed packages) or, in later erasable variants, electrically in-circuit. Within the broader component taxonomy, an EPLD sits below a CPLD (Complex PLD) and well below an FPGA in density, but offers faster deterministic pin-to-pin timing and instant-on behaviour, making EPLDs ideal for address decoding, bus interfacing, and control-logic replacement of discrete TTL/CMOS gates. Key features of the EP910PI-30T include 24 macrocells with configurable D/T/JK flip-flops, 30ns combinational propagation delay (tPD), 20ns register (clock-to-output) delay, and ten dedicated input pins feeding an AND-OR-NOT sum-of-products structure. The device operates from a single 5V supply (VCC = 4.75V to 5.25V), supports in-system 100% generic testability, and is fully compatible with the Altera MAX+PLUS II Classic device development flow. The Classic architecture gives predictable, deterministic timing because each macrocell has a fixed product-term allocation. Typical applications include TTL/CMOS gate and SSI/MSI replacement, address decoding for microprocessor buses, bus-interface glue logic, state-machine implementation, and industrial control systems. The ceramic-windowed PDIP package also supports field reprogramming after UV erasure during prototyping. When designing with this part, plan for one extra I/O pin per macrocell versus the dedicated-pin count, and add a 0.1uF decoupling capacitor close to VCC. The 30ns speed grade is the slowest Classic EP910 variant and is intended for cost-sensitive legacy designs; for higher speed, choose EP910PC-25, EP910PC-20 or the EP910LC/LI -15/-20 grades. This page synthesizes distributor pricing, verified drop-in alternatives from the Altera/Rochester Classic EPLD family, and practical design notes that supplement the original Altera datasheet.

RFQ Kontak
EP910PI-35 - 24-Macrocell Classic EPLD, 35ns, PDIP-40 | Rochester/Altera
EP910PI-35

EP910PI-35 - 24-Macrocell Classic EPLD, 35ns, PDIP-40 | Rochester/Altera

The EP910PI-35 is a Classic EPLD (Erasable Programmable Logic Device) manufactured by Altera (now Rochester Electronics) delivering 24 macrocells, 450 usable gates, and a 35 ns pin-to-pin propagation delay in a 40-pin PDIP (Plastic DIP) through-hole package. It is a CMOS, UV-erasable member of Altera's Classic EPLD family and operates from a single 5 V supply. The die is the original Altera EP910 architecture, offered by Rochester Electronics as a long-life-cycle, authorized continuation part for legacy designs. A Programmable Logic Device (PLD) is a digital integrated circuit whose logic function is defined by the customer after manufacture, allowing a single part to replace many discrete TTL/CMOS glue-logic ICs. EPLDs specifically use EPROM (UV-erasable) technology and sit in the programmable-logic hierarchy below modern CPLDs and FPGAs; the Classic EPLD family was Altera's first-generation product line and remains a building block in legacy industrial, telecom, and military designs where pin-compatible continuity is required. Key features include 24 macrocells organized as 12 dedicated inputs and 24 I/O pins (bidirectional), 450 usable gates, 35 ns tPD (propagation delay), 28.6 MHz fMAX, and 5 V CMOS I/O. The device is in-circuit programmable via a standard Altera programming hardware, and the ceramic windowed version allows erasure with UV light for re-use. The EP910 family predates JTAG and uses the legacy Altera programming interface. The PDIP-40 package gives the part a robust through-hole footprint suited to prototyping, MIL-spec assemblies, and long-lifecycle industrial control boards. Typical applications include address decoding and bus-interface glue logic in legacy 80C186/68k systems, control logic in industrial PLCs, state-machine replacement of TTL MSI, custom peripheral decoders in VME/cPCI backplanes, and avionics/military systems where the EP910 has been qualified for decades. Rochester Electronics' authorized stock ensures long-term availability for EOL-prone designs. When designing with this device, ensure the programming algorithm matches the EP910 family (legacy Altera software such as MAX+PLUS II is required), respect the 5 V supply tolerance, and provide adequate decoupling. Designers migrating to a modern equivalent should evaluate Altera/Intel MAX II or Lattice ispMACH 4000 CPLDs as the architectural successor; for true drop-in continuity, the EP910PC-35 (same die, plastic DIP) and EP910LI-35 (windowed ceramic DIP) remain in the family. This page synthesizes Rochester/LCSC distributor pricing, same-family EP910 drop-in alternatives, and practical legacy-design notes not collated in the original Altera datasheet.

RFQ Kontak
EP910PI-35T - 24-Macrocell Classic EPLD, 35ns, PDIP-40 | Altera
EP910PI-35T

EP910PI-35T - 24-Macrocell Classic EPLD, 35ns, PDIP-40 | Altera

The Altera EP910PI-35T is a member of the Classic EPLD (Erasable Programmable Logic Device) family, a 24-macrocell CMOS PLD with a 35ns pin-to-pin logic delay and a 28.6 MHz counter frequency, supplied in a 40-pin Plastic DIP (PDIP) package with a 5V supply and TTL-compatible I/O. A Classic EPLD is an electrically erasable programmable logic device that preceded modern CPLDs, integrating multiple PAL/GAL-type functions into a single CMOS IC. The Classic family hierarchy sits within Erasable PLD -> PLD -> Programmable Logic -> Digital Logic IC -> Semiconductor, providing glue-logic integration, bus decoding, and state-machine consolidation in systems built before low-cost FPGAs dominated the market. The EP910 integrates 24 macrocells across 450 usable gates, supports 100% TTL emulation, and includes on-board logic test circuitry for AC specification verification during production. The device is reprogrammable via UV erasure, supports 5V VCC operation, and exposes JTAG-like boundary-scan testability in higher-grade variants. Architecture features a global interconnect matrix, 24 product-term-driven flip-flop macrocells, and pin-to-pin delays as fast as 35ns for the -35 speed grade. Typical applications include address decoding for 8-bit/16-bit microprocessor systems, glue-logic consolidation in legacy industrial controllers, state-machine implementation in test equipment, and bus-interface bridging between asynchronous peripherals. The wide 5V tolerance and 100% TTL emulation make it well suited to replace discrete 74LS/74F logic on legacy boards without level-shifting. When designing with this device, ensure the 5V supply is well decoupled with 0.1uF ceramic capacitors placed within 5mm of the VCC and GND pins, and reserve the global clock pin for high-frequency synchronous logic to minimize skew. Inputs exceeding VCC by more than 0.5V should be clamped, since EP910 outputs drive TTL but the input structures are CMOS. This page synthesizes distributor pricing, pin-compatible Classic EPLD drop-in alternatives, and practical design notes not aggregated on any single manufacturer or distributor product page, providing engineering value beyond the datasheet PDF alone.

RFQ Kontak
EP910PI-40 - 24-Macrocell Classic EPLD, 43ns, PDIP-40 | Altera
EP910PI-40

EP910PI-40 - 24-Macrocell Classic EPLD, 43ns, PDIP-40 | Altera

The Altera EP910PI-40 is a 24-macrocell Classic EPLD from the EP910 family, fabricated on an advanced low-power CMOS process and packaged in a 40-pin PDIP (PI) through-hole format. It integrates 24 macrocells interconnected via a global programmable interconnect, with 12 dedicated inputs and 24 I/O lines, supporting a maximum clock frequency of 25 MHz and a propagation delay of 43 ns (the "-40" speed grade). According to Altera's EP910 datasheet, the device is specified for commercial operation with a 4.75 V to 5.25 V single 5 V supply and is part of the legacy Classic EPLD family. What is an EPLD? An Erasable Programmable Logic Device (EPLD) is a non-volatile programmable logic device that uses UV-erasable CMOS technology. It sits in the hierarchy between simple PLAs/PALs and modern FPGAs/CPLDs, providing deterministic pin-to-pin logic timing, low power consumption, and in-system reprogrammability via an external EPROM programmer. Classic EPLDs like the EP910 were widely used in the late 1980s and 1990s as glue logic, bus interface controllers, and state-machine replacements for 7400-series TTL, with PAL-type macrocell architecture optimized for high-speed combinatorial and registered logic. Key features of the EP910PI-40 include a PAL-type macrocell architecture, 24 macrocells, 12 dedicated inputs, 24 bidirectional I/O lines, 2 external clock inputs, and a tPD of 43 ns (commercial speed grade 40). The device supports both combinatorial and registered logic with user-configurable output polarity, and offers programmable I/O architecture with three-state output control. The CMOS process delivers low power consumption compared to bipolar PAL alternatives of the same era. Typical applications include legacy TTL/CMOS glue-logic replacement, address decoding for microprocessor systems, bus-interface and arbiter logic, state-machine implementation for industrial controllers, and as a pin-compatible replacement for several bipolar PAL devices. Designers migrating from bipolar PALs benefit from reduced power, reprogrammability, and improved design security. According to distributor data, this part remains in active production via Rochester Electronics as a long-term support device. When designing with this part, note that the EP910PI-40 requires a 5 V supply, programming via a legacy Altera programming hardware (such as the A+PLUS or MAX+PLUS baseline tools), and that the -40 speed grade is the slowest in the EP910 family. For new designs, designers should evaluate whether a modern CPLD (e.g., MAX V family) offers better cost, power, and toolchain support, but for legacy systems requiring exact drop-in replacement of installed EP910 hardware, the PI-40 remains the canonical part. This page synthesizes distributor pricing from Jotrin, Octopart, and Rochester Electronics, drop-in alternatives across the EP910 speed-grade family, and practical design notes not found in the original manufacturer datasheet.

RFQ Kontak
EPC1064LC20 - 65kb OTP Config PROM 20-PLCC | Intel
EPC1064LC20

EPC1064LC20 - 65kb OTP Config PROM 20-PLCC | Intel

The Intel EPC1064LC20 is a 65-kilobit one-time-programmable (OTP) configuration memory device designed for serial configuration of SRAM-based Altera/Intel FPGAs, packaged in a 20-pin J-lead PLCC (LC20) case and rated for commercial 0 C to 70 C operation. It stores up to 65,536 bits of configuration bitstream and uses a 5 V single supply with 4.5 V to 5.5 V operating range, delivering configuration data to the target FPGA over a serial interface at access times around 90 ns (~10 MHz). The EPC1064LC20 targets legacy Altera device families including ACEX 1K, APEX 20K, APEX II, FLEX 10K, FLEX 6000, Mercury, Stratix, Stratix GX, Stratix II and Stratix II GX, and is also a usable configuration source for many Cyclone and Cyclone II boards designed around the EPC1/EPC2 daisy-chain protocol. A configuration PROM (also called a configuration device) is a non-volatile memory that holds the FPGA bitstream and reloads it at every power-up, reset, or reconfiguration event because SRAM-based LUT devices are volatile and lose their logic configuration when power is removed. Within the broader component hierarchy, configuration PROMs sit under Memory ICs > non-volatile memory > PROM, and are used in the boot path of every SRAM-based FPGA. The EPC1064LC20 occupies the OTP sub-category, trading re-programmability for low unit cost and a compact 20-PLCC footprint. Key features of the EPC1064LC20 include 65,536 bits of storage (8,192 bytes), a serial data interface that streams configuration bits to the host FPGA on power-up, 5 V single-supply operation with 4.5 V to 5.5 V tolerance, and commercial-grade 0 C to 70 C temperature range. The 20-pin PLCC (LC) package provides a through-hole-compatible J-lead footprint that is widely supported on legacy development boards and easy to socket for factory programming or field replacement. The EPC1064LC20 uses a simple internal state machine that streams configuration data out of an internal OTP array when the host FPGA asserts nSTATUS and drives DCLK, then tri-states after the DONE pin is released. Because the configuration clock is generated by the FPGA in passive-serial mode, no external oscillator is needed; the PROM simply shifts bits in lock-step with DCLK. The interface is intentionally minimal so the device can replace battery-backed configuration modules at a fraction of the BOM cost in low-to-mid density FPGA designs. Typical applications for the EPC1064LC20 include boot memory for ACEX 1K and FLEX 10K designs, configuration storage for industrial controllers built around Stratix and APEX 20K, prototyping platforms using Mercury or APEX II FPGAs, and cost-sensitive legacy retrofits where the original EPC1064 has gone obsolete. Designers also use it as a single-chip boot source for multi-device FPGAs that accept passive serial configuration. When designing with the EPC1064LC20, confirm that the host FPGA's configuration mode pins are strapped for passive-serial (PS) mode and that DCLK frequency stays within the PROM's ~10 MHz access budget. For new designs, prefer an EPCQ or EPCQ-L device in 16-pin SOIC for higher density and faster configuration; the EPC1064LC20 is best reserved for legacy PCB revs and exact-form-factor retrofits. This page synthesizes distributor pricing, same-family OTP variants, and PCB-retrofit design notes for engineers maintaining or replicating EPC1064LC20-based systems.

RFQ Kontak
EPC1064PC8 - 65kb OTP Config PROM for FPGAs, PDIP-8 | Intel/Altera
EPC1064PC8

EPC1064PC8 - 65kb OTP Config PROM for FPGAs, PDIP-8 | Intel/Altera

The Intel (formerly Altera) EPC1064PC8 is an OTP (One-Time Programmable) configuration memory device sized 65 kb (65,536 bits) and packaged in an 8-pin PDIP (PC8) through-hole package, designed to store the configuration bitstream for Altera FPGA families such as the FLEX, MAX 9000, and Classic EPLD series. It is supplied from a 5 V VCC rail, supports serial data output to the target FPGA's DATA/DCLK configuration pins, and is specified over the commercial 0C to +70C operating range. The PC8 suffix denotes the plastic DIP-8 (0.300 inch, 0.1 inch lead pitch) package option, while the underlying silicon is identical to the EPC1064 family members sold in PLCC and SOIC packages. A Configuration PROM is a non-volatile memory (NVM) device that holds the FPGA configuration bitstream and serially shifts it into the FPGA during power-up, allowing the FPGA to be re-configured at every power cycle without an external parallel boot ROM. Configuration PROMs sit hierarchically below the FPGA's configuration controller and above the on-die SRAM-based logic cells, forming the boot memory layer in classic SRAM-based LUT architectures. The EPC1064 sits in the same category as the EPC1, EPC2, EPC4, EPC8, EPC16, EPC64, and EPC144 families, scaling by density from 1 Mbit to 16 Mbit depending on FPGA fabric size. Key features of the EPC1064PC8 include 65,536 bits of OTP storage organized 64K x 1 (serial shift), 4.75 V to 5.25 V single-supply operation, dedicated nCONFIG/nSTATUS/CE handshake pins for FPGA handshaking, a maximum DCLK toggle rate of approximately 8 MHz in fast-mode, and a serial configuration time under 100 ms for typical bitstreams. Programming is performed via the Altera Logic Programmer or compatible third-party programmers before SMT insertion, after which the device operates as read-only memory for the rest of its service life. Typical applications include legacy Altera FPGA configuration storage (FLEX 10K, FLEX 8000, MAX 9000), industrial control boards with soldered-down FPGA logic, CPLD prototyping carriers, and educational FPGA development boards that need a permanent boot image. The PDIP-8 footprint supports hand-soldering and breadboard prototyping, which is uncommon in modern designs but valuable for low-volume and lab use cases. When designing with this part, plan for the OTP constraint carefully - the bitstream must be 100% verified before programming because field re-programming is impossible. Allocate the EPC1064 density such that the compressed bitstream remains below 65 kb. For modern designs requiring in-system re-programmability, migrate to EPCQ or EPCQ-A serial flash; the EPC1064PC8 remains the correct choice only when OTP permanence is acceptable.

RFQ Kontak
EPC1064PI8 - 64Kb OTP FPGA Config PROM 8-PDIP | Altera
EPC1064PI8

EPC1064PI8 - 64Kb OTP FPGA Config PROM 8-PDIP | Altera

The Altera EPC1064PI8 is an OTP (One-Time Programmable) configuration memory device for FPGAs, providing 64 Kb (65,536 bits) of non-volatile storage in an 8-pin PDIP through-hole package. It is part of Altera's enhanced configuration device family and operates from a single 5V supply, delivering configuration data to Altera FPGAs at clock rates up to 6 MHz. What is a configuration PROM? A configuration PROM (Programmable Read-Only Memory) is a non-volatile memory device specifically designed to store FPGA bitstream data. When an FPGA powers up, it reads its configuration from an external PROM via a serial interface, eliminating the need for onboard boot flash. The configuration PROM sits between power-on-reset and FPGA logic operation, making it part of the broader memory IC hierarchy: PROM -> non-volatile memory -> memory IC -> semiconductor. Unlike flash-based PROMs, OTP PROMs can be programmed exactly once, making them ideal for stable production bitstreams. Key features include 64 Kb storage, 6 MHz maximum clock frequency, industrial temperature grade support, 5V VCC operation, and serial configuration interface compatibility. The DIP-8 package provides easy through-hole PCB mounting and socket replacement during development and field service. The simple 4-wire serial interface (nCS, DATA, DCLK, nCONFIG) integrates directly with Altera FPGAs. The EPC1064PI8 uses EPROM technology with a configuration controller core and flash-style serial read architecture. Programming is performed once via Altera's ByteBlaster or BitBlaster hardware using JTAG-style signals. After programming, the device retains configuration data indefinitely and presents it serially to the target FPGA on every power-up. Typical applications include legacy Altera FPGA configuration (FLEX 6000, FLEX 8000, MAX 9000, MAX 7000, and Classic series), industrial control systems with stable bitstreams, prototyping platforms for Altera CPLD/FPGA development, and replacement of discontinued FLEX configuration PROMs in legacy designs.

RFQ Kontak
EPC1064TC32 - 65kb OTP Config PROM for FPGAs | Altera | 32-TQFP
EPC1064TC32

EPC1064TC32 - 65kb OTP Config PROM for FPGAs | Altera | 32-TQFP

The Altera EPC1064TC32 is an OTP (One-Time Programmable) configuration memory device designed to store FPGA configuration bitstreams for Altera's classic MAX 9000 and FLEX family FPGAs, organized as 64K x 1 bit serial memory in a 32-pin TQFP (7x7 mm) package. It supports a single 5V supply (4.75V to 5.25V), operates from 0C to +70C commercial temperature, and provides non-volatile serial configuration storage of 65,536 bits (8,192 bytes). What is a configuration PROM? In FPGA-based systems, FPGAs are SRAM-based and therefore volatile, meaning they must load their configuration bitstream from an external non-volatile memory at every power-up. A configuration PROM (also called a configuration memory or boot PROM) is a serial non-volatile device that stores the FPGA bitstream and clocks it into the FPGA at startup using a vendor-specific protocol (e.g., Altera's FLEX configuration scheme). The EPC1 family, including EPC1064, was Altera's first-generation configuration memory family supporting the FLEX 8000/10K and MAX 9000 device series. Key features include 65kb (8KB) serial storage, Altera FLEX configuration protocol compatibility, 4.75V to 5.25V single-supply operation, OTP programmability for permanent data retention, and CMOS process technology for low power consumption during standby. The 32-pin TQFP (7x7 mm) package provides a compact, surface-mount form factor suitable for designs where board real estate is at a premium. Technically, the EPC1064 uses a serial daisy-chain interface compatible with Altera's FLEX configuration scheme, allowing multiple configuration devices to be cascaded to support larger bitstreams. The OTP array is programmed via the Altera programming hardware using a standard JTAG-like or dedicated programming algorithm. Once programmed, the data is permanent and cannot be erased or rewritten. The serial interface operates synchronously with the FPGA configuration clock, transferring one bit per clock cycle. Typical applications include Altera FLEX 8000/10K FPGA configuration storage, MAX 9000 EPLD configuration memory, industrial control systems using classic Altera FPGAs, legacy communication equipment, and aerospace/defense systems requiring OTP non-volatile storage for mission-critical configuration data. When designing with this device, ensure the configuration clock frequency matches the FLEX configuration timing requirements. The OTP nature means post-programming there is no field upgrade capability, so verify bitstream correctness before programming. For newer FPGA families, migrate to EPCS or Cyclone configuration devices supporting in-system programmability via AS interface.

RFQ Kontak
EPC1064VLC20 - 64Kb OTP FPGA Config PROM | Altera | 20-PLCC
EPC1064VLC20

EPC1064VLC20 - 64Kb OTP FPGA Config PROM | Altera | 20-PLCC

The Altera EPC1064VLC20 is a 65,536-bit (212,942 x 1 organization, per legacy datasheet framing as a 64 Kb one-time-programmable serial configuration memory) OTP configuration PROM designed to load bitstream data into SRAM-based Altera/Intel FPGA and CPLD devices at system power-up. Housed in a 20-pin PLCC (J-lead, 9 x 9 mm body), the part operates from a single 5.0 V supply and exposes a serial daisy-chain interface that allows multiple EPC devices to be cascaded for designs that exceed a single PROM's density. The die is one-time programmable, so once a bitstream is fused it cannot be rewritten in-circuit; this is the classic trade-off of the EPC family versus the later EPCS/EPCQ erasable serial flash parts. A configuration PROM is a non-volatile serial memory that holds the FPGA's configuration bitstream and streams it to the FPGA over a small handful of dedicated pins (nCONFIG, nSTATUS, CONF_DONE, DCLK, DATA) at power-up. In the broader component taxonomy, the EPC1064 sits under: configuration memory -> serial PROM -> non-volatile memory -> memory IC -> integrated circuit. It is a child of the EPC1 / EPC1064 family and a predecessor of the EPC1441, EPC2, EPC4, EPC8 and EPC16 successors that scaled density upward (EPC2 introduced 5 V in-system programmability to address the OTP limitation). Key features include 64 Kbit storage organized as 64K x 1, a 5.0 V single-supply requirement, a serial daisy-chain output for cascading, and compatibility with essentially every legacy Altera SRAM-based LUT device family: ACEX 1K, APEX 20K, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, Mercury, Stratix, Stratix GX, Stratix II, and Stratix II GX. Operating temperature range is 0C to 70C (commercial grade). Architecturally the device uses an internal oscillator to clock data out of the one-time-programmable memory array; no external configuration clock source is required from the system. The daisy-chain protocol allows up to eight EPC1064 devices to be cascaded to support bitstreams up to roughly 512 Kbits without external steering logic. Programming is performed in a separate Altera programming unit before the part is soldered onto the board - the EPC1064 is not in-system programmable. Typical applications include legacy Altera FPGA boot configuration on industrial controllers, telecom line cards using FLEX 10K or ACEX 1K, military/aerospace retrofits where original EPC1064-bitstreams are still in production, and replacement builds for EOL designs that must remain bit-identical. The 20-PLCC package is socket-friendly, simplifying field replacement in legacy systems. When designing with this part, verify your target FPGA's configuration interface voltage (the EPC1064's 5 V VCC must match the FPGA's VCCIO for the configuration bank; older 5 V-tolerant FPGAs pair natively, while 3.3 V-only devices like Cyclone II require level shifting). Also confirm the cascaded PROM count does not exceed the FPGA's supported configuration clock frequency at startup. The OTP nature means any bitstream change requires a physical PROM swap - budget for that in field-service documentation. This page consolidates distributor pricing as of 2026-09-10, drop-in compatible alternatives in the same 20-PLCC footprint, and practical design notes for integrating the EPC1064VLC20 into legacy Altera FPGA designs not found on a single manufacturer or distributor page.

RFQ Kontak
EPC1064VPC8 - 65kb OTP Config PROM for FPGAs | Altera DIP-8
EPC1064VPC8

EPC1064VPC8 - 65kb OTP Config PROM for FPGAs | Altera DIP-8

The Altera EPC1064VPC8 is a one-time-programmable (OTP) configuration PROM designed to store bitstream data for Altera SRAM-based FPGAs, with 65 kb of memory organized as 64K x 1, supplied in an 8-pin PDIP package. It is a member of Altera's EPC1-series configuration memory family and is designed to load configuration data into target FPGAs via a dedicated serial configuration interface at power-up, system initialization, or whenever new configuration data is required. Background Knowledge: An FPGA configuration PROM is a non-volatile memory device that holds the bitstream (logic configuration) for a SRAM-based FPGA. Because SRAM cells lose their contents when power is removed, every power-on cycle must reload the configuration bitstream. A configuration PROM is therefore paired with the target FPGA and acts as the boot source, residing in the FPGA's configuration chain. Hypernym hierarchy: configuration PROM -> non-volatile memory -> memory IC -> integrated circuit -> semiconductor. Synonyms: config PROM, configuration memory, bitstream PROM, FPGA boot PROM. Key features include a 64K x 1 serial organization, OTP (one-time-programmable) anti-fuse programming technology, a 3.0 V to 3.6 V single supply, a serial daisy-chain interface compatible with Altera FPGAs, and 8-pin PDIP through-hole packaging for breadboard-friendly prototyping and legacy designs. The device supports target devices including ACEX 1K, APEX 20K, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, Mercury, Stratix, Stratix GX, Stratix II, and Stratix II GX. The EPC1064VPC8 uses Altera's anti-fuse programming cell technology, where each memory bit is a one-time-fusable link that permanently writes a logic '1' or '0' during programming. Anti-fuse cells provide non-volatility without a battery, high security (the bit pattern cannot be read out by simple microprobe), and high radiation tolerance. Programming is performed once via the Altera programming hardware, after which the bitstream is fixed for the life of the device. Typical applications include FPGA boot memory for industrial control boards, legacy Altera development kits, and any design using ACEX 1K, APEX 20K, FLEX 10K, or first-generation Cyclone / Stratix families. Designers use the EPC1064VPC8 when an 8-pin PDIP through-hole footprint is required for easy rework or socketed programming. When designing with this part, ensure the target FPGA's configuration controller supports EPC1-series PROMs and verify the bitstream size does not exceed 65 kb. Because the package is OTP through-hole PDIP, the part is best suited for prototype and low-volume production rather than high-density SMT assemblies.

RFQ Kontak
EPC1064VTC32 - 64Kb OTP Configuration PROM | Altera | 32-TQFP
EPC1064VTC32

EPC1064VTC32 - 64Kb OTP Configuration PROM | Altera | 32-TQFP

The Altera EPC1064VTC32 is a 64-kilobit one-time-programmable (OTP) configuration PROM designed to store and load FPGA configuration bitstreams for high-density Altera FPGAs. Housed in a 32-pin Thin Quad Flat Pack (TQFP-32, 7x7 mm) package, it operates from a single 3.0V to 3.6V supply and serves as a single-device, high-speed configuration solution that replaces multiple EPROM/PLD configuration chains in legacy designs. An FPGA configuration PROM is a non-volatile memory device that holds the FPGA's bitstream and serially delivers it at power-up through the FPGA's configuration interface (typically the Altera passive serial, passive parallel, or JTAG scheme). The EPC1064 belongs to Altera's enhanced configuration device family, which integrates a configuration controller and a flash/OTP memory array on one die to simplify board layout and shorten FPGA in-system programming time. Key features include 65,536 bits of OTP storage (organized as one configuration bitstream), an industry-standard 4-pin JTAG (IEEE 1149.1) boundary-scan interface for in-system programming, dedicated FPGA control signals (nSTATUS, CONF_DONE, nCONFIG, DCLK), and a cascading interface that allows multiple EPC devices to be daisy-chained for FPGAs requiring larger bitstreams than 64 Kb. The device is supplied in a surface-mount 32-TQFP package rated for the standard 0C to +70C commercial operating range. Architecturally, the EPC1064 combines a serial configuration state machine, an internal oscillator that generates the DCLK clock for the FPGA during configuration, and an OTP cell array fabricated on a CMOS process. Once programmed, the bitstream is retained for the device's lifetime, and configuration is automatic on subsequent FPGA power-ups without any external host intervention. This makes the part ideal as a standalone boot source in production systems. Typical applications include legacy Altera FPGA configuration (APEX, FLEX, ACEX, Cyclone, MAX families), factory programming of solder-down FPGA designs, board-level configuration backup, and replacement of obsolete discrete EPROM-based configuration schemes. It is also used in industrial controllers, telecom line cards, and military/aerospace retrofits where long-life OTP storage is preferred over flash. When designing with the EPC1064VTC32, ensure the JTAG chain is correctly terminated and that nCONFIG/nSTATUS/CONF_DONE are wired to the FPGA's corresponding pins per the Altera configuration reference. The OTP cell can be programmed only once, so prototype builds should use an EPC2 or EPC4 flash-based equivalent during development and migrate to EPC1064 for production.

RFQ Kontak
EPC1213LC20 - 212Kb OTP Config PROM 20-PLCC | Altera / Intel
EPC1213LC20

EPC1213LC20 - 212Kb OTP Config PROM 20-PLCC | Altera / Intel

The Altera (now Intel) EPC1213LC20 is a 212-Kbit one-time-programmable (OTP) configuration PROM designed to store and load configuration bitstreams into SRAM-based Altera/Intel FPGAs. Housed in a 20-pin J-lead PLCC (9x9 mm) package, it operates from a 5.0 V (with 3.3 V tolerant I/O) supply and supports serial configuration data rates up to 6 MHz, enabling fast FPGA initialization at power-up. A configuration PROM is a non-volatile memory companion that holds the FPGA's bitstream and serially shifts it into the SRAM configuration cells each time the FPGA powers up, reinitializes, or requires new logic. Positioned inside the broader hierarchy as configuration memory -> serial EEPROM/PROM -> FPGA support IC -> programmable logic ecosystem, the EPC1213LC20 eliminates the need for external boot memory and lets engineers ship finished products with the FPGA's bitstream locked in from the factory. Key features include 212 Kbits of user-programmable flash/OTP storage, a dedicated serial configuration interface (DATA, DCLK, nCONFIG, nSTATUS, CONF_DONE pins), in-system programmability through the built-in IEEE 1149.1 JTAG chain, and support for compression (the FPGA can optionally decompress the bitstream during load). These capabilities allow the same PROM to serve multiple FPGA families as long as the bitstream size is below 212 Kbits. Technically, the EPC1213LC20 integrates a flash-based configuration controller plus a JTAG tap, allowing programming via standard boundary-scan tools. The 5.0 V core with 3.3 V I/O tolerance enables it to interface with both 5 V legacy FPGAs (APEX 20K, FLEX 10K, Mercury, Stratix) and 3.3 V devices (Cyclone, Cyclone II) on the same PCB, simplifying mixed-voltage designs. Typical applications include factory configuration of Altera/Intel APEX 20K, FLEX 10K, ACEX 1K, Cyclone, Cyclone II, Stratix, Stratix II, Mercury, APEX II, Arria GX, Stratix GX, and Stratix II GX FPGAs; production programming stations; test-and-measurement fixtures; and any embedded system that needs the FPGA bitstream to load automatically and reliably at every power-up. When designing with the EPC1213LC20, confirm that the target FPGA's compressed or uncompressed bitstream fits within the 212-Kbit budget (uncompressed Cyclone bitstreams for small logic designs are typical). For larger designs, consider the EPC1441 (442 Kbit) or EPC2 (1.6 Mbit) family members instead. Ensure nCONFIG, nSTATUS, and CONF_DONE pull-ups are present per the FPGA datasheet, and respect the JTAG chain order when multiple devices share the same scan path. This page synthesizes distributor stock status, drop-in-compatible configuration PROMs from the same EPC family, and design guidance not compiled in a single place in the original Altera datasheet, giving hardware engineers a faster sourcing and reference workflow.

RFQ Kontak
EPC1213LI20 - 212Kb OTP Serial Config PROM for FPGAs | Intel
EPC1213LI20

EPC1213LI20 - 212Kb OTP Serial Config PROM for FPGAs | Intel

The Intel (formerly Altera) EPC1213LI20 is a 212-kilobit one-time programmable (OTP) serial configuration PROM designed to store and load configuration bitstreams for SRAM-based Altera/Intel FPGAs, housed in a 20-pin PLCC (9x9 mm) package with industrial temperature grade support. It delivers a maximum configuration clock support suitable for FLEX, ACEX, APEX, Cyclone, Cyclone II, Stratix, Stratix GX, Stratix II, and Stratix II GX device families, and operates from a single 3.3 V or 5 V supply with multi-voltage I/O compatibility. A Configuration PROM is a non-volatile memory device that holds the FPGA configuration bitstream and serially transfers it to the SRAM-based FPGA at power-up, after system reset, or whenever reconfiguration is required. Because SRAM-based FPGAs lose their configuration when power is removed, the EPC1213LI20 eliminates the need for external boot ROMs or microcontrollers and shortens system bring-up time, sitting between the system power supply and the FPGA's configuration interface (typically 4-pin serial: nCS, DCLK, DATA, nCONFIG/DONE). Key features include 212 Kb of OTP storage (sufficient for mid-density FPGAs such as Cyclone EP1C12 or ACEX 1K EP1K30), serial interface (datasheet-recommended), 3.3 V/5 V VCC operation with 3.3 V or 5 V I/O tolerance, 20-pin J-lead PLCC footprint, and industrial operating temperature range. Programming is performed once via the FPGA-supported Jam STAPL or ByteBlaster flow; after programming the device retains its data permanently. The EPC1213LI20 implements Altera's active-serial (AS) configuration protocol with an internal oscillator that generates the configuration clock, removing the need for an external clock source during FPGA boot. Programming is performed once via the FPGA-supported Jam STAPL flow or via the ByteBlaster/USB-Blaster cable. Typical applications include industrial control FPGA platforms, factory automation controllers, prototyping boards for Cyclone/Stratix designs, and legacy Altera FPGA development kits where a stable, fixed bitstream is required without in-system updates. Engineers who later need to update the bitstream should select an EPCS or EPCQ serial flash instead. When designing with this device, place the EPC1213LI20 close to the FPGA's configuration pins, observe the nCONFIG/nSTATUS power-on timing sequence, and verify the FPGA's supported configuration mode matches the PROM's serial protocol. For multi-FPGA chains, multiple EPC devices can be cascaded using the nCASC signal, with the first device typically larger than the subsequent ones. This page synthesizes distributor pricing, drop-in Altera/Intel PROM alternatives, and practical design considerations not consolidated in the manufacturer datasheet alone.

RFQ Kontak
EPC1213PC8 - 212Kb OTP Config PROM 8-PDIP | Altera / Intel
EPC1213PC8

EPC1213PC8 - 212Kb OTP Config PROM 8-PDIP | Altera / Intel

The Altera EPC1213PC8 is a one-time-programmable (OTP) serial configuration memory designed to load the configuration bitstream into Altera FLEX-series and APEX-series FPGAs at power-up, supplied in an 8-pin plastic DIP (PDIP) through-hole package. The device stores 212 Kbits of configuration data and presents them serially to the target FPGA through a 4-pin industry-standard configuration interface (nCS, DCLK, DATA, OE) at the FPP or PS configuration mode speed. Operating from a single 3.3 V supply, the EPC1213PC8 supports a configuration clock up to 6 MHz and is specified over the commercial 0 °C to +70 °C temperature range. OTP configuration PROMs are non-volatile serial memories used to retain FPGA bitstream data while the host system is powered down, so the FPGA can self-configure at every power-on without a separate microcontroller or boot flash. EPC1-family members belong to the broader EEPROM-based configuration-PROM hierarchy (serial configuration PROM -> configuration memory IC -> programmable logic support -> programmable logic device ecosystem), bridging the FLEX/APEX FPGA family and modern EPCQ/Avalon-ST configuration memories. The EPC1213PC8 is built on a 5 V CMOS EEPROM cell with on-chip charge-pump and oscillator, packaged in an 8-pin PDIP with a typical standby current below 50 µA. The OTP array is programmed via IEEE Std 1532 / Jam STAPL using Altera's programming hardware, after which the device becomes read-only. Internal address-counter auto-increment and a dedicated open-drain OE pin simplify the interface to the FPGA's CONF_DONE / nCONFIG pins. Typical applications include legacy FLEX 6000 / FLEX 8000 / FLEX 10K / APEX 20K board boot storage, industrial control retrofits, and replacement designs for end-of-life Altera FPGAs in long-lifecycle equipment. The 8-pin PDIP form factor is also convenient for bench programming fixtures and low-volume manufacturing. When designing with the EPC1213PC8, observe that nCS must toggle before DCLK and that OE must follow the FPGAs nSTATUS-to-high transition. Decoupling of 100 nF close to VCC is required; the device shares its pinout with EPC1064/EPC1441 in the same 8-PDIP. For legacy multi-FPGA chains, cascade multiple EPC1213PC8 devices to expand storage beyond 212 Kb, with each PROM driving the next PROM's nCS via its OE pin.

RFQ Kontak