Mga Produkto (44,000+)

ICS1526GT - 110MHz Clock Synthesizer | Renesas | Video
ICS1526GT

ICS1526GT - 110MHz Clock Synthesizer | Renesas | Video

Renesas Electronics ICS1526GT is a 110 MHz clock and frequency synthesizer IC with one clock output in a 16-pin TSSOP package measuring 4.40 mm wide. It is designed for general-purpose phase-controlled clock synthesis and for line-locked or genlocked high-resolution video systems. A clock synthesizer is an integrated timing circuit that generates or organizes clock signals for another circuit. Within the broader semiconductor hierarchy, the ICS1526GT belongs to the clock and timing IC family, where it sits between a basic oscillator and a more complex PLL-based clock-generation solution. Its frequency-generation architecture allows a system to derive synchronized timing for video projection, display, and other phase-sensitive equipment. The principal rated operating frequency is 110 MHz, and the device provides one clock output in a 16-TSSOP package. The 4.40 mm package width supports compact, surface-mount PCB construction without using a large through-hole footprint. Its low-voltage CMOS mixed-mode process technology combines digital timing functions with analog phase-control behavior, which is useful when multiple system clocks must remain aligned. The ICS1526GT is particularly suited to general-purpose phase-controlled clock synthesis. In a video projector or display, timing relationships determine pixel synchronization and image stability. Line-locked and genlocked operation allows the generated clock to remain referenced to an external video signal, helping downstream circuits reproduce stable horizontal and vertical timing. The 110 MHz operating point also provides a useful reference point for timing designs requiring precise phase alignment. Typical uses include video projectors, professional displays, broadcast-compatible video equipment, line-locked timing modules, genlock distribution systems, and clock-generation boards. The same synthesizer can also serve as the timing reference in an industrial imaging system when its operating conditions, lock behavior, and electrical limits match the intended source and output architecture. When designing around the ICS1526GT, preserve the manufacturer’s recommended input, output, and decoupling arrangements. Signal-integrity performance depends on keeping the clock route compact, providing a stable reference source, and observing the allowable loading and timing ranges. Because phase-control and synchronization behavior are central to this device, evaluate the complete external loop rather than judging suitability from the 110 MHz headline frequency alone. This product page combines the manufacturer’s clock-generation description with the 110 MHz frequency, single-output configuration, 16-TSSOP package information, practical application guidance, and verified source links. It also identifies the sourcing and engineering questions that should be resolved before the device is placed into a new line-locked, genlocked, or phase-controlled timing design.

RFQ Kontak
ICS1574BM - Programmable Laser Clock Generator | Renesas
ICS1574BM

ICS1574BM - Programmable Laser Clock Generator | Renesas

Renesas Electronics ICS1574BM is a user-programmable laser engine pixel clock generator built around a monolithic phase-locked-loop frequency synthesizer. It generates the timing signals required by laser-engine imaging systems and is specified in a 16-pin SOIC package. The device description identifies advanced CMOS mixed-mode PLL technology, combining programmable frequency synthesis with clock-generation functionality in one integrated circuit. A phase-locked loop, or PLL, is a feedback-controlled frequency synthesizer that locks an internally generated output to a reference clock. By phase-locking the output to a stable reference, the ICS1574BM provides a controlled relationship between its program settings and the resulting laser-engine pixel timing. This makes it part of the broader clock and timing IC hierarchy: pixel clock generator, PLL frequency synthesizer, clock-generation IC, timing IC, and semiconductor. The principal feature of the ICS1574BM is user programmability. Programming lets a laser-imaging system tune pixel-clock behavior for different operating conditions instead of relying on a fixed-frequency output. The monolithic construction reduces the number of separate frequency-synthesis components, while the CMOS mixed-mode architecture combines analog phase detection with digital control functions. The 16-SOIC package also provides a compact surface-mount option for laser-engine electronics. The ICS1574BM is specifically positioned for laser-engine applications, where pixel timing must remain synchronized with scanning, modulation, and image-processing systems. Its frequency-synthesizer architecture makes it relevant where adjustable clock generation and deterministic reference locking are required. Because exact operating limits and programming electrical characteristics are defined by the manufacturer datasheet, system designs should verify output-frequency range, reference-input requirements, jitter, supply voltage, and acquisition time against the intended optical configuration. Typical deployments include laser projection engines, scanning-laser systems, optical inspection equipment, and image-generation assemblies. In each case, the clock generator provides the programmable timing foundation needed to coordinate pixel generation with downstream drivers and controllers. The integration of PLL synthesis and pixel-clock generation is particularly useful when component count, board area, and synchronization control are important design constraints. A robust implementation should route the reference clock cleanly, keep programming-interface traces away from sensitive feedback paths, and follow the recommended bypass-capacitor and grounding layout in the manufacturer datasheet. Designers should also validate startup, lock behavior, and output jitter across the complete temperature range of the assembled laser engine rather than evaluating only nominal bench conditions. This product page combines the device identity, package information, application engineering guidance, datasheet links, and cross-reference findings into a design-focused reference. It also distinguishes the verified operating concept of the ICS1574BM from specifications that must be confirmed directly in the manufacturer datasheet before schematic release or production qualification.

RFQ Kontak
ICS180M-01 - Low EMI Clock Generator | Renesas Electronics
ICS180M-01

ICS180M-01 - Low EMI Clock Generator | Renesas Electronics

The Renesas Electronics ICS180M-01 is a low-EMI, single-output spread-spectrum clock generator with a maximum output frequency of 28 MHz in an 8-pin SOIC package. It accepts either a clock or crystal input, produces a CMOS output, and provides a 1:1 input-to-output ratio. The device uses a proprietary combination of analog and digital phase-locked-loop technology to generate a low-EMI output clock. A spread-spectrum clock generator is a clock and timing IC that varies clock energy over a controlled frequency band. This technique reduces narrowband electromagnetic emissions by distributing clock energy across multiple frequencies rather than concentrating it around one carrier. In the broader semiconductor hierarchy, the ICS180M-01 belongs to clock and timing ICs, PLL-based clock synthesis, and broader frequency-generation and timing-control devices. The ICS180M-01 supports both clock and crystal input, giving a designer flexibility when the board already contains a reference oscillator or requires operation from a crystal. Its single CMOS output is suitable for systems that need one low-EMI clock domain. The 28 MHz maximum output frequency covers applications requiring moderate-speed digital clock distribution, although the minimum operating frequency and detailed timing limits are not stated in the available product records. The central architectural feature is the proprietary mix of analog and digital PLL technology. A PLL locks the generated output to the selected reference, while spread-spectrum modulation controls the clock spectrum and reduces electromagnetic interference concentration. The device contains one clock-generation circuit, and its stated 1:1 input-to-output ratio indicates that the output frequency follows the input reference without a stated frequency multiplication or division ratio. Typical uses include EMI-sensitive digital control systems, communications equipment, industrial electronics, and clock-distribution subsystems in which reducing narrowband clock radiation is important. The device can also serve as a low-EMI reference-clock source in equipment with multiple digital subsystems, provided the reference frequency and all timing requirements remain within the device's operating limits. PCB implementation should preserve a short, controlled return path from the input reference and provide a clean supply connection to the clock generator. Decoupling should follow the manufacturer application guidance, and unused input or output states should be handled according to the datasheet rather than inferred from the brief device description. Differential clock-impedance requirements should be checked before using the CMOS output in a high-speed or length-sensitive topology. This product record combines the device's key functional characteristics, sourcing information, and design-oriented comparison points. It also distinguishes the confirmed 180M-01LF drop-in candidate from unverified similarly named clock ICs, helping engineers identify replacements without confusing functional similarity with guaranteed pin compatibility.

RFQ Kontak
ICS180M-03 - 28MHz Low EMI Clock Generator | Renesas
ICS180M-03

ICS180M-03 - 28MHz Low EMI Clock Generator | Renesas

Renesas ICS180M-03 is a low-EMI spread-spectrum clock generator that accepts a clock or crystal input and produces a CMOS output clock with a maximum frequency of 28 MHz. The device uses mixed analog and digital phase-locked-loop technology to reduce electromagnetic interference. It is packaged in an 8-pin SOIC measuring 0.154 inch, or 3.90 mm, in width and operates from 3.135 V to 5.5 V. A spread-spectrum clock generator is a clock and timing IC that deliberately varies clock frequency over a defined range. This frequency spreading distributes spectral energy across multiple bins, reducing the peak conducted and radiated emissions produced by a narrowband digital clock. The ICS180M-03 belongs to the clock generator, PLL, and frequency-synthesizer hierarchy within clock and timing semiconductor products. The principal features of the ICS180M-03 include one clock-generating circuit, support for either clock or crystal inputs, CMOS output logic, and a 1:1 input-to-output frequency ratio. Its maximum operating output frequency is 28 MHz. These characteristics make it suitable for systems that require a low-EMI reference clock while retaining a conventional, single-output clock architecture. Internally, the device combines analog and digital phase-locked-loop functions. The PLL locks the generated output to the external clock or crystal reference, while spread-spectrum operation broadens the output spectrum and lowers its peak frequency concentration. The manufacturer datasheet describes this combination as a method for producing a low-EMI output clock while preserving accurate frequency generation. Typical applications include EMI-sensitive digital equipment, interface and communication modules, embedded control systems, and general-purpose clock-distribution designs. In each case, the part can provide the system timing reference while limiting narrowband emissions from the associated clock line. The 8-SOIC surface-mount package also supports standard automated PCB assembly and compact board-space utilization. When designing around the ICS180M-03, preserve the recommended input, output, and decoupling connections described in the manufacturer datasheet. Pay particular attention to crystal or clock-source stability because a phase-locked-loop generator derives its output from that reference. Confirm the intended supply voltage, output loading, trace topology, and EMI target before releasing the PCB layout. This product page combines the device specifications, sourcing guidance, application context, and practical design considerations engineers need when evaluating the ICS180M-03 for a low-EMI clock-generation design.

RFQ Kontak
ICS180M-51 - 28MHz Low EMI Clock Generator | Renesas
ICS180M-51

ICS180M-51 - 28MHz Low EMI Clock Generator | Renesas

The Renesas Electronics ICS180M-51 is a low-EMI single-output spread-spectrum clock generator that operates from a clock or crystal input. It combines IDT proprietary analog and digital phase-locked-loop technology, supports a maximum frequency of 28 MHz, and provides a CMOS output with a 1:1 input-to-output ratio. The device is offered in an 8-pin SOIC package. A clock generator is an integrated circuit that produces a stable timing reference for digital systems. It may accept an existing reference clock or a crystal and use a phase-locked loop, or PLL, to create a related output frequency. Clock generators are used to support processor timing, data conversion, communications, storage, and other digital subsystems. The ICS180M-51 belongs to the clock generator and timing-IC hierarchy rather than the general-purpose logic IC category. The central feature of the ICS180M-51 is its low-EMI output. According to the ICS180-51 datasheet, the device offers center-spread selections of ±0.625% and ±1.875%. These selections allow a clock's spectral energy to be distributed across a wider frequency range, which can reduce the peak magnitude of narrowband emissions when used as an EMI mitigation technique. The single output stage uses CMOS signaling and has a listed 1:1 input-to-output ratio. The ICS180-51 combines analog and digital PLL functions to derive its output from a clock or crystal input. This architecture allows a single device to operate as a low-EMI clock generator rather than requiring a separate fixed-frequency oscillator arrangement. The Renesas datasheet also identifies related MK1714-01 and MK1714-02 devices as references for a wider selection of input frequencies and multipliers when a design requires more flexible frequency translation than the ICS180-51 provides. Typical uses include EMI-sensitive digital equipment, communications equipment, and systems requiring a low-EMI clock derived from an existing reference. The device is also suitable where spread-spectrum clocking is used to reduce discrete spectral components. It can serve as a timing reference for processors, interface circuits, converters, and other clocked digital logic where a CMOS output at up to 28 MHz is required. When designing around the ICS180M-51, first confirm that the source frequency, selected spread mode, and required output frequency are supported by the device configuration. Place the clock input and output traces for controlled impedance and maintain short return paths to the device ground pins. Verify conducted and radiated emissions at the finished-product level because spread-spectrum timing alone does not establish regulatory compliance. This page consolidates the device type, operating limits, spread-spectrum selections, package information, sourcing guidance, and design cautions into one engineering reference. It also provides practical application analysis, alternative-part qualification guidance, and a structured comparison framework for evaluating the ICS180M-51 against other low-EMI clock-generator options.

RFQ Kontak
ICS2402M - Multiplier Zero Delay Buffer | Renesas
ICS2402M

ICS2402M - Multiplier Zero Delay Buffer | Renesas

The Renesas ICS2402M is a multiplier and zero-delay buffer integrated circuit with one single-ended LVCMOS output, supplied in an 8-pin SOIC package. The device uses ICS proprietary analog/digital phase-locked-loop techniques to multiply an input clock and reproduce a buffered clock output with low propagation delay. Its clock-buffer function makes it suitable for clock distribution, frequency conversion, communications, industrial control, and other systems requiring a multiplied or redistributed clock signal. A zero-delay buffer, or ZDB, is a clock and timing semiconductor that combines frequency multiplication or conditioning with buffered clock propagation. In the broader product hierarchy, ICS2402M belongs to clock and timing ICs and ultimately to the semiconductor category. Unlike a passive resistor-and-capacitor delay line, an active ZDB uses PLL techniques to establish the output relationship and provide a low-delay clock output. The verified product information identifies the ICS2402M as a multiplier and zero-delay buffer, with one LVCMOS output and a single-ended signal arrangement. The 8-SOIC package supports conventional surface-mount PCB assembly. Verified distributor information also identifies the component as lead-free and RoHS compliant. Exact operating limits, supply-voltage range, supported multiplication ratios, frequency range, output impedance, and timing tolerances were not present in the supplied source excerpts and therefore require confirmation from the manufacturer datasheet before design release. Technically, the ICS2402M integrates analog and digital PLL methods to multiply a reference clock while buffering the result. This architecture is intended to reduce the timing penalty normally encountered when a system must distribute a clock derived from a lower-frequency reference. The single-ended LVCMOS interface can simplify connection to conventional digital logic, but signal-integrity review remains necessary because PLL multipliers can amplify supply noise and produce clock-related harmonics. Typical uses include processor and communications clock generation, frequency-interface bridging, industrial data-acquisition systems, and retrofit designs requiring a clock output derived from an existing reference. In each case, the designer must confirm that the selected multiplier ratio, input frequency, output frequency, and supply voltage fall within the limits documented for the exact ICS2402M ordering configuration. For implementation, begin by reviewing the pin assignment and recommended decoupling in the manufacturer datasheet, then validate the output waveform with the intended clock load. Keep the clock trace short where possible, provide a clean return path, and account for PLL lock and startup behavior in the system timing budget. Because the verified excerpts do not provide the complete timing table, board release should be conditional on checking the official electrical characteristics and reference circuit. This product record combines verified device identity, package, interface, regulatory, and sourcing information with application-specific design guidance. It also separates confirmed facts from parameters that remain unavailable, helping engineers distinguish source-backed characteristics from values that still require datasheet confirmation.

RFQ Kontak
ICS252PM - 200MHz Dual-Output Clock Synthesizer | Renesas
ICS252PM

ICS252PM - 200MHz Dual-Output Clock Synthesizer | Renesas

The Renesas Electronics ICS252PM is a field-programmable dual-output spread-spectrum VersaClock synthesizer with an operating output-frequency range up to 200 MHz in an 8-SOIC package. The device generates two independently programmable output frequencies and is intended for clock and frequency-distribution systems requiring programmable frequency generation with spread-spectrum clocking. A clock synthesizer is a clock-and-timing integrated circuit that generates or distributes one or more related clock signals. In the broader hierarchy, ICS252PM belongs to the clock generator and frequency synthesizer family, within clock and timing ICs and ultimately the semiconductor category. Its dual-output architecture can reduce the number of separate oscillator and distribution components required in a system. The verified product information identifies ICS252PM as a low-cost, field-programmable, dual-output clock synthesizer capable of generating two output frequencies from 314 kHz to 200 MHz. The 200 MHz upper limit makes the device applicable to communication equipment, storage systems, computer peripherals, and other systems requiring a programmable clock. Spread-spectrum operation can reduce peak spectral concentration, although exact modulation settings and implementation limits must be confirmed in the manufacturer datasheet. The ICS252PM uses independently programmable output stages rather than a fixed-frequency oscillator arrangement. This allows one device to serve multiple clock domains when two related but unequal frequencies are required. Because it is a digital-programmable clocking component, board design should account for trace propagation, output loading, supply integrity, and EMI behavior associated with high-frequency clock distribution. The part is offered in an 8-SOIC package, providing a conventional surface-mount footprint for PCB assembly. In an 8-SOIC, the exact pin names, programming interface, supply voltage, output-drive capability, operating-temperature range, and electrical limits are not supplied in the verified excerpts and are therefore identified as data needed rather than estimated. Typical uses include clock generation for networking and communication equipment, read/write timing in storage systems, industrial control electronics, and embedded computing platforms. Validate the required frequency range, jitter, skew, supply voltage, and output configuration against the complete manufacturer datasheet before releasing a production design. This product record combines verified distributor identification, package and frequency information, sourcing links, application guidance, and practical selection criteria. It distinguishes explicitly verified facts from parameters that still require confirmation, helping engineers avoid unsupported assumptions while locating an ICS252PM replacement or equivalent.

RFQ Kontak
ICS270PG - 200MHz Triple-PLL VCXO Clock Synthesizer | Renesas
ICS270PG

ICS270PG - 200MHz Triple-PLL VCXO Clock Synthesizer | Renesas

Renesas Electronics Corporation ICS270PG is a field-programmable voltage-controlled crystal oscillator and triple-PLL clock synthesizer that generates up to eight high-quality, high-frequency clock outputs. It supports a maximum frequency of 200 MHz, uses a crystal input, provides CMOS outputs, includes PLL bypass, and is packaged in a 20-pin TSSOP measuring 0.173 inch, or 4.40 mm, wide. A clock synthesizer is an integrated timing device that accepts a reference source and derives one or more stable, programmable clock outputs for digital systems. A VCXO adds voltage-controlled frequency adjustment to the crystal reference, while a PLL multiplies or divides that reference to produce the required output frequencies. The ICS270PG combines both functions in a clock and timing IC, allowing one reference crystal to serve multiple clock domains. Its principal features include three phase-locked loops, PLL bypass capability, one internal clock circuit, a crystal reference input, and CMOS output signaling. The synthesizer can generate as many as eight outputs, including multiple reference clocks originating from a low-frequency reference source. This output flexibility reduces the number of separate oscillators required in systems requiring related but unequal clock rates. The triple-PLL architecture separates clock-generation functions that might otherwise require multiple oscillator and divider combinations. PLL bypass is useful during configuration, test, or operating conditions where a directly derived clock path is preferred. CMOS outputs are suitable for interfacing with modern digital logic, while the 200 MHz maximum output frequency supports demanding processor, communications, data-conversion, and industrial control clock trees. Typical applications include communications infrastructure, instrumentation, industrial automation, test and measurement equipment, data-acquisition systems, and embedded control platforms. In each case, the device can centralize multiple clock requirements around a crystal reference and provide programmable outputs instead of requiring a separate oscillator for each frequency domain. The multiple reference outputs can support communication links, data converters, memory interfaces, and digital control logic within one clock tree. The principal design consideration is the device's programmed configuration and the resulting relationships among its three PLLs, reference outputs, and output dividers. Review the manufacturer datasheet's pin-description table, recommended external components, clock-output constraints, and programming procedure before laying out a new board. PCB placement should minimize clock traces and keep the crystal and associated components close to the device. This product page summarizes the documented architecture, package information, output capability, and practical design considerations of the ICS270PG. It also distinguishes verified technical facts from details that still require confirmation from the manufacturer datasheet, helping engineers plan the architecture without overlooking programming, layout, or qualification work.

RFQ Kontak
ICS271PG - Triple PLL VCXO Clock Synthesizer | Renesas
ICS271PG

ICS271PG - Triple PLL VCXO Clock Synthesizer | Renesas

The Renesas Electronics ICS271PG is a triple-PLL, field-programmable VCXO clock synthesizer that generates up to six high-quality clock outputs and operates up to 200 MHz in a 20-pin TSSOP package. It accepts a crystal input, provides CMOS outputs, supports PLL bypass, and combines one clock-synthesis circuit with multiple reference and high-frequency outputs. These characteristics make it suitable for systems that require flexible clock generation from a low-frequency crystal source. A VCXO, or voltage-controlled crystal oscillator, is a clock-generation technique in which an oscillator’s frequency can be controlled by an external voltage. A field-programmable VCXO clock synthesizer extends that concept by combining crystal-referenced timing with programmable phase-locked loops and selectable output divisions. Within the broader hierarchy, the ICS271PG belongs to the clock and timing IC category, specifically the PLL and frequency-synthesizer class, and can replace multiple discrete crystal and oscillator arrangements when system designers need several related frequencies from one reference. Key features include three PLL capability, up to six generated clock outputs, a maximum frequency of 200 MHz, CMOS output logic, crystal input, and PLL bypass operation. The six-output architecture supports systems that need both reference clocks and higher-frequency working clocks. Field programming allows the device to be configured for different output requirements, while PLL bypass provides a path for systems that need to select between synthesized and direct-reference operating conditions during design or validation. Technically, the ICS271PG uses a crystal-referenced architecture with programmable PLL and output stages. The low-frequency crystal source establishes a stable reference from which the internal synthesis circuitry can derive multiple clock outputs. CMOS output signaling supports integration with digital logic operating in the same clock domain. Because the device is controlled through VersaClock software according to its documentation, configuration should be completed with the intended output frequencies, divider relationships, and operating modes validated together rather than selected independently. Typical applications include communications equipment, interface controllers, digital signal processing systems, test and measurement instruments, and embedded systems that require several coordinated clock outputs. It can also serve clock-distribution designs where a central synthesizer offers a more scalable alternative to multiple separately sourced oscillators. In each case, the main design benefits are centralized referenceing and programmable output relationships. The primary design consideration is preserving clean, deterministic clock behavior across every enabled output. Use the manufacturer’s configuration procedure, validate each output against its assigned load, and check startup and bypass transitions with the final system timing budget. PCB layout should follow the datasheet guidance for crystal connections, supply decoupling, and output routing to minimize jitter and crosstalk. This page organizes the device’s clock-generation characteristics, drop-in candidate listings, application guidance, and engineering design considerations. It is intended to help engineers compare the ICS271PG with equivalent field-programmable clock synthesizers before committing to a board design or production sourcing plan.

RFQ Kontak
ICS275PG - 200MHz Triple-PLL VCXO Clock Synthesizer | Renesas
ICS275PG

ICS275PG - 200MHz Triple-PLL VCXO Clock Synthesizer | Renesas

The Renesas Electronics ICS275PG is a triple-PLL field-programmable VCXO clock synthesizer with a maximum output frequency of 200 MHz, supplied in a 16-pin TSSOP surface-mount package. It operates from a 3.135 V to 3.465 V supply, accepts a crystal reference input, provides CMOS clock outputs, and can generate as many as four high-quality clock outputs. A VCXO, or voltage-controlled crystal oscillator, is a clock-generation architecture that combines a crystal oscillator with voltage-controlled frequency adjustment. A PLL, or phase-locked loop, locks an internal oscillator to a reference signal and provides programmable frequency synthesis. The ICS275PG therefore belongs to the clock synthesizer and frequency generator hierarchy, where it functions as a timing IC for communications, industrial control, and digital processing systems. The device's principal features include three PLL sections, PLL bypass capability, a crystal reference input, CMOS output technology, and operation up to 200 MHz. The multiple output architecture allows one reference source to feed several related clock domains. Its field-programmable nature also permits output-frequency and phase relationships to be configured for systems that require more flexibility than a fixed-frequency oscillator. The ICS275PG uses a 3.3 V-class supply range centered on the conventional 3.3 V operating point. Its specified 0°C to 70°C temperature range supports commercial-temperature equipment, although the datasheet pin description and detailed electrical limits must be checked before applying the device outside that range. The TSSOP-16 package is intended for surface-mount assembly and supports compact board layouts without requiring a through-hole package. Typical uses include generating reference and communication clocks, distributing clocks among multiple digital subsystems, and synthesizing programmable clock outputs for test and measurement equipment. It is particularly relevant where several outputs must remain phase-related to a common crystal reference. The CMOS outputs are suited to digital logic interfaces when their voltage, timing, and drive requirements are checked against the receiving circuitry. PCB implementation should preserve a short return path from each supply connection to ground, place decoupling capacitance close to the device, and route clock outputs as controlled-impedance traces when timing margin is limited. Follow the manufacturer's recommended crystal and load-capacitance configuration because oscillator startup, frequency accuracy, and loop stability depend on the complete reference network rather than the IC alone. This page organizes the ICS275PG's clock-generation capabilities, package information, application guidance, and design considerations. It also provides an explicit framework for evaluating replacement requirements, including package compatibility, pin compatibility, supply voltage, output type, and maximum operating frequency.

RFQ Kontak
ICS276PG - Triple PLL 200MHz VCXO | Renesas Electronics
ICS276PG

ICS276PG - Triple PLL 200MHz VCXO | Renesas Electronics

The Renesas Electronics ICS276PG is a triple-PLL field-programmable VCXO clock synthesizer with three clock outputs, a maximum frequency of 200 MHz, crystal input, and CMOS output in a 16-pin TSSOP package. It operates from a 3.135 V to 3.465 V supply and includes a PLL bypass function for flexible clock-generation architectures. A VCXO is a voltage-controlled crystal oscillator, while a clock synthesizer combines oscillator and programmable frequency-generation functions into a timing IC. The ICS276PG belongs to the clock and frequency synthesizer category, within the broader clock and timing IC and semiconductor hierarchies. Its architecture is intended to generate multiple related clock outputs from a reference source while supporting frequency programming and PLL bypass operation. Three independently available output positions provide flexible clock distribution for systems that require multiple reference or working clocks. A maximum output frequency of 200 MHz makes the device suitable for communications, control, test, instrumentation, and digital processing systems operating from a single reference crystal. CMOS outputs support integration with modern digital logic, while the field-programmable architecture simplifies adaptation across different clock plans. The ICS276PG uses a single PLL circuit with bypass capability and accepts a crystal reference. PLL synthesis enables the device to derive one or more output frequencies from the reference, while bypass provides a path for configurations that require the reference clock directly. The 3.135 V minimum and 3.465 V maximum supply limits indicate a narrow, regulated 3.3 V operating environment, so the system supply must remain within that range during startup, steady-state operation, and frequency changes. Typical uses include communications transceiver clocking, instrumentation clock trees, embedded-control reference generation, FPGA or processor timing support, and multi-output laboratory systems. Its three-output architecture is especially useful when several logic domains need coherent clocks, although jitter, supply-noise behavior, output configuration, and programming details must be checked against the complete manufacturer datasheet before high-volume clock-tree deployment. A key implementation consideration is the relationship between the 3.3 V supply tolerance and the device specification. Decoupling should be placed close to the supply pins, the crystal network must follow the recommended layout, and every output must be checked for the required frequency, amplitude, and loading. Avoid assigning functions to a pin until its output configuration and routing requirements have been confirmed in the pin-description table.

RFQ Kontak
ICS280PG - 200MHz Triple PLL Spread Spectrum Clock Generator | Renesas Electronics
ICS280PG

ICS280PG - 200MHz Triple PLL Spread Spectrum Clock Generator | Renesas Electronics

The Renesas Electronics ICS280PG is a field programmable triple-PLL spread spectrum clock synthesizer that generates up to four high-quality CMOS clock outputs with a maximum frequency of 200 MHz, packaged in a 16-pin TSSOP (0.173 in / 4.40 mm wide) surface-mount package. A clock generator is a timing IC that converts a single reference input into multiple synchronized output clocks. A clock synthesizer adds phase-locked loop (PLL) multiplier and divider stages so one low-frequency crystal or clock reference can drive many higher or lower frequency domains. A spread spectrum clock generator additionally dither the output edge position over time, spreading electromagnetic energy across a band and reducing peak radiated emissions. The ICS280PG combines all three functions in one device: reference conditioning, triple-PLL synthesis, and four-way clock fanout with spread spectrum modulation. Key features of the ICS280PG include three independent PLL blocks with a bypass mode, up to four CMOS outputs, a maximum output frequency of 200 MHz, and field programmability of the synthesis and modulation parameters. Accepting either a crystal or an external clock as reference, the device lets a designer change output frequencies and modulation profiles without changing the board layout. Its 16-TSSOP body keeps the footprint compact enough for cost-sensitive consumer, industrial and networking equipment while supporting surface-mount assembly at line speed. Architecturally the part pairs a programmable reference stage with three PLL multipliers and dividers feeding four CMOS output buffers. Because each PLL can be bypassed, the same device can pass the reference through unmodified for one clock domain while synthesizing two additional domains, which simplifies clock tree design in systems that mix legacy and modern clock requirements. CMOS output drive gives rail-to-rail compatible levels for downstream CMOS logic, and spread spectrum modulation reduces the spectral peak of the fundamental without changing the average output frequency. Typical applications include server and storage platform clock trees, set-top box and digital set-top clocking, networking equipment with multiple clock domains, industrial control modules, and any consumer or embedded product where radiated emissions must be reduced to meet EMC limits while keeping a single reference source. When designing around the ICS280PG, treat the reference input and output routing as a controlled-impedance clock network and check the datasheet pin description table before assigning tracks; spread spectrum modulation only reduces emissions if the downstream traces and connectors do not act as antennas. This page adds practical context that a manufacturer datasheet alone does not provide: a parameter-by-parameter comparison table, drop-in ordering alternatives with the temperature and packaging differences made explicit, and design notes covering PLL bypass, spread spectrum settings and EMI verification practice.

RFQ Kontak
ICS281PG - 200 MHz Triple-PLL Clock Synthesizer | Renesas
ICS281PG

ICS281PG - 200 MHz Triple-PLL Clock Synthesizer | Renesas

Renesas Electronics ICS281PG is a field-programmable triple-PLL spread-spectrum clock synthesizer with a maximum output frequency of 200 MHz, one synthesizer circuit, CMOS outputs, and a 16-pin TSSOP package measuring 4.40 mm in width. It accepts either a clock or crystal reference input and provides a programmable input-to-output ratio of 1:3. A clock synthesizer generates stable timing signals from a lower-frequency reference and, in this case, uses three phase-locked loops to produce multiple high-frequency outputs. The PLL-based approach belongs to the clock and timing IC hierarchy, where frequency synthesis supports processor clocks, communications infrastructure, storage interfaces, and other digital systems requiring controlled clock distribution. The principal feature is the combination of triple-PLL architecture, field programmability, and spread-spectrum clock generation. Bypass operation gives the design team a way to move between the synthesized and reference-clock paths, while CMOS output signaling supports integration with compatible digital logic. The 200 MHz maximum frequency makes the device suitable for clock trees operating below that limit. The ICS281 family provides up to three clock outputs, including multiple reference clocks according to the manufacturer documentation. The 1:3 ratio identifies a supported clock-generation relationship, while field programming allows configuration through the device's programming interface. These features make the ICS281PG more versatile than a fixed-frequency oscillator for systems that require programmable timing and controlled spectral spreading. Typical applications include communications equipment, network interface clock trees, high-speed digital processing systems, storage controllers, and clock-generation blocks in industrial equipment. Spread-spectrum operation can reduce narrowband emissions, making the device useful when electromagnetic compatibility is important. Designers must still verify each output's frequency, jitter, duty-cycle, and modulation limits against the target system requirements. The principal design consideration is preserving clean, low-jitter reference distribution to every PLL. Use the recommended reference and loop-filter network from the manufacturer datasheet, keep clock traces short, and provide solid return paths beneath high-speed signals. Decoupling should be placed close to supply pins, while output buffering or additional clock drivers may be needed for fanout beyond the device's intended loading. This page consolidates the documented 200 MHz frequency capability, triple-PLL architecture, programming features, package data, sourcing guidance, and practical clock-tree considerations. It also distinguishes confirmed drop-in candidates from lower-confidence engineering options so that schematic and PCB decisions can be checked before production release.

RFQ Kontak
ICS290PG - 200MHz Triple PLL Clock Synthesizer | Renesas
ICS290PG

ICS290PG - 200MHz Triple PLL Clock Synthesizer | Renesas

Renesas Electronics ICS290PG is a field-programmable, triple-PLL spread-spectrum clock synthesizer with a maximum frequency of 200 MHz, CMOS outputs, and support for clock or crystal inputs. The device generates up to eight high-quality high-frequency clock outputs, including multiple reference clocks, and is packaged in a 20-pin TSSOP package identified as PGG20. Its programmable architecture makes it suitable for systems that require controlled clock generation, frequency synthesis, or spread-spectrum operation. A clock synthesizer is an integrated circuit that derives one or more stable timing signals from a reference clock or crystal. Clock and timing ICs sit within the broader timing-control hierarchy used by processors, communications equipment, storage systems, and test instrumentation. A PLL-based synthesizer can multiply, divide, or otherwise derive clock frequencies while providing programmable output arrangements and phase-related reference signals. The ICS290PG uses three PLL sections to produce multiple related outputs from a common reference source. Its operating input types are clock or crystal, while its output logic is CMOS. The stated input-to-output ratio reaches 1:8, and the maximum generated frequency is 200 MHz. Spread-spectrum capability can help redistribute clock energy across a frequency band, which is useful where controlled spectral spreading is desirable for system timing, interface, or electromagnetic-interference considerations. The PGG20 package offers 20 pins and an operating temperature range from -40 °C to +85 °C. The device is identified as lead-free and is supplied in a tube for the cataloged ordering configuration. Pin functions, programmable register details, reference-frequency limits, output configurations, jitter characteristics, supply-voltage range, and package dimensions must be confirmed in the manufacturer datasheet before a new board layout is released. Typical clock-tree applications include processor and controller timing, communications equipment, data-converter systems, storage controllers, and instrumentation. In a communications design, the ICS290PG can create a system clock and reference outputs from one source. In processor-based equipment, it can provide programmable frequencies while reducing the number of independent oscillators and associated distribution components. The main design consideration is validating the complete clock architecture. The reference input, PLL programming values, output enable sequence, trace topology, and downstream jitter requirements must be evaluated together. Short, controlled clock routes and proper return paths help preserve signal quality, while an output-termination strategy should follow the impedance of the PCB and the receiving device. This page combines verified device characteristics, application guidance, pin and package constraints, comparison fields, and replacement guidance. It is structured to help engineers identify whether the ICS290PG meets the required frequency, output-count, logic, temperature, and package conditions before committing a PCB footprint or production BOM.

RFQ Kontak
ICS291PG - 200MHz Triple-PLL Spread-Spectrum Clock | Renesas
ICS291PG

ICS291PG - 200MHz Triple-PLL Spread-Spectrum Clock | Renesas

The Renesas Electronics ICS291PG is a triple-PLL field-programmable spread-spectrum clock synthesizer with a maximum output frequency of 200 MHz, CMOS outputs, clock or crystal input, and PLL bypass capability. It is packaged in a 20-pin TSSOP package measuring 0.173 inches, or 4.40 mm, in width. The device generates up to six high-quality, high-frequency clock outputs and includes multiple reference-clock functions for clock-tree and interface designs. A spread-spectrum clock synthesizer is a clock-generation IC that varies clock timing over a programmed range to reduce peak electromagnetic emissions. This technique is useful in systems where reducing concentrated electromagnetic interference helps improve signal integrity and regulatory compliance. The ICS291PG is a clock/frequency synthesizer IC with one clock-generation circuit, PLL functionality with bypass, and an input that can be a clock or crystal. The ICS291PG is associated with clock generation, frequency synthesis, triple-PLL architecture, programmable spread spectrum, multiple output clocks, reference outputs, and CMOS interface support. Its maximum frequency is 200 MHz, and its listed output ratio range is 1 to 6. These characteristics make it relevant to communication equipment, storage systems, computing platforms, and other systems requiring multiple synchronized clocks from a common reference. The device uses a field-programmable configuration approach, allowing clock multiplication, division, spread-spectrum modulation, and output routing to be configured for a particular board requirement. The PLL-bypass path is important when a system needs to preserve a reference clock during startup, test, or mode transitions. Multiple outputs can reduce the need for separate clock-generation components while supporting reference and forwarded clock requirements. Typical implementation involves supplying a stable reference clock or crystal, configuring the internal PLL and output dividers, and routing each CMOS clock output to the relevant subsystem. Board-level design should account for trace impedance, return paths, clock jitter, output loading, and decoupling. Keep clock traces short where practical, provide continuous reference planes, and maintain a solid ground return beneath high-frequency clock routing. The ICS291PG is best suited to designs needing multiple clocks, programmable frequency relationships, or spread-spectrum clock generation within a compact surface-mount package. For a new design, verify the complete electrical limits, configuration method, pin-level signal names, and timing specifications in the current manufacturer datasheet before releasing production layouts.

RFQ Kontak
ICS308R - 200 MHz Quad PLL VersaClock | Integrated Device Technology
ICS308R

ICS308R - 200 MHz Quad PLL VersaClock | Integrated Device Technology

The Renesas Electronics ICS308R is a serially programmable quad-PLL VersaClock synthesizer with a 250 kHz to 200 MHz output-frequency range and support for up to six simultaneous output frequencies. It is packaged in a 20-pin SSOP surface-mount package and operates from a 3 V to 3.6 V supply. A PLL clock synthesizer, also called a frequency synthesizer, generates or distributes multiple clock signals from one or more reference inputs. The ICS308R belongs to the clock-generator and timing-control hierarchy, where accurate frequency generation is used to synchronize digital processors, communications links, converters, and test equipment. The principal verified features are four PLL functions, serial programmability, on-the-fly output reprogramming, and as many as six independent output frequencies. These characteristics make the device useful when a system needs flexible clock-tree generation rather than one fixed oscillator. The 200 MHz maximum output makes it suitable for high-speed digital timing domains, while the 250 kHz lower limit supports slower control and interface clocks. The ICS308R is identified as a clock or frequency synthesizer IC with one input-side reference arrangement and multiple programmable outputs. Its frequency generation is controlled through a serial programming interface, allowing the system to adjust operating frequencies as operating modes change. The exact output count, programming levels, reference frequency, jitter, and propagation characteristics are not present in the supplied search data and should be confirmed from the manufacturer datasheet before final design release. Typical applications include communications infrastructure, networking equipment, industrial automation, test and measurement systems, embedded processors, and mixed-signal products requiring several related clock domains. The SSOP-20 package supports conventional surface-mount assembly, but its narrow pitch requires careful PCB layout and reliable land-pattern construction. When designing around the ICS308R, preserve the specified power-supply range, connect decoupling capacitors near the supply pins, and validate every programming sequence against the manufacturer timing requirements. Output frequency accuracy and clock-jitter performance depend on the reference source, loop configuration, output loading, and board implementation; these values are not stated in the supplied excerpts and are marked for verification.

RFQ Kontak
ICS308RI - 200MHz Quad-PLL Clock Synthesizer | Renesas
ICS308RI

ICS308RI - 200MHz Quad-PLL Clock Synthesizer | Renesas

The Renesas Electronics ICS308RI is a serial-programmable quad-PLL VersaClock synthesizer with an output frequency range from 250 kHz to 200 MHz. It can generate six different output frequencies simultaneously and is housed in a 20-pin SSOP package measuring 3.90 mm wide. The device combines four phase-locked loops with serial configuration, allowing a host processor to program multiple related clocks within one integrated circuit. A PLL clock synthesizer is a clock-and-timing semiconductor that generates, divides, multiplies, and phases a reference clock to produce one or more stable output frequencies. The quad-PLL architecture expands this role into a multi-output clock-generation hub. In system terms, the ICS308RI belongs to the PLL synthesizer family, clock-generation ICs, clock-and-timing ICs, and the broader integrated-circuit and semiconductor hierarchy. The principal feature is simultaneous generation of up to six output frequencies across a 250 kHz to 200 MHz range. Serial programmability allows system designers to configure divider ratios and output relationships instead of relying on a fixed-frequency oscillator. This makes the ICS308RI useful when several clock domains require independent or related rates while sharing one reference source. Its four internal PLL channels provide more configuration flexibility than a basic single-output clock generator. The ICS308RI is specified as a clock/frequency synthesizer IC with a maximum frequency of 200 MHz. The manufacturer documentation identifies the device as a serial-programmable quad-PLL VersaClock synthesizer, which describes both its programming interface and its four-PLL architecture. Its 20-pin SSOP package supports surface-mount PCB assembly and preserves a relatively compact board footprint for multi-clock systems. Typical applications include communications equipment, networking infrastructure, industrial control systems, data-conversion equipment, and embedded systems that need several internally related clock outputs. A single reference clock can be multiplied and divided to support multiple converters, processors, or interface blocks. The ability to produce six frequencies simultaneously can simplify clock-tree design and reduce the number of separate synthesis devices required on a board. When integrating the ICS308RI, verify the reference-clock range, supply requirements, programming interface, output-drive characteristics, and output-frequency limits against the manufacturer datasheet before finalizing the PCB. Preserve short, controlled traces around the clock inputs and outputs, provide the required bypass capacitors, and account for output jitter when routing sensitive clock signals. This page organizes the ICS308RI core specifications, application guidance, pin-package information, and drop-in replacement information into a design-focused resource for engineers evaluating programmable clock-generation architectures.

RFQ Kontak
ICS308RT - 200MHz Quad PLL Clock Synthesizer | Renesas
ICS308RT

ICS308RT - 200MHz Quad PLL Clock Synthesizer | Renesas

Renesas Electronics ICS308RT is a serial-programmable quad-PLL VersaClock synthesizer capable of generating output frequencies from 250 kHz to 200 MHz and providing six different output frequencies simultaneously. The device combines four phase-locked loops with a serial programming interface, allowing a host controller to configure multiple clock outputs for a complex electronic system. It is positioned as a clock and timing IC within the broader clock-generator, frequency-synthesizer, PLL, and semiconductor hierarchy. A phase-locked loop, or PLL, is a feedback-controlled clock-generation circuit that compares an output signal with a reference and adjusts a controlled oscillator until the phase and frequency relationship is maintained. A multi-PLL clock synthesizer extends this principle by deriving several related or independent clock outputs from one programmed device. The ICS308RT therefore serves as a central timing component for systems requiring more clock domains than a single-output oscillator can economically provide. The principal feature of the ICS308RT is its six simultaneous outputs, each of which can be assigned a different frequency within the stated 250 kHz to 200 MHz operating range. This output count allows one synthesizer to support multiple domains such as processor clocks, communication interfaces, memory timing, converters, or signal-processing chains. Serial programmability also simplifies configuration by allowing the system controller to set the clock plan instead of relying on a large collection of discrete oscillators. The quad-PLL architecture provides the timing foundation for six independently usable output frequencies, while the wide 200 MHz upper limit accommodates high-speed digital, communications, and control systems. Its 250 kHz lower range supports low-frequency timing and divided-clock requirements. Because all outputs are derived from one programmable package, the synthesizer can simplify clock-tree organization compared with multiple discrete crystal oscillators and dividers. Typical applications include FPGA and processor clock trees, industrial control systems, communications equipment, audio and video processing, instrumentation, and multi-clock test systems. It is particularly useful when several buses or subsystems require synchronized clocks with different output rates. The six-output architecture can reduce component count and centralize clock configuration, although the final design must account for output jitter, reference quality, supply requirements, and channel-specific frequency limits. When laying out a circuit using the ICS308RT, begin with the manufacturer pin-description and layout guidance in the datasheet. Preserve short, controlled-length clock routes, provide the required reference and decoupling connections, and validate every output frequency against the relevant PLL and output limits. Configuration should be tested with the intended reference clock because programming values, loop behavior, and board-level clock integrity determine the final frequency accuracy and phase-noise performance. This page combines the device architecture, frequency capability, application guidance, package considerations, and verified cross-reference information in a form that supports component selection and engineering review. It also distinguishes documented operating facts from parameters that require confirmation from the full manufacturer datasheet before a production layout or replacement is approved.

RFQ Kontak
ICS309R - 200MHz Triple-PLL Clock Synthesizer | Renesas
ICS309R

ICS309R - 200MHz Triple-PLL Clock Synthesizer | Renesas

The Renesas Electronics ICS309R is a serially programmable triple-PLL spread-spectrum VersaClock synthesizer with a maximum output frequency of 200 MHz, supplied in a 20-pin SSOP package. Its verified electrical attributes include LVCMOS outputs, clock or crystal inputs, PLL bypass capability, a 1:9 input-to-output ratio, and a 3.0 V to 3.6 V supply range. A clock synthesizer generates or distributes one or more related clock signals for digital systems. This ICS309R belongs to the PLL-based clock generator hierarchy: it compares a reference clock with an internal phase-locked loop and then divides or multiplies that reference to produce programmable outputs. Spread-spectrum clocking reduces the concentration of clock energy at one frequency, while serial programming permits controlled configuration by an embedded controller. The strongest verified features of ICS309R are its triple-PLL architecture, serial programmability, spread-spectrum operation, 200 MHz maximum frequency, LVCMOS output type, and support for both clock and crystal reference sources. The bypass function can be useful when a system must pass through or test a clock source without normal PLL operation. The 20-pin surface-mount SSOP supports compact clock-generation layouts. The supplied snippets do not disclose the complete PLL configuration ranges, individual output-channel assignments, jitter specifications, serial interface levels, or output-drive details. Engineers should therefore treat ICS309R as a 200 MHz-class, 3.3 V clock synthesizer and verify every timing and signal-integrity requirement against the manufacturer datasheet before releasing a new design. Some retrieved summaries appear to mix ICS309R with the closely related ICS308, so this distinction is important. Typical uses include processor and controller clock generation, communications equipment, storage systems, test and measurement instruments, and embedded systems that require programmable frequency generation or spread-spectrum clocking. In each case, the reference clock, target output frequency, loop filter, serial programming sequence, and downstream load must be validated together. PCB implementation should preserve short, controlled-impedance clock paths and provide clean return paths beneath the device. Keep programming signals away from sensitive clock nets, observe all bypass-capacitor recommendations in the datasheet, and confirm output rise and fall times at the actual receiver. Do not infer pin function or output assignment from the family-level product description alone. This page consolidates the verified distributor and datasheet-index information available for ICS309R, separates confirmed facts from missing data, and provides replacement, selection, and design guidance that is not presented as a manufacturer datasheet replacement.

RFQ Kontak
ICS309RI - 200 MHz Triple-PLL Spread-Spectrum Clock | Renesas
ICS309RI

ICS309RI - 200 MHz Triple-PLL Spread-Spectrum Clock | Renesas

The Renesas ICS309RI is a serial-programmable triple-PLL spread-spectrum clock synthesizer with a maximum operating frequency of 200 MHz, LVCMOS outputs, and clock or crystal input support. It is packaged in a QSOP-20 package and is designed for systems that require programmable frequency generation, clock distribution, and spread-spectrum clocking. The ICS309RI includes PLL bypass functionality and supports input-to-output multiplication ratios described in the device documentation. A programmable clock synthesizer is used to generate one or more stable digital clock outputs from a reference clock or crystal. By dividing or multiplying the reference frequency through internal phase-locked loops, the circuit allows system designers to reconcile multiple clock domains and reduce clock-related electromagnetic interference. Spread-spectrum operation further changes the emitted clock frequency over time, reducing narrowband emissions and improving compatibility with sensitive downstream equipment. The ICS309RI uses serial programming to configure its clock-generation functions, allowing a host controller to set operating parameters during initialization. The presence of LVCMOS outputs makes it suitable for digital logic requiring conventional single-ended clock signaling. Its maximum frequency of 200 MHz provides ample headroom for communications, networking, storage, embedded computing, and industrial control systems that distribute clocks to processors, transceivers, and peripheral controllers. The triple-PLL architecture is useful when one reference source must support several related output frequencies. PLL bypass allows the device to pass through a clock when a direct path is appropriate, helping designers simplify control sequences and support different operating modes. The QSOP-20 package supports compact surface-mount construction while providing the pin count needed for programming, reference, and clock outputs. When designing around the ICS309RI, begin with the manufacturer pin-description and application-information sections to assign programming pins, reference inputs, and outputs correctly. Confirm the selected reference frequency, output ratio, output enable sequence, and bypass state in software before enabling downstream clocks. Keep clock traces short, provide continuous return paths, and account for output-enable timing when multiple loads must start in a defined sequence. This product page combines the device’s documented architectural features with practical guidance for clock-tree integration, programming, and EMI-conscious implementation. It is intended to help engineers distinguish the ICS309RI from ordinary fixed-frequency clock generators and to evaluate whether its programmable triple-PLL architecture matches the requirements of a new board design.

RFQ Kontak
ICS309RT - 200MHz Triple-PLL Clock Synthesizer | Renesas
ICS309RT

ICS309RT - 200MHz Triple-PLL Clock Synthesizer | Renesas

Renesas Electronics ICS309RT is a serially programmable triple-PLL spread-spectrum clock synthesizer with a maximum output frequency of 200 MHz, supplied in a 20-pin SSOP surface-mount package. The device accepts a clock or crystal input, provides LVCMOS outputs, supports PLL bypass, and can produce up to six different output frequencies simultaneously. Its specified operating supply range is 3 V to 3.6 V. A clock synthesizer is an integrated timing device that generates or distributes multiple related clock frequencies from a common reference. It belongs to the clock and timing IC hierarchy, where PLLs multiply and divide a reference frequency to establish programmable output clocks. The ICS309 combines that function with serial programming and spread-spectrum clock generation, allowing system designers to control frequency relationships and reduce clock-related electromagnetic interference without redesigning the PCB. The principal feature of ICS309RT is its triple-PLL architecture. According to the manufacturer device description, ICS309RT can generate any output frequency from 250 kHz to 200 MHz and supports up to six simultaneous output frequencies. This range permits one timing device to replace multiple separate oscillators or dividers in communications, storage, computing, and test systems. Serial programmability also simplifies configuration and supports applications where several clocks must be coordinated under software control. The ICS309RT supports both clock and crystal inputs. This allows it to operate from an externally generated reference or from a crystal oscillator arrangement when an independent frequency reference is required. Its PLL bypass feature provides a path for evaluating clock behavior without modulation, while its spread-spectrum capability is intended to spread clock energy across a frequency band and reduce peak electromagnetic emissions. LVCMOS output signaling is suitable for common digital clocking environments operating from the device's 3 V to 3.6 V supply range. Typical uses include processor and peripheral clock distribution, data-conversion clocking, communications equipment, storage controllers, networking hardware, and embedded systems that require several frequency outputs. The six-output capability is especially useful when a design needs related clocks for a controller, serial interface, memory, and data converter without allocating a separate oscillator to each load. The primary design consideration is configuration and output planning. Engineers should use the manufacturer datasheet's pin-description, register, and application tables to confirm every pin function, programming sequence, output format, and reference-clock requirement before layout. Because the clock-generation architecture includes PLL and spread-spectrum functions, signal routing, grounding, and output loading should follow the manufacturer's recommended reference layout rather than relying on general-purpose clocking assumptions. This product page consolidates the verified frequency, PLL, I/O, supply, and package characteristics into an engineering-focused reference. It also distinguishes verified device functions from parameters that still require confirmation from the complete manufacturer datasheet, helping designers plan replacements and PCB reuse without assuming unsupported compatibility.

RFQ Kontak
ICS341MP - 200MHz Spread Spectrum Clock Synth | Renesas
ICS341MP

ICS341MP - 200MHz Spread Spectrum Clock Synth | Renesas

The Renesas Electronics ICS341MP is a low-cost, single-output, field-programmable clock synthesizer with a maximum output frequency of 200 MHz and an LVCMOS output in an 8-pin SOIC package. It accepts a clock or crystal input, contains one PLL, and supports programmable output frequencies from 250 kHz to 200 MHz at a 1:1 input-to-output ratio. A field-programmable clock synthesizer is a clock-and-timing IC that generates a stable digital clock from an external reference. The ICS341 belongs to the broader PLL-based frequency synthesizer hierarchy, where the PLL multiplies or divides a reference frequency to create a programmable operating clock. Clock-and-timing ICs support digital systems requiring deterministic frequency generation, clock distribution, or reduced electromagnetic interference. The ICS341MP supports spread-spectrum clock generation to reduce system EMI by distributing clock energy over a range of frequencies. Its maximum frequency is 200 MHz, while its minimum programmable output is 250 kHz. A single LVCMOS output simplifies clock routing, and the integrated PLL allows the device to operate from a clock or crystal reference. These characteristics suit designs that need adjustable timing without a complex multi-output clock architecture. The ICS341MP is implemented in an 8-SOIC surface-mount package measuring 3.90 mm in body width. This package provides a practical upgrade over larger through-hole clock devices while remaining compatible with conventional PCB assembly. Its single-circuit architecture also keeps the signal path manageable, although applications requiring multiple independently programmable outputs would need a more capable clock generator. Typical uses include EMI-sensitive embedded systems, communications equipment, consumer electronics, and digital processing platforms where a programmable reference is useful. Spread-spectrum operation can help reduce narrowband emissions in systems that must meet internal or regulatory EMC goals. The 200 MHz ceiling supports common processor, interface, and control-clock requirements, while the 250 kHz lower limit accommodates lower-rate digital buses and control logic. Designers should verify the reference-input configuration, programmed frequency range, output enable behavior, and external crystal or clock requirements against the manufacturer datasheet before layout. Keep the reference and output paths short, provide the required decoupling capacitors close to the device, and confirm that the selected spread-spectrum range satisfies both timing margins and system EMC objectives. This page organizes the ICS341MP specifications, sourcing information, design guidance, and qualified drop-in options into one engineering-focused reference. It supports faster part selection while emphasizing the need to validate programming, reference, and EMC details against the manufacturer datasheet.

RFQ Kontak
ICS342MP - 200MHz Dual-Output Clock Synthesizer | Renesas
ICS342MP

ICS342MP - 200MHz Dual-Output Clock Synthesizer | Renesas

Renesas Electronics ICS342MP is a field-programmable, dual-output clock synthesizer with a maximum output frequency of 200 MHz, packaged in an 8-pin SOIC. The device accepts clock or crystal input and provides LVCMOS clock outputs through an integrated PLL architecture. Its specified 3.15 V to 3.45 V operating-supply range makes it suitable for low-voltage digital systems requiring locally generated, configurable timing signals. A clock synthesizer is a clock and timing IC that generates, divides, multiplies, or redistributes clock signals for digital logic. Clock generators and PLL-based synthesizers belong to the broader timing-control hierarchy that includes oscillators, clock buffers, dividers, and jitter-cleaning devices. Unlike a crystal oscillator, which primarily produces a fixed reference frequency, the ICS342MP uses programmable synthesis to produce multiple related output clocks and reduce the number of separate timing components in a system. The ICS342MP combines two configurable outputs with PLL support and a maximum frequency of 200 MHz. Its input section can operate from a clock or crystal, while its LVCMOS outputs are suited to digital logic that requires single-ended clock signals. The SOIC-8 surface-mount package also supports conventional PCB assembly and provides a compact option for communication, control, and embedded-system clock trees. Programmability allows the output frequencies to be selected through the device configuration interface instead of requiring a separate fixed-frequency oscillator for each clock domain. This can simplify board partitioning and provide a common timing reference for related circuits. The PLL architecture is useful when the system needs an output frequency derived from a common reference, although loop behavior, output jitter, and reference stability must be evaluated during clock-tree design. Typical uses include digital controller timing, industrial automation modules, embedded processor clock distribution, communications equipment, and general-purpose peripheral clocking. In these systems, two outputs can support related clock domains or distribute a master clock to two loads while keeping the design compact. The low-voltage supply requirement should be checked against the voltage and sequencing requirements of the logic being clocked. The main design consideration is preserving signal integrity between the synthesizer outputs and receiving logic. Keep clock traces short, provide a continuous ground reference, use appropriate termination when required, and observe the input and output timing limits in the manufacturer datasheet. Decoupling should be placed close to the supply pin, with the value and stability requirements taken directly from the recommended application circuit. This page consolidates the ICS342MP device identity, clock-synthesis specifications, package information, sourcing structure, and application-oriented design guidance. It also identifies the verified same-family replacement candidate and separates confirmed electrical attributes from parameters that require confirmation before schematic release or production qualification.

RFQ Kontak
ICS343MP - 200MHz Triple-Output Clock Synthesizer | Renesas
ICS343MP

ICS343MP - 200MHz Triple-Output Clock Synthesizer | Renesas

Renesas Electronics ICS343MP is a field-programmable, triple-output clock synthesizer based on the VersaClock architecture. It generates three independently programmable output clocks, reaches a maximum output frequency of 200 MHz, and accepts either a crystal or external clock input. The device is packaged in an 8-pin SOIC measuring 3.90 mm wide, making it suitable for compact communications, industrial control, test-and-measurement, and embedded timing systems. A clock synthesizer is a timing IC that accepts a reference frequency and uses one or more phase-locked loops to produce stable, independently configurable clock outputs. The ICS343 belongs to the clock generator and PLL hierarchy within the broader clock and timing IC category. Its three-output architecture can replace multiple discrete oscillators or divider networks when a board requires several related frequencies from one reference source. The ICS343MP provides three programmable outputs, PLL-based frequency synthesis, LVCMOS output signaling, and maximum frequency operation of 200 MHz. Separate output divide values from 2 through 20 allow the output clock banks to support widely different frequencies from the same reference. These features make the device useful where a system needs flexible clock partitioning without allocating a separate synthesizer for every rail. Its architecture supports low-cost field-programmable clock generation from a crystal or clock source. Independent output programming is particularly valuable in mixed-signal, communications, and data-conversion systems where the processor, serial interface, and peripheral blocks may not require the same frequency. The 8-SOIC package also offers a familiar surface-mount footprint for designs that must support external oscillators or frequency dividers. Typical applications include processor and interface clocking, communications modules, industrial automation equipment, test and measurement instrumentation, and embedded control systems. In each case, the synthesizer can centralize reference distribution while allowing output frequencies and divide ratios to be selected during configuration. The result is a smaller clock tree and potentially fewer discrete timing components. Designers should evaluate loop bandwidth, output jitter, supply requirements, and board-level noise using the manufacturer's application guidance before high-volume release. Reference-crystal layout, grounding, and output-routing practices are especially important in low-jitter systems. Because output-edge quality depends on the complete clock tree, PCB trace geometry and supply decoupling should be evaluated together with the programmed divider and PLL settings. This product page consolidates the device classification, functional characteristics, sourcing information, and engineering-oriented usage guidance. It also distinguishes the verified ICS343MP configuration from related suffix variants and identifies the limitations of the available replacement records, helping engineers make a more informed drop-in decision without treating broadly similar clock ICs as electrically interchangeable.

RFQ Kontak