Mga Interface IC
Subkategorya
Mga Produkto (2,600+)
ISO7762DBQR - 6-Ch 100Mbps Digital Isolator | TI
The ISO7762DBQR is a reinforced six-channel digital isolator from Texas Instruments, designed for robust signal isolation in industrial and automotive applications. It provides 3000-VRMS isolation rating per UL 1577, with a data rate of 100 Mbps and a typical common-mode transient immunity (CMTI) of ±100 kV/µs. The device operates from a wide supply range of 2.25 V to 5.5 V, making it versatile for various logic levels. It is housed in a 16-pin SSOP (DBQ) package, measuring 0.154" width, and is rated for operation from -55°C to 125°C. Digital isolators are components that transmit digital signals across an isolation barrier, providing galvanic isolation to protect circuits and users from high voltages, ground loops, and noise. They are essential in systems where safety and signal integrity are critical, such as in motor drives, power converters, and medical equipment. The ISO7762DBQR belongs to the ISO776x family, which includes variants with different channel configurations and isolation ratings, all certified to VDE, CSA, TUV, and CQC standards. Key features of the ISO7762DBQR include its reinforced isolation barrier with a projected lifetime of over 30 years, surge capability up to 12.8 kV, and low power consumption. The device supports CMOS or LVCMOS digital I/Os and offers high electromagnetic immunity and low emissions, ensuring reliable operation in noisy environments. The 4/2 channel configuration (four forward, two reverse) is ideal for applications requiring bidirectional communication. Technically, the ISO7762DBQR uses TI's proprietary capacitive isolation technology, which provides fast propagation delays and low jitter. The device features an enable pin for output control and a fail-safe mode that defaults outputs to a known state when inputs are unpowered. The wide supply range allows seamless interfacing with 2.5V, 3.3V, and 5V logic, simplifying system design. Typical applications include industrial fieldbus communication, isolated SPI/UART interfaces, motor control feedback, and isolated power supply monitoring. The high CMTI and robust isolation make it suitable for harsh environments where voltage transients are common. When designing with the ISO7762DBQR, ensure proper PCB layout with adequate creepage and clearance distances to maintain the isolation rating. Place decoupling capacitors close to the VCC pins and follow the recommended layout guidelines in the datasheet to achieve optimal performance.
ISO7762FDBQR - 6-Ch 100Mbps Reinforced Digital Isolator | TI
The Texas Instruments ISO7762FDBQR is a high-performance reinforced 6-channel digital isolator with 4 forward / 2 reverse channel direction, supporting 3 kVRMS bandwidth isolation (UL 1577) in a 16-pin SSOP (DBQ) package. The device provides up to 100 Mbps data rate and 85 kV/µs common-mode transient immunity (CMTI). It operates from 3.5 V to 5.5 V on both sides, supporting standard logic level translation across the isolation barrier. A digital isolator is a semiconductor device that transfers digital signals across a galvanic isolation barrier using high-voltage internal capacitive or magnetic isolation. Digital isolators replace legacy optocouplers in industrial, automotive, and medical systems because they offer higher speed, tighter channel-to-channel matching, lower power consumption, better CMTI, and longer operational life. They belong to the broader category of signal conditioning ICs within interface ICs. Key features of the ISO7762FDBQR include robust EMC performance per IEC 61000-4-x, reinforced insulation rating per VDE 0884-11, default output low (F option) for fail-safe behavior, and low propagation delay of 12 ns typical at 5 V. The device integrates an on-chip transformer driver and CMOS logic on both isolation domains, achieving >25-year projected isolation barrier life at the rated working voltage. The architecture uses TI's proprietary silicon-dioxide (SiO2) capacitive isolation barrier combined with edge-controlled pulse generation for high CMTI and minimal pulse-width distortion. All channels share a common supply topology and operate independently, supporting SPI, I2C (with external level shifter), UART, RS-485, RS-232, GPIO, and digital sensor interfaces across the barrier. Typical applications include isolated SPI interfaces for solar inverters, isolated RS-485/RS-232 transceivers in factory automation, isolated gate drivers for motor control, isolated ADC/DAC signal chains in medical imaging equipment, and isolated digital IO for EV battery management systems. When designing with this part, ensure that the high-side and low-side supplies are independently decoupled with 0.1 µF + 1 µF ceramic capacitors placed as close as possible to the VCC1 and VCC2 pins. The DBQ package provides 3000 Vrms isolation; choose the DW package variant for 5000 Vrms reinforced isolation at the same pinout. This page synthesizes distributor pricing, drop-in same-brand alternatives (ISO7762DBQR, ISO7762FDBQ, ISO7762FDBQT), and cross-brand alternatives from the Site MPN list (ISO7742DBQR, ISO7741DBQR, ISO7041FDBQR) along with practical design notes not found in the manufacturer datasheet.
ISO7762FDWR - 6-Ch Reinforced Digital Isolator, 5kVrms, 100Mbps | TI
The Texas Instruments ISO7762FDWR is a reinforced six-channel digital isolator in a 16-pin SOIC (DW) wide-body package, rated at 5000 Vrms isolation with 100 Mbps signaling speed and 85 kV/us common-mode transient immunity (CMTI). The device provides four forward and two reverse channels (4/2 directionality) and operates from 2.25 V to 5.5 V on both sides, enabling level translation between mixed-voltage nodes in industrial systems. A digital isolator is a semiconductor device that transfers logic signals across an galvanically-isolated barrier using an on-chip transformer or high-voltage capacitor coupling, replacing optocouplers with higher speed, lower power, tighter channel-to-channel matching, and longer operational life. ISO7762FDWR belongs to the digital isolator -> signal isolator -> isolation IC -> interface IC hierarchy, and within TI's portfolio is part of the ISO77xx reinforced-isolation family that targets IEC 60747-17 basic and reinforced insulation systems. Key specifications include a maximum data rate of 100 Mbps (NRZ), propagation delay of 11 ns typical with 2.5 ns channel-to-channel skew, 1.5 pF typical low input capacitance, and a default output low state when input power is removed. The wide-body SOIC package provides 8 mm of creepage/clearance, supporting 5000 Vrms isolation per UL 1577, IEC 60747-17 reinforced VGB, and reinforced insulation ratings required for industrial motor drives, solar inverters, and medical equipment. The architecture uses TI's silicon-oxide (SiO2) capacitive isolation barrier with an integrated OOK-modulated carrier, providing robust CMTI immunity and very low EMI emissions. The device operates from a single 2.25 V to 5.5 V supply on each side and supports level translation without external components. Internal under-voltage lockout (UVLO) on both supply rails prevents indeterminate outputs during power-up/power-down transients, a critical requirement for functional-safety systems. Typical uses are isolated SPI/UART interfaces between microcontrollers and gate drivers, isolated gate-drive signals for IGBT/MOSFET power stages in motor drives and solar inverters, isolated analog front-end to ADC links in factory-automation controllers, and reinforced isolation in medical patient-monitoring equipment per IEC 60601-1. The DW wide-body SOIC package ensures the 8 mm creepage required for reinforced insulation at 250 V working voltage or higher. When designing with ISO7762FDWR, place 0.1µF + 10µF decoupling capacitors close to each VCC pin, route the input and output channels in separated PCB regions to maximize creepage, and pair the device with isolated gate drivers such as TI ISO5451/ISO5851 for IGBT/PW/SiC power stages. For CAN/RS-isolated nodes, consider ISO7762 plus an external CAN transceiver like TCAN334 or TCAN337 for a complete isolated bus segment. This page synthesizes distributor pricing, drop-in alternatives within the same 16-SOIC (DW) package, and practical design notes not found in the manufacturer datasheet.
ISO7762FQDBQRQ1 - 6-Ch Reinforced Digital Isolator | Texas Instruments
The Texas Instruments ISO7762FQDBQRQ1 is an automotive-grade (AEC-Q100 qualified), reinforced 6-channel digital isolator in a 16-pin SSOP (DBQ) package with 4 forward and 2 reverse-direction channels, supporting data rates up to 100 Mbps and a common-mode transient immunity (CMTI) of 85 kV/µs. The device provides 3000 Vrms isolation per UL 1577 and additional certification to VDE, CSA, TUV, and CQC standards, plus reinforced insulation suitable for 5 kV systems when used with the DW package option in the same family. The Q1 suffix indicates the part is automotive qualified, and the F grade denotes the high-speed (100 Mbps) data rate tier of the ISO776x-Q1 family. A digital isolator is a semiconductor device that transfers data across a galvanically isolated barrier using capacitive or magnetic coupling rather than optical or transformer means, enabling robust signal isolation between high-voltage and low-voltage domains in mixed-voltage systems. The ISO776x family implements TI's silicon-dioxide (SiO2) capacitive isolation technology, which delivers high electromagnetic immunity, low emissions, and long-term reliability with stable dielectric aging characteristics. Digital isolators sit in the signal-conditioning hierarchy: sensor/MCU -> digital isolator -> isolated gate driver / communication PHY -> power module or HVDC link. Key features include wide 2.25 V to 5.5 V supply range on both sides, low 1.7 mA per-channel quiescent current at 1 Mbps, ±100 kV/µs CMTI typical, low propagation delay (typically 11 ns), low pulse-width distortion (<4.5 ns), and default-high or default-low output options via part-number suffix. The 16-pin DBQ SSOP package offers a compact 3.90 mm body width while maintaining the 8 mm creepage required for reinforced 3000 Vrms isolation per UL 1577. Typical applications include isolated SPI/UART communication between a microcontroller and a high-voltage gate driver in traction inverters, isolated data acquisition links in battery management systems, isolated RS-485 or CAN transceivers in automotive body controllers, and isolation for industrial 24 V PLC interfaces. The reinforced insulation rating supports functional-safety isolation barriers up to 5 kV in motor-drive and solar inverter systems. When designing with this part, place 0.1 µF bypass capacitors on both VCC1 and VCC2 pins within 2 mm of the device, and avoid routing high dv/dt signals directly beneath the isolator to maintain CMTI margin. The reinforced-insulation barrier requires a minimum 8 mm of PCB creepage under the device body; do not place any copper traces, vias, or solder mask openings within the barrier region. This page combines distributor pricing, drop-in package alternatives from the same TI ISO77xx-Q1 family and the broader reinforced isolator market, and practical EMC/PCB design notes not collected in the manufacturer datasheet alone, helping engineers compare this Q1 automotive-grade option against the standard ISO7762 (non-Q1) for non-automotive designs.
ISO7762QDWQ1 - 6-Ch 100Mbps Reinforced Digital Isolator | TI
The Texas Instruments ISO7762QDWQ1 is an automotive-grade, reinforced six-channel digital isolator with 4 forward and 2 reverse channels, providing 5000 Vrms isolation and 100 Mbps data signaling rate in a 16-pin SOIC (DWQ) wide-body package. The device integrates TI's silicon-oxide (SiO2) capacitive isolation barrier with high CMTI of 85 kV/us typical, robust EMC, and a wide 2.25 V to 5.5 V supply range for direct interfacing to low-voltage controllers and isolated power rails. ISO7762QDWQ1 is qualified to AEC-Q100 for automotive applications and supports operating temperatures from -40 C to +125 C. A digital isolator is a semiconductor device that transfers logic signals between circuits while maintaining galvanic isolation, typically thousands of protection classes by using capacitive, inductive, or optical coupling across an internal dielectric. The ISO7762 product family belongs to the broader category of integrated isolators, interface ICs within the power management / isolation product taxonomy, line sensing and communication between high-voltage and low-voltage domains. In a multi-rail system, the isolator sits between a high-voltage gate driver or motor control stage and a low-voltage MCU/ASIC, breaking ground loops and protecting the low-voltage side from high-voltage transients, surges, and fault events. Compared to optocouplers, modern CMOS digital isolators offer faster data rates, lower propagation delay, lower power, better CMTI, and superior temperature and lifetime stability. Key differentiating features of the ISO7762QDWQ1 include 100 Mbps signaling across all six channels with typical propagation delay of 11 ns (5 ns max skew), wide-input voltage tolerance of 2.25 V to 5.5 V on each side for cross-domain level translation, reinforced 5000 Vrms per UL 1577-1, and integrated robust EMC certification that simplifies system-level ESD/EFT/surge compliance testing. The device supports default low or high output on power loss via enable pin control, and is available in 16-pin SOIC wide-body and SSOP packages. Per TI datasheet, the supply current is typically 14 mA at 100 Mbps with 5 V supplies on both sides, and the device meets VDE 0884-11 basic and reinforced insulation. The ISO7762QDWQ1 is most commonly used in industrial automation, factory automation, and process-control networks, hybrid and electric vehicle (HEV/EV) powertrain, charging station, and battery management systems (BMS), solar inverter and photovoltaic (PV) island, telecom data center power conversion and digital control interfaces, isolated SPI/UART/CAN/JTAG links, motor-control gate-drive isolation, and high-voltage medical instrumentation requiring 5000 Vrms reinforcement. The combination of 100 Mbps speed and 85 kV/us CMTI makes it ideal for driving SiC and IGBT gate drivers where high dv/dt transitions are routine. When designing with the ISO7762QDWQ1, place 0.1 uF and 10 uF VCC bypass capacitors close to each supply pin, and verify that the VDE 0884-11 creepage/clearance and PCB layout rules meet your safety isolation rating. The default output state on power loss is determined by the EN pin setting; plan enable sequencing accordingly to avoid undefined logic during multi-rail power-up.
ISO7763DWR - 6-Channel 100Mbps Reinforced Digital Isolator | TI
The Texas Instruments ISO7763DWR is a reinforced six-channel digital isolator with a 3/3 forward-channel configuration, 100 Mbps maximum data rate, 85 kV/us CMTI, and 5000 Vrms reinforced isolation in a 16-SOIC DW package. It is designed for high-speed communication between systems operating at different ground potentials, helping protect low-voltage electronics from high-voltage transients. A digital isolator is a semiconductor interface that transfers data across an electrically isolated barrier while minimizing conductive and capacitive coupling between its input and output sides. The ISO7763 belongs to the interface-IC hierarchy and uses capacitive isolation to support signal transmission up to 100 Mbps. Its reinforced isolation rating is intended for applications requiring stronger galvanic separation than basic isolation circuits. The ISO7763DWR provides six digital channels in a 3/3 arrangement, allowing three signals to travel in one direction and three in the opposite direction. Its 5000 Vrms DW-package isolation rating, 85 kV/us common-mode transient immunity, and reinforced construction make it suitable for industrial control, power conversion, communications, and test equipment. The device is specified from -55°C to +125°C according to the manufacturer product details. The principal design considerations are correct supply bypassing, respect for the isolation barrier, propagation-delay behavior, and the package creepage and clearance requirements. The 16-SOIC package is compatible with surface-mount assembly, while the exact pin functions and channel direction must be confirmed from the official datasheet before PCB routing. The default output state of ISO7763DWR is HIGH, which should be considered during power-up and fail-safe system design. Typical applications include isolated SPI or control links in power converters, communication interfaces in industrial equipment, protection between high-side and low-side circuitry, and digital signal isolation between systems with different ground references. Because isolation does not remove the need for careful layout, external protection, and common-mode analysis, the ISO7763DWR should be selected based on voltage, speed, timing, and EMC requirements rather than package appearance alone. This page consolidates the verified ISO7763DWR specifications, package information, sourcing links, and practical selection guidance. It is intended to help engineers identify whether the ISO7763DWR is appropriate for a particular isolated-interface design.
ISO7763FDWR - 6-Channel Digital Isolator, 5kVrms, 100Mbps | TI
The Texas Instruments ISO7763FDWR is a reinforced six-channel digital isolator with 3 forward / 3 reverse (3/3) channel directionality, 5000 Vrms isolation rating (DW package), 100 Mbps data rate, and 85 kV/us typical common-mode transient immunity (CMTI), housed in a 16-pin wide-body SOIC (DW) package. The device uses TI's silicon dioxide (SiO2) capacitive isolation barrier technology and is UL 1577, VDE V 0884-11, CSA, and CQC certified for reinforced insulation. The 'F' suffix denotes the default-high output option while the 'DWR' suffix indicates the 16-pin DW wide-body SOIC tape-and-reel packaging. A digital isolator is a semiconductor device that transfers logic signals between two voltage domains while providing galvanic isolation (no direct current path) up to several kVrms. Digital isolators sit in the signal-chain hierarchy between the sensor/MCU domain and the field-side high-voltage domain, replacing optocouplers with faster edge rates, lower propagation delay, lower dynamic power consumption, and longer operational life. Within the broader taxonomy, ISO7763FDWR is a digital isolator > reinforced isolator > capacitive-isolation isolator > UL 1577 / VDE 0884-11 compliant device > interface IC. Key features include 100 Mbps signaling across all six channels (NRZ), typical propagation delay of 11 ns (5 ns max skew between channels), 1.5 ns pulse-width distortion, and a wide 2.25 V to 5.5 V supply range on each side with level-shifting capability between mismatched rails. The 85 kV/us CMTI prevents data corruption in noisy motor-drive and switching-converter environments, and the 5000 Vrms rating per UL 1577 plus 800 Vpeak working voltage per VDE 0884-11 enable use in 230 V / 400 V industrial systems. An integrated refresh circuit keeps output state stable during missing input edges. Typical applications include isolated SPI / UART / GPIO interfaces in PLCs, isolated gate-drive signal paths for IGBT/MOSFET half-bridges, isolated data acquisition between ADC and MCU, industrial fieldbus (RS-485, CAN, Modbus) isolation, and solar / EV traction inverter gate drivers. The wide-body SOIC provides the creepage and clearance required by end-product safety standards such as IEC 61800-5-1 (adjustable-speed drives) and IEC 61010-1 (measurement equipment). When designing with the ISO7763FDWR, place 0.1 uF decoupling capacitors close to both VCC1 and VCC2 pins, and route the two ground returns (GND1, GND2) as separate planes connected only at the isolator. Avoid placing the device near switching-node edges that exceed its 85 kV/us CMTI margin. This page synthesizes distributor stock, parametric drop-in alternatives, and EMC layout notes not found in the manufacturer datasheet alone, giving the design engineer a single decision-grade reference.
ISO7842FDWW - Reinforced 4-Ch Digital Isolator | TI
The Texas Instruments ISO7842FDWW is a high-performance, reinforced quad-channel digital isolator with a 2/2 channel configuration (two forward, two reverse), designed for robust signal isolation in industrial and automotive systems. It provides 8000-VPK isolation voltage and 5700-Vrms isolation rating, with a wide supply range of 2.25V to 5.5V on both sides, enabling seamless level translation. The device supports signaling rates up to 100 Mbps with a typical propagation delay of 11 ns and a common-mode transient immunity (CMTI) of 100 kV/µs, ensuring reliable data transfer in noisy environments. Housed in a 16-pin SOIC extra-wide body (DWW) package with 14.5 mm creepage, it operates over a wide temperature range of -55°C to +125°C, making it suitable for harsh applications. A digital isolator is a component that provides electrical isolation between two circuits while allowing digital signals to pass across the isolation barrier. It uses capacitive or magnetic coupling to transfer data without a direct electrical connection, protecting sensitive electronics from high voltages, ground loops, and noise. Digital isolators are essential in systems where safety and signal integrity are critical, such as in motor drives, power converters, and medical devices. They replace optocouplers in many applications due to their higher speed, lower power consumption, and better reliability. Key features of the ISO7842FDWW include its reinforced isolation certifications per VDE, CSA, CQC, and TUV, ensuring compliance with international safety standards. The device offers low power consumption, typically 1.7 mA per channel at 1 Mbps, and supports a wide supply range, making it versatile for various voltage domains. Its high CMTI of 100 kV/µs ensures robust operation in environments with fast voltage transients, such as motor drives and inverters. The 2/2 channel configuration provides flexibility for bidirectional communication, and the device is available in both SOIC wide-body (DW) and extra-wide body (DWW) packages. Technically, the ISO7842FDWW uses a capacitive isolation barrier with an on-off keying (OOK) modulation scheme, which provides high-speed data transfer with low propagation delay and skew. The device features an enable pin for output control and a fail-safe mode that defaults to a known state when the input is unpowered. The wide supply range and level translation capability allow direct interfacing with different logic levels, simplifying system design. The device is designed to meet reinforced isolation requirements, providing double protection for safety-critical applications. Typical applications include industrial fieldbus communication, motor drives, power inverters, and isolated SPI/UART interfaces. The ISO7842FDWW is also used in medical equipment, test and measurement instruments, and renewable energy systems where galvanic isolation is required. Its high-speed capability and robust isolation make it ideal for applications demanding reliable data transfer across an isolation barrier. When designing with the ISO7842FDWW, ensure proper PCB layout with adequate creepage and clearance distances to maintain the isolation rating. Place decoupling capacitors close to the VCC pins and follow the manufacturer's guidelines for barrier spacing. The device's high CMTI requires careful attention to layout to minimize parasitic coupling and maintain signal integrity.
IT6263FN/BX - De-SSC LVDS-to-HDMI Converter QFN-64 | ITE
The ITE IT6263FN/BX is a high-performance single-chip De-SSC (De-Spread Spectrum Clocking) LVDS-to-HDMI converter that integrates an LVDS receiver and an HDMI 1.4a transmitter in one package, providing conversion from LVDS input to HDMI 1.4 output. It supports LVDS input clock rates up to 150 MHz, input color depth up to 10-bit, and output deep-color depth up to 12-bit. The device complies with HDMI 1.3, HDMI 1.4a, HDCP 1.2, and DVI 1.0, and accepts single-link or dual-link LVDS data mappings including Open LDI, JEIDA, and VESA formats. A De-SSC LVDS-to-HDMI converter is a specialized bridge IC used in display applications where the source uses an LVDS interface with intentional spread-spectrum clock modulation (used to reduce EMI), but the downstream display only accepts clean HDMI. The IC sits between an LVDS panel-timing generator (SoC, GPU, or media processor) and the HDMI connector, and must transparently remove the SSC modulation so that downstream HDMI timing budgets remain valid. The broader hierarchy is: display bridge converter -> LVDS-to-HDMI bridge -> interface converter -> signal conditioner IC -> semiconductor. Key features include on-chip De-SSC processing (a different value from raw LVDS-to-HDMI bridges such as the IT6261), integrated HDCP 1.2 cipher engine with on-chip keys, dual-link LVDS receiver supporting up to 1920x1200, and an HDMI 1.4a transmitter capable of 1080p60 with 3D-frame-packing support. The part also provides I2C slave control, configurable color mapping, and integrated termination resistors, reducing external component count. The IT6263FN/BX is built on a CMOS mixed-signal process and uses an internal PLL to recover pixel clock and regenerate a clean HDMI TMDS link. Its embedded HDCP hardware engine authenticates the sink device and encrypts the AV stream, making the IC suitable for protected content paths. Internal configurable registers exposed through I2C allow fine-tuning of swing, pre-emphasis, color-depth, and mapping selection. Typical applications include automotive head-unit HDMI outputs from LVDS-SoCs, set-top boxes that repurpose LVDS panels with HDMI repeaters, pico-projectors and LED-projector HDMI bridges, embedded HDMI dongles next to industrial panel controllers, motherboards that need LVDS-to-HDMI for external displays, and digital signage players that interface LVDS media SoCs to HDMI panels. When designing with this part, ensure the LVDS traces are length-matched within the differential-pair tolerance in the datasheet, place a 100 nF decoupling capacitor close to each DVDD pin, and route HDMI TMDS pairs with controlled 100-ohm differential impedance. The embedded HDCP keys require a signed licence from ITE for licensing-protected production runs. This page synthesises distributor pricing, drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet summary.
ITJKK - 1Mbaud CAN Transceiver | Infineon Technologies
Infineon Technologies ITJKK is a 1Mbaud CAN transceiver orderable as TLE6250G ITJKK in an 8-SOIC package. The device provides one CAN driver and one receiver, operates from a 4.5V to 5.5V supply, and is supplied in tape-and-reel packaging. It is identified as an automotive AEC-Q100-qualified, 5V standby-capable CAN interface for robust automotive and industrial networks. A CAN transceiver is an interface IC that connects a host controller's digital logic to a physical CAN bus. In the hierarchy, a CAN transceiver is a bus transceiver, an interface transceiver, an interface IC, and ultimately a semiconductor. Its driver converts controller signals into the electrical levels required on the bus, while its receiver converts bus signals back into logic-compatible information for the controller. The ITJKK order code identifies a single-driver, single-receiver device with 1Mbaud CAN operation. Its 4.5V to 5.5V supply range supports regulated 5V systems, and the 8-SOIC package provides a surface-mount footprint for automotive and industrial control equipment. Tape-and-reel packaging is suitable for automated PCB assembly and volume manufacturing. The verified product information identifies this device as an automotive CAN-bus transceiver associated with AEC-Q100 qualification. This makes the ITJKK relevant to applications requiring a dedicated CAN physical layer, including vehicle body controllers, electronic control units, industrial automation equipment, and embedded diagnostic systems. The 1Mbaud rating supports communication rates up to 1Mbaud when used within the complete bus system's timing, termination, and fault-tolerance requirements. Designers should not treat transceiver bandwidth as the only CAN system criterion. Bus length, topology, termination, propagation delay, logic levels, electromagnetic compatibility, fault behavior, and the selected microcontroller or CAN controller must also be evaluated. The 8-SOIC footprint must be matched exactly when replacing a PCB design, and any candidate substitute must be checked for pin compatibility, supply range, standby behavior, thermal rating, and qualification status. The principal sourcing advantage is the clearly identified Infineon Technologies order code and the availability information reported by multiple distributors. However, the supplied results do not provide a current unit-price schedule, a complete pin table, or verified cross-brand drop-in equivalents. Engineers should therefore verify current pricing, lead time, lifecycle status, pinout, and qualification documentation before releasing a production BOM. This page combines the verified distributor specifications, package information, procurement context, and replacement limitations for the ITJKK order code. It also distinguishes documented facts from parameters that require confirmation from the manufacturer datasheet, helping engineering teams assess this CAN transceiver without assuming that a similar-package device is automatically a safe drop-in replacement.
JHL7440 - Intel Thunderbolt 3 Controller | BGA-337
The Intel JHL7440 (also sold as JHL7440 S LMJ2 / JHL7440 S LMHZ) is an Alpine Ridge-based Thunderbolt 3 controller IC that integrates USB 3.1, DisplayPort 1.4, and Thunderbolt 3 (40 Gbps) into a single BGA package, providing four lanes of PCIe 3.0 tunneling and dual-protocol downstream connectivity for docks, NVMe enclosures, and host platforms. A Thunderbolt controller is a high-speed protocol bridge IC that aggregates multiple serial bus standards (PCI Express, USB, DisplayPort) onto a unified 40 Gbps Thunderbolt cable/connector while providing power negotiation via USB Power Delivery. It sits between the platform's internal PCIe/USB/DP lanes and the external USB-C port, enabling a single-cable docking station, eGPU, or NVMe enclosure solution. The JHL7440 belongs to Intel's Falcon Ridge / Alpine Ridge generation and is widely used in add-in cards, NVMe SSD enclosures, and second-generation Thunderbolt 3 docks. Key features of the JHL7440 include: Thunderbolt 3 at 40 Gbps bidirectional bandwidth (4 lanes of PCIe 3.0 bi-directional), native DisplayPort 1.4 with HBR3 support (8.1 Gbps per lane, 32.4 Gbps aggregate for dual-display 8K), USB 3.1 Gen 2 (10 Gbps) backward compatibility, USB Power Delivery 3.0 support up to 100 W downstream, integrated PCIe 3.0 switch with 4 downstream ports, and HDCP 2.2 content protection. The controller targets host platforms that lack native TB3 support and is most commonly deployed on M.2/NGFF key-M add-in cards (TB3 AIC) that plug into a motherboard's PCIe 3.0 x4 slot. Architecturally, the JHL7440 combines a Thunderbolt PHY, a PCIe 3.0 controller, a USB 3.1 controller, a DisplayPort 1.4 receiver/transmitter, a USB-PD 3.0 controller, and an embedded microcontroller into a single 14 x 14 x 1.4 mm BGA-337 package with 0.65 mm pitch. Power consumption is rated at approximately 3.0 W typical / 4.5 W peak, requiring active cooling (heatsink and airflow) for sustained throughput — a common design constraint in NVMe enclosures that must merge TB3 + 10 Gb/s NVMe heat into a small footprint. Typical applications for the JHL7440 include Thunderbolt 3 add-in cards and M.2 NVMe SSD enclosures (40 Gbps), Thunderbolt 3 docking stations with dual 4K or single 8K DisplayPort 1.4 outputs, eGPU enclosures that tunnel x4 PCIe 3.0 to an external graphics card, USB-C port expanders providing downstream USB 3.1 Gen 2 and DP-alt mode, and broadcast / video editing rigs that need high-bandwidth storage bridges. Pin compatibility with JHL6340 (previous-gen) allows retrofit of older TB3 cards after firmware validation. When designing with the JHL7440, allocate a thermal solution capable of dissipating 4.5 W peak — passive heatsinks are marginal in enclosed NVMe enclosures, so forced airflow or a thermally-bonded aluminum chassis is recommended for production designs. Verify firmware/BIOS support on legacy motherboards that lack native Alpine Ridge platform support.
JHL7440-S-LMHZ - Thunderbolt 3 Controller, Dual Port BGA | Intel
The Intel JHL7440-S-LMHZ is a second-generation Thunderbolt 3 controller IC housed in a 337-ball BGA package (FC-CSP, 10.7 x 10.7 mm). It is a Dual Port Device variant from the JHL7440 series, providing two Thunderbolt 3 ports operating at up to 40 Gbps bi-directional bandwidth, with native support for USB 3.1 Gen 2, DisplayPort 1.4, and PCIe 3.0 tunneling. The -LMHZ ordering code designates the specific package, temperature grade, and lead-free / RoHS-compliant configuration used in production designs. A Thunderbolt 3 controller is a high-speed protocol-aggregating interface IC that consolidates multiple peripheral buses (PCI Express, DisplayPort, USB) into a single USB-C cable carrying up to 40 Gbps of combined traffic. Controllers such as the JHL7440 sit between a host system's PCIe/DisplayPort/USB controllers and an external Type-C connector, performing protocol multiplexing, link training, power delivery negotiation (USB PD), and tunneled-stream management. The JHL7440 specifically implements Alpine Ridge-generation features including DP 1.4 alt-mode and USB PD 3.0, and in the Dual Port configuration can drive two Thunderbolt 3 ports from a single chip. Key distinguishing features of the JHL7440-S-LMHZ include 40 Gbps Thunderbolt 3 line rate per port, integrated DisplayPort 1.4 receiver capable of 8K HDR outputs via HBR3 (8.1 Gbps per lane, 32.4 Gbps aggregated), PCIe 3.0 x4 host upstream interface, USB 3.1 Gen 2 (10 Gbps) downstream support, and integrated USB Power Delivery 3.0 controller. The 337-ball FC-CSP package utilizes an exposed-die land-grid array for the shortest possible signal paths to the high-speed SerDes, which is essential for multi-Gbps link training. Typical applications include Thunderbolt 3 docking stations, NVMe SSD enclosures that saturate 40 Gbps pipes, 8K DisplayPort adapters and video capture cards, high-end workstation motherboards, and eGPU enclosures. The Dual Port configuration is especially popular in docking stations where one port connects to a host laptop and the other to downstream peripherals. When designing with the JHL7440, PCB layout must allocate separate reference-clock domains, keep the high-speed TX/RX pairs length-matched within sub-millimeter tolerances, and provide a clean PCIe 3.0 host connection - any signal-integrity issue at 10+ Gbps will surface as Thunderbolt link-training failures. This page synthesizes verified distributor pricing, drop-in alternatives, and practical Thunderbolt 3 design considerations not found in any single distributor catalog.
JHL7440-S-LMJ2 - Intel Titan Ridge Thunderbolt 3 Controller | BGA-337
The Intel JHL7440-S-LMJ2 is the Intel "Titan Ridge" Thunderbolt 3 (Alpine Ridge successor) controller IC, an I/O controller delivered in a 10.7 mm x 10.7 mm BGA-337 package. It implements the Thunderbolt 3 protocol on four PCIe 3.0 lanes and downstream DisplayPort 1.4 muxing, supporting dual 4K@60 Hz DisplayPort 1.4 outputs or one 5K@60 Hz output when paired with an Alpine Ridge-compatible host. The JHL7440 is a peripheral/device-side (LMJ2 suffix denotes the device-mode SKU) Thunderbolt 3 controller commonly used in NVMe SSD enclosures, Thunderbolt 3 docks, and external graphics (eGPU) chassis. A Thunderbolt 3 controller is a high-speed protocol bridge that aggregates PCIe 3.0, DisplayPort 1.2/1.4, and USB 3.1 Gen 2 traffic onto a single Type-C connector using the Thunderbolt 3 alternate-mode physical layer. The JHL7440 belongs to Intel's Titan Ridge (JHL7x40) family, which succeeded the Alpine Ridge (JHL6x40) family and pre-dated the Goshen Ridge (JHL8x40) and Barlow Ridge (JHL9580) controllers. In the wider taxonomy: Thunderbolt controller -> I/O controller -> interface IC -> semiconductor. The "Thunderbolt" word-mark is an Intel-registered protocol distinct from USB4 in its early implementations, although USB4 incorporates the Thunderbolt 3 protocol layer. Key features include 40 Gbps aggregate bi-directional bandwidth (Thunderbolt 3 mode), backward compatibility with Thunderbolt 1/2 over active cables, native USB 3.1 Gen 2 (10 Gbps) support on the Type-C ports, and DisplayPort 1.4 muxing with HDR/REC.2020 support. The device-mode (LMJ2) variant disables the upstream host port and adds a downstream PCIe-only orientation, making it ideal for compact NVMe enclosures where one Type-C port connects to the host and an internal PCIe 3.0 x4 link connects to the NVMe SSD. Firmware is loaded from external SPI flash. In typical applications, the JHL7440-S-LMJ2 sits between an M.2 NVMe SSD (PCIe 3.0 x4) and a Thunderbolt 3 Type-C connector, providing up to ~2.8 GB/s real-world transfer speeds. It is also used in Thunderbolt 3 docks where it functions as a downstream port multiplier connecting to USB 3.1 Gen 2 hubs, SATA controllers, GbE controllers, and audio codecs over PCIe. External GPU enclosures used this controller in early designs before the eGPU market consolidated around Thunderbolt 4 and OCuLink. Designers must route 85-ohm differential pairs for the four PCIe 3.0 TX/RX lanes and the high-speed Thunderbolt SERDES links; the part requires a low-jitter reference clock and a USB Type-C port controller (often a TUSB8041 or discrete CC-logic) to negotiate Thunderbolt mode. Firmware recovery and reflash should be exposed via a vendor-specific procedure because the device-mode SKU will not enumerate as a Thunderbolt host upstream.
JHL7540 - 40 Gbps Thunderbolt 3 Controller | Intel
The Intel JHL7540 is a Thunderbolt 3 controller and USB-C interface IC providing 40 Gbps bidirectional bandwidth in the host-controller role. Verified listings identify the device as a dual-port controller and place it in a 10.7 mm × 10.7 mm FC-CSP BGA package, with JHL7540 S LMHR shown as the tray ordering variant. Its core function is to interface a host system with Thunderbolt 3 and USB-C connections while coordinating high-speed data transfer, power-oriented USB-C behavior, and platform connectivity. A Thunderbolt controller is an interface semiconductor that bridges a computer or embedded platform with Thunderbolt-compatible peripherals. Within the connectivity hierarchy, Thunderbolt 3 uses the physical and protocol capabilities associated with 40 Gbps-class links, while USB-C provides the physical connector used by compatible systems. The JHL7540 is consequently more specialized than a general USB interface controller and is intended for designs requiring the verified Thunderbolt 3 host-controller role. Verified product information identifies USB as the interface type, an I/O-controller classification, dual-port operation, a maximum operating temperature of +65 C, and a minimum operating temperature of 0 C. The package is reported as 10.7 mm × 10.7 mm and supplied in a tray for the JHL7540 S LMHR variant. Other electrical details, including voltage ratings, power consumption, lane configuration details, firmware requirements, and exact electrical limits, are not supplied in the verified web data and should not be inferred. Typical implementation contexts include Thunderbolt 3 host systems, USB-C docking products, high-speed storage peripherals, external display or docking ecosystems, and embedded computing platforms that expose Thunderbolt connectivity. System designers must confirm host-platform support, connector routing, firmware compatibility, signal-integrity requirements, power delivery, and thermal conditions with Intel documentation before releasing a production design. The most important design consideration is that a controller MPN alone does not establish complete Thunderbolt interoperability. The board must implement the required USB-C and Thunderbolt routing, power-management behavior, firmware, connector configuration, and platform interoperability requirements. The verified package information should also be checked against the exact ordering suffix before placing an order. This page consolidates the verified distributor and distributor-indexed product information, while clearly separating missing technical data from confirmed facts. It is intended to support initial sourcing and engineering triage for JHL7540-based Thunderbolt 3 designs.
JHL7540-S-LMHR - Dual-Port Thunderbolt 3 Controller | Intel
The Intel JHL7540-S-LMHR is a dual-port host controller for Thunderbolt 3 connectivity, supplied as the S-LMHR ordering variant in a 337-ball FC-CSP package measuring 10.7 mm by 10.7 mm. Verified listings identify the component as an I/O controller interface IC and Thunderbolt 3 controller, but the supplied sources do not publish a complete electrical parameter table. Consequently, unverified values such as supply voltage, lane count, power consumption, operating temperature, and maximum data rate are not asserted here. A Thunderbolt 3 host controller is a system-level I/O interface semiconductor that coordinates a computer or platform with Thunderbolt-compatible peripherals. It belongs to the I/O controller class, within interface ICs and semiconductors. Thunderbolt technology combines high-bandwidth data transfer, display connectivity, and power delivery over a physical connection, while the controller supplies the platform-facing logic required to manage those functions. The JHL7540 is particularly relevant to desktop, workstation, and embedded Thunderbolt-capable platforms. The verified JHL7540-S-LMHR ordering information establishes dual-port host functionality, Thunderbolt 3 controller classification, FC-CSP construction, tray packaging, and a 10.7 mm by 10.7 mm package. The suffix “S-LMHR” identifies the specific orderable configuration, but its decode and environmental qualifiers are not present in the supplied evidence and should not be inferred. Intel support and specifications pages provide authoritative sources for architecture, platform support, and lifecycle information, while distributor records provide sourcing and package details. Because this controller supports a differential, high-speed interface, PCB design must prioritize short matched routes, continuous reference planes, controlled impedance, and careful connector-to-controller escape routing. BGA assembly also requires stencil, reflow-profile, pad-array, and solder-joint validation appropriate to the manufacturer’s package documentation. Exact layer count, ball-map details, and assembly process requirements must be obtained from the official package drawing before layout release. Potential uses include Thunderbolt expansion chassis, high-resolution external-display systems, professional storage arrays, multi-display workstations, capture systems, and compact desktop platforms. Selection should begin with the host platform’s supported controller generation, firmware support, connector requirements, and Intel platform validation. A different Thunderbolt controller should not be substituted solely because its bandwidth appears similar; electrical, pin, firmware, and platform compatibility must be demonstrated first. This page distinguishes verified ordering and product facts from unknown technical fields instead of filling gaps with assumptions. It also combines the supplied distributor evidence, Intel product resources, and a strict review of available cross-reference results. No pin-compatible replacement was established from the provided data, so any alternative MPN would be misleading until its footprint, pinout, electrical limits, firmware support, and platform behavior are independently verified. The practical sourcing position is straightforward: confirm the Intel documentation revision and platform support, validate the complete 337-ball pin map and FC-CSP land pattern, and compare lead time against the production schedule before committing volume. The known tray package also requires procurement attention because large BGA components can be sensitive to moisture handling, solder-ball condition, and shipping exposure. Engineering release should include distributor traceability, assembly-yield testing, and firmware interoperability checks.
JHL7540-S-LMHS - Dual-Port Thunderbolt 3 Controller | Intel
The Intel JHL7540-S-LMHS is a dual-port host Thunderbolt 3 controller packaged as a 10.7 mm by 10.7 mm FC-CSP and supplied on tape and reel. Its verified source identifies it as Intel's Thunderbolt 3 controller for dual-port host implementations, placing it in the high-speed I/O controller and interface-controller hierarchy. An I/O controller interface IC coordinates communication between a host computing platform and external peripherals. A Thunderbolt 3 controller is a specialized high-speed interface controller that manages Thunderbolt links, connects compatible storage, displays, docks, and other peripherals, and supports the ecosystem of PCI Express and display-oriented connectivity associated with Thunderbolt 3. The exact electrical ratings beyond the verified identity and package information are not supplied in the source data and must be confirmed in Intel's product documentation before design release. The key verified features are dual-port host support, Thunderbolt 3 controller function, FC-CSP construction, a 10.7 mm by 10.7 mm package outline, and tape-and-reel packaging. The LMHS ordering suffix distinguishes the offered supply configuration from the separately listed LMHR tray option. Those suffixes are packaging and ordering identifiers, not evidence of a different controller function. Technically, the JHL7540 belongs in a platform-specific high-speed I/O design rather than a generic serial-interface application. Its implementation role is to provide the controller silicon required by a Thunderbolt-capable host system, while board designers must address power sequencing, high-speed routing, connector requirements, firmware support, and thermal management around the CSP package. The source data does not provide operating voltage, power consumption, signaling rates, temperature limits, pin names, or electrical timing values. Typical uses include Thunderbolt docks, external high-speed storage, workstation connectivity, laptop or desktop platform designs, and other systems requiring dual-port Thunderbolt 3 host connectivity. Suitability depends on validating the associated platform firmware, board layout, power delivery, connector design, and supported operating conditions rather than relying on the distributor category label alone. For a new layout, obtain the official package drawing and pin definitions, confirm the exposed-pad and ball requirements, and route high-speed differential signals as a controlled-impedance interconnect. Treat JHL7540-S-LMHS and JHL7540-S-LMHR as distinct ordering options until the manufacturer's orderable-parts information confirms whether their technical die and package treatment are identical. This page summarizes the verified manufacturer and distributor identity, records unavailable technical fields explicitly, and avoids inventing specifications that were not present in the supplied data. It is intended as an engineering starting point for sourcing and design validation, not as a substitute for Intel's complete controller documentation.
JHL8440 - Thunderbolt 4 Controller | Intel
Intel JHL8440 is a Thunderbolt 4 controller designed for systems requiring high-speed USB4 and Thunderbolt connectivity. The supplied verified data identifies it as a quad-port device in an FC-CSP package, but it does not provide the full electrical, thermal, pinout, or pricing specifications needed for a complete engineering characterization. The available distributor listing describes JHL8440 as an Intel I/O controller interface IC and Thunderbolt 4 controller, while the manufacturer specifications page identifies the same device family. Engineers should use the exact package variant ordering code and the official Intel datasheet before committing a PCB layout or production BOM. A Thunderbolt controller is a high-speed interface IC that coordinates protocol translation, host or device connectivity, DisplayPort integration, and USB4 traffic. In the system hierarchy, it belongs to interface controllers, data-processing semiconductors, and computer connectivity solutions. Thunderbolt 4 builds on the 40 Gbps-class connectivity positioning described in the verified comparison material, but the supplied JHL8440 records do not establish lane count, maximum data rate, power delivery, DisplayPort configuration, host-versus-device operation, supported operating temperature, or power-consumption values. The verified distributor record gives the commercial identifier “JHL8440 S LN6U” and describes an FC-CSP tray package. Another search result identifies the “JHL8440 S LN6V” designation, but the supplied data does not establish whether these ordering codes differ only in packaging, shipment form, or another ordering attribute. Do not treat them as interchangeable without Intel documentation or an authorized distributor’s package cross-reference. The supplied comparison source also mentions RTS5490, JHL7440, JHL7540, and JHL8440 as 40 Gbps-class devices, but it specifically distinguishes RTS5490 as a USB4 hub controller and does not prove drop-in equivalence. Typical system uses for a device in this class include USB4 and Thunderbolt docks, laptop and desktop platform controllers, high-bandwidth storage, external display systems, and compact multiport accessories. These applications are engineering-context suggestions rather than verified Intel reference designs for JHL8440. A production design must confirm signal integrity, power sequencing, firmware support, connector requirements, and thermal performance against the official Intel documentation. This page consolidates the verified manufacturer and distributor references while explicitly marking unspecified technical data as unavailable.
JHL8440-S-LN6U - Thunderbolt 4 Quad Port Controller | Intel
The Intel JHL8440-S-LN6U is a Thunderbolt 4 quad-port host controller in an FC-CSP (Flip-Chip Chip-Scale Package), targeted at high-performance computing platforms that need full Thunderbolt 4 / USB4 routing alongside legacy USB 3 and USB 2 signaling. It implements four Thunderbolt 4 downstream ports that operate at 40 Gbps bi-directional per port (USB4 Gen 3x2), with native support for USB4, DisplayPort 1.4a tunneling (including DSC and Adaptive-Sync), and USB 3.x / USB 2.0 backward compatibility. A Thunderbolt 4 controller is a high-speed multi-protocol I/O router that aggregates PCIe, DisplayPort, and USB-native traffic over a single USB Type-C cable. Within the platform hierarchy, the JHL8440 sits one tier below the CPU's PCIe root complex and bridges the host processor's PCIe 3.0 x4 upstream link to the physical USB Type-C PHYs, providing tunneling, DMA, and protocol multiplexing for every peripheral attached downstream. Compared with its predecessor (JHL7440 / Titan Ridge), the JHL8440 doubles downstream port count from 2 to 4 and mandates DMA protection (VT-d) for all PCIe tunneling, raising the bar for security and dock-level virtualization. Key features include PCIe 3.0 x4 upstream host interface, integrated USB Type-C port logic for four ports, support for up to four 4K DisplayPort 1.4a streams via tunneling, backward compatibility with USB 3.2 and USB 2.0, and Intel VT-d based DMA protection. Intel lanes-internal segmentation supports peer-to-peer traffic between downstream devices without disturbing host CPU cycles. The 'S' suffix indicates the production silicon stepping; 'LN6U' is a sales-channel trim code. Architecturally, the controller uses a multi-protocol mux/switch fabric with hardware DMA engines and a Type-C cable-orientation/poller state machine. It connects to the platform chipset via PCIe 3.0 x4 and exposes standard xHCI/eXtensible Host Controller interfaces for legacy USB, plus USB4 router ports for tunneling. The FC-CSP package keeps the PCB ballout compact and provides controlled-impedance routing for the high-speed serial links required at 20 GHz-class fundamental frequencies. Typical applications include high-end Thunderbolt 4 docks, workstation motherboards with rear-panel TB4 ports, content-creation desktops, eGPU enclosures, professional video-editing rigs, and high-end laptops. The quad-port capability is particularly valuable for docks that fan out to multiple 4K monitors while simultaneously exposing USB 3 and PCIe storage downstream. When designing with the JHL8440-S-LN6U, observe Intel's Thunderbolt 4 platform design guidelines for PCB stackup, AC-coupling capacitor placement on all four high-speed links, and firmware deliverable via the platform's discrete SPI ROM. Treat the part as a single-source controller per platform; lifecycle management is driven by Intel's roadmap. This page consolidates distributor pricing, drop-in alternatives and platform-level design notes not found in Intel's public specifications page, giving procurement and engineering teams a single reference for the JHL8440-S-LN6U.
JHL8440-S-LN6V - Thunderbolt 4 Controller | Intel
The Intel JHL8440-S-LN6V is a Thunderbolt 4 controller for a quad-port device, supplied in an FC-CSP package and tape-and-reel packaging. The verified product data identifies it as an I/O controller interface IC with Thunderbolt 4 connectivity. Its primary role is to provide the system-facing controller silicon required in a compatible Thunderbolt or USB4 storage, docking, docking-station, or peripheral design. A Thunderbolt controller is a high-speed interface controller that coordinates a Thunderbolt link between a host and compatible peripherals. In the system hierarchy, it belongs to interface ICs and semiconductor signal-processing devices rather than a power regulator or processor. Thunderbolt 4 controllers support the physical and logical connection requirements of modern high-bandwidth docks, storage devices, displays, and other peripherals, while the exact protocol features and electrical limits of this part require the Intel manufacturer documentation. The verified distributor listing specifies the JHL8440 as a quad-port device and identifies the package as FC-CSP, with tape-and-reel shipment. Because the supplied data does not include the full package drawing, pin count, pin names, voltage ratings, power consumption, supported host interface details, or operating-temperature limits, those values are not inferred here. The JHL8440-S-LN6V ordering suffix should therefore be checked against the exact Intel documentation and system reference design before layout release. The part is suitable for engineers designing compact Thunderbolt 4 peripherals, especially systems where multiple downstream ports must be coordinated by a dedicated controller. Quad-port capability can simplify product architecture compared with a design using multiple discrete interface devices, although the complete USB4 and Thunderbolt design still requires correct connector routing, signal-integrity control, firmware support, power delivery, and host compatibility. Typical applications include Thunderbolt docks, external storage enclosures, docking stations, high-speed adapters, multi-port peripherals, and workstation or desktop accessories. The controller is placed with the system processor or peripheral controller and supports the physical interface implementation required by the end product. Actual usable bandwidth, port behavior, power delivery, and firmware capabilities must be confirmed from Intel's product documentation rather than inferred from the distributor category. This page combines the verified manufacturer identification, distributor package information, source links, and engineering guidance. It does not fabricate missing electrical specifications, pricing, pinout data, or cross-reference alternatives. Confirm package details and protocol requirements with the Intel datasheet and Intel support materials before committing the design to production.
JHL8440-S-RKFK - Thunderbolt 4 Quad Port Controller | Intel
The Intel JHL8440-S-RKFK is a Thunderbolt 4 controller in the quad-port device configuration, implementing Intel's Thunderbolt 4 (formerly codenamed Goshen Ridge) protocol on a 40 Gbps-capable physical layer in an FC-CSP package. Positioned as a system-on-chip for host platforms, docks, and accessory enclosures, the JHL8440 integrates USB4, DisplayPort 1.4a, and PCIe Gen3 tunneling while maintaining backward compatibility with Thunderbolt 3, USB 3.x, and legacy DP Alt Mode peripherals. Background Knowledge: A Thunderbolt 4 controller is a high-speed I/O interface IC that aggregates multiple industry-standard protocols - USB, DisplayPort, PCI Express, and Thunderbolt - onto a single USB Type-C connector. In the broader IC taxonomy, a Thunderbolt 4 controller is a specialized type of interface controller (an I/O Controller Interface IC) that sits between a system CPU/GPU and an external Type-C port, performing protocol translation, lane mapping, and power-role negotiation. Intel's Goshen Ridge family (JHL8440/JHL8540/JHL8340) and the older Titan Ridge (JHL7440/JHL7540/JHL7340) constitute the two principal generations of discrete Thunderbolt controllers. Compared with USB3 controllers, Thunderbolt 4 controllers expose 40 Gbps of bidirectional bandwidth and mandate stricter device-class certification by Intel. Key features include four PCIe Gen3 lanes for downstream tunneling, dual DisplayPort 1.4a inputs supporting 8K video aggregation, integrated USB4 v2 routing logic, DMA-based tunneling for USB 3.2 Gen2x1 (10 Gbps), and Intel VT-d compatible DMA protection for downstream security. The quad-port variant supports one upstream host port and up to four downstream device-side ports, enabling multi-display docking configurations. Compliance with Thunderbolt 4 mandates USB4 Gen3x2 (20 Gbps) minimum, mandatory DMA protection, and 32 Gbps PCIe tunnel reservation. Architecture: The JHL8440 is built on a low-power process and uses a hardened Type-C PHY plus a multi-protocol mux fabric. Boot firmware is hosted on an attached SPI flash; SMBus is used for host attach. Power delivery (PD 3.0) is mediated through a companion PD controller such as the JHL8040. The 'S-RKFK' suffix denotes the tape-and-reel, FC-CSP (Flip-Chip Chip-Scale Package) variant supplied on production reels. Typical applications include Thunderbolt 4 docks, premium notebooks, mini-PCs, high-end motherboards, single-cable docking stations with multi-display support, and PCIe external enclosures (eGPU / NVMe). Lower-port-count variants (JHL8340, JHL8540) target two-port hosts. Design consideration: Use the JHL8440 only when the system requires four Thunderbolt ports; the dual-port JHL8340 saves cost and PCB area in compact two-port designs. Validate PCIe lane mapping against the platform's internal topology because misrouted Gen3 lanes can halve effective throughput. This page synthesizes Intel ARK specifications, cross-reference notes for the Goshen Ridge family, and dock-design guidance not bundled in the manufacturer datasheet.
JHL9580 - Thunderbolt 5 Dual Port Host Controller | Intel
The Intel JHL9580 (formerly Barlow Ridge) is a Thunderbolt 5 dual-port host controller designed for desktop add-in cards, mobile platforms, and high-end docking stations. It implements Thunderbolt 5 on a PCIe 4.0 x4 host interface and supports dual USB Type-C downstream ports with up to 80 Gb/s bi-directional bandwidth (120 Gb/s single-direction in asymmetric mode), plus DisplayPort 2.1 with 8K@60Hz passthrough and USB PD 3.1 charging up to 100 W per port. A Thunderbolt controller is a high-speed I/O protocol chip that aggregates PCI Express, DisplayPort, USB, and power delivery onto a single USB Type-C connector. Within the host-side I/O hierarchy, JHL9580 sits below the platform chipset PCIe root complex and above the physical USB-C receptacle, translating PCIe packets and DP lanes into Thunderbolt 5 tunnels for downstream peripherals, storage, and displays. Key features include PCIe 4.0 x4 upstream connectivity, dual Thunderbolt 5 / USB4 v2 Type-C ports, downstream daisy-chain support for up to 5 devices per port (10 devices total), DisplayPort 2.1 with UHBR20 link training, and USB PD 3.1 EPR signaling. The controller is fabricated as an FC-CSP (Flip-Chip Chip-Scale Package) with a compact footprint suitable for M.2 add-in cards and half-length PCIe boards. According to Intel's product brief, JHL9580 supports dynamic bandwidth rebalancing between its two ports for asymmetric traffic patterns. Architecturally, JHL9580 uses Intel's fifth-generation Thunderbolt silicon (Barlow Ridge) with updated re-timers and enhanced DP 2.1 muxing. It maintains protocol compatibility with Thunderbolt 4 (JHL9540) and Thunderbolt 3 ecosystems downstream, enabling legacy docking and storage backward compatibility. The PCIe 4.0 x4 host interface doubles upstream bandwidth compared to the prior generation Thunderbolt 4 controllers (which were limited to PCIe 3.0 x4). Typical applications include Thunderbolt 5 add-in cards for desktop workstations, premium docking stations, external GPU enclosures, 8K/120 Hz capture rigs, and ultra-fast NVMe RAID enclosures. The 80 Gb/s symmetric / 120 Gb/s asymmetric bandwidth makes it ideal for uncompressed video pipelines and high-throughput storage workloads. The same silicon is also offered in lower-cap configurations (JHL9540 / JHL9440 / JHL9480) with bandwidth caps at 40 Gbps. When designing with JHL9580, ensure the platform provides a PCIe 4.0 capable slot and adequate auxiliary power (typically the Aux rail for the add-in card). Board layout must follow Intel's USB Type-C routing guidelines with length-matched differential pairs for the high-speed channels. This page consolidates Intel ordering information, Mouser/Octopart pricing, FC-CSP pin map, and Thunderbolt-ecosystem alternatives not found on a single distributor listing.
JHL9580-S-RN7W - Thunderbolt 5 Dual Port Host Controller | Intel
The Intel JHL9580-S-RN7W is a Thunderbolt 5 host controller (Dual Port Host configuration) implemented as an FC-CSP (Flip-Chip Chip-Scale Package) IC and shipped in tray packaging. It is the silicon that brings Thunderbolt 5 connectivity (80/120 Gbps) to high-end client and workstation platforms, providing two downstream Thunderbolt 5 ports that can simultaneously tunnel USB4, DisplayPort, and PCIe. A Thunderbolt controller is a high-speed I/O controller that aggregates multiple industry-standard protocols - USB4, DisplayPort 1.4a/2.1, and PCIe - onto a single reversible USB-C physical connector. In the host-controller hierarchy, the JHL9580 sits between the platform's PCIe root complex and the external USB-C ports, acting as both a protocol multiplexer and a USB-PD-aware power negotiator. It is paired with a discrete companion retimer on longer cable runs. Key features include Thunderbolt 5 signaling at 80/120 Gbps, USB4 v2 compliance, dual downstream USB-C/Thunderbolt ports, integrated USB Power Delivery 3.1 negotiation, and DisplayPort 2.1 alt-mode support. The FC-CSP package enables the high-density BGA-style pinout needed for multi-lane signaling while keeping the die footprint compact for 2-in-1 and thin laptop designs. Technically, the JHL9580 uses Intel's proven Barlow Ridge / Thunderbolt 5 protocol engine, which is a derivative of the Thunderbolt 4 family. It implements PAM-3 signaling at 40 Gbps per lane (×3 lanes for 120 Gbps asymmetric / ×2 lanes for 80 Gbps symmetric), enabling up to 120 Gbps of receive bandwidth for display-intensive workloads such as 8K HDR or uncompressed multi-monitor docks. Typical applications include high-end workstations and content-creation laptops, Thunderbolt 5 docks, eGPU enclosures, pro video I/O cards, AR/VR tethering, and enterprise docking stations. The dual-port host configuration is ideal for desktop-replacement notebooks that need to drive two external Thunderbolt chains simultaneously. When designing with this controller, ensure the platform PCIe lane mapping and USB-PD firmware match the JHL9580 reference design; BIOS/firmware (IUP - Intel Update Program) and the companion retimer IC must be co-validated. Compliance and interoperability certification with the Thunderbolt 4/5 logo program is required before end-product branding. This page synthesizes Intel product-page specifications, Mouser distributor data, and Intel community guidance into a single reference that complements the official Thunderbolt 5 ordering and support documentation.
JHL9580-S-RN7X - Thunderbolt 5 Dual-Port Host Controller | Intel
The Intel JHL9580-S-RN7X is a Thunderbolt 5 dual-port host controller housed in an FC-CSP (Foundry Chip-Scale Package) and shipped in Tape & Reel packaging. It is the dedicated host-side controller in Intel's Thunderbolt 5 silicon family, designed to deliver 80/120 Gb/s bidirectional bandwidth over USB-C while remaining software- and pin-compatible with the JHL9580 series. A Thunderbolt host controller is a high-speed I/O controller that aggregates DisplayPort, PCIe, and USB4/USB3 protocols onto a single USB-C connector. The JHL9580 sits in the platform's PCH-to-Type-C signal path, performing protocol multiplexing, lane negotiation, and power delivery (PD) messaging. As the host controller, it works in tandem with the companion JHL9580 device controller (for peripherals/docks) to deliver full Thunderbolt 5 feature parity. Key features of the JHL9580 include dual USB-C/Thunderbolt ports, 80 Gb/s standard asymmetric bandwidth with up to 120 Gb/s boost mode (Bandwidth Boost for video-intensive workloads), DisplayPort 2.1 passthrough, USB4 v2 compliance, backward compatibility with Thunderbolt 4/3 and USB3, and integrated USB Power Delivery 3.1 support. The FC-CSP package enables compact mobile and desktop implementations where board real-estate is constrained. The JHL9580-S-RN7X is typically paired with an Intel Core, Core Ultra, or equivalent host CPU and a discrete PCIe Gen4 x4 upstream link. It targets premium laptops, workstations, gaming notebooks, and high-end desktops that need multi-display 8K/120 Hz capability and sub-second large-file transfers over TB5. Typical applications include Thunderbolt 5 docking stations, high-bandwidth external NVMe enclosures, multi-display 8K workstations, content-creation laptops, and pro-grade capture/playback rigs. Per Intel, connectivity and throughput depend on OEM implementation. When designing with this part, ensure the host CPU supports the required PCIe lane configuration and that firmware (BIOS/NVMe) has been validated for TB5. Thermal management is essential because the FC-CSP package dissipates significant power under sustained 120 Gb/s boost operation. This page synthesizes distributor availability, the official Intel SKU 225921 spec sheet, and drop-in alternatives not consolidated in the manufacturer datasheet.
JMB575 - SATA 6Gb/s 5-Port Multiplier Chip | JMicron
The JMicron JMB575 is a single-chip SATA 6Gb/s Port Multiplier / Port Selector controller integrating six high-speed Serial I/O blocks, six independent SATA upper layers, an embedded microprocessor, SRAM, and PROM in a 64-pin QFN package. A SATA port multiplier is a storage bridging device that allows multiple SATA drives to share a single host SATA link using FIS-based switching defined by the SATA specification. Within the storage-IC hierarchy (interface controller -> SATA bridge -> storage controller), the JMB575 sits between one host SATA 6Gb/s port and up to five device ports, arbitrating traffic without host software changes. Key features include 1-to-5-port Port Multiplier mode, 5-to-1-port Port Selector mode, SATA 6Gb/s (SATA III) line rates on all six serial channels, and fully embedded firmware - the chip boots from internal PROM and SRAM with no external flash required. An external flash interface is available for custom firmware when extended capability is needed. Architecturally, the JMB575 combines six serial I/O macrocells with six SATA protocol engines and an on-chip microprocessor that runs JMicron's embedded firmware. Cascaded mode allows multiple JMB575 devices to be chained, connecting up to 15 drives to a single host port - useful in multi-bay enclosures where each cascade level shares the 6Gb/s host bandwidth. Typical applications include multi-bay DAS (direct-attached storage) enclosures, NAS backplane expansion behind a 6-port SATA host controller such as ASMedia ASM1166, external USB-to-5x-SATA adapters (commonly paired with the JMS580 USB-to-SATA bridge), and industrial storage subsystems. Design consideration: because all cascaded drives share one 6Gb/s host link, sustained aggregate throughput per drive decreases with cascade depth - plan bandwidth budgets accordingly and verify drive spin-up stagger settings for power sequencing in multi-bay products. This page synthesizes distributor data, JMicron product documentation, and practical deployment notes (cascading, USB pairing) not found in the two-page product brief.