ATMEGA325P-20AUR vs ATMEGA329P-20AU Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ATMEGA325P-20AUR sa pamamagitan ng Microchip Technology at ATMEGA329P-20AU sa pamamagitan ng Microchip Technology. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Microchip Technology
ATMEGA325P-20AUR - 8-bit AVR MCU 32KB 20MHz | Microchip
ATMEGA325P-20AUR ✓ NakahandaMicrochip Technology
ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64
ATMEGA329P-20AU ✓ NakahandaPagsanggunian na paghahambing
| Parametro | ATMEGA325P-20AUR | ATMEGA329P-20AU |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Kategorya | Microcontrollers | Microcontrollers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Core Architecture | AVR 8-bit RISC | AVR (8-bit RISC, Harvard) |
| CPU Speed | 20 MHz | — |
| Throughput | Up to 20 MIPS at 20 MHz | Up to 20 MIPS at 20 MHz |
| Flash Program Memory | 32 KB (16K x 16) | — |
| SRAM | 2 KB | 2 KB (2K x 8) |
| EEPROM | 1 KB | 1 KB |
| ADC | 8-channel, 10-bit | 10-bit, up to 8 single-ended channels |
| Supply Voltage Range | 1.8 V to 5.5 V | — |
| Instructions | 131 powerful instructions, most single-cycle | — |
| Debug Interface | JTAG (on-chip debug and boundary scan) | JTAG (IEEE 1149.1 compliant) |
| I/O Lines | 54 general-purpose I/O | — |
| Low Power Technology | picoPower | — |
| Packhaging | 64-TQFP (14x14 mm) | 64-pin TQFP (14x14 mm, 0.8 mm pitch) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Temperature na Operasyon | -40C to +85C (industrial) | -40C to +85C (industrial, -A suffix) |
| Programming | In-System Programmable (ISP) Flash | — |
| Tindminan RoHS | Compliant | Compliant (Pb-free / Green) |
| Instruction Set | — | 131 instructions, mostly single-cycle |
| Program Memory (Flash) | — | 32 KB (16K x 16), In-System Programmable with RWW |
| Maximum Clock Speed | — | 20 MHz |
| Supply Voltage (Vcc) | — | 2.7 V to 5.5 V (10 MHz max below 4.5 V; 20 MHz requires 4.5-5.5 V) |
| General-Purpose I/O Pins | — | 54 |
| General-Purpose Working Registers | — | 32 |
| PWM Channels | — | 6 |
| Communication Peripherals | — | 2x USART, 1x TWI (I2C), 1x SPI (also ISP) |
| Power-Save Modes | — | Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby (picoPower) |
| QTouch Support | — | Yes (peripheral touch controller via library) |