ATSAM4S8CA-CUR vs ATSAM4N16CA-CUR Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ATSAM4S8CA-CUR sa pamamagitan ng Microchip Technology at ATSAM4N16CA-CUR sa pamamagitan ng Microchip Technology. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Microchip Technology
ATSAM4S8CA-CUR - ARM Cortex-M4 MCU 120MHz 512KB Flash | Microchip
ATSAM4S8CA-CUR ✓ NakahandaMicrochip Technology
ATSAM4N16CA-CUR - Cortex-M4 100MHz 1MB Flash MCU | Microchip
ATSAM4N16CA-CUR ✓ NakahandaPagsanggunian na paghahambing
| Parametro | ATSAM4S8CA-CUR | ATSAM4N16CA-CUR |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Kategorya | Microcontrollers | Microcontrollers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Core | ARM Cortex-M4 with FPU | — |
| Core Architecture | ARMv7-M | — |
| Maximum Clock Speed | 120 MHz | — |
| Program Memory (Flash) | 512 KB | — |
| SRAM | 128 KB | — |
| Supply Voltage (VDDIO) | 1.62 V to 3.6 V | — |
| Temperature na Operasyon | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| Packhaging | 100-TFBGA (9x9 mm) | 100-TFBGA (9x9 mm) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| USB | USB 2.0 Full-Speed with on-chip transceiver | — |
| CAN | Up to 2 CAN 2.0B controllers | — |
| ADC | 10-bit ADC | — |
| DMA Channels | 12 | — |
| External Bus Interface | Yes (EBI) | — |
| Active Power (typ) | 30 mA at 100 MHz | — |
| Back-up Mode Current | 3 uA at 1.8 V (RTC running) | — |
| Tindminan RoHS | Compliant | Compliant (Green, MRL A) |
| Level ng MSL | [DATA_NEEDED: MSL rating] | — |
| AES Hardware Accelerator | Not present on S8 variant | — |
| Series | SAM4S (pin-to-pin with SAM4N/SAM3S/SAM3N/SAM7S) | SAM4N |
| Core Processor | — | ARM Cortex-M4 |
| Core Size | — | 32-Bit |
| Maksimum na Taktiko ng Oras | — | 100 MHz |
| Flash Memory Size | — | 1 MB (1M x 8) |
| SRAM Size | — | 80 KB |
| Supply Voltage Range | — | 1.62 V to 3.6 V |
| Supply Voltage (Typical) | — | 2.5 V / 3.3 V |
| Instruction Set | — | Thumb-2 |
| DSP Instructions | — | Yes |
| Memory Protection Unit (MPU) | — | Yes |
| Number of UARTs | — | 7 |
| Number of SPI Interfaces | — | 4 |
| Number of I2C Interfaces | — | 3 |