ATSAM4SD32CA-CFU vs ATSAM4SD16CB-CFNR Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ATSAM4SD32CA-CFU sa pamamagitan ng Microchip Technology at ATSAM4SD16CB-CFNR sa pamamagitan ng Microchip Technology. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Microchip Technology
ATSAM4SD32CA-CFU - 120MHz Cortex-M4 MCU, 2MB Flash | Microchip
ATSAM4SD32CA-CFU ✓ NakahandaMicrochip Technology
ATSAM4SD16CB-CFNR - SAM4S Cortex-M4 120MHz 1MB MCU | Microchip
ATSAM4SD16CB-CFNR ✓ NakahandaPagsanggunian na paghahambing
| Parametro | ATSAM4SD32CA-CFU | ATSAM4SD16CB-CFNR |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Kategorya | Microcontrollers | Microcontrollers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Core Architecture | ARM Cortex-M4 | — |
| Core Bit Width | 32-bit | — |
| Maksimum na Taktiko ng Oras | 120 MHz | — |
| Program Memory (Flash) | 2 MB (2048 KB) | 1 MB (2 x 512 KB dual-bank) |
| Data Memory (SRAM) | 160 KB | — |
| Packhaging | 100-pin VFBGA (7x7 mm, 0.65 mm pitch) | 100-VFBGA (7x7 mm) |
| Operating Voltage Range | 1.62 V to 3.6 V | — |
| I/O Pins | [DATA_NEEDED: maximum I/O pin count] | — |
| USB Interface | USB 2.0 Full-Speed Device/Host/OTG | — |
| CAN Controllers | 2 (CAN 2.0A/B) | — |
| UART/USART | [DATA_NEEDED: exact USART count] | — |
| TWI (I2C-compatible) | [DATA_NEEDED: exact TWI count] | — |
| ADC | 12-bit, up to 1 Msps | 1 x 16-channel 12-bit ADC |
| External Bus Interface (EBI) | Yes | — |
| Supply Voltage (typical) | 1.2 V core / 3.3 V I/O | — |
| Temperature na Operasyon | -40 C to +85 C (industrial) | -40 C to +85 C (extended) |
| Tindminan RoHS | Compliant | Compliant |
| Uri ng Pagpapasok | Surface Mount | Surface Mount (BGA) |
| Level ng MSL | 3 | 3 (per JEDEC J-STD-020) |
| Core | — | ARM Cortex-M4F (32-bit, single-precision FPU) |
| Core Frequency | — | 120 MHz |
| SRAM | — | 160 KB |
| Supply Voltage (VDDCORE) | — | 1.2 V (typ) |
| I/O Supply Voltage (VDDIO) | — | 1.62 V to 3.6 V |
| Peripherals | — | HS USB, CAN, EMAC, USART, SPI, TWI, EBI |
| Timers | — | Multiple TC, PWM, RTC |
| External Interrupt Controller | — | Yes (16-line) |
| Silicon Revision | — | Revision B (recommended for new designs) |