ATSAM4SD32CA-CUR vs ATSAM4S8CA-CU Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ATSAM4SD32CA-CUR sa pamamagitan ng Microchip Technology at ATSAM4S8CA-CU sa pamamagitan ng Microchip Technology. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Microchip Technology
ATSAM4SD32CA-CUR - 120MHz Cortex-M4 MCU 2MB Flash | Microchip
ATSAM4SD32CA-CUR ✓ NakahandaMicrochip Technology
ATSAM4S8CA-CU - ARM Cortex-M4 MCU 120MHz 512KB Flash | Microchip
ATSAM4S8CA-CU ✓ NakahandaPagsanggunian na paghahambing
| Parametro | ATSAM4SD32CA-CUR | ATSAM4S8CA-CU |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Kategorya | Microcontrollers | Microcontrollers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Core | ARM Cortex-M4 with FPU | — |
| Maximum CPU Clock | 120 MHz | — |
| Program Memory | 2 MB Flash | — |
| SRAM | 160 KB | 128 KB |
| Backup SRAM | 2 KB | — |
| Supply Voltage (VDDIO/VDD) | 1.62 V to 3.6 V | — |
| Core Voltage (internal LDO) | 1.2 V | — |
| Number of I/O Pins | Up to 79 | — |
| Packhaging | 100-ball TFBGA (9x9 mm) | 100-pin TFBGA (9x9 mm) |
| Uri ng Pagpapasok | Surface Mount (Tape & Reel) | Surface Mount |
| Temperature na Operasyon | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) |
| ADC | 16-bit, up to 24 channels, 1 Msps | 12-bit |
| USB | USB 2.0 Full-Speed Device/Host with on-chip PHY | USB 2.0 Full-Speed, on-chip transceiver |
| Ethernet MAC | 10/100 Mbps MII/RMII | — |
| Tindminan RoHS | Compliant | Compliant (per Heisener listing) |
| Level ng MSL | 3 (168 hours) | [DATA_NEEDED: MSL Level] |
| Process Technology | [DATA_NEEDED: process node] | — |
| Core Architecture | — | ARM Cortex-M4 |
| Core Width | — | 32-bit |
| Maximum Clock Speed | — | 120 MHz |
| Program Memory (Flash) | — | 512 KB (512K x 8) |
| Instruction Cache | — | 2 KB |
| DSP Extensions | — | Yes (single-cycle MAC, hardware multiply) |
| Memory Protection Unit (MPU) | — | Yes |
| Instruction Set | — | Thumb-2, ARM Cortex-M4 |
| Supply Voltage (Vcc/Vdd) | — | 1.62 V to 3.6 V |
| External Bus Interface (EBI) | — | 16-bit (SDRAM/SRAM/NAND/NOR) |
| CAN | — | CAN 2.0A/B |
| Active Current | — | Approx. 30 mA at 100 MHz (per datasheet) |
| Back-up Mode Current (RTC, 1.8 V) | — | 3 uA |
| Pin-to-Pin Compatibility | — | SAM4S, SAM4N, SAM3S, SAM3N, SAM7S (64-/100-pin) |