ATSAMD21J16B-MUT vs ATSAMD21J17A-MUT Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ATSAMD21J16B-MUT sa pamamagitan ng Microchip Technology at ATSAMD21J17A-MUT sa pamamagitan ng Microchip Technology. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Microchip Technology
ATSAMD21J16B-MUT - 48MHz Cortex-M0+ 64KB Flash MCU | Microchip
ATSAMD21J16B-MUT ✓ NakahandaMicrochip Technology
ATSAMD21J17A-MUT - 48MHz Cortex-M0+ MCU, 128KB Flash | Microchip
ATSAMD21J17A-MUT ✓ NakahandaPagsanggunian na paghahambing
| Parametro | ATSAMD21J16B-MUT | ATSAMD21J17A-MUT |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Kategorya | Microcontrollers | Microcontrollers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Core Architecture | ARM Cortex-M0+ (32-bit) | — |
| CPU Frequency (max) | 48 MHz | — |
| CoreMark/MHz | 2.46 | 2.46 |
| Flash Memory | 64 KB | — |
| SRAM | 8 KB | 16 KB |
| Operating Voltage | 1.62 V to 3.63 V | — |
| GPIO Count (max) | 52 | — |
| Packhaging | 64-QFN (9x9 mm) with Exposed Pad | 64-QFN (9x9 mm) |
| Pin/Package Count | 64 | — |
| Temperature na Operasyon | -40 C to +85 C (industrial) | -40C to +85C (industrial) |
| SERCOM Interfaces | 6 (configurable as I2C/SPI/UART) | — |
| USB | Full-Speed USB 2.0 Device with on-chip transceiver | Full-Speed USB 2.0 Device/Host with on-chip transceiver |
| DMA Channels | 12 | — |
| Event System Channels | 12 | — |
| ADC | 12-bit, up to 20 channels (SAR) | 12-bit, up to 350 ksps |
| DAC | 10-bit, 1 channel | 12-bit, 1 MSPS |
| Timers/Counters | One 16-bit TC, One 8-bit TC, RTC | — |
| External Interrupts | 16 (plus 1 NMI) | — |
| Debug Interface | Serial Wire Debug (SWD), 2-pin | — |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Level ng MSL | MSL3 (168 hours) | [DATA_NEEDED: MSL level] |
| Tindminan RoHS | Compliant (Green) | Compliant |
| Core | — | ARM Cortex-M0+ (32-bit) |
| Series | — | SAM D21J (Functional Safety / FuSa) |
| Maximum CPU Frequency | — | 48 MHz |
| Program Flash | — | 128 KB (128K x 8) |
| RWW Flash Section | — | 4 KB |
| Supply Voltage (VDDIN) | — | 1.62 V to 3.63 V |
| I/O Pins | — | 52 (typical for SAM D21J QFN64) |
| SERCOM Modules | — | 6 (each configurable UART/SPI/I2C) |
| Analog Comparators | — | 2 |
| Timers (TC/TCC) | — | 8 (3 x TCC, 5 x TC) |
| RTC | — | Yes, with calendar mode |
| Functional Safety | — | FuSa documentation (IEC 60730 class B ready) |