ATSAME54-XPRO vs ATSAM4S-XSTK Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ATSAME54-XPRO sa pamamagitan ng Microchip Technology at ATSAM4S-XSTK sa pamamagitan ng Microchip Technology. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Microchip Technology
ATSAME54-XPRO - SAM E54 120MHz Cortex-M4F Evaluation Board | Microchip
ATSAME54-XPRO ✓ NakahandaMicrochip Technology
ATSAM4S-XSTK - SAM4S Xplained Pro ARM Cortex-M4 Starter Kit | Microchip
ATSAM4S-XSTK ✓ NakahandaPagsanggunian na paghahambing
| Parametro | ATSAME54-XPRO | ATSAM4S-XSTK |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Kategorya | Development Boards | Development Boards |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | Evaluation Kit / Development Board | Starter Kit (Evaluation Kit + Extension Boards) |
| Target MCU | ATSAME54P20A | — |
| Core Processor | ARM Cortex-M4F (with FPU and DSP extensions) | — |
| Core Architecture | 32-bit RISC | — |
| Maximum Clock Speed | 120 MHz | — |
| Flash Memory | 1 MB dual-panel Flash with ECC (on target MCU) | 2048 KB (2 MB) |
| SRAM | 256 KB with ECC (on target MCU) | 160 KB |
| Embedded Debugger | Atmel EDBG (onboard, no external probe required) | — |
| Debug Interfaces | 10-pin Cortex Debug (SWD), 20-pin Cortex Debug + ETM (4-bit trace) | — |
| Main Crystal | 12 MHz | — |
| Backup Crystal | 32.768 kHz (RTC reference) | — |
| Backup Power | Supercapacitor for RTC retention | — |
| CAN Transceiver | ATA6561 (CAN-FD capable) | — |
| Extension Headers | 2x Xplained Pro extension headers, mikroBUS socket | — |
| Capture Interface | Parallel Capture Controller (ArduCAM compatible) header | — |
| USB Interfaces | USB-C debug (EDBG), USB-C micro-B device | — |
| Operating System Support | Azure RTOS, Zephyr RTOS, FreeRTOS, TinyGo, MPLAB X, Atmel Studio 7 | — |
| Tindminan RoHS | Compliant | Compliant |
| On-board MCU | — | ATSAM4SD32C |
| Core | — | ARM Cortex-M4 with FPU and DSP extensions |
| Maximum CPU Frequency | — | 120 MHz |
| Low-frequency Crystal | — | 32.768 kHz (0.032768 MHz) |
| Operating Voltage Range (MCU) | — | 1.62 V to 3.6 V |
| USB | — | USB 2.0 Full-Speed Device/Host with on-chip PHY |
| ADC | — | 12-bit, up to 8 channels (per SAM4S family) |
| Communication Peripherals | — | USART x3, UART x2, TWI (I2C) x2, SPI x2, I2S x2, HS USB |
| External Bus Interface | — | Yes (EBI), plus 16-bit SMC (Static Memory Controller) |
| On-board Debugger | — | EDBG (Embedded Debugger) over USB |
| Included Extension Boards | — | I/O1 Xplained Pro, OLED1 Xplained Pro, PROTO1 Xplained Pro |
| Included Cables | — | 2x USB cables |
| Supported IDEs | — | Microchip Studio, Atmel Studio, GCC ARM toolchain |
| Software Framework | — | Atmel Software Framework (ASF) / Harmony |