HCPL-2212-500E vs MAX14854GWE+ Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng HCPL-2212-500E sa pamamagitan ng Broadcom at MAX14854GWE+ sa pamamagitan ng Analog Devices. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Analog Devices
MAX14854GWE+ - 25Mbps Isolated RS-485/RS-422 | Analog Devices
MAX14854GWE+ ✓ NakahandaPagsanggunian na paghahambing
| Parametro | HCPL-2212-500E | MAX14854GWE+ |
|---|---|---|
| Brand | Broadcom | Analog Devices |
| Kategorya | Optocouplers | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Part Number | HCPL-2212-500E | — |
| Manufacturer | Broadcom Limited (formerly Avago Technologies) | — |
| Fungsi | Logic Output Optoisolator | — |
| Rate ng Data | 5 MBd | — |
| Number of Channels | 1 | — |
| Type ng Output | Push-Pull, Totem Pole | — |
| Isolation Voltage | 3750 Vrms | — |
| Common Mode Transient Immunity (CMTI) | 5 kV/µs, 10 kV/µs | — |
| Input Forward Current (IF) | 1.6 mA (typical operating) | — |
| Supply Voltage (VCC) | 4.5 V to 20 V | — |
| Packhaging | 8-DIP Gull Wing (surface mount) | 16-pin WSOIC |
| Uri ng Pagpapasok | Surface Mount | Surface mount |
| Temperature na Operasyon | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Packaging | Tape & Reel (-500E suffix) | — |
| Tindminan RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Isolated full-duplex RS-485/RS-422 transceiver |
| Supply Voltage Range | — | 1.71V to 5.5V |
| Maximum Data Rate | — | 25Mbps |
| Low-Speed Data Rate | — | 500kbps |
| Galvanic Isolation | — | 2.75kV RMS for 60 seconds |
| ESD Protection | — | ±35kV |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Duplex Mode | — | Full duplex |
| Supported Protocols | — | RS-485 and RS-422 |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Isolation Technology | — | [DATA_NEEDED: isolation technology] |
| REACH Status | — | [DATA_NEEDED: REACH status] |