INA2126UA vs INA2126U Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng INA2126UA sa pamamagitan ng Texas Instruments at INA2126U sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
INA2126U - 36V Dual Micropower Instrumentation Amplifier | Texas Instruments
INA2126U ✓ NakahandaPagsanggunian na paghahambing
| Parametro | INA2126UA | INA2126U |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Amplifier ICs | Amplifier ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Amplifier Type | Dual precision instrumentation amplifier | Dual precision instrumentation amplifier |
| Number of Channels | 2 channels | 2 channels |
| Maximum Supply Voltage | 36 V | — |
| Minimum Supply Voltage | 2.7 V | — |
| Quiescent Current per Channel | 175 µA | 175 µA |
| Input Offset Voltage | 250 µV | — |
| Minimum Voltage Gain | 5 V/V | 5 V/V |
| Maximum Voltage Gain | 10,000 V/V | 10000 V/V |
| Gain Error | 0.04% maximum | — |
| Gain-Bandwidth Product | 200 kHz | — |
| Input Noise at 1 kHz | [DATA_NEEDED: input noise at 1 kHz] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Hanay ng Temperature na Operasyon | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Packhaging | 16-pin SOIC (D) | 16-pin SOIC |
| Uri ng Pagpapasok | Surface mount | Surface mount |
| Tindminan RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Maximum Total Supply Voltage | — | 36 V |
| Operating Supply Range | — | ±1.35 V to ±18 V |
| Minimum Total Supply Voltage | — | 2.7 V |
| Maximum Input Offset Voltage | — | 250 µV |
| Typical Gain-Bandwidth Product | — | 200 kHz |
| Typical Input Noise Density at 1 kHz | — | 0.4 nV/√Hz |
| Internal Architecture | — | Two-op-amp instrumentation amplifier |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |