ISO1450BDWR vs ISO1450DWR Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ISO1450BDWR sa pamamagitan ng Texas Instruments at ISO1450DWR sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ NakahandaTexas Instruments
ISO1450DWR - 50Mbps Isolated RS-485/422 | Texas Instruments
ISO1450DWR ✓ NakahandaPagsanggunian na paghahambing
| Parametro | ISO1450BDWR | ISO1450DWR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Fungsi | Isolated half-duplex RS-485 / RS-422 transceiver | — |
| Data Rate (max) | 50 Mbps | — |
| Isolation Voltage (rms) | 5 kVrms (reinforced) | — |
| Number of Drivers / Receivers | 1/1 | — |
| Duplex | Half | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis voltage] | — |
| Supply Voltage VCC1 (logic side) | 3 V to 5.5 V | — |
| Supply Voltage VCC2 (bus side) | Internally generated by isolated DC-DC | — |
| Bus Pin ESD (IEC 61000-4-2) | ±16 kV (air / contact, per datasheet) | — |
| Bus Pin ESD (HBM) | ±4 kV | — |
| IEC 61000-4-4 EFT Immunity | ±4 kV | — |
| Surge Immunity | [DATA_NEEDED: IEC 61000-4-5 surge rating] | — |
| Unit Load | 1/8 (up to 256 nodes on bus) | — |
| Common-Mode Range | Wide common-mode bus voltage range (per datasheet) | — |
| Thermal Shutdown | Yes | — |
| Current Limiting | Yes | — |
| Low-Power Standby | Yes | — |
| Temperature na Operasyon | -40C to +125C | — |
| Packhaging | SOIC-16 wide-body (DW), 16 pins | 16-pin SOIC (DW) |
| Uri ng Pagpapasok | Surface Mount | Surface mount |
| Level ng MSL | 3 (per JEDEC J-STD-020) | — |
| Tindminan RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Compliance Standards | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 | — |
| Product Type | — | Isolated RS-485 and RS-422 transceiver |
| Manufacturer | — | Texas Instruments |
| Maximum Data Rate | — | 50 Mbps |
| Duplex Mode | — | Half-duplex |
| Isolation Voltage | — | 5-kVrms |
| Supported Standards | — | TIA/EIA RS-485 and RS-422 |
| EMC Protection | — | EMC protected |
| ESD Protection | — | Bus pins withstand high-level IEC electrostatic-discharge events |
| EFT Protection | — | Bus pins withstand high-level IEC electrical-fast-transient events |
| Hanay ng Temperature na Operasyon | — | -40°C to +125°C |
| Transceiver Configuration | — | 1 transmitter and 1 receiver |
| Volte ng Pagbibigay | — | [DATA_NEEDED: supply voltage] |
| Logic Output and Input Levels | — | [DATA_NEEDED: electrical logic levels] |
| Receiver and Driver Thresholds | — | [DATA_NEEDED: differential thresholds] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Isolation Resistance | — | [DATA_NEEDED: isolation resistance] |
| Maximum Working Voltage | — | [DATA_NEEDED: maximum working voltage] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Unit Price | — | [DATA_NEEDED: unit price] |