L9638D vs E-L9637D013TR Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng L9638D sa pamamagitan ng STMicroelectronics at E-L9637D013TR sa pamamagitan ng STMicroelectronics. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
STMicroelectronics
L9638D - LIN Bus Transceiver, 20 kbaud, 26 V | STMicroelectronics
L9638D ✓ NakahandaSTMicroelectronics
E-L9637D013TR - ISO 9141 K-Line Bus Driver/Transceiver | STMicroelectronics
E-L9637D013TR ✓ NakahandaPagsanggunian na paghahambing
| Parametro | L9638D | E-L9637D013TR |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | LIN bus transceiver (1/1, half duplex) | — |
| LIN Specification | LIN specification revision 2.0 | — |
| Maximum Transmission Rate | 20 kbaud | — |
| Operating Supply Voltage Range | 6 V to 26 V | — |
| Transient Supply Voltage | 40 V | — |
| Sleep Mode Quiescent Current | 10 uA typical | — |
| Wake-Up | Through LIN bus line | — |
| Enable Input | CMOS input from microcontroller | — |
| Bus Compatibility | ISO 9141 compatible | — |
| Bus Lines | 1 single-wire bidirectional LIN line | — |
| Number of Transceivers | 1 | — |
| Packhaging | SO-8 (8SO), 4.9 mm x 3.9 mm body | 8-SOIC (0.154 inch / 3.90 mm width) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Hanay ng Temperature na Operasyon | [DATA_NEEDED: operating temperature range] | -40 C to +150 C |
| ESD Protection | [DATA_NEEDED: ESD withstand voltage] | — |
| Supply Current (Operating) | [DATA_NEEDED: operating supply current] | — |
| Tindminan RoHS | [DATA_NEEDED: RoHS compliance statement] | Compliant |
| Lead-Free Status | [DATA_NEEDED: lead-free termination statement] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Family | — | L9637 |
| Fungsi | — | ISO 9141 K-Line Bus Driver / Transceiver |
| Number of Drivers/Receivers | — | 1/1 |
| Protocol | — | ISO 9141 (K-Line) |
| Operating Supply Voltage (VS) | — | 4.5 V to 36 V (40 V transient tolerant) |
| Reverse Battery Protection | — | Down to VS = -24 V |
| Supply Current (typ) | — | 2.3 mA |
| K Output Current Limit (typ) | — | 60 mA |
| Standby Current (ISSB) | — | mA @ VCC = 0.5 V (see datasheet) |
| Input Type | — | Logic (TXD) |
| Type ng Output | — | Logic (RXD) |
| Bus Output (K) | — | Open-drain with current-limit, reverse-battery protected |
| Packaging | — | Tape & Reel (TR) |
| Level ng MSL | — | 1 (per JEDEC J-STD-020) |
| Automotive Grade | — | AEC-Q100 qualified (per ST product page) |