LM258DG vs LM258NG Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng LM258DG sa pamamagitan ng onsemi at LM258NG sa pamamagitan ng onsemi. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Pagsanggunian na paghahambing
| Parametro | LM258DG | LM258NG |
|---|---|---|
| Brand | onsemi | onsemi |
| Kategorya | Amplifier ICs | Amplifier ICs |
| Katayuan ng Lifecycle | Aktibo | Unknown |
| Amplifier Type | General Purpose | General Purpose |
| Number of Circuits | 2 circuits | 2 circuits |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Slew Rate | 0.6 V/µs | 0.6 V/µs |
| Minimum Supply Voltage | 3 V | — |
| Maximum Supply Voltage | 32 V | — |
| Hanay ng Temperature na Operasyon | -25 °C to 85 °C | [DATA_NEEDED: operating temperature range] |
| Packhaging | 8-SOIC (0.154 in, 3.90 mm width) | 8-PDIP, 0.300 inch (7.62 mm) pitch |
| Packaging Type | Tube | — |
| Uri ng Pagpapasok | Surface Mount | Through-hole |
| Supply Configuration | Single or split supply | Single supply or split supply |
| Common-Mode Input Range | Extending to ground/VEE | — |
| Bias Current Class | Low bias | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Supply Voltage Range | — | 3 V to 32 V |
| Common-Mode Input Voltage Range | — | Extends to ground/VEE |
| Bilang ng Pin | — | 8 pins |
| Packaging | — | Tube |
| Bias Current | — | [DATA_NEEDED: bias current] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| Output Current | — | [DATA_NEEDED: output current] |