LM2903VDR2G vs LM2903YDT Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng LM2903VDR2G sa pamamagitan ng onsemi at LM2903YDT sa pamamagitan ng STMicroelectronics. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
STMicroelectronics
LM2903YDT - Dual 36V Comparator, SOIC-8 | STMicroelectronics
LM2903YDT ✓ NakahandaPagsanggunian na paghahambing
| Parametro | LM2903VDR2G | LM2903YDT |
|---|---|---|
| Brand | onsemi | STMicroelectronics |
| Kategorya | Amplifier ICs | Amplifier ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Comparator Type | Dual independent precision voltage comparator | Dual differential voltage comparator |
| Number of Channels | 2 channels | 2 channels |
| Supply Voltage Range | 2 V to 36 V | — |
| Single-Supply Input Common-Mode Range | To ground | — |
| Differential Input Voltage Range | ±18 V | — |
| Input Offset Voltage | As low as 2.0 mV | — |
| Response Time | 1.5 µs | — |
| Type ng Output | Open-collector | Open collector |
| Output Logic Capability | Wired-AND operation | — |
| Hanay ng Temperature na Operasyon | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Packhaging | 8-pin SOIC | 8-pin SOIC |
| Uri ng Pagpapasok | Surface mount | Surface mount |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | AEC-Q100 and Q003 or equivalent |
| Input Bias Current | 2 nA to 5 nA | 25 nA typical |
| Tindminan RoHS | ROHS3 compliant | [DATA_NEEDED: RoHS status] |
| Kuru-kuryente ng Pagbibigay | [DATA_NEEDED: typical and maximum supply current] | 0.4 mA typical |
| Single-Supply Voltage Range | — | +2 V to +36 V |
| Dual-Supply Voltage Range | — | ±1 V to ±18 V |
| Power Consumption Per Comparator | — | 1 mW at +5 V |
| Input Offset Current | — | ±5 nA typical |
| Comparison Capability | — | Rail-to-rail |
| Advanced Screening | — | AEC-Q001 and Q002 or equivalent |
| REACH Status | — | [DATA_NEEDED: REACH status] |