LPC18S30FET256 vs LPC4357FET256 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng LPC18S30FET256 sa pamamagitan ng NXP Semiconductors at LPC4357FET256 sa pamamagitan ng NXP Semiconductors. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
NXP Semiconductors
LPC18S30FET256 - 180MHz Cortex-M3 Flashless MCU, 256-LBGA | NXP
LPC18S30FET256 ✓ NakahandaNXP Semiconductors
LPC4357FET256 - Dual-Core Cortex-M4/M0 MCU, 1MB Flash | NXP
LPC4357FET256 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | LPC18S30FET256 | LPC4357FET256 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Kategorya | Microcontrollers | Microcontrollers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Core Architecture | ARM Cortex-M3 | ARM Cortex-M4 + Cortex-M0 (asymmetric dual-core) |
| Core Width | 32-bit | — |
| Maksimum na Taktiko ng Oras | 180 MHz | — |
| On-chip SRAM | 200 kB | — |
| On-chip EEPROM | 4 kB | — |
| On-chip Flash | ROMless (external memory required) | — |
| Packhaging | 256-LBGA (17x17 mm) | LBGA-256 (17 x 17 mm) |
| Operating Voltage | 2.4 V to 3.6 V | — |
| Temperature na Operasyon | -40 C to +85 C | -40 C to +85 C |
| HS-USB Controllers | 2 (one Host/Peripheral, one Host-only) | — |
| Ethernet MAC | 10/100 Mbps with MII/RMII | — |
| External Memory Controller (EMC) | Yes (SRAM/SDRAM/NOR/NAND) | Yes (8/16/32-bit) |
| SPIFI (Quad-SPI Flash Interface) | Yes | — |
| Hardware AES Decryption | Yes | — |
| GPIO Count | Up to 165 | — |
| UART / I2C / CAN / SSP | 4 / 3 / 2 / 2 | — |
| ADC | 10-bit, 8 channels | 10-bit, 8 channels |
| Level ng MSL | 3 | — |
| Uri ng Pagpapasok | Surface Mount | Surface Mount (BGA) |
| Tindminan RoHS | Compliant | Compliant |
| Maximum CPU Clock | — | 204 MHz (both cores) |
| Program Flash Memory | — | 1 MB (dual-bank, with flash accelerator) |
| SRAM | — | 136 kB |
| Operating Voltage (Core) | — | 1.2 V to 1.5 V |
| Operating Voltage (I/O) | — | 2.3 V to 3.6 V |
| USB | — | 2 x HS USB 2.0 with on-chip PHY (Host/OTG/Device) |
| Ethernet | — | 10/100 MAC with MII/RMII |
| LCD Controller | — | Yes |
| State Configurable Timer (SCT) | — | Yes |
| SPI Flash Interface (SPIFI) | — | Yes |
| CAN | — | 2 x CAN 2.0 |