MAX3485ESA+ vs ISL83078EIUZA Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MAX3485ESA+ sa pamamagitan ng Analog Devices at ISL83078EIUZA sa pamamagitan ng Renesas Electronics. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Analog Devices
MAX3485ESA+ - 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3485ESA+ ✓ NakahandaRenesas Electronics
ISL83078EIUZA - 3.3V RS-485/422 Transceiver | Renesas | MSOP-8
ISL83078EIUZA ✓ NakahandaPagsanggunian na paghahambing
| Parametro | MAX3485ESA+ | ISL83078EIUZA |
|---|---|---|
| Brand | Analog Devices | Renesas Electronics |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | RS-485/RS-422 transceiver | — |
| Volte ng Pagbibigay | 3.3 V | — |
| Maximum Data Rate | 10 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Supported Standards | RS-485 and RS-422 | — |
| Driver Architecture | Slew-rate-limited true transceiver | — |
| Packhaging | 8-pin SOIC | MSOP-8 |
| Uri ng Pagpapasok | Surface mount | Surface Mount |
| Power Class | Low-power transceiver | — |
| Production Status | PRODUCTION | — |
| Temperature na Operasyon | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Kuru-kuryente ng Pagbibigay | [DATA_NEEDED: typical and maximum supply current] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Tindminan RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Fungsi | — | Transceiver, RS-422 / RS-485 |
| Number of Drivers / Receivers | — | 1 / 1 |
| Duplex | — | Half |
| Data Rate (max) | — | 20 Mbps (high-speed mode) |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| ESD Protection (bus pins, HBM) | — | ±15 kV |
| Receiver Fail-Safe | — | Full fail-safe (open / short / idle) |
| Slew-Rate Control | — | Yes (SLOPE pin) |
| Unit Load | — | 1 UL (32 nodes per bus) |
| Quiescent Supply Current | — | [DATA_NEEDED: ICC typical] |
| Level ng MSL | — | [DATA_NEEDED: MSL rating] |