MAX485EESA+ vs SN75176ADR Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MAX485EESA+ sa pamamagitan ng Analog Devices at SN75176ADR sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Analog Devices
MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices
MAX485EESA+ ✓ NakahandaTexas Instruments
SN75176ADR - RS-422/RS-485 Differential Bus Transceiver | Texas Instruments
SN75176ADR ✓ NakahandaPagsanggunian na paghahambing
| Parametro | MAX485EESA+ | SN75176ADR |
|---|---|---|
| Brand | Analog Devices | Texas Instruments |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | RS-485/RS-422 Transceiver | Differential bus transceiver |
| Protocol | RS-485, RS-422 | — |
| Duplex | Half-Duplex | — |
| Number of Drivers/Receivers | 1/1 | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| Rate ng Data | Up to 2.5 Mbps | — |
| ESD Protection (Bus Pins, HBM) | ±15 kV | — |
| Driver Slew Rate | Limited (low-EMI) | — |
| Quiescent Supply Current | 1 mA (typical) | — |
| Number of Nodes on Bus | 32 (1/2 unit load) | — |
| Receiver Input Impedance | 96 kΩ (1/2 unit load) | — |
| Hanay ng Temperature na Operasyon | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Packhaging / Kaso | 8-pin SOIC (SO-8, 3.9 mm body) | — |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Lead-Free / RoHS Status | Lead-Free, RoHS compliant | — |
| Level ng MSL | 1 (Unlimited) | — |
| Supported Interface | — | RS-422 and RS-485 |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Packhaging | — | 8-pin SOIC |
| Bilang ng Pins | — | 8 pins |
| Communication Mode | — | Bidirectional |
| Bus Topology | — | Multipoint transmission |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state output |
| Receiver Output State | — | 3-state output |
| Noise Environment | — | Designed for long bus lines in noisy environments |
| ANSI Standard | — | ANSI Standard EIA/TIA-422-B |
| ITU Recommendation | — | ITU Recommendation V.11 |
| Unit Price at Quantity 1 | — | USD 0.4602 as of 2026-10-29 |
| Tindminan RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Differential Input Sensitivity | — | [DATA_NEEDED: differential input sensitivity] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |