SN65HVD52D vs SN65HVD51D Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng SN65HVD52D sa pamamagitan ng Texas Instruments at SN65HVD51D sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
SN65HVD52D - 1 Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD52D ✓ NakahandaTexas Instruments
SN65HVD51D - 5Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD51D ✓ NakahandaPagsanggunian na paghahambing
| Parametro | SN65HVD52D | SN65HVD51D |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | RS-485 / RS-422 full-duplex transceiver | RS-422/RS-485 full-duplex transceiver |
| Driver / Receiver Count | 1 driver and 1 receiver | — |
| Rate ng Data | 1 Mbps | — |
| Volte ng Pagbibigay | 5 V | — |
| Maximum Supply Voltage | 5.5 V | — |
| Temperature na Operasyon | -40 C to +85 C | — |
| Packhaging | 8-pin SOIC (D) | 8-pin SOIC (D) |
| Uri ng Pagpapasok | Surface mount | Surface mount |
| Driver Configuration | Full-duplex | — |
| Bus Standard | RS-485 and RS-422 | — |
| Unit Load | 1/8 unit-load option | — |
| Maximum Bus Nodes | Up to 256 nodes | Up to 256 nodes |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM | Exceeds 15 kV HBM |
| Standby Current | 1 uA | Less than 1 µA |
| Maximum Transmit Delay | 230 ns | — |
| Maximum Supply Current | 8 mA | — |
| Interface Standard | EIA-485-A | — |
| Tindminan RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Maximum Signaling Rate | — | 5 Mbps |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Interface Standards | — | RS-422 and RS-485 |
| Duplex Mode | — | Full-duplex |
| Receiver Unit Load | — | 1/8 unit load |
| Available Driver Transition Rates | — | 1 Mbps, 5 Mbps, and 25 Mbps |
| Hanay ng Temperature na Operasyon | — | -40 °C to 85 °C |
| Enable Architecture | — | Fully enabled; no external enable pins |