STM32F105VCT7 vs STM32F107VCT6 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng STM32F105VCT7 sa pamamagitan ng STMicroelectronics at STM32F107VCT6 sa pamamagitan ng STMicroelectronics. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
STMicroelectronics
STM32F105VCT7 - 72MHz Cortex-M3 MCU 256KB Flash | STMicroelectronics
STM32F105VCT7 ✓ NakahandaSTMicroelectronics
STM32F107VCT6 - 256KB Flash 72MHz Cortex-M3 MCU | STMicroelectronics
STM32F107VCT6 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | STM32F105VCT7 | STM32F107VCT6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Kategorya | Microcontrollers | Microcontrollers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Core | ARM Cortex-M3 32-bit RISC | — |
| Maksimum na Taktiko ng Oras | 72 MHz | 72 MHz |
| Program Memory (Flash) | 256 KB (256K x 8) | — |
| RAM | 64 KB | — |
| Number of I/O Pins | 80 | — |
| Packhaging | 100-LQFP (14x14 mm) | 100-pin LQFP (14x14 mm) |
| Volte ng Pagbibigay | 2.0 V to 3.6 V | — |
| Temperature na Operasyon | -40C to +105C (Grade 7) | — |
| ADC | 2 x 12-bit, up to 16 channels | 2 x 12-bit, up to 16 channels |
| DAC | 2 x 12-bit | — |
| Timers | 10 (general-purpose + advanced-control) | 10 timers (general-purpose + PWM) |
| Communication Interfaces | 5 USART, 3 SPI, 2 I2C, 2 CAN, 1 USB OTG FS, 1 SDIO | — |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Packaging | Tray | — |
| Tindminan RoHS | Compliant | Compliant |
| Core Architecture | — | ARM Cortex-M3 32-bit RISC |
| Flash Memory | — | 256 KB (256K x 8) |
| SRAM | — | 64 KB |
| Supply Voltage Range | — | 2.0 V to 3.6 V |
| Hanay ng Temperature na Operasyon | — | -40 C to +85 C |
| Ethernet MAC | — | 10/100 Mbps with dedicated DMA |
| USB Interface | — | USB 2.0 OTG full-speed (on-chip PHY) |
| CAN Controllers | — | 2 x CAN 2.0B |
| USART / UART | — | 5 USARTs |
| SPI | — | 3 SPIs |
| I2C | — | 2 I2Cs |
| Debug Interface | — | JTAG and SWD |
| Low-Power Modes | — | Sleep, Stop, Standby |
| Level ng MSL | — | [DATA_NEEDED: MSL level] |