TXB0108QPWRQ1 vs TXB0108PWR Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng TXB0108QPWRQ1 sa pamamagitan ng Texas Instruments at TXB0108PWR sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
TXB0108QPWRQ1 - 8-Bit Auto-Direction Level Translator | TI
TXB0108QPWRQ1 ✓ NakahandaTexas Instruments
TXB0108PWR - 8-Bit Bidirectional Level Shifter 100Mbps | TI
TXB0108PWR ✓ NakahandaPagsanggunian na paghahambing
| Parametro | TXB0108QPWRQ1 | TXB0108PWR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Logic ICs | Logic ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Fungsi | 8-bit bidirectional voltage-level translator | — |
| Port A Supply (VCCA) | 1.2 V to 3.6 V | — |
| Port B Supply (VCCB) | 1.65 V to 5.5 V | — |
| Direction Control | Auto-direction sensing | — |
| Output Enable (OE) | Yes, all I/O Hi-Z when low | — |
| ESD Protection (IEC) | ±15 kV (air-gap discharge) on I/O | — |
| Number of Channels | 8 | — |
| Temperature na Operasyon | -40C to +125C | -40C to +85C |
| Automotive Qualification | AEC-Q100 qualified | — |
| Packhaging | TSSOP-20 (PW) | TSSOP-20 (PW) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Type ng Output | Push-pull, symmetrical drive | Push-pull, 3-state |
| Family | TXB | — |
| Tindminan RoHS | Compliant | Compliant |
| Kuru-kuryente ng Pagbibigay | [DATA_NEEDED: ICC max] | — |
| Level ng MSL | [DATA_NEEDED: MSL] | — |
| Bits per Channel | — | 8 |
| Mga Channels | — | 8 |
| Translator Type | — | Bidirectional voltage-level translator, auto-direction sensing |
| A Port Voltage Range | — | 1.2 V to 3.6 V |
| B Port Voltage Range | — | 1.65 V to 5.5 V |
| Max Data Rate | — | 100 Mbps |
| ESD Protection | — | +/-15 kV (HBM) |
| VCC Isolation | — | Yes - outputs high-impedance if either VCC at GND |
| Internal Series Resistance | — | 4 kOhm |
| Latch-Up Performance | — | Exceeds 100 mA per JESD 78, Class II |
| Driver Type | — | Push-pull (totem-pole) CMOS only; not for open-drain buses |