USB2507-ADT vs USB2507-ADD Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng USB2507-ADT sa pamamagitan ng Microchip Technology at USB2507-ADD sa pamamagitan ng Microchip Technology. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Microchip Technology
USB2507-ADT USB 2.0 7-Port Hub Controller | Microchip
USB2507-ADT [data_needed: lifecycle status]Pagsanggunian na paghahambing
| Parametro | USB2507-ADT | USB2507-ADD |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | [DATA NEEDED: Lifecycle Status] | Unknown |
| Product Type | Integrated USB 2.0-compatible 7-port hub controller | — |
| USB Specification Compatibility | USB 2.0 | — |
| Downstream Port Count | 7 ports | 7 ports |
| High-Speed Data Rate | 480 Mbit/s | 480 Mb/s |
| Full-Speed Data Rate | 12 Mbit/s | 12 Mb/s |
| Low-Speed Data Rate | 1.5 Mbit/s | 1.5 Mb/s |
| Transaction Translators | 7 | 7 |
| Clocking | On-board 24 MHz crystal driver circuit or 24 MHz external clock driver | — |
| High-Speed Sampling Architecture | Internal PLL for 480 Mbit/s USB 2.0 sampling | — |
| Internal Supply | Internal 1.8 V linear voltage regulator | — |
| Configuration Methods | Strapping options, external EEPROM, or microcontroller interface | — |
| Power Management | Per-port or ganged selectable power control | — |
| Power-Source Detection | Bus-powered and self-powered source detection | — |
| Integrated USB Components | USB termination and pull-up/pull-down resistors | Termination and pull-up/pull-down resistors |
| Differential-Pin Protection | Internal short-circuit protection | — |
| Packhaging | 80-pin TQFP, 12 x 12 mm | 80-TQFP, 12 x 12 mm |
| Uri ng Pagpapasok | Surface mount | Surface mount |
| Firmware Requirement | No firmware development required | — |
| Tindminan RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Status | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Device Type | — | Integrated USB 2.0-compatible 7-port hub controller |
| USB Compliance | — | Universal Serial Bus Specification Revision 2.0 |
| Upstream Host Attachment | — | Full-speed or full-/high-speed hub |
| Configuration Requirement | — | No firmware development required for standard operation |
| Configuration Interfaces | — | Strapping pins, external EEPROM, microcontroller, SMBus, and serial |
| Microcontroller Interface | — | SMBus slave |
| Downstream Power Management | — | Per-port or ganged, selectable |
| Power Source Detection | — | Bus-powered or self-powered source detection |
| Clock Source | — | On-board 24 MHz crystal driver or 24 MHz external clock |
| Internal PLL | — | 480 MHz USB 2.0 sampling |
| Integrated Regulator | — | 1.8 V linear voltage regulator |
| Differential Pin Protection | — | Internal short-circuit protection |
| Core Voltage | — | 1.8 V low-power core |